Modulation of dimer stability in yeast pyrophosphatase by mutations at the subunit interface and ligand binding to the active site

Yeast (Saccharomyces cerevisiae) pyrophosphatase (Y-PPase) is a tight homodimer with two active sites separated in space from the subunit interface. The present study addresses the effects of mutation of four amino acid residues at the subunit interface on dimer stability and catalytic activity. The W52S variant of Y-PPase is monomeric up to an enzyme concentration of 300 microm, whereas R51S, H87T, and W279S variants produce monomer only in dilute solutions at pH > or = 8.5, as revealed by sedimentation, gel electrophoresis, and activity measurements. Monomeric Y-PPase is considerably more sensitive to the SH reagents N-ethylmaleimide and p-hydroxymercurobenzosulfonate than the dimeric protein. Additionally, replacement of a single cysteine residue (Cys(83)), which is not part of the subunit interface or active site, with Ser resulted in insensitivity of the monomer to SH reagents and stabilization against spontaneous inactivation during storage. Active site ligands (Mg(2+) cofactor, P(i) product, and the PP(i) analog imidodiphosphate) stabilized the W279S dimer versus monomer predominantly by decreasing the rate of dimer to monomer conversion. The monomeric protein exhibited a markedly increased (5-9-fold) Michaelis constant, whereas k(cat) remained virtually unchanged, compared with dimer. These results indicate that dimerization of Y-PPase improves its substrate binding performance and, conversely, that active site adjustment through cofactor, product, or substrate binding strengthens intersubunit interactions. Both effects appear to be mediated by a conformational change involving the C-terminal segment that generally shields the Cys(83) residue in the dimer.     

Catalytic role of the conformational change in succinyl-CoA:3-oxoacid CoA transferase on binding CoA

Catalysis by succinyl-CoA:3-oxoacid CoA transferase proceeds through a thioester intermediate in which CoA is covalently linked to the enzyme. To determine the conformation of the thioester intermediate, crystals of the pig enzyme were grown in the presence of the substrate acetoacetyl-CoA. X-ray diffraction data show the enzyme in both the free form and covalently bound to CoA via Glu305. In the complex, the protein adopts a conformation in which residues 267-275, 280-287, 357-373, and 398-477 have shifted toward Glu305, closing the enzyme around the thioester. Enzymes provide catalysis by stabilizing the transition state relative to complexes with substrates or products. In this case, the conformational change allows the enzyme to interact with parts of CoA distant from the reactive thiol while the thiol is covalently linked to the enzyme. The enzyme forms stabilizing interactions with both the nucleotide and pantoic acid portions of CoA, while the interactions with the amide groups of the pantetheine portion are poor. The results shed light on how the enzyme uses the binding energy for groups remote from the active center of CoA to destabilize atoms closer to the active center, leading to acceleration of the reaction by the enzyme.     

Shift of binding site at the interface between actin and myosin

The molar ratio dependent change in the binding manner between actin and the lysine-rich sequence at the junction between 50K and 20K domains of subfragment 1 was studied by both protease digestion and cross-linking with 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide. The tryptic cleavage site at the function between 50K and 20K was found to be located between the third and fourth lysine residues in the lysine-rich sequence -KKGGKKK-. This site was not protected by actin when the molar ratio of actin to subfragment 1 was 1:1 but was protected at 2:1 and 3:1. The V8 protease cleavage site of chicken subfragment 1 and the elastase cleavage site of rabbit subfragment 1 were found to be located four residues away from the N-terminus of the lysine-rich sequence. Unlike the tryptic cleavage site, this site was protected by actin more when the molar ratio of actin to subfragment 1 was 1:1 than when it was 2:1 and 3:1. To understand the reason for the opposite effect of the molar ratio observed at the middle of and at four residues away from the lysine-rich sequence, actual cross-linked residue(s) was (were) determined by subjecting cross-linked product to a protein sequencer. It was found that the cross-linked sites were mainly at the first and second lysine residues of the lysine-rich sequence when the molar ratio of actin to subfragment 1 was 1:1.(ABSTRACT TRUNCATED AT 250 WORDS)     

A bifunctional allosteric site in the dimer interface of procaspase-3

The dimer interface of caspase-3 contains a bifunctional allosteric site in which the enzyme can be activated or inactivated, depending on the context of the protein. In the mature caspase-3, the binding of allosteric inhibitors to the interface results in an order-to-disorder transition in the active site loops. In procaspase-3, by contrast, the binding of allosteric activators to the interface results in a disorder-to-order transition in the active site. We have utilized the allosteric site to identify a small molecule activator of procaspase and to characterize its binding to the protease. The data suggest that an efficient activator must stabilize the active conformer of the zymogen by expelling the intersubunit linker from the interface, and it must interact with active site residues found in the allosteric site. Small molecule activators that fulfill the two requirements should provide scaffolds for drug candidates as a therapeutic strategy for directly promoting procaspase-3 activation in cancer cells.     

Molecular recognition at the dimer interface of a class mu glutathione transferase: role of a hydrophobic interaction motif in dimer stability and protein function

Cytosolic glutathione (GSH) transferases (GSTs) exist as stable homo- and heterodimers. Interactions at the subunit interface serve an important role in stabilizing the subunit tertiary structures of all GSH transferases. In addition, the dimer is required to maintain functional conformations at the active site on each subunit and the nonsubstrate ligand binding site at the dimer interface [Dirr, H. W. (2001) Chem.-Biol. Interact. 133, 19-23]. In this study, we report on the contribution of a specific intersubunit hydrophobic motif in rGSTM1-1 to dimer stability and protein function. The motif consists of the side chain of F56 from one subunit intercalated between helices 4 and 5 of the second subunit. Replacement of F56 with the hydrophilic side chains of serine, arginine, and glutamate results in a change in the structure of the active site, a marked diminution in catalytic efficiency, and alterations in the ability to bind nonsubstrate ligands. The mutations also affect the ability of the enzyme to bind GSH and the substrate analogue glutathione sulfonate. The functionality of rGSTM1-1 was disrupted to the greatest extent for the F56E mutant. Though mutations at this position do not alter the three-state equilibrium folding process for rGSTM1-1 (i.e., N(2) <--> 2I <--> 2U), destabilizing mutations at position 56 shift the equilibrium between the folded dimer (N(2)) and the monomeric intermediate (I) toward the latter conformational state. The transition to the unfolded state (U) is not significantly affected. The folded monomeric intermediate is also observed by electrospray ionization mass spectrometry. The amount of the intermediate is dependent on protein concentration and the residue at position 56. Mutations at position 56 have little impact on the secondary structure and stability of the monomeric folding intermediate. The dimerization process is proposed to induce a conformational change in the loop containing F56, resulting in improved stability and increased affinity between the M1 subunits.     

Identification of glutamate 344 as the catalytic residue in the active site of pig heart CoA transferase.

The enzyme CoA transferase (succinyl-CoA:3-ketoacid coenzyme A transferase [3-oxoacid CoA transferase], EC 2.8.3.5) is essential for the metabolism of ketone bodies in the mammalian mitochondrion. It is known that its catalytic mechanism involves the transient thioesterification of an active-site glutamate residue by CoA. As a means of identifying this glutamate within the sequence, we have made use of a fortuitous autolytic fragmentation that occurs at the active site when the enzyme-CoA covalent intermediate is heated. The presence of protease inhibitors has no effect on the extent of cleavage detectable by SDS-PAGE, supporting the view that this fragmentation is indeed autolytic. This fragmentation can be carried out on intact CoA transferase, as well as on a proteolytically nicked but active form of the enzyme. Because the resulting C-terminal fragment is blocked at its N-terminus by a pyroglutamate moiety, it is not amenable to direct sequencing by the Edman degradation method. As an alternative, we have studied a peptide (peptide D) generated specifically by autolysis of the nicked enzyme and predicted to have an N-terminus corresponding to the site of proteolysis and a C-terminus determined by the site of autolysis. This peptide was purified by reversed-phase HPLC and subsequently characterized by electrospray mass spectrometry. We have obtained a mass value for peptide D, from which it can be deduced that glutamate 344, known to be conserved in all sequenced CoA transferases, is the catalytically active amino acid. This information should prove useful to future mutagenesis work aimed at better understanding the active-site structure and catalytic mechanism of CoA transferase.     

Disruption of the tryptophan binding site in the human serum albumin dimer

Monomer and dimer fractions of human serum albumin (HSA) obtained from charcoal-treated Fraction V HSA have very similar fluorescence and circular dichroism spectra, but the dimer neither binds l-tryptophan nor reacts rapidly with p-nitrophenyl acetate. The latter reaction presumably occurs in a major binding site of the monomer as many strongly bound ligands including l-tryptophan, small fatty acid anions (e.g., S.-W. M. Koh and G. E. Means, 1979, Arch. Biochem. Biophys.192, 73–79), and several drugs (e.g, N. P. Sollenne and G. E. Means, 1979, Mol. Pharmacol.15, 754–757) all decrease rates of reaction in direct proportion to their concentration. Binding data for those ligands indicate the presence of less than one binding site per molecule of charcoal-treated Fraction V HSA, and thus appear to reflect only its content of albumin monomer. The absence of that binding site in the dimer may reflect its inclusion within the dimer interface.     

Disruption of the coenzyme binding site and dimer interface revealed in the crystal structure of mitochondrial aldehyde dehydrogenase "Asian" variant

Mitochondrial aldehyde dehydrogenase (ALDH2) is the major enzyme that oxidizes ethanol-derived acetaldehyde. A nearly inactive form of the enzyme, ALDH2*2, is found in about 40% of the East Asian population. This variant enzyme is defined by a glutamate to lysine substitution at residue 487 located within the oligomerization domain. ALDH2*2 has an increased Km for its coenzyme, NAD+, and a decreased kcat, which lead to low activity in vivo. Here we report the 2.1 A crystal structure of ALDH2*2. The structure shows a large disordered region located at the dimer interface that includes much of the coenzyme binding cleft and a loop of residues that form the base of the active site. As a consequence of these structural changes, the variant enzyme exhibits rigid body rotations of its catalytic and coenzyme-binding domains relative to the oligomerization domain. These structural perturbations are the direct result of the inability of lysine 487 to form important stabilizing hydrogen bonds with arginines 264 and 475. Thus, the elevated Km for coenzyme exhibited by this variant probably reflects the energetic penalty for reestablishing this site for productive coenzyme binding, whereas the structural alterations near the active site are consistent with the lowered Vmax.     

Structure of the mammalian CoA transferase from pig heart

Ketoacidosis affects patients who are deficient in the enzyme activity of succinyl-CoA:3-ketoacid CoA transferase (SCOT), since SCOT catalyses the activation of acetoacetate in the metabolism of ketone bodies. Thus far, structure/function analysis of the mammalian enzyme has been predicted based on the three-dimensional structure of a CoA transferase determined from an anaerobic bacterium that utilizes its enzyme for glutamate fermentation. To better interpret clinical data, we have determined the structure of a mammalian CoA transferase from pig heart by X-ray crystallography to 2.5 A resolution. Instrumental to the structure determination were selenomethionine substitution and the use of argon during purification and crystallization. Although pig heart SCOT adopts an alpha/beta protein fold, resembling the overall fold of the bacterial CoA transferase, several loops near the active site of pig heart SCOT follow different paths than the corresponding loops in the bacterial enzyme, accounting for differences in substrate specificities. Two missense mutations found associated with SCOT of ketoacidosis patients were mapped to a location in the structure that might disrupt the stabilization of the amino-terminal strand and thereby interfere with the proper folding of the protein into a functional enzyme.     

Implications of the ligandin binding site on the binding of non-substrate ligands to Schistosoma japonicum-glutathione transferase

The binding interactions between dimeric glutathione transferase from Schistosoma japonicum (Sj26GST) and bromosulfophthalein (BS) or 8-anilino-1-naphthalene sulfonate (ANS) were characterised by fluorescence spectroscopy and isothermal titration calorimetry (ITC). Both ligands inhibit the enzymatic activity of Sj26GST in a non-competitive form. A stoichiometry of 1 molecule of ligand per mole of dimeric enzyme was obtained for the binding of these ligands. The affinity of BS is higher (K(d)=3.2 microM) than that for ANS (K(d)=195 microM). The thermodynamic parameters obtained by calorimetric titrations are pH-independent in the range of 5.5 to 7.5. The interaction process is enthalpically driven at all the studied temperatures. This enthalpic contribution is larger for the ANS anion than for BS. The strongly favourable enthalpic contribution for the binding of ANS to Sj26GST is compensated by a negative entropy change, due to enthalpy-entropy compensation. DeltaG degrees remains almost invariant over the temperature range studied. The free energy change for the binding of BS to Sj26GST is also favoured by entropic contributions at temperatures below 32 degrees C, thus indicating a strong hydrophobic interaction. Heat capacity change obtained for BS (DeltaC(p) degrees =(-580.3+/-54.2) cal x K(-1) mol(-1)) is twofold larger (in absolute value) than for ANS (DeltaC(p) degrees =(-294.8+/-15.8) cal x K(-1) mol(-1)). Taking together the thermodynamic parameters obtained for these inhibitors, it can be argued that the possible hydrophobic interactions in the binding of these inhibitors to L-site must be accompanied by other interactions whose contribution is enthalpic. Therefore, the non-substrate binding site (designed as ligandin) on Sj26GST may not be fully hydrophobic.     

Purification and properties of an acyl CoA transferase from Ascaris suum muscle mitochondria

An acyl CoA transferase has been purified to electrophoretic homogeneity from the soluble compartment of Ascaris suum muscle mitochondria. From SDS-PAGE, isoelectric focusing and molecular exclusion chromatography, homogeneity was confirmed and the enzyme appears to be composed of two similar or identical subunits of apparent mol. wts of 50,000 resulting in an apparent mol. wt of 100,000 for the holoenzyme. The apparent isoelectric point was 5.6 +/- 0.1 by both chromatofocusing columns and slab gel isoelectric focusing. The transferase was relatively specific for the short, straight-chain acyl CoA donors as well as the CoA acceptors, being active on acetyl CoA, propionyl CoA, butyryl CoA, valeryl CoA and hexanoyl CoA as donors to acetate and propionate. Neither succinyl CoA nor succinate were appreciably active as CoA donor or acceptor, respectively. This enzyme cannot serve physiologically to activate succinate for decarboxylation to propionate, but may serve to ensure a supply of propionyl CoA which appears to be required in catalytic amounts for the decarboxylation of succinate.     

Exploring the possible binding sites at the interface of triosephosphate isomerase dimer as a potential target for anti-tripanosomal drug design

To explore the possible binding sites at the interface of tripanosomal triosephosphate isomerase, fully flexible benzothiazoles were docked onto the dimer interface. Docking studies revealed that the most favorable interactions occur in the aromatic clusters of the dimeric form. Hence is purposed that the dimer disruption is not via Cys 15, as presented in last studies, but it could be carried out through the unstabilization of pi-pi interactions of two aromatic clusters present in the interface. These studies enable a novel alternative for rational structure-based anti-tripanosomal drug design.     

Involvement of helices at the dimer interface in ClC-1 common gating

ClC-1 is a dimeric, double-pored chloride channel that is present in skeletal muscle. Mutations of this channel can result in the condition myotonia, a muscle disorder involving increased muscle stiffness. It has been shown that the dominant form of myotonia often results from mutations that affect the so-called slow, or common, gating process of the ClC-1 channel. Mutations causing dominant myotonia are seen to cluster at the interface of the ClC-1 channel monomers. This study has investigated the role of the H, I, P, and Q helices, which lie on this interface, as well as the G helix, which is situated immediately behind the H and I helices, on ClC-1 gating. 11 mutant ClC-1 channels (T268M, C277S, C278S, S289A, T310M, S312A, V321S, T539A, S541A, M559T, and S572V) were produced using site-directed mutagenesis, and gating properties of these channels were investigated using electrophysiological techniques. Six of the seven mutations in G, H, and I, and two of the four mutations in P and Q, caused shifts of the ClC-1 open probability. In the majority of cases this was due to alterations in the common gating process, with only three of the mutants displaying any change in fast gating. Many of the mutant channels also showed alterations in the kinetics of the common gating process, particularly at positive potentials. The changes observed in common gating were caused by changes in the opening rate (e.g. T310M), the closing rate (e.g. C277S), or both rates. These results indicate that mutations in the helices forming the dimer interface are able to alter the ClC-1 common gating process by changing the energy of the open and/or closed channel states, and hence altering transition rates between these states.     

Sulfhydryl group reactivity in the Escherichia coli CoA transferase.

The acetyl-CoA:acetoacetate CoA-transferase of Escherichia coli has the subunit structure α₂β₂ The enzyme contains six sulfhydryl groups, one per α chain and two per β chain, and no disulfides. The rates and extent of sulfhydryl group reactivity with 5,5′-dithiobis(2-nitrobenzoic acid) were compared in the free enzyme, the enzyme-CoA intermediate in the catalytic pathway, and a substrate analog-enzyme Michaelis complex. The analog used was acetylaminodesthio-CoA, a competitive inhibitor with respect to acetyl-CoA; the analog is not a substrate. The reactions were studied in the presence and absence of 10% glycerol. In the absence of glycerol, one sulfhydryl group reacted rapidly in the free enzyme and enzyme-CoA intermediate; relative to the free enzyme, the rate and number of subsequently reacting sulfhydryl groups were increased in the enzyme-CoA intermediate. In the presence of 10% glycerol, one sulfhydryl group reacted rapidly in the free enzyme, while two reacted rapidly in the enzyme-CoA compound; the rates and extents of subsequently reacting sulfhydryl groups were also enhanced in the enzyme-CoA compound. The data strongly suggested subunit interactions in the free enzyme and intermediate; glycerol abolished those interactions in the enzyme-CoA intermediate. In the absence of glycerol, sulfhydryl group reactivity in the Michaelis complex, enzyme-acetylaminodesthio-CoA, was similar to that in the free enzyme with one exception: One of the more slowly reacting sulfhydryl groups in the free enzyme reacted at a rate characteristic of the enzyme-CoA intermediate. The results obtained with N-ethylmaleimide were qualitatively similar. The fractional inactivation of the enzyme with N-ethylmaleimide as a function of sulfhydryl groups modified and the subunit location of those sulfhydryl groups indicated that the same sulfhydryl groups react in both enzyme species; however, those sulfhydryl groups reacted more rapidly in the enzyme-CoA compound. The data indicate both subunit interactions in the enzyme and characteristic conformational changes upon formation of an acyl-CoA-enzyme Michaelis complex and the enzyme-CoA intermediate.     

Complex interactions at the helix-helix interface stabilize the glycophorin A transmembrane dimer

To explore the residue interactions in the glycophorin A dimerization motif, an alanine scan double mutant analysis at the helix-helix interface was carried out. These data reveal a combination of additive and coupled effects. The majority of the double mutants are found to be equally or slightly more stable than would be predicted by the sum of the energetic cost of the single-point mutants. The proximity of the mutated sites is not related to the presence of coupling between those sites. Previous studies reveal that a single face of the glycophorin A monomer contains a specific glycine-containing motif (GxxxG) that is thought to be a driving force for the association of transmembrane helices. Double mutant cycles suggest that the relationship of the GxxxG motif to the remainder of the helix-helix interface is complex. Sequences containing mutations that abolish the GxxxG motif retain an ability to dimerize, while a sequence containing a GxxxG motif appears unable to form dimers. The energetic effects of weakly coupled and additive double mutants can be explained by changes in van der Waals interactions at the dimer interface. These results emphasize the fact that the sequence context of the dimer interface modulates the strength of the glycophorin A GxxxG-mediated transmembrane dimerization reaction.     

Altered dimer interface decreases stability in an amyloidogenic protein

Amyloidoses are devastating and currently incurable diseases in which the process of amyloid formation causes fatal cellular and organ damage. The molecular mechanisms underlying amyloidoses are not well known. In this study, we address the structural basis of immunoglobulin light chain amyloidosis, which results from deposition of light chains produced by clonal plasma cells. We compare light chain amyloidosis protein AL-09 to its wild-type counterpart, the kappaI O18/O8 light chain germline. Crystallographic studies indicate that both proteins form dimers. However, AL-09 has an altered dimer interface that is rotated 90 degrees from the kappaI O18/O8 dimer interface. The three non-conservative mutations in AL-09 are located within the dimer interface, consistent with their role in the decreased stability of this amyloidogenic protein. Moreover, AL-09 forms amyloid fibrils more quickly than kappaI O18/O8 in vitro. These results support the notion that the increased stability of the monomer and delayed fibril formation, together with a properly formed dimer, may be protective against amyloidogenesis. This could open a new direction into rational drug design for amyloidogenic proteins.     

Ionization of His 55 at the dimer interface of dynein light-chain LC8 is coupled to dimer dissociation

LC8 is a highly conserved light-chain subunit of cytoplasmic dynein that interacts with a wide variety of cellular proteins and is presumed to play a fundamental role in dynein assembly and cargo recruitment and in the assembly of protein complexes unrelated to dynein. LC8 is a dimer at physiological pH but dissociates to a folded monomer at pH < 4.8. We have suggested that acid-induced dimer dissociation is due to protonation of His 55, which is stacked against His 55' and completely buried in the dimer interface. In this work, we show that the pH-induced dissociation is reversible and indeed governed by the ionization state of His 55. Mutagenesis of His 55 to Lys results in a monomer in the pH range of 3-8, while the mutation to Ala results in a dimer in the same pH range. Mutations that disrupt intermolecular hydrogen bonds between Tyr 65 and Lys 44' and His 55 and Thr 67' do not change the association state of the dimer. Titration curves for His 55 and the two other histidines, His 72 and 68, were determined by (13)C-(1)H NMR for H55K and for WT-LC8 in the monomeric and dimeric states. The pK(a) values of His 72 and His 68 are 6 in the WT dimer and 6.2-6.5 in monomeric H55K, while the pK(a) of His 55 is about 4.5 in the WT dimer. These results indicate that deprotonation of His 55 is linked to dimer formation and that mutation of His 55 to a small neutral residue or to a positively charged residue uncouples the protonation and dissociation processes.     

Effects of dimer interface mutations in Hin recombinase on DNA binding and recombination

Previous biochemical assays and a structural model of the protein have indicated that the dimer interface of the Hin recombinase is composed of two alpha-helices. To elucidate the structure and function of the helix, amino acids at the N-terminal end of the helix, where the two helices make their most extensive contact, were randomized, and inversion-incompetent mutants were selected. To investigate why the mutants lost their inversion activities, the DNA binding, hix pairing, invertasome formation, and DNA cleavage activities were assayed using in vivo and in vitro methodologies. The results indicated that the mutants could be divided into four classes based on their DNA binding activity. We propose that the alpha-helices might serve to place a DNA binding motif of Hin in the correct spatial relationship to the minor groove of the recombination site. All the mutants except those that failed to bind DNA were able to perform hix pairing and invertasome formation, suggesting that the dimer interface is not involved in either of these processes. The inversion-incompetent phenotype of the binders was caused by the inability of mutants to perform DNA cleavage. The mutants that showed less binding ability than the wild type nevertheless exhibited a wild-type level of hix pairing activity, because the hix pairing activity overcomes the defect in DNA binding. This phenotype of the mutants that are impaired in DNA binding suggests that the binding domains of Hin may mediate Hin-Hin interaction during hix pairing.