Crystallization, crystal structure analysis and preliminary molecular model of the bilin binding protein from the insect Pieris brassicae

The bilin binding protein of the butterfly Pieris brassicae has been prepared, crystallized and its crystal structure determined at high resolution using film and FAST area detector intensity data. The crystallographic asymmetric unit contains a tetramer of identical subunits with a molecular weight of about 90,000. The crystal structure was determined by isomorphous replacement. Use was made of the molecular symmetry to improve phases. A molecular interpretation of the electron density distribution and partial tracing of the polypeptide chain was possible without amino acid sequence information, as the fold is very similar to retinol binding protein. It is characterized by a beta-barrel formed by two orthogonal beta-sheets and an alpha-helix. The bilin pigment seems to be bound within the beta-barrel analogously to retinol in retinol binding protein. The tetramer in the crystal has C2 symmetry and is a dimer of dimers of quasi-equivalent subunits.     

Structural basis for GroEL-assisted protein folding from the crystal structure of (GroEL-KMgATP)14 at 2.0A resolution

Nucleotide regulates the affinity of the bacterial chaperonin GroEL for protein substrates. GroEL binds protein substrates with high affinity in the absence of ATP and with low affinity in its presence. We report the crystal structure of (GroEL-KMgATP)(14) refined to 2.0 A resolution in which the ATP triphosphate moiety is directly coordinated by both K(+) and Mg(2+). Upon the binding of KMgATP, we observe previously unnoticed domain rotations and a 102 degrees rotation of the apical domain surface helix I. Two major consequences are a large lateral displacement of, and a dramatic reduction of hydrophobicity in, the apical domain surface. These results provide a basis for the nucleotide-dependent regulation of protein substrate binding and suggest a mechanism for GroEL-assisted protein folding by forced unfolding.     

Crystal structure of a transcarbamylase-like protein from the anaerobic bacterium Bacteroides fragilis at 2.0 A resolution

A transcarbamylase-like protein essential for arginine biosynthesis in the anaerobic bacterium Bacteroides fragilis has been purified and crystallized in space group P4(3)2(1)2 (a=b=153.4 A, c=94.8 A). The structure was solved using a single isomorphous replacement with anomalous scattering (SIRAS) and was refined at 2.0 A resolution to an R-factor of 20.6% (R-free=25.2%). The molecular model is trimeric and comprises 960 amino acid residues, two phosphate groups and 422 water molecules. The monomer has the consensus transcarbamylase fold with two structural domains linked by two long interdomain helices: the putative carbamoyl phosphate-binding domain and a binding domain for the second substrate. Each domain has a central parallel beta-sheet surrounded by alpha-helices and loops with alpha/beta topology. The putative carbamoyl phosphate-binding site is similar to those in ornithine transcarbamylases (OTCases) and aspartate transcarbamylases (ATCases); however, the second substrate-binding site is strikingly different. This site has several insertions and deletions, and residues critical to substrate binding and catalysis in other known transcarbamylases are not conserved. The three-dimensional structure and the fact that this protein is essential for arginine biosynthesis suggest strongly that it is a new member of the transcarbamylase family. A similar protein has been found in Xylella fastidiosa, a bacterium that infects grapes, citrus and other plants.     

Three-dimensional structure of catalase from Penicillium vitale at 2.0 A resolution

The three-dimensional structure analysis of crystalline fungal catalase from Penicillium vitale has been extended to 2.0 A resolution. The crystals belong to space group P3(1)21, with the unit cell parameters of a = b = 144.4 A and c = 133.8 A. The asymmetric unit contains half a tetrameric molecule of 222 symmetry. Each subunit is a single polypeptide chain of approximately 670 amino acid residues and binds one heme group. The amino acid sequence has been tentatively determined by computer graphics model building (using the FRODO system) and comparison with the known sequence of beef liver catalase. The atomic model has been refined by the Hendrickson & Konnert (1981) restrained least-squares program against 68,000 reflections between 5 A and 2 A resolution. The final R-factor is 0.31 after 24 refinement cycles. The secondary and tertiary structure of the catalase has been analyzed.     

X-ray structure and refinement of carbon-monoxy (Fe II)-myoglobin at 1.5 A resolution

The structure of carbon-monoxy (Fe II) myoglobin at 260 K has been solved at a resolution of 1.5 A by X-ray diffraction and a model refined against the X-ray data by restrained least-squares. The CO ligand is disordered and distorted from the linear conformation seen in model compounds. At least two conformations, with Fe--C--O angles of 140 degrees and 120 degrees, are required to model the system. The heme pocket is significantly larger than in deoxy-myoglobin because the distal residues have relaxed around the ligand; the largest displacement occurs for the distal histidine side-chain, which moves more than 1.4 A on ligand binding. The side-chain of Arg45 (CD3) is disordered and apparently exists in two equally populated conformations. One of these does not block the motion of the distal histidine out of the binding pocket, suggesting a mechanism for ligand entry. The heme group is planar (root-mean-square deviation from planarity is 0.08 A) with no doming of the pyrrole groups. The Fe--N epsilon 2 (His93) bond length is 2.2 A and the Fe--C bond length in the CO complex is 1.9 A. The iron is the least-squares plane of the heme, and this leads to the proximal histidine moving by 0.4 A relative to its position in deoxy-myoglobin. This shift correlates with a global structural change, with the proximal part of the molecule translated towards the heme plane.     

Crystal structure of Rab geranylgeranyltransferase at 2.0 A resolution

BACKGROUND: Rab geranylgeranyltransferase (RabGGT) catalyzes the addition of two geranylgeranyl groups to the C-terminal cysteine residues of Rab proteins, which is crucial for membrane association and function of these proteins in intracellular vesicular trafficking. Unlike protein farnesyltransferase (FT) and type I geranylgeranyltransferase, which both prenylate monomeric small G proteins or short peptides, RabGGT can prenylate Rab only when Rab is in a complex with Rab escort protein (REP). RESULTS: The crystal structure of rat RabGGT at 2.0 A resolution reveals an assembly of four distinct structural modules. The beta subunit forms an alpha-alpha barrel that contains most of the residues in the active site. The alpha subunit consists of a helical domain, an immunoglobulin (Ig)-like domain, and a leucine-rich repeat (LRR) domain. The N-terminal region of the alpha subunit binds to the active site in the beta subunit; residue His2alpha directly coordinates a zinc ion. The prenyl-binding pocket of RabGGT is deeper than that in FT. CONCLUSIONS: LRR and Ig domains are often involved in protein-protein interactions; in RabGGT they might participate in the recognition and binding of REP. The binding of the N-terminal peptide of the alpha subunit to the active site suggests an autoinhibition mechanism that might contribute to the inability of RabGGT to recognize short peptides or Rab alone as its substrate. Replacement of residues Trp102beta and Tyr154beta in FT by Ser48beta and Leu99beta, respectively, in RabGGT largely determine the different lipid-binding specificities of the two enzymes.     

Crystal structure analysis, refinement and enzymatic reaction mechanism of N-carbamoylsarcosine amidohydrolase from Arthrobacter sp. at 2.0 A resolution.

N-carbamoylsarcosine amidohydrolase from Arthrobacter sp., a tetramer of polypeptides with 264 amino acid residues each, has been crystallized and its structure solved and refined at 2.0 A resolution, to a crystallographic R-factor of 18.6%. The crystals employed in the analysis contain one tetramer of 116,000 M(r) in the asymmetric unit. The structure determination proceeded by multiple isomorphous replacement, followed by solvent-flattening and density averaging about the local diads within the tetramer. In the final refined model, the root-mean-square deviation from ideality is 0.01 A for bond distances and 2.7 degrees for bond angles. The asymmetric unit consists of 7853 protein atoms, 431 water molecules and four sulfate ions bound into the putative active site clefts in each subunit. One subunit contains a central six-stranded parallel beta-pleated sheet packed by helices on both sides. On one side, two helices face the solvent, while two of the helices on the other side are buried in the tight intersubunit contacts. The catalytic center of the enzyme, tentatively identified by inhibitor binding, is located at the interface between two subunits and involves residues from both. It is suggested that the nucleophilic group involved in hydrolysis of the substrate is the thiol group of Cys117 and a nucleophilic addition-elimination mechanism is proposed.     

Crystal structure of an Escherichia coli tRNA(Gly) microhelix at 2.0 A resolution

tRNA identity elements determine the correct aminoacylation by the cognate aminoacyl-tRNA synthetase. In class II aminoacyl tRNA synthetase systems, tRNA specificity is assured by rather few and simple recognition elements, mostly located in the acceptor stem of the tRNA. Here we present the crystal structure of an Escherichia coli tRNA(Gly) aminoacyl stem microhelix at 2.0 A resolution. The tRNA(Gly) microhelix crystallizes in the space group P3(2)21 with the cell constants a=b=35.35 A, c=130.82 A, gamma=120 degrees . The helical parameters, solvent molecules and a potential magnesium binding site are discussed.     

Crystal structure of the tetrameric cytidine deaminase from Bacillus subtilis at 2.0 A resolution

Cytidine deaminases (CDA, EC 3.5.4.5) are zinc-containing enzymes in the pyrimidine salvage pathway that catalyze the formation of uridine and deoxyuridine from cytidine and deoxycytidine, respectively. Two different classes have been identified in the CDA family, a homodimeric form (D-CDA) with two zinc ions per dimer and a homotetrameric form (T-CDA) with four zinc ions per tetramer. We have determined the first structure of a T-CDA from Bacillus subtilis. The active form of T-CDA is assembled of four identical subunits with one active site apiece. The subunit of D-CDA is composed of two domains each exhibiting the same fold as the T-CDA subunits, but only one of them contains zinc in the active site. The similarity results in a conserved structural core in the two CDA forms. An intriguing difference between the two CDA structures is the zinc coordinating residues found at the N-terminal of two alpha-helices: three cysteine residues in the tetrameric form and two cysteine residues and one histidine residue in the dimeric form. The role of the zinc ion is to activate a water molecule and thereby generate a hydroxide ion. How the zinc ion in T-CDA surrounded with three negatively charged residues can create a similar activity of T-CDA compared to D-CDA has been an enigma. However, the structure of T-CDA reveals that the negative charge caused by the three ligands is partly neutralized by (1) an arginine residue hydrogen-bonded to two of the cysteine residues and (2) the dipoles of two alpha-helices.     

Three-dimensional structure of Cu,Zn-superoxide dismutase from spinach at 2.0 A resolution

The three-dimensional structure of Cu,Zn-superoxide dismutase from spinach leaves has been determined by X-ray crystal structure analysis. The atomic coordinates were refined at 2.0 A resolution using the Hendrickson and Konnert program for stereochemically restrained refinement against structure factors, which allowed the use of non-crystallographic symmetry. The crystallographic residual error for the refined model was 24.9%, with a root mean square deviation of 0.03 A from the ideal bond length and an average atomic temperature factor of 9.6 A. A dimeric molecule of the enzyme is comprised of two identical subunits related by a non-crystallographic 2-fold axis. Each subunit of 154 amino acid residues is composed primarily of eight anti-parallel beta-strands that form a flattened cylinder, plus three external loops. The main-chain hydrogen bonds primarily link the beta-strands. The overall structure of this enzyme is quite similar to that of the bovine dismutase except for some parts. The single disulfide bridge (Cys57-Cys146) and the salt bridge (Arg79-Asp101) may stabilize the loop regions of the structure. The Cu2+ and Zn2+ ions in the active site lie 6.1 A apart at the bottom of the long channel. The Cu2+ ligands (ND1 of His-46, and NE2 of His-48, -63, and -120) show an uneven tetrahedral distortion from a square plane. The Zn2+ ligands (ND1 of His-63, -71, and -80 and OD1 of Asp-83) show an almost tetrahedral geometry. The imidazole ring of His-63 forms a bridge between the Cu2+ and Zn2+ ions.(ABSTRACT TRUNCATED AT 250 WORDS)     

Crystal structure of a secretory signalling glycoprotein from sheep at 2.0A resolution

A 40kDa glycoprotein from dry secretion of sheep is implicated as a signaling factor and is named as SPS-40. This protein is secreted only during the early phase of involution when the drastic tissue remodeling occurs in the mammary gland. SPS-40 was purified from sheep dry secretions and crystallized using hanging drop vapour diffusion method. The crystals belong to orthorhombic space group P2(1)2(1)2(1) with cell dimensions, a=62.7A, b=66.4A, c=107.5A. The protein was also cloned for the determination of its complete amino acid sequence. The three-dimensional structure of SPS-40 was determined by X-ray crystallographic method at 2.0A resolution. The structure revealed the presence of an N-linked glycan chain at Asn39. The protein adopts a conformation with a classical (beta/alpha)(8)-barrel fold of triosephosphate isomerase (TIM) (residues 1-237 and 310-360) with an insertion of a small (alpha+beta) domain (residues 240-307) similar to that observed in chitinases. However, the Leu substitution for Glu in the consensus catalytic sequence in SPS-40 causes a loss of chitinase activity. Furthermore, the sugar-binding groove in SPS-40 is distorted considerably from the standard chitin-binding site in chitinase enzymes and hence the binding of chitin-like oligosaccharides is considerably hampered. Three surface loops, His188-His197, Phe202-Arg212 and Phe244-Pro260 have exceptionally high values of B-factors (average=70.5A(2)), indicating the presence of a less defined region.     

Crystal structure of N-acyl-D-glucosamine 2-epimerase from porcine kidney at 2.0 A resolution

The X-ray crystallographic structure of N-acyl-d-glucosamine 2-epimerase (AGE) from porcine kidney, which has been identified to be a renin-binding protein (RnBP), was determined by the multiple isomorphous replacement method and refined at 2.0 A resolution with a final R-factor of 16.9 % for 15 to 2.0 A resolution data. The refined structure of AGE comprised 804 amino acid residues (one dimer) and 145 water molecules. The dimer of AGE had an asymmetric unit with approximate dimensions 46 Ax48 Ax96 A. The AGE monomer is composed of an alpha(6)/alpha(6)-barrel, the structure of which is found in glucoamylase and cellulase. One side of the AGE alpha(6)/alpha(6)-barrel structure comprises long loops containing five short beta-sheets, and contributes to the formation of a deep cleft shaped like a funnel. The putative active-site pocket and a possible binding site for the substrate N-acetyl-d-glucosamine (GlcNAc) were found in the cleft. The other side of the alpha(6)/alpha(6)-barrel comprises short loops and contributes to the dimer formation. At the dimer interface, which is composed of the short loops and alpha-helices of the subunits, five strong ion-pair interactions were observed, which play a major role in the dimer assembly. This completely ruled out the previously accepted hypothesis that the formation of the RnBP homodimer and RnBP-renin heterodimer requires the leucine zipper motif present in RnBP.     

Crystal structure of the protein serine/threonine phosphatase 2C at 2.0 A resolution.

Protein phosphatase 2C (PP2C) is a Mn2+- or Mg2+-dependent protein Ser/Thr phosphatase that is essential for regulating cellular stress responses in eukaryotes. The crystal structure of human PP2C reveals a novel protein fold with a catalytic domain composed of a central beta-sandwich that binds two manganese ions, which is surrounded by alpha-helices. Mn2+-bound water molecules at the binuclear metal centre coordinate the phosphate group of the substrate and provide a nucleophile and general acid in the dephosphorylation reaction. Our model presents a framework for understanding not only the classical Mn2+/Mg2+-dependent protein phosphatases but also the sequence-related domains of mitochondrial pyruvate dehydrogenase phosphatase, the Bacillus subtilus phosphatase SpoIIE and a 300-residue domain within yeast adenyl cyclase. The protein architecture and deduced catalytic mechanism are strikingly similar to the PP1, PP2A, PP2B family of protein Ser/Thr phosphatases, with which PP2C shares no sequence similarity, suggestive of convergent evolution of protein Ser/Thr phosphatases.     

The refined crystal structure of ribonuclease A at 2.0 A resolution

This paper describes the structure of bovine pancreatic ribonuclease A, refined by a restrained parameter least squares procedure at 2.0 A resolution, and rebuilt using computer graphics. The final agreement factor (formula see text) is 0.159. The positions of the 951 main chain atoms have been determined with an estimated accuracy of 0.17 A. In addition, the model includes a phosphate group in the active site and 176 waters, many of them with partial occupancy. The bond lengths in the refined structure of RNase A differ from the ideal values by an overall root mean square deviation of 0.022 A; the corresponding value for angle distances is 0.06 A. The root mean square deviation of planar atoms from ideality is 0.017 A, and root mean square deviation of the peptide torsion angles from 180 degrees is 3.4 degrees. The model is in good agreement with the final difference Fourier maps. Two active site histidines, His 12 and His 119, form hydrogen bonds to the phosphate ion. His 119 is also hydrogen bonded to the carboxyl of ASp 121 and His 12 to the carbonyl of Thr 45. The structure of the RNase A is very similar to that of RNase S, particularly in the active site region. The root mean square discrepancy of all atoms from residues 1 to 16 and 24 to 123 is 1.06 A and the root mean square discrepancy for the active site region is 0.6 A.     

Crystallographic refinement and structure of DNase I at 2 A resolution

The structure of bovine pancreatic deoxyribonuclease I (DNase I) has been refined at 2 A resolution using the restrained parameter, reciprocal least-squares procedure of Hendrickson and Konnert. The conventional R-factor for 16,104 reflections with I greater than or equal to 3 sigma (I) from 6.0 to 2.0 A resolution is 0.157. Bond lengths and angles of the refined structure are close to ideal values with root-mean-square (r.m.s.) deviations of 0.023 A and 1.4 degrees, respectively. The r.m.s. deviation of short non-bonded contacts from the sum of van der Waals' radii is 0.18 A. The orientation of side-chains shows a clear trimodal distribution of chi 1-angles at -60 degrees, 180 degrees, 60 degrees (in the order of preference) corresponding to staggered conformations. The chemically determined sequence was corrected at four positions, the major correction being an insertion of the tripeptide Ile-Val-Arg between Arg27 and Arg28. Extended hydrophobic regions in between, and on either side of, the two central six-stranded beta-pleated sheets are mainly responsible for the low average isotropic temperature factor of 11.9 A2 for the 2033 protein atoms. Besides the flexible loop region between Gly97 and Gly102 (Glu99 and Ser100 are disordered) and the carbohydrate side-chain, which both extend into a large solvent channel, only the exposed loop Arg70 to Lys74 shows elevated thermal mobility. The longest of the eight helices in DNase I, together representing 26% of the structure, has a 22 degree kink and consists of two alpha-helical segments (residues 136 to 144 and 145 to 155) separated by a 3(10)-helical turn. DNase I fragments 1 to 120 and 121 to 257 can be superimposed by an approximate 2-fold axis (r.m.s. deviation 1.49 A for 61 equivalent C alpha positions), suggesting that the enzyme might be the result of gene duplication. The two Ca2+ bound to DNase I under crystallization conditions are important for its structural integrity by stabilizing the surface loop Asp198 to Thr204 and limiting the region of high thermal mobility in the flexible loop to residues Gly97 to Gly102. The N-linked carbohydrate side-chain attached to Asn18 is of the high-mannose type with a branching point at the mannose residue in position 3.(ABSTRACT TRUNCATED AT 400 WORDS)     

Crystal structure of AlgQ2, a macromolecule (alginate)-binding protein of Sphingomonas sp. A1 at 2.0A resolution

Sphingomonas sp. A1 possesses a high molecular mass (average 25,700 Da) alginate uptake system mediated by a novel pit-dependent ABC transporter. The X-ray crystallographic structure of AlgQ2 (57,200 Da), an alginate-binding protein in the system, was determined by the multiple isomorphous replacement method and refined at 2.0 A resolution with a final R-factor of 18.3% for 15 to 2.0 A resolution data. The refined structure of AlgQ2 was comprised of 492 amino acid residues, 172 water molecules, and one calcium ion. AlgQ2 was composed of two globular domains with a deep cleft between them, which is expected to be the alginate-binding site. The overall structure is basically similar to that of maltose/maltodextrin-binding protein, except for the presence of an N2-subdomain. The entire calcium ion-binding site is similar to the site in the EF-hand motif, but comprises a ten residue loop. This calcium ion-binding site is about 40 A away from the alginate-binding site.     

Refined crystal structure of troponin C from turkey skeletal muscle at 2.0 A resolution

The crystal structure of troponin C from turkey skeletal muscle has been refined at 2.0 A resolution (1 A = 0.1 nm). The resulting crystallographic R factor (R = sigma[[Fo[-[Fc[[/sigma[Fo[, where [Fo[ and [Fc[ are the observed and calculated structure factor amplitudes) is 0.155 for the 8054 reflections with intensities I greater than or equal to 2 sigma(I) within the 10 A to 2.0 A resolution range. With 66% of the residues in helical conformation, troponin C provides a good sample for helix analysis. The mean alpha-helix dihedral angles (phi, psi = -62 degrees, -42 degrees) agree with values observed for helical regions in other proteins. The helices are all curved and/or kinked. In particular, the 31 amino acid long inter-domain helix is smoothly curved, with a rather large radius of curvature of 137 A. Helix packing is different in the Ca2+-free domain (N-terminal) and the Ca2+-bound domain (C-terminal). The inter-helix angles for the two helix-loop-helix motifs in the regulatory domain are 133 degrees and 151 degrees, whereas the value for the two motifs in the C-terminal domain is 110 degrees, as observed in the EF-hands of parvalbumin. These differences affect the packing of the respective hydrophobic cores of each domain, in particular the disposition of aromatic rings. Pairwise arrangement of Ca2+-binding loops is common to both states, but the conformation is markedly different. Conversion of one to the other can be achieved by small cumulative changes of main-chain dihedral angles. The integrity of loop structure is maintained by numerous electrostatic interactions. Both salt bridges and carboxyl-carboxylate interactions are observed in TnC. There are more intramolecular (9) than intermolecular (1) salt bridges. Carboxyl-carboxylate interactions occur because the pH of the crystals is 5.0 and there is a multitude of aspartate and glutamate residues. One is intramolecular and four are intermolecular. Polar side-chain interactions occur more commonly with main-chain carbonyls and amides than with other polar side-chains. These interactions are mostly short range, and are similar to those observed in other proteins with one exception: negatively charged side-chains interact more frequently with main-chain carbonyl oxygen atoms. However, out of 19 such interactions, 10 involve oxygen atoms of the Ca2+ ligands. These unfavorable interactions are compensated by the favorable interactions with the Ca2+ ions and with main-chain amides. They are a trivial consequence of the tight fold of the Ca2+-binding loops.