Cross-linked enzyme aggregates (CLEAs) with controlled particles: Application to Candida rugosa lipase

Aggregation agent type and concentration, lipase and glutaraldehyde concentration, and pH are able to affect the formation of cross-linked lipase. The carrier-free immobilized Candida rugosa lipase with a particle size of 40–50 μm showed higher activity than that of the lipase with other particle sizes. The carrier-free immobilized C. rugosa lipase can keep 86% original lipase activity (0.018 g g⁻¹ min⁻¹). The enantioselectivity of the carrier-free immobilized lipase (23.3) was about 1.8 times as much as that of the native lipase (13.0) in kinetic resolution of ibuprofen racemic mixture.     

Molecular modeling of substrate selectivity of Candida antarctica lipase B and Candida rugosa lipase towards c9, t11- and t10, c12-conjugated linoleic acid

Molecular modeling was used to clarify the mechanism of the selectivity of Candida antarctica lipase B and Candida rugosa lipase towards cis9, trans11 (c9, t11-) and trans10, cis12 (t10, c12-) conjugated linoleic acid. Hydrogen bonds network, substrate conformation, binding affinity and water molecules in the binding site were analyzed. Substrate conformation and binding affinity were not correlated with the experimental results of the substrate selectivity. On the contrary, better enzyme preference towards a substrate was correlated with two stronger hydrogen bonds (His-NH-O_a and His-NH-Ser-O_γ) and less water molecules between the substrate the binding pocket. Possible explanation of these was discussed.     

Covalent immobilization of pure isoenzymes from lipase of Candida rugosa

Covalent immobilization of pure lipases A and B from Candida rugosa on agarose and silica is described. The immobilization increases the half-life of the biocatalysts ( ) with respect to the native pure lipases ( ). The percentage immobilization of lipases A and B is similar in both supports (33–40%). The remaining activity of the biocatalysts immobilized on agarose (70–75%) is greater than that of the enzymatic derivatives immobilized on SiO₂ (40–50%). The surface area and the hydrophobic/hydrophilic properties of the support control the lipase activity of these derivatives. The thermal stability of the immobilized lipase A derivatives is greater than that of lipase B derivatives. The nature of the support influences the thermal deactivation profile of the immobilized derivatives. The immobilization in agarose (hydrophilic support) gives biocatalysts that show a greater initial specific reaction rate than the biocatalysts immobilized in SiO₂ (hydrophobic support) using the hydrolysis of the esters of (R) or (S) 2-chloropropanoic and of (R,S) 2-phenylpropanoic acids as the reaction test. The enzymatic derivatives are active for at least 196 h under hydrolysis conditions. The stereospecificity of the native and the immobilized enzymes is the same.     

Unexpected reaction profile observed in the synthesis of propyl laurate when using Candida rugosa lipases immobilized in microemulsions based organogels

1-Propyl laurate synthesis should not be used as standard reaction test of immobilized enzymes in microemulsion-based organogels (MBGs) prepared using lecithin/1-propanol as surfactant when extremely active enzymes with high load are used. In these cases, an anomalous kinetic reaction constant value is observed over short reaction times. Such an anomalous profile is strongly dependent on the concentration of catalyst in the crude powder and, consequently, is not appreciated when either commercial or low activity lipase samples are employed.     

Novel chitosan membranes as support for lipases immobilization: Characterization aspects

Membranes of chitosan (QS), chitosan treated with glutaraldehyde (QGA) and chitosan crown ether (QCE) were utilized as carriers for immobilization of Candida antarctica and Candida rugosa lipases. Membrane supports were characterized by several techniques (Raman spectroscopy, elemental analysis by CHN determination and Energy Dispersive X-ray (EDX), water sorption isotherms, and surface area from nitrogen sorption data). To verify the presence of enzymes, some of these techniques were also used for lipase on chitosan biocatalytic systems. Measurements of protein load from Biuret assays and catalytic activity in esterification in nonaqueous media were also made for the immobilized enzymes. Sorption isotherms at 20, 30, 40 and 50 °C for QS, QGA and QCE supports were fitted to the Guggenheim, Anderson and Böer model. GAB monolayer moisture parameter, Xm, varied between 0.029 and 0.051 for QS, 0.039 and 0.058 for QGA and 0.039–0.075 g of water g⁻¹ s.s. for QCE membranes. Elemental analysis and Raman spectra measurements of the lipase, supports and immobilized lipase systems gave evidence of the presence of enzymes on supports. Chitosan supports with internal surface area (m2 g⁻¹) among 3.31 and 1.26 were obtained. Regardless of these low values, acceptable protein load (0.61 to 3.21%) and esterification initial rates were achieved (0.88–2.75 mmol min⁻¹ g of protein⁻¹).     

Immobilization of lipase from Candida rugosa on Eupergit C supports by covalent attachment

The present study compares the results of three different covalent immobilization methods employed for immobilization of lipase from Candida rugosa on Eupergit^® C supports with respect to enzyme loadings, activities and coupling yields. It seems that method yielding the highest activity retention of 43.3% is based on coupling lipase via its carbohydrate moiety previously modified by periodate oxidation. Study of thermal deactivation kinetics at three temperatures (37, 50 and 75 °C) revealed that the immobilization method also produces an appreciable stabilization of the biocatalyst, changing its thermal deactivation profile. By comparison of the t_1/2 values obtained at 75 °C, it can be concluded that the lipase immobilized via carbohydrate moiety was almost 2-fold more stable than conventionally immobilized one and 18-fold than free lipase. The immobilization procedure developed is quite simple, and easily reproduced, and provides a promising solution for application of lipase in aqueous and microaqueous reaction system.     

Inhibition of Candida rugosa lipase by saponins, flavonoids and alkaloids

Lipase inhibitors have generated a great interest because they could help in the prevention or the therapy of lipase-related diseases. Therefore, the aim of the work was to evaluate by HPLC, and using Candida rugosa lipase as model, the inhibitory effect of several saponins: β-aescin, digitonin, glycyrrhizic acid (GA) and Quillaja saponin (QS); flavonoids: 3-hydroxyflavone, 5-hydroxyflavone, (±)-catechin and kaempferol; and alkaloids: aspidospermine, papaverine, physostigmine, pilocarpine, raubasine, rescinnamine, reserpine and trigonelline.

The inhibition produced by most of these compounds is described here for the first time. Saponins appeared very active, being β-aescin and digitonin the most active compounds (IC₅₀ = 0.8–2.4 × 10⁻⁵ M). The inhibitory activity of flavonoids was lower than that of saponins (except GA), and (±)-catechin and kaempferol were the most active. Alkaloids was the most heterogeneous group assayed, varying from rescinnamine, with an IC₁₆ similar to that of digitonin, to papaverine and others which showed almost no inhibition.

In conclusion, β-aescin, digitonin, kaempferol or (±)-catechin, strong lipase inhibitors with a low toxicity and present herbal drugs used for lipase-related diseases such as acne or ulcer, are promising candidates for the prevention or the treatment of these diseases.     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.     

Immobilization of Candida rugosa lipase on sporopollenin from Lycopodium clavatum

Sporopollenin is a natural polymer obtained from Lycopodium clavatum, which is highly stable with constant chemical structure and has high resistant capacity to chemical attack. In this study, immobilization of lipase from Candida rugosa (CRL) on sporopollenin by adsorption method is reported for the first time. Besides this, the enzyme adsorption capacity, activity and thermal stability of immobilized enzyme have also been investigated. It has been observed that under the optimum conditions (Spo-E_(0.3)), the specific activity of the immobilized lipase on the sporopollenin by adsorption was 16.3 U/mg protein, which is 0.46 times less than that of the free lipase (35.6 U/mg protein). The pH and temperature of immobilized enzyme were optimized, which were 6.0 and 40 °C respectively. Kinetic parameters V_max and K_m were also determined for the immobilized lipase. It was observed that there is an increase of the K_m value (7.54 mM) and a decrease of the V_max value (145.0 U/mg-protein) comparing with that of the free lipase.     

Salt-induced osmotic stress for glutathione overproduction in Candida utilis

The effect of NaCl-induced osmotic stress on glutathione (GSH) production was investigated in Candida utilis. Based on the fact that NaCl stress can enhance GSH production but inhibit cells growth simultaneously, the novel strategies of multiple osmotic stresses with different NaCl additions (0.2 mol/l at 4 h, 0.4 mol/l at 8 h, and 0.6 mol/l at 12 and 16 h) were developed for GSH overproduction. After 30 h cultivation, GSH yield reached 238 mg/l and intracellular GSH content was 2.34%, increased by 66.4% and 70.7% respectively compared to the control. Further applying the strategies to 7 l fermentor, GSH yield of 356 mg/l was achieved at 30 h, which was 65.6% higher than the control. Moreover, NaCl stress led to an increase in intracellular cysteine content and activities of γ-glutamylcysteine synthetase, GSH synthetase and GSH reductase, explaining the mechanism involved in inducing cellular GSH accumulation.     

Influence of the organic solvents on the activity in water and the conformation of Candida rugosa lipase: Description of a lipase-activating pretreatment

The influence on lipase activity in water of a pretreatment on Candida rugosa lipase using water miscible and immiscible solvents was studied. The lipase activity in the hydrolysis of esteric substrates in aqueous media increases when the lipase was previously treated with various nearly anhydrous organic media. This activation, which was irreversible, was higher for longer pretreatment times. It was dependent on the pretreatment medium (water activity and solvent used). A relation between variations in the emission intensity and the activities of treated and untreated lipases was found. Activating pretreatment did not shift the peak of fluorescence emission but gave rise to variations in the secondary protein structure by increasing the helical nature. A similar increment in the hydrolysis rate in water can be obtained with the addition of an appropriate amount of solvent (acetonitrile or n-heptane) to the aqueous reaction medium.     

Purification and characterization of two isoforms from Candida rugosa lipase B

Two isoforms of Candida rugosalipase B (LB1 and LB2) were purified by anionic exchange chromatography. The lipases had the same N-terminal sequence, carbohydrate content and pH and thermal stability but different pIs and significant differences in their activities against different p-nitrophenol esters and triacylglycerides.     

Multipoint covalent immobilization of microbial lipase on chitosan and agarose activated by different methods

In this work Candida antarctica lipase type B (CALB) was immobilized on agarose and chitosan. The influence of activation agents (glycidol, glutaraldehyde and epichlorohydrin) and immobilization time (5, 24 and 72 h) on hydrolytic activity, thermal and alkaline stabilities of the biocatalyst was evaluated. Protein concentration and enzymatic activity in the supernatant were determined during the immobilization process. More active derivatives were attained when the enzymatic extract was first purified through dialysis. The highest activities achieved were: for agarose-glyoxyl (with glycidol), 845 U/g of gel, after 72 h of immobilization; for chitosan-glutaraldehyde and agarose-glutaraldehyde, respectively, 1209 U/g of gel and 2716 U/g of gel, after 5 h of immobilization. Thermal stability was significantly increased, when compared to the soluble enzyme: 20-fold for agarose-glyoxyl (with glycidol)-CALB, 18-fold for chitosan-glutaraldehyde-CALB and 21-fold for agarose-glutaraldehyde. The best derivative, 58-fold more stable than the soluble enzyme, was obtained when CALB was immobilized on chitosan activated in two steps, using glycidol and glutaraldehyde, 72 h immobilization time. The stabilization degree of the derivative increased with the immobilization time, an indication that a multipoint covalent attachment between enzyme and the support had really occurred.     

Efficient, galactose-free production of Candida antarctica lipase B by GAL10 promoter in Δgal80 mutant of Saccharomyces cerevisiae

An efficient yeast gene expression system with GAL10 promoter that does not require galactose as an inducer was developed using Δgal80 mutant strain of Saccharomyces cerevisiae. We constructed several combinations of gal mutations (Δgal1, Δgal80, Δmig1, Δmig2, and Δgal6) of S. cerevisiae and tested for their effect on efficiency of recombinant protein production by GAL10 promoter using a lipase, Candida antarctica lipase B (CalB), as a reporter. While the use of Δgal1 mutant strain required the addition of a certain amount of galactose to the medium, Δgal80 mutant strain did not require galactose. Furthermore, it was found that the recombinant CalB could be produced more efficiently (1.6-fold at 5 L-scale fermentation) in Δgal80 mutant strain than in the Δgal1 mutant. The Δgal80 mutant strain showed glucose repressible mode of expression of GAL10 promoter. Using Δgal80 mutant strain of S. cerevisiae, CalB was efficiently produced in a glucose-only fermentation at volumes up to 500 L.     

Recombinant Candida rugosa LIP2 expression in Pichia pastoris under the control of the AOX1 promoter

The LIP2 isoenzyme gene from Candida rugosa has been completely synthesised and functionally expressed under the AOX1 promoter control in Pichia pastoris. The on-line monitoring and control of methanol, the key inducer carbon source in fed-batch cultures, has enhanced the yield product/biomass 7.8-fold and the productivity 12.8-fold compared to the best batch cultivation with the Pichia system and, 10-fold compared to the fed-batch cultivation process using the native C. rugosa strain.Nevertheless, the high ionic strength of culture broth favoured aggregation of Lip2, leading to total loss of lipolytic activity. After cultivation, a diaultrafiltration process was implemented to diminish ionic strength, allowing for the recovery of lipolytic activity in the diaultrafiltrate. The developed bioprocess resulted into a reproducible product in terms of quality and productivity.     

Enhanced activity and enantioselectivity of Candida rugosa lipase immobilized on macroporous adsorptive resins for ibuprofen resolution

The lipase from Candida rugosa was immobilized on three commercially available macroporous adsorptive resins for kinetic resolution of ibuprofen. One resin, CRB02, increased the enzyme activity by 50% to 0.027 g g(-1) min(-1). The deactivation constant (0.19 h(-1)) of the immobilized enzyme was half of that of the native enzyme and the enantioselectivity (E = 29.2) of the immobilized lipase was 2.2 times as much as that of the native lipase for the kinetic resolution of ibuprofen with 1-propanol in isooctane at 30 degrees C.     

Immobilization of Candida rugosa lipase on glass beads for enantioselective hydrolysis of racemic Naproxen methyl ester

Candida rugosa lipase (CRL) was immobilized on glutaraldehyde-activated aminopropyl glass beads by using covalent binding method or sol-gel encapsulation procedure and improved considerably by fluoride-catalyzed hydrolysis of mixtures of RSi(OCH₃)₃ and Si(OCH₃)₄. The catalytic properties of the immobilized lipases were evaluated into model reactions, i.e. the hydrolysis of p-nitrophenylpalmitate (p-NPP). It has been observed that the percent activity yield of the encapsulated lipase was 166.9, which is 5.5 times higher than that of the covalently immobilized lipase. The enantioselective hydrolysis of racemic Naproxen methyl ester by immobilized lipase was studied in aqueous buffer solution/isooctane reaction system and it was noticed that particularly, the glass beads based encapsulated lipases had higher conversion and enantioselectivity compared to covalently immobilized lipase. In short, the study confirms an excellent enantioselectivity (E > 400) for the encapsulated lipase with an ee value of 98% for S-Naproxen.     

野生玫瑰种群表型变异

在野生玫瑰(Rosa rugosa)自然分布区内选取5个代表种群,选择24个表型性状作为研究对象,运用方差分析、多重比较、主成分分析、相关分析、聚类分析等方法,得出野生玫瑰种群表型变异程度和变异规律。结果显示:(1)24个表型性状在种群间和种群内均存在极显著差异,变异非常丰富;种群内变异(0.2718)大于种群间变异(0.1679),种群内变异是表型变异的主要来源,种群间平均表型分化系数(VST)为0.2952,分化水平相对较大;表型性状平均变异系数(CV)为18.48%(6.67—26.79%),叶片、果实、花、种子的变异系数依次为21.40%、17.42%、12.54%、6.67%;主成分分析表明叶片、果实的表型变异对种群变异起主要的贡献作用。(2)托叶长与年平均气温、7月平均气温呈显著正相关,与经、纬度呈显著负相关;果实横径与年降水量呈显著正相关;千粒重与经、纬度呈显著正相关,与7月平均气温呈显著负相关。(3)利用欧氏距离进行系统聚类分析,可以将5个种群划分为3类,表型性状主要依地理位置聚类。     

Candida antarctica lipase B catalysed amidation of pyroglutamic acid derivatives. A reaction survey

Pyroglutamic acid esters, both (S)- and (R)-enantiomers, have been studied as substrates of the Candida antarctica lipase B catalyzed amidation in anhydrous organic solvents. They behaved as very good substrates when primary amines or ammonia were used as nucleophiles, affording the corresponding secondary and primary amides, respectively, but did not react with secondary amines. The reaction was enantioselective for the (R)-enantiomer of chiral amines although little kinetic difference was observed between (S)- and (R)-pyroglutamates as acyl donors. As an example of an infrequent reaction, free (S)-pyroglutamic acid may also act as a substrate of the reaction, but is much less reactive than its esters.     

Esterification of streptol — a cyclitol derivative — by Candida rugosa lipase: influence of the acyl donor on regioselectivity

The influence of the nature of acyl donors on the regioselectivity of Candida rugosa lipase for the esterification of streptol — a cyclitol derivative — was investigated. Excellent regioselectivity for the formation of 3,7-disubstituted derivatives was observed for vinyl butyrate (100% 3,7-derivative, 68% yield) and vinyl propionate (100% 3,7-derivative, 46% yield) as acyl donors. In contrast, for vinyl methacrylate as acyl donor, a mixture of 71% 3,7-derivative and 29% 1,7-derivative was obtained. Varying the chain length, a certain dependency of regioselectivity on the acyl donor was observed, however, no logical correlation satisfying all cases was found. Mono-substituted streptol derivatives were obtained by employing Novozym 243.