Crystal structure of a four-copper laccase complexed with an arylamine: insights into substrate recognition and correlation with kinetics

Laccases are multicopper oxidases that catalyze the oxidation of a wide range of phenols or arylamines, and their use in industrial oxidative processes is increasing. We purified from the white rot fungus Trametes versicolor a laccase that exists as five different isozymes, depending on glycosylation. The 2.4 A resolution structure of the most abundant isozyme of the glycosylated enzyme was solved. The four copper atoms are present, and it is the first crystal structure of a laccase in its active form. The crystallized enzyme binds 2,5-xylidine, which was used as a laccase inducer in the fungus culture. This arylamine is a very weak reducing substrate of the enzyme. The cavity enclosing 2,5-xylidine is rather wide, allowing the accommodation of substrates of various sizes. Several amino acid residues make hydrophobic interactions with the aromatic ring of the ligand. In addition, two charged or polar residues interact with its amino group. The first one is an histidine that also coordinates the copper that functions as the primary electron acceptor. The second is an aspartate conserved among fungal laccases. The purified enzyme can oxidize various hydroxylated compounds of the phenylurea family of herbicides that we synthesized. These phenolic substrates have better affinities at pH 5 than at pH 3, which could be related to the 2,5-xylidine binding by the aspartate. This is the first high-resolution structure of a multicopper oxidase complexed to a reducing substrate. It provides a model for engineering laccases that are either more efficient or with a wider substrate specificity.     

Targeted mutations in a Trametes villosa laccase. Axial perturbations of the T1 copper

Trametes villosa laccase was mutated on a tetrapeptide segment near the type 1 site. The mutations F463M and F463L were at the position corresponding to the type 1 copper axial methionine (M517) ligand in Zucchini ascorbate oxidase. The mutations E460S and A461E were near the T1 copper site. The mutated Trametes laccases were expressed in an Aspergillus oryzae host and characterized. The E460S mutation failed to produce a transformant with meaningful expression. The F463L and A461E mutations did not significantly alter the molecular and enzymological properties of the laccase. In contrast, the F463M mutation resulted in a type 1 copper site with an EPR signal intermediate between that of the wild type laccase and plastocyanin, an altered UV-visible spectrum, and a decreased redox potential (by 0.1 V). In oxidizing phenolic substrate, the mutation led to a more basic optimal pH as well as an increase in kcat and Km. These effects are attributed to a significant perturbation of the T1 copper center caused by the coordination of the axial methionine (M463) ligand.     

Transformation of 2,4,6-trichlorophenol by free and immobilized fungal laccase

Laccase from the white rot fungus Coriolus versicolor was immobilized on Celite R-637 by covalent binding with glutaraldehyde. After a sharp primary decline in activity (up to 50%), the retained enzyme activity was stable over a storage period of 33 days at 4 degrees C. A comparative study of soluble and immobilized laccases revealed the increased resistance of immobilized enzyme to the unfavourable effects of alkaline pH, high temperature and the action of inhibitors. A combination of these properties of immobilized laccase resulted in the ability to oxidize 2,4,6-trichlorophenol (2,4,6-TCP) at 50 degrees C at pH 7.0. The reactions of soluble and immobilized laccase with 2,4,6-TCP were examined in the presence and absence of redox mediators. 3,5-Dichlorocatechol, 2,6-dichloro-1,4-benzoquinone and 2,6-dichloro-1,4-hydroquinone were found to be the primary products of 2,4,6-TCP oxidation by laccase; oligo- and polymeric compounds were also found.     

Oxidation of Anthracene and Benzo[a]pyrene by Laccases from Trametes versicolor

The in vitro oxidation of the two polycyclic aromatic hydrocarbons anthracene and benzo[a]pyrene, which have ionization potentials of <=7.45 eV, is catalyzed by laccases from Trametes versicolor. Crude laccase preparations were able to oxidize both anthracene and the potent carcinogen benzo[a]pyrene. Oxidation of benzo[a]pyrene was enhanced by the addition of the cooxidant 2,2(prm1)-azinobis(3-ethylbenzthiazoline-6-sulfonate) (ABTS), while an increased anthracene oxidizing ability was observed in the presence of the low-molecular-weight culture fluid ultrafiltrate. Two purified laccase isozymes from T. versicolor were found to have similar oxidative activities towards anthracene and benzo[a]pyrene. Oxidation of anthracene by the purified isozymes was enhanced in the presence of ABTS, while ABTS was essential for the oxidation of benzo[a]pyrene. In all cases anthraquinone was identified as the major end product of anthracene oxidation. These findings indicate that laccases may have a role in the oxidation of polycyclic aromatic hydrocarbons by white rot fungi.     

Comparison of fungal laccases and redox mediators in oxidation of a nonphenolic lignin model compound.

Several fungal laccases have been compared for the oxidation of a nonphenolic lignin dimer, 1-(3, 4-dimethoxyphenyl)-2-(2-methoxyphenoxy)propan-1,3-diol (I), and a phenolic lignin model compound, phenol red, in the presence of the redox mediators 1-hydroxybenzotriazole (1-HBT) or violuric acid. The oxidation rates of dimer I by the laccases were in the following order: Trametes villosa laccase (TvL) > Pycnoporus cinnabarinus laccase (PcL) > Botrytis cinerea laccase (BcL) > Myceliophthora thermophila laccase (MtL) in the presence of either 1-HBT or violuric acid. The order is the same if the laccases are used at the same molar concentration or added to the same activity (with ABTS [2, 2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)] as a substrate). During the oxidation of dimer I, both 1-HBT and violuric acid were to some extent consumed. Their consumption rates also follow the above order of laccases, i.e., TvL > PcL > BcL > MtL. Violuric acid allowed TvL and PcL to oxidize dimer I much faster than 1-HBT, while BcL and violuric acid oxidized dimer I more slowly than BcL and 1-HBT. The oxidation rate of dimer I is dependent upon both kcat and the stability of the laccase. Both 1-HBT and violuric acid inactivated the laccases, violuric acid to a greater extent than 1-HBT. The presence of dimer I or phenol red in the reaction mixture slowed down this inactivation. The inactivation is mainly due to the reaction of the redox mediator free radical with the laccases. We did not find any relationship between the carbohydrate content of the laccases and their inactivation. When the redox potential of the laccases is in the range of 750 to 800 mV, i.e., above that of the redox mediator, it does not affect kcat and the oxidation rate of dimer I.     

A crystallographic and spectroscopic study on the effect of X-ray radiation on the crystal structure of Melanocarpus albomyces laccase

Laccases (p-diphenol dioxygen oxidoreductases) belong to the family of blue multicopper oxidases, which catalyse the four-electron reduction of dioxygen to water concomitantly through the oxidation of substrate molecules. Blue multicopper oxidases have four coppers, a copper (T1) forming a mononuclear site and a cluster of three coppers (T2, T3, and T3') forming a trinuclear site. Because X-rays are known to liberate electrons during data collection and may thus affect the oxidation state of metals, we have investigated the effect of X-ray radiation upon the crystal structure of a recombinant laccase from Melanocarpus albomyces through the use of crystallography and crystal absorption spectroscopy. Two data sets with different strategies, a low and a high-dose data set, were collected at synchrotron. We have observed earlier that the trinuclear site had an elongated electron density amidst coppers, suggesting dioxygen binding. The low-dose synchrotron structure showed similar elongated electron density, but the high-dose X-ray radiation removed the bulk of this density. Therefore, X-ray radiation could alter the active site of laccase from M. albomyces. Absorption spectra of the crystals (320, 420, and 590nm) during X-ray radiation were measured at a home laboratory. Spectra clearly showed how that the band at 590nm had vanished, resulting from the T1 copper being reduced, during the long X-ray measurements. The crystal colour changed from blue to colourless. Absorptions at 320 and 420nm seemed to be rather permanent. The absorption at 320nm is due to the T3 coppers and it is proposed that absorption at 420nm is due to the T2 copper when dioxygen or a reaction intermediate is close to this copper.     

A study of a series of recombinant fungal laccases and bilirubin oxidase that exhibit significant differences in redox potential,substrate specificity,and stability

A series of fungal laccases (Polyporus pinsitus, Rhizoctonia solani, Myceliophthora hermophila, Scytalidium thermophilum) and one bilirubin oxidase (Myrothecium verrucaria) have been studied to determine their redox potential, specificity, and stability. Polyporus and Rhizoctonia laccases possess potentials near 0.7–0.8 V (vs. NHE), while other oxidases have potentials near 0.5 V. It is observed that higher redox potential correlates with higher activity. By EPR, no significant change in the geometry of type 1 copper (II) site is observed over this series. At the optimal pH, the two substrates studied, 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulfonic acid) and syringaldazine, show K_m values ranging from 10 to 120 and from 1 to 45 μM; and k_cat values ranging from 50 to 16000 and 200 to 3000 per min, respectively. The enzymes are more stable in the neutral-alkaline pH range. The thermal stability is in the order of bilirubin oxidase ≈ Myceliophthora laccase ≈ Scytalidium laccase > Polyporus laccase > Rhizoctonia laccase. Based on these results and the sequence alignments made against Zucchini ascorbate oxidase it is speculated that structural differences in the substrate-activation site (a ‘blue’, type 1 copper center) control the redox potential range as well as substrate specificity, and the cystine content contributes to stability.     

The structure of Rigidoporus lignosus Laccase containing a full complement of copper ions, reveals an asymmetrical arrangement for the T3 copper pair

Laccase is a multicopper blue oxidase that couples the four-electron reduction of oxygen with the oxidation of a broad range of organic substrates, including phenols and arylamines. The enzyme is the object of intense biotechnological research, due to its employment in bioremediation of soils and water as well as in other biotechnological applications. We report here the cDNA and protein sequences, the post-translational modifications, the crystallization and X-ray structure determination of a laccase from the white-rot fungus Rigidoporus lignosus. The amino acid residues sequence deduced from cDNA clearly identified a pre-sequence of 21 residues representing the signal for extra-cellular localization. Mass spectrometry analysis performed on the salvage enzyme, confirmed the deduced sequence and precisely mapped two glycosylation sites at Asn337 and Asn435, determining the nature of the bound glycosidic moieties. The crystal structure was determined at 1.7A resolution from perfectly hemihedrally twinned crystals, by molecular replacement technique. While the overall structure closely resembled those reported for other fungal laccases, the analysis of the T2/T3 trinuclear cluster revealed an unprecedented coordination sphere for the T3 copper pair. No bridging oxygen ligand was present between the two T3 copper ions, which were no longer symmetrically coordinated. The observed structure could represent an intermediate along the process of four-electron reduction of oxygen to water taking place at the trinuclear copper cluster.     

Characterization of cucumber ascorbate oxidase and its reaction with hexacyanoferrate (II)

The spectroscopic features of cucumber ascorbate oxidase (AOase) and its type-2 copper-depleted (T2D) derivative, and the electron pathway among the copper sites in the enzyme have been investigated. The electronic and CD spectra of native and T2D AOase in the visible region bear a striking resemblance to those of plastocyanin or azurin, which contain type-1 copper alone. The electronic absorption shoulder of the native enzyme at around 330 nm for the native enzyme which has been assigned to type-3 copper disappears with the depletion of the type-2 copper. The reduction of AOase with a large excess of hexacyanoferrate(II) results in a selective reduction of the type-2 Cu, giving rise to an additional EPR-detectable species which is considered to be originated from partly reduced type-3 copper. The type-1 copper is, however, not reduced even in the presence of excess hexacyanoferrate(II). The redox potential of type-1 Cu was determined to be +350 mV, which is distinctly lower than that of hexacyanoferrate(II-III). Type-2 copper was supposed to be a mediator of the electron transfer between type-1 and type-3 coppers in consideration of the extremely low activity of the T2D enzyme under the same condition. A comparison of the electron pathway in AOase with that in laccase is also argued.     

Oxidation of polycyclic aromatic hydrocarbons by the bacterial laccase CueO from E. coli

Laccases produced by white rot fungi are capable of rapidly oxidizing benzo[a]pyrene. We hypothesize that the polycyclic aromatic hydrocarbon (PAH)-degrading bacteria producing laccase can enhance the degree of benzo[a]pyrene mineralization. However, fungal laccases are glycoproteins which cannot be glycosylated in bacteria, and there is no evidence to show that bacterial laccases can oxidize benzo[a]pyrene. In this study, the in vitro oxidation of PAHs by crude preparations of the bacterial laccase, CueO, from Escherichia coli was investigated. The results revealed that the crude CueO catalyzed the oxidation of anthracene and benzo[a]pyrene in the same way as the fungal laccase from Trametes versicolor, but showed specific characteristics such as thermostability and copper dependence. In the presence of 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid), high amounts of anthracene and benzo[a]pyrene, 80% and 97%, respectively, were transformed under optimal conditions of 60°C, pH 5, and 5 mmol l(-1) CuCl(2) after a 24-h incubation period. Other PAHs including fluorene, acenaphthylene, phenanthrene, and benzo[a]anthracene were also oxidized by the crude CueO. These findings indicated the potential application of prokaryotic laccases in enhancing the mineralization of benzo[a]pyrene by PAH-degrading bacteria.     

Redox chemistry in laccase-catalyzed oxidation of N-hydroxy compounds

1-Hydroxybenzotriazole, violuric acid, and N-hydroxyacetanilide are three N-OH compounds capable of mediating a range of laccase-catalyzed biotransformations, such as paper pulp delignification and degradation of polycyclic hydrocarbons. The mechanism of their enzymatic oxidation was studied with seven fungal laccases. The oxidation had a bell-shaped pH-activity profile with an optimal pH ranging from 4 to 7. The oxidation rate was found to be dependent on the redox potential difference between the N-OH substrate and laccase. A laccase with a higher redox potential or an N-OH compound with a lower redox potential tended to have a higher oxidation rate. Similar to the enzymatic oxidation of phenols, phenoxazines, phenothiazines, and other redox-active compounds, an "outer-sphere" type of single-electron transfer from the substrate to laccase and proton release are speculated to be involved in the rate-limiting step for N-OH oxidation.     

Reactivities of Various Mediators and Laccases with Kraft Pulp and Lignin Model Compounds

Laccase-catalyzed oxygen delignification of kraft pulp offers some potential as a replacement for conventional chemical bleaching and has the advantage of requiring much lower pressure and temperature. However, chemical mediators are required for effective delignification by laccase, and their price is currently too high at the dosages required. To date, most studies have employed laccase from Trametes versicolor. We have found significant differences in reactivity between laccases from different fungi when they are tested for pulp delignification in the presence of the mediators 2,2(prm1)-azinobis(3-ethylbenzthiazoline-6-sulfonate) (ABTS) and 1-hydroxybenzotriazole (HBT). A more detailed study of T. versicolor laccase with ABTS and HBT showed that HBT gave the most extensive delignification over 2 h but deactivated the enzyme, and therefore a higher enzyme dosage was required. Other mediators, including 1-nitroso-2-naphthol-3,6-disulfonic acid, 4-hydroxy-3-nitroso-1-naphthalenesulfonic acid, promazine, chlorpromazine, and Remazol brilliant blue, were also tested for their ability to delignify kraft pulp. Studies with dimeric model compounds indicated that the mechanisms of oxidation by ABTS and HBT are different. In addition, oxygen uptake by laccase is much slower with HBT than with ABTS. It is proposed that the dication of ABTS and the 1-oxide radical of HBT, with redox potentials in the 0.8- to 0.9-V range, are required for pulp delignification.     

Structure,functionality and tuning up of laccases for lignocellulose and other industrial applications

Laccases (EC 1.10.3.2) are copper-containing oxidoreductases that have a relatively high redox potential which enables them to catalyze oxidation of phenolic compounds, including lignin-derived phenolics. The laccase-catalyzed oxidation of phenolics is accompanied by concomitant reduction of dioxygen to water via copper catalysis and involves a series of electron transfer reactions balanced by a stepwise re-oxidation of copper ions in the active site of the enzyme. The reaction details of the catalytic four-copper mechanism of laccase-mediated catalysis are carefully re-examined and clarified. The substrate range for laccase catalysis can be expanded by means of supplementary mediators that essentially function as vehicles for electron transfer. Comparisons of amino acid sequences and structural traits of selected laccases reveal conservation of the active site trinuclear center geometry but differences in loop conformations. We also evaluate the features and regions of laccases in relation to modification and evolution of laccases for various industrial applications including lignocellulosic biomass processing.     

Pushing the limits of automatic computational protein design: design, expression, and characterization of a large synthetic protein based on a fungal laccase scaffold

The de novo engineering of new proteins will allow the design of complex systems in synthetic biology. But the design of large proteins is very challenging due to the large combinatorial sequence space to be explored and the lack of a suitable selection system to guide the evolution and optimization. One way to approach this challenge is to use computational design methods based on the current crystallographic data and on molecular mechanics. We have used a laccase protein fold as a scaffold to design a new protein sequence that would adopt a 3D conformation in solution similar to a wild-type protein, the Trametes versicolor (TvL) fungal laccase. Laccases are multi-copper oxidases that find utility in a variety of industrial applications. The laccases with highest activity and redox potential are generally secreted fungal glycoproteins. Prokaryotic laccases have been identified with some desirable features, but they often exhibit low redox potentials. The designed sequence (DLac) shares a 50% sequence identity to the original TvL protein. The new DLac gene was overexpressed in E. coli and the majority of the protein was found in inclusion bodies. Both soluble protein and refolded insoluble protein were purified, and their identity was verified by mass spectrometry. Neither protein exhibited the characteristic T1 copper absorbance, neither bound copper by atomic absorption, and neither was active using a variety of laccase substrates over a range of pH values. Circular dichroism spectroscopy studies suggest that the DLac protein adopts a molten globule structure that is similar to the denatured and refolded native fungal TvL protein, which is significantly different from the natively secreted fungal protein. Taken together, these results indicate that the computationally designed DLac expressed in E. coli is unable to utilize the same folding pathway that is used in the expression of the parent TvL protein or the prokaryotic laccases. This sequence can be used going forward to help elucidate the sequence requirements needed for prokaryotic multi-copper oxidase expression. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11693-011-9080-9) contains supplementary material, which is available to authorized users.     

Comparison of Fungal Laccases and Redox Mediators in Oxidation of a Nonphenolic Lignin Model Compound

Several fungal laccases have been compared for the oxidation of a nonphenolic lignin dimer, 1-(3,4-dimethoxyphenyl)-2-(2-methoxyphenoxy)propan-1,3-diol (I), and a phenolic lignin model compound, phenol red, in the presence of the redox mediators 1-hydroxybenzotriazole (1-HBT) or violuric acid. The oxidation rates of dimer I by the laccases were in the following order: Trametes villosa laccase (TvL) > Pycnoporus cinnabarinus laccase (PcL) > Botrytis cinerea laccase (BcL) > Myceliophthora thermophila laccase (MtL) in the presence of either 1-HBT or violuric acid. The order is the same if the laccases are used at the same molar concentration or added to the same activity (with ABTS [2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)] as a substrate). During the oxidation of dimer I, both 1-HBT and violuric acid were to some extent consumed. Their consumption rates also follow the above order of laccases, i.e., TvL > PcL > BcL > MtL. Violuric acid allowed TvL and PcL to oxidize dimer I much faster than 1-HBT, while BcL and violuric acid oxidized dimer I more slowly than BcL and 1-HBT. The oxidation rate of dimer I is dependent upon both k_cat and the stability of the laccase. Both 1-HBT and violuric acid inactivated the laccases, violuric acid to a greater extent than 1-HBT. The presence of dimer I or phenol red in the reaction mixture slowed down this inactivation. The inactivation is mainly due to the reaction of the redox mediator free radical with the laccases. We did not find any relationship between the carbohydrate content of the laccases and their inactivation. When the redox potential of the laccases is in the range of 750 to 800 mV, i.e., above that of the redox mediator, it does not affect k_cat and the oxidation rate of dimer I.     

Redox Chemistry in Laccase-Catalyzed Oxidation of N-Hydroxy Compounds

1-Hydroxybenzotriazole, violuric acid, and N-hydroxyacetanilide are three N-OH compounds capable of mediating a range of laccase-catalyzed biotransformations, such as paper pulp delignification and degradation of polycyclic hydrocarbons. The mechanism of their enzymatic oxidation was studied with seven fungal laccases. The oxidation had a bell-shaped pH-activity profile with an optimal pH ranging from 4 to 7. The oxidation rate was found to be dependent on the redox potential difference between the N-OH substrate and laccase. A laccase with a higher redox potential or an N-OH compound with a lower redox potential tended to have a higher oxidation rate. Similar to the enzymatic oxidation of phenols, phenoxazines, phenothiazines, and other redox-active compounds, an “outer-sphere” type of single-electron transfer from the substrate to laccase and proton release are speculated to be involved in the rate-limiting step for N-OH oxidation.     

Laccase induction in fungi and laccase/N-OH mediator systems applied in paper mill effluent

There has been increasing interest in extracellular enzymes from white rot fungi, such as lignin and manganese peroxidases, and laccases, due to their potential to degrade both highly toxic phenolic compounds and lignin. The optimum cultivation conditions for laccase production in semi-solid and liquid medium by Trametes versicolor, Trametes villosa, Lentinula edodes and Botrytis cinerea and the effects of laccase mediator system in E1 effluent were studied. The higher laccase activity (12756 U) was obtained in a liquid culture of T. versicolor in the presence of 1 mM of 2,5-xylidine and 0.4 mM copper salt as inducers. The effluent biotreatments were not efficient in decolorization with any fungal laccases studied. Maximum phenol reduction was approximately 23% in the absence of mediators from T. versicolor. The presence of 1-hydroxybenzotriazole did not increase phenol reduction. However, acetohydroxamic acid, which was not degraded by laccase, acted very efficiently on E1 effluent, reducing 70% and 73% of the total phenol and total organic carbon, respectively. Therefore, acetohydroxamic acid could be applied as a mediator for laccase bioremediation in E1 effluent.     

Crystal structure of a laccase from Melanocarpus albomyces with an intact trinuclear copper site

We have crystallized the ascomycete laccase from Melanocarpus albomyces with all four coppers present and determined the crystal structure at 2.4 A resolution. The enzyme is heavily glycosylated and consists of three cupredoxin-like domains, similar to those found in the Cu-depleted basidiomycete laccase from Coprinus cinereus. However, there are significant differences in the loops forming the substrate-binding pocket. In addition, the crystal structure of the M. albomyces laccase revealed elongated electron density between all three coppers in the trinuclear copper site, suggesting that an oxygen molecule binds with a novel geometry. This oxygen, required in the reaction, may enter the trinuclear site through the tunnel, which is open in the structure of the C. cinereus laccase. In contrast, the C-terminus on the M. albomyces laccase forms a plug that blocks this access.     

Compensatory binding of an asparagine residue to the coordination-unsaturated type I Cu center in bilirubin oxidase mutants

Met467, the axial ligand to type I Cu in a multicopper oxidase, Myrothecium verrucaria bilirubin oxidase was substituted with a non-coordinating Phe and Leu to transform the spectral and magnetic properties and oxidase activities of the enzyme into those of fungal laccases, but the mutated type I Cu center showed properties characteristic of phytocyanins, blue copper proteins with an axial coordination of Gln, due to compensatory binding of the distal Asn459 as evidenced by a double mutation.     

Switching from blue to yellow: altering the spectral properties of a high redox potential laccase by directed evolution

Abstract

During directed evolution to functionally express the high redox potential laccase from the PM1 basidiomycete in Saccharomyces cerevisiae, the characteristic maximum absorption at the T1 copper site (Abs₆₁₀T1Cu) was quenched, switching the typical blue colour of the enzyme to yellow. To determine the molecular basis of this colour change, we characterized the original wild-type laccase and its evolved mutant. Peptide printing and MALDI-TOF analysis confirmed the absence of contaminating protein traces that could mask the Abs₆₁₀T1Cu, while conservation of the redox potential at the T1 site was demonstrated by spectroelectrochemical redox titrations. Both wild-type and evolved laccases were capable of oxidizing a broad range of substrates (ABTS, guaiacol, DMP, synapic acid) and they displayed similar catalytic efficiencies. The laccase mutant could only oxidize high redox potential dyes (Poly R-478, Reactive Black 5, Azure B) in the presence of exogenous mediators, indicating that the yellow enzyme behaves like a blue laccase. The main consequence of over-expressing the mutant laccase was the generation of a six-residue N-terminal acidic extension, which was associated with the failure of the STE13 protease in the Golgi compartment giving rise to alternative processing. Removal of the N-terminal tail had a negative effect on laccase stability, secretion and its kinetics, although the truncated mutant remained yellow. The results of CD spectra analysis suggested that polyproline helixes were formed during the directed evolution altering spectral properties. Moreover, introducing the A461T and S426N mutations in the T1 environment during the first cycles of laboratory evolution appeared to mediate the alterations to Abs₆₁₀T1Cu by affecting its coordinating sphere. This laccase mutant is a valuable departure point for further protein engineering towards different fates.