Detection of Microbial Pathogens in Shellfish with Multiplex PCR

Multiplex PCR amplification of uidA, cth, invA, ctx, and tl genes was developed enabling simultaneous detection in shellfish of Escherichia coli, an indicator of fecal contamination and microbial pathogens, Salmonella typhimurium, Vibrio vulnificus, V. cholerae, and V. parahaemolyticus, respectively. Each of the five pairs of oligonucleotide primers was found to support PCR amplifications of only its targeted gene. The optimized multiplex PCR reaction utilized a PCR reaction buffer containing 2.5 mM MgCl₂ and primer annealing temperature of 55°C. Oyster tissue homogenate seeded with these microbial pathogens was subjected to DNA purification by the Chelex™ 100 (BioRad) method. The sensitivity of detection for each of the microbial pathogens was ≤10¹–10² cells following a “double” multiplex PCR amplification approach. Amplified target genes in a multiplex PCR reaction were subjected to a colorimetric GeneComb™ (BioRad) DNA-DNA hybridization assay. This assay was rapid and showed sensitivity of detection comparable to the agarose gel electrophoresis method. The colorimetric GeneComb™ assay avoids use of hazardous materials inherent in conventional gel electrophoresis and radioactive-based hybridization methods. Multiplex PCR amplification, followed by colorimetric GeneComb™ DNA-DNA hybridization, has been shown to be an effective, sensitive, and rapid method to detect microbial pathogens in shellfish. Received: 17 November 1997 / Accepted: 17 February 1998     

Nonradioactive labeling and high-sensitive detection of PCR products

The polymerase chain reaction (PCR) represents the most common and widespread method for the direct amplification of specific sequences of nucleic acid target molecules. Incorporation of nonradioactivc labeled nucleotides during PCR byTaq DNA polymerase results in directly detectable amplification products or generates nonradioactively labeled probes for nucleic acid hybridization. Here we provide a reliable and easy to follow protocol for direct incorporation of digoxigenin-(DIG) or biotin-labeled nucleotides during PCR. The combination of high-efficient PCR amplification and high-sensitive digoxigenin technology is leading to the detection of single DNA molecules by applying digoxigenin-specific antibodies in an ELISA-type detection reaction. Following a transfer to nylon membranes, the detection of digoxigenin-labeled amplification products can also be accomplished either with a colorimetric or a chemiluminescent reaction. Using the digoxigenin-labeled amplification products as hybridization probes, sensilivities in the 0.1-pg range are obtained in Southern blot procedures.     

Litter and aerosol sampling of chicken houses for rapid detection of Salmonella typhimurium contamination using gene amplification

Rapid screening of poultry houses for contamination is critical for Salmonella control. Use of air filter sampling has great potential for efficient and reliable monitoring of Salmonella spp., as it could represent an entire poultry house and solve sample-size problems. Two sampling methods (litter and air filter) were compared for detection in four chicken pens inoculated with a S. typhimurium antibiotic resistant strain. Salmonella levels in both litter and air filter samples were determined by PCR amplification and by conventional enrichment. Although amplified DNA was not directly detected, amplified DNA could be detected using a dual probe hybridization sensor. The ratio of the positive samples to total samples determined by gene amplification was much lower than that obtained by conventional enrichments (29/128 versus 102/128 samples). However, the ratio obtained by gene amplification with air filter samples was greater than that with litter samples (26/64 versus 3/64). These results demonstrate that the air filter sampling method is an alternative method of Salmonella detection in poultry house using PCR gene amplification protocol. Journal of Industrial Microbiology & Biotechnology (2000) 24, 379–382. Received 12 August 1999/ Accepted in revised form 17 February 2000     

Self-sustained sequence replication (3SR): an alternative to PCR

 The amplification of target nucleic acids before hybridization is one of the most powerful approaches for the detection of low copy number RNA and DNA. The best known amplification reaction is PCR which has many applications. However, certain drawbacks of the PCR reaction provide a role for alternative amplification methods. One of these methods is the self-sustained sequence replication (3SR) reaction, which is an isothermal method for RNA amplification depending on the action of three enzymes. 3SR has been used in several in vitro applications and has also been modified for in situ use (IS-3SR). We have studied IS-3SR with the measles virus as a model and have found that it can significantly amplify the amount of intracellular RNA. Such a level of amplification could raise the amount of single copy RNA to the level of detection by conventional in situ hybridization. Although careful controls to insure its specificity must be carried out, IS-3SR has several advantages, including ease of use, preserved cell morphology, and specificity for RNA amplification, which make it an attractive alternative to the in situ PCR method. Accepted: 27 June 1997     

Real-time polymerase chain reaction assay for rapid and sensitive detection of anthrax spores in spiked soil and talcum powder

Real-time polymerase chain reaction (real-time PCR) is a laboratory technique based on PCR. This technique is able to detect sequence-specific PCR products as they accumulate in “real time” during the PCR amplification, and also to quantify the number of substrates present in the initial PCR mixture before amplification begins. In the present study, real-time PCR assay was employed for rapid and real-time detection of Bacillus anthracis spores spiked in 0.1 g of soil and talcum powder ranging from 5 to 10⁷ spores. DNA was isolated from spiked soil and talcum powder, using PBS containing 1 % Triton-X-100, followed by heat treatment. The isolated DNA was used as template for real-time PCR and PCR. Real-time PCR amplification was obtained in 60 min under the annealing condition at 60°C by employing primers targeting the pag gene of B. anthracis. In the present study, the detection limit of real-time PCR assay in soil was 10³ spores and10² spores in talcum powder, respectively, whereas PCR could detect 10⁴ spores in soil and 10³ spores in talcum powder, respectively.     

In situ polymerase chain reaction and cycling primed in situ amplification: improvements and adaptations

 Ethanol fixation combined with microwave pretreatment allows rapid and simple detection of signals produced by cycling primed in situ (PRINS) amplification, which uses a single primer, and in situ polymerase chain reaction (ISPCR) in intact cells. After thermal cycling, signals remain as discrete subnuclear spots in the region of amplification and are clearly distinguishable from non-specific background labelling. These methods are applicable to routine blood smears, even after Giemsa staining or immunocytochemistry, and cellular morphology is retained. Chromosome enumeration by cycling PRINS is demonstrated using primers for repeat DNA sequences, whilst single copy sequence detection is demonstrated using bcl-2, CFTR and chromosome 21 specific primer pairs in ISPCR. We show that ethanol fixation supports efficient extension of cycling PRINS products to approximately 550 bp using up to 70 rounds of thermal cycling. Accepted: 15 February 1999     

Detection of Giardia in Environmental Waters by Immuno-PCR Amplification Methods

Genomic DNA was extracted either directly from Giardia muris cysts seeded into environmental surface waters or from cysts isolated by immunomagnetic beads (IMB). A 0.171-kbp segment of the giardin gene was PCR-amplified following “direct extraction” of Giardia DNA from seeded Cahaba river water concentrate with moderate turbidity (780 JTU's), but DNA purified from seeded Colorado river water concentrates with high turbidity (2 × 10⁵ JTUs) failed to amplify. However, if the cysts were first separated by the IMB approach from seeded Cahaba or Colorado river waters, and the DNA released by a freeze-boil Chelex?100 treatment, detection of G. muris by PCR amplification could be achieved at a sensitivity of 3 × 10⁰ or 3 × 10¹ cysts/ml, respectively. If, however, the G. muris cysts used to seed even moderately turbid river waters (780 JTUs) were formalin treated (which is conventionally used for microscopic examination), neither direct extraction nor IMB purification methods yielded amplifiable DNA. Use of immunomagnetic beads to separate Giardia cysts from complex matrices of environmental surface waters followed by DNA release and PCR amplification of the target giardin gene improved the reliability of detection of this pathogen with the required sensitivity. Received: 23 April 1997 / Accepted: 4 August 1997     

PCR Methods for Identification and Specific Detection of Probiotic Lactic Acid Bacteria

Probiotics are defined as “microbes improving animal feed.” Three lactic acid bacteria, previously selected as probiotic for pig feeding, were identified by sequencing the variable V₁ region of the 16S rDNA after PCR amplification primed in the flanking constant region. A V_R region showing strong nucleotide differences between the three probiotic and the reference strains was delimited. Oligonucleotides specific for each strain were designed. A specific assay for probiotic detection was developed, based on a PCR reaction with three primers. Received: 7 December 1995 / Accepted: 30 January 1996     

Molecular technologies used in detecting of sensitive and isoniazid-resistant <Emphasis Type="Italic">Mycobacterium tuberculosis</Emphasis>

Two variants for the detection of single nucleotide polymorphisms in codon 315 of the katG gene of Mycobacterium tuberculosis (MTB) (mutations in this gene are associated with resistance to isoniazid, which is an antituberculosis drug of the first line) have been developed. Two sets of primers, either of which included an additional competitive blocking primer with a 3′-terminal phosphate group (in order to prevent nonspecific amplification), permitted the identification of the most frequent AGC → ACC and AGC → AGA point mutations in codon 315 of the katG gene. Conduction of PCR with a set of two primers, one of which contained five LNA monomers, permitted the detection of any of the six known mutations in codon 315 of the katG gene and, thereby, for the discrimination between isoniazid-sensitive and isoniazid-resistant MTB. The purity and structure of the 17 bp long primers containing LNA-modified nucleotides were characterized by time-of-flight MALDI mass spectrometry, and the 17 bp duplex formed by two LNA-containing complementary oligonucleotides was analyzed by thermal denaturation. The molecular genetic test systems created for differentiating between the wild-type MTB isolates and isoniazid-resistant MTB (an antituberculosis drug of the first line) can be used in clinical laboratories equipped with standard PCR devices; such systems permit the shortening of the time required for the detection of isoniazid resistance of MTB: from 1–3 months by the standard bacteriological methods to 1–3 days by PCR.     

Simultaneous detection of Salmonella spp and Escherichia coli O157:H7 by multiplex PCR

Contamination of foods with pathogens such as Escherichia coli O157:H7 and Salmonella is a major concern worldwide and rapid, sensitive, and reliable methods are needed for detection of these organisms. Since these pathogens can contaminate similar foods and other types of samples, a multiplex polymerase chain reduction (PCR) was designed to allow simultaneous detection of both E. coli O157:H7 and Salmonella spp directly from enrichment cultures. Samples of apple cider, beef carcass wash water, ground beef, and bovine feces were inoculated with both E. coli O157:H7 and S. typhimurium at various bacterial levels. Following enrichment culturing for 20–24 h at 37°C in modified EC broth or buffered peptone water both containing novobiocin, the samples were subjected to a DNA extraction technique or to immunomagnetic separation then tested by the multiplex PCR assay. Four pairs of primers were employed in the PCR: primers for amplification of E. coli O157:H7 eaeA, stx _1/2 and plasmid sequences and for amplification of a portion of the Salmonella invA gene. Four fragments of the expected sizes were amplified in a single reaction and visualized following agarose gel electrophoresis in all the samples inoculated with ≤ 1 CFU g⁻¹ or ml⁻¹. Results can be obtained in approximately 30 h. The multiplex PCR is a potentially powerful technique for rapid and sensitive co-detection of both pathogens in foods and other types of samples. Received 28 December 1997/ Accepted in revised form 19 March 1998     

Interphase cytogenetics in pathology: principles, methods, and applications of fluorescence in situ hybridization (FISH)

 Characteristic chromosome aberrations have been identified in various tumors. Fluorescence in situ hybridization (FISH) using specific probes that are generated by vector cloning or in vitro amplification and labeled with fluorescent dyes allow for the detection of these genetic changes in interphase cells. This technique, that is also referred to as ”interphase cytogenetics”, can be performed in cytological preparations as well as in sections of routinely formaldehyde-fixed and paraffin-embedded tissue. In cancer research and diagnostics, interphase cytogenetics by FISH is used to detect numerical chromosome changes and structural aberrations, e.g., translocations, deletions, or amplifications. In this technical overview, we explain the principles of the FISH method and provide protocols for FISH in cytological preparations and paraffin sections. Moreover, possible applications of FISH are discussed. Accepted: 22 July 1997     

Ultrasensitive nucleic acid biosensors for early cancer diagnostics

We have developed ultrasensitive nucleic acid detection systems involving an amplification step where the analytical signal correlates directly to the amount of nucleic acid in the solution So far, we have performed nucleic acid quantification on several breast cancer susceptibility genes and were able to detect nucleic acid amounts that ranged from 0.1–1.0 fg of nucleic acid, which is at least 1000 times more sensitive than conventional fluorescent detection methods. The biosensors are so sensitive that they can be used for direct detection of breast cancer susceptibility genes in mRNA without involving a PCR step.     

Improved mRNA in situ hybridization on formaldehyde-fixed and paraffin-embedded tissue using signal amplification with different haptenized tyramides

 We report an optimized in situ hybridization (ISH) protocol with a rapid signal amplification procedure based on catalyzed reporter deposition (CARD) to increase the sensitivity of non-isotopic mRNA ISH on formaldehyde-fixed and paraffin-embedded tissue. The CARD method is based on the deposition of haptenized tyramide molecules in the vicinity of hybridized probes catalyzed by horseradish peroxidase. Commercially available and newly synthesized haptenized tyramides, including digoxigenin-, biotin-, di- and trinitrophenyl- as well as fluorescein-tyramide, were compared. The haptenized tyramides were visualized using peroxidase conjugated anti-hapten antibodies followed by the diaminobenzidine reaction. As a test system, we applied digoxigenin-labeled oligonucleotides to detect insulin and vasoactive intestinal polypeptide mRNA in pancreatic endocrine tumors and liver metastases. Our results indicate that specificity, sensitivity, and applicability of oligonucleotide mRNA ISH can be significantly improved by using chemically digoxigenin-labeled oligonucleotide probes and signal amplification by CARD. Furthermore, all tested tyramides provided approximately equal amplification efficiency. In conclusion, CARD signal amplification should further promote mRNA ISH studies on paraffin-embedded tissues and allow for multiple-target nucleic acid detection in situ. Accepted: 1 July 1998     

Multiple Displacement Amplification for Generating an Unlimited Source of DNA for Genotyping in Nonhuman Primate Species

We evaluated a whole genome amplification method—multiple displacement amplification (MDA)—as a means to conserve valuable nonhuman primate samples. We tested 148 samples from a variety of species and sample sources, including blood, tissue, cell-lines, plucked hair and noninvasively collected semen. To evaluate genotyping success and accuracy of MDA, we used routine genotyping methods, including short tandem repeat (STR) analysis, denaturing gradient gel electrophoresis (DGGE), Alu repeat analysis, direct sequencing, and nucleotide detection by tag-array minisequencing. We compared genotyping results from MDA products to genotypes generated from the original (non-MD amplified) DNA samples. All genotyping methods showed good results with the MDA products as a DNA template, and for some samples MDA improved genotyping success. We show that the MDA procedure has the potential to provide a long-lasting source of DNA for genetic studies, which would be highly valuable for the primate research field, in which genetic resources are limited and for other species in which similar sampling constraints apply.     

应用两种基因组快速扩增方法进行病毒芯片杂交鉴定

为了摸索均衡的病毒基因组扩增方法,建立高通量的病毒检测基因芯片技术平台,本研究以甲病毒属的辛德比斯病毒作为检测模型,分别以随机PCR扩增法和MDA( Multiple Displacement Amplification)扩增法扩增病毒基因组,并以两种扩增产物作为模板,扩增辛德比斯病毒的特异基因片段以验证基因组扩增的均衡性;然后将两种基因组扩增产物标记荧光染料后与基因芯片进行杂交;结果表明从两种基因组扩增产物中正确扩增出了辛德比斯的特定基因片段,作为探针可与基因芯片上的靶标基因特异性结合;基因组扩增产物与基因芯片进行杂交,可成功检测到甲病毒属的特异性信号,充分说明随机PCR扩增法和MDA扩增法用于扩增病毒基因组均具有良好的均衡性,扩增产物可用于病毒性病原体的基因芯片检测。     

Use of random amplified polymorphic DNA markers for the detection of Azospirillum strains in soil microcosms

Probes for the detection of Azospirillum strains were obtained from DNA fragments generated by random amplification of polymorphic DNA (RAPD) and tested to assess their specificity towards DNA extracted from pure cultures. The most specific probe, referred to as α4, produced a hybridization signal only with amplified DNA of A. lipoferum ATCC29731. This strain was inoculated, together with two other Azospirillum strains, in soil microcosms of different complexity and its presence tested with the probe α4. This probe confirmed its high specificity with amplified DNA extracted from the soil microcosm and in the presence of other A. lipoferum strains, indicating that the strategy for bacterial detection, based on RAPD markers, is useful for monitoring the presence of a particular strain under environment-like conditions. Other RAPD-derived probes, when tested on soil samples, did not show the same level of specificity as that shown on DNA from pure cultures. This result suggests that some precautions are necessary in the choice of a really specific RAPD marker. In a further development of this strategy, the α4 probe was sequenced and two pairs of “nested” primers were designed, which enabled a diagnostic polymerase chain reaction from soil samples that was specific for the A. lipoferum species. Received: 7 July 1997 / Accepted: 14 October 1997     

Electrochemical genosensor for specific detection of the food-borne pathogen, <Emphasis Type="Italic">Vibrio cholerae</Emphasis>

A disposable horseradish peroxidase (HRP)-based electrochemical genosensor was developed for chronoamperometric detection of single-stranded asymmetric lolB gene PCR amplicon (118 bp in length) of the food-borne pathogen, Vibrio cholerae. A two-step sandwich-type hybridization strategy using two specific probes was employed for specific detection of the target single-stranded DNA (ssDNA). The analytical performances of the detection platform have been evaluated using a synthetic ssDNA (ST3) which was identical to the target single-stranded amplicon and a total of 19 bacterial strains. Under optimal condition, ST3 was calibrated with a dynamic range of 0.4883–15.6250 nM. By coupling asymmetric PCR amplification, the probe-based electrochemical genosensor was highly specific to the target organism (100% specificity) and able to detect as little as 0.85 ng/μl of V. cholerae genomic DNA.     

Identification of wild-type <Emphasis Type="Italic">Mycobacterium tuberculosis</Emphasis> isolates and point mutations associated with isoniazid resistance

Isoniazid resistance in Mycobacterium tuberculosis (MBT) is associated with point mutations in codon 315 of the katG gene. Two PCR technique were developed for detection of point mutations in codon 315. Most frequent point mutations (AGC → ACC and AGC → AGA) were identified in codon 315 by using two sets of primers, either of which included an additional competitive blocking primer with a 3′-terminal phosphate group in order to prevent nonspecific amplification. PCR with a set of two primers, one of which contained five locked nucleic acid monomers (LNA), permits one to detect any of six known mutations in codon 315 of katG and, thereby, discriminate between isoniazid-sensitive and resistant MBT isolates. The structure and purity of the 17-nt long LNA-containing oligonucleotides were characterized by MALDI-TOF mass spectrometry; and the 17 bp duplex formed by two LNA-containing complementary oligonucleotides was analyzed by thermal denaturation.