Enzyme histochemistry on freeze-dried, resin-embedded tissue

We have developed a method for histochemical demonstration of a wide range of enzymes in freeze-dried, resin-embedded tissue. Freeze-dried tissue specimens were embedded without fixation at low temperature (4 degrees C or -20 degrees C) in glycol methacrylate resin or LR Gold resin. Enzyme activity was optimally preserved by embedding the freeze-dried tissue in glycol methacrylate resin. All enzymes studied (oxidoreductases, esterases, peptidases, and phosphatases), except for glucose-6-phosphatase, were readily demonstrated. The enzymes displayed high activity and were accurately localized without diffusion when tissue sections were incubated in aqueous media, addition of colloid stabilizers to the incubating media not being required. Freeze-drying combined with low-temperature resin embedding permits the demonstration of a wide range of enzymes with accurate enzyme localization, high enzyme activity, and excellent tissue morphology.     

Corrosion casting method for the gross anatomy of the blood vascular system of fish

A corrosion cast of the entire blood vascular system was made by a single injection of resin from the heart of carp and a Japanese catfish. Either semipolymerized methyl methacrylate or Mercox CL with 30–50% methyl methacrylate monomer was used as the resin preparation. The latter was better for photographing. Both were polymerized by addition of 1 % benzoyl peroxide. The segmental blood vessels of carp and a catfish showed an alternating arrangement of artery and vein in successive segments with some irregularity.     

Polar resin embedding for Macrotrachela quadricornifera

A new glycol methacrylate (GMA) polar resin technique was used for light microscopy and histochemistry of Macrotrachela quadricornifera. Animals were treated with cold aqueous solution of ethylene glycol (EG), then embedded in the cold. Animals required no conventional chemical fixation as EG stabilizes, dehydrates and cryopreserves their structure. In this way several enzymatic activities are preserved, along with morphology. Moreover, resin reticulate protects tissues against agressive reagents. As a consequence, it is possible to perform different staining procedures, in sequence, on the same section.     

Improved Sensitivity for High Resolution in Situ Hybridization Using Resin Extraction of Methyl Methacrylate Embedded Material

An in situ hybridization procedure resulting in both high resolution and sensitivity was established by using the removable methyl methacrylate resin, Technovit 9100. Young bicel-lular pollen of tobacco (Nicotiana tabacum L. SR-1) was embedded in Technovit 9100 resin and sectioned. The resin was extracted with (2-methoxyethyl)-acetate followed by in situ hybridization with cRNA probes to detect cytoplasmic 18S/25S rRNA. Signal intensity obtained by this procedure was approximately twice as great as that obtained by an earlier procedure using Technovit 7100, a glycol methacrylate resin that cannot be removed from sections. This improvement in sensitivity made it possible to observe subcellular localization of small amounts of RNA as revealed by visualization of plastid 23S rRNA in a generative cell of Plumbago auriculata pollen.     

Copolymers including L-histidine and hydrophobic moiety for preparation of nonbiofouling surface

A new type of copolymer composed of l-histidine (ampholyte) and n-butyl methacrylate (hydrophobic moiety) was developed for the preparation of nonbiofouling surfaces. The copolymer adsorbed onto resin surfaces and made the surface very hydrophilic. The hydrophilization effect was higher than that of bovine serum albumin (BSA). When polystyrene surfaces were coated with the copolymer, both the nonspecific adsorption of protein and the adhesion of cells were significantly reduced in comparison with BSA coating. The newly synthesized polymer is a new and useful candidate for the preparation of nonbiofouling surfaces.     

Dehydrogenase enzyme histochemistry on freezedried or fixed resin-embedded tissue

Summary A method has been developed for the histochemical demonstration of a variety of dehydrogenases in freeze-dried or fixed resin-embedded tissue. Seven dehydrogenases were studied. Lactate dehydrogenase, NADH dehydrogenase and NADPH tetrazolium reductase were all demonstrable in sections of paraformaldehyde-fixed resin-embedded tissue. Freeze-dried specimens were embedded, without fixation, in glycol methacrylate resin or LR Gold resin at either 4°C or –20°C. All the dehydrogenases except succinate dehydrogenase retained their activity in freeze-dried, resin-embedded tissue. Enzyme activity was maximally preserved by embedding the freeze-dried tissue specimens in glycol methacrylate resin at –20°C. The dehydrogenases were accurately localized without any diffusion when the tissue sections were incubated in aqueous media. Addition of a colloid stabilizer to the incubating medium was not required. Freeze-drying combined with low-temperature resin embedding permits accurate enzyme localization without diffusion, maintenance of enzyme activity and excellent tissue morphology.     

Resin tissue microarrays: a universal format for immunohistochemistry.

Tissue microarray (TMA) technology allows the miniaturization and characterization of multiple tissue samples on a single slide and commonly uses formalin-fixed paraffin-embedded (FFPE) tissue or acetone-fixed frozen tissue. The former provides good morphology but can compromise antigenicity, whereas the latter provides compromised morphology with good antigenicity. Here, we report the development of TMAs in glycol methacrylate resin, which combine the advantages of both methods in one embedding format. Freshly collected tissue fixed in -20C acetone or 10% neutral buffered formaldehyde were cored and arrayed into an intermediary medium of 2% agarose before infiltration of the agarose array with glycol methacrylate resin. Acetone-fixed resin TMA demonstrated improved morphology over acetone-fixed frozen TMA, with no loss of antigenicity. Staining for extracellular, cell surface, and nuclear antigens could be realized with monoclonal and polyclonal antibodies as well as with monomeric single-chain Fv preparations. In addition, when compared with FFPE TMA, formalin-fixed tissue in a resin TMA gave enhanced morphology and subcellular detail. Therefore, resin provides a universal format for the construction of TMAs, providing improved tissue morphology while retaining antigenicity, allows thin-section preparation, and could be used to replace preparation of frozen and FFPE TMAs for freshly collected tissue.     

An ORMOSIL-Containing Orthodontic Acrylic Resin with Concomitant Improvements in Antimicrobial and Fracture Toughness Properties

Global increase in patients seeking orthodontic treatment creates a demand for the use of acrylic resins in removable appliances and retainers. Orthodontic removable appliance wearers have a higher risk of oral infections that are caused by the formation of bacterial and fungal biofilms on the appliance surface. Here, we present the synthetic route for an antibacterial and antifungal organically-modified silicate (ORMOSIL) that has multiple methacryloloxy functionalities attached to a siloxane backbone (quaternary ammonium methacryloxy silicate, or QAMS). By dissolving the water-insoluble, rubbery ORMOSIL in methyl methacrylate, QAMS may be copolymerized with polymethyl methacrylate, and covalently incorporated in the pressure-processed acrylic resin. The latter demonstrated a predominantly contact-killing effect on Streptococcus mutans ATCC 36558 and Actinomyces naselundii ATCC 12104 biofilms, while inhibiting adhesion of Candida albicans ATCC 90028 on the acrylic surface. Apart from its favorable antimicrobial activities, QAMS-containing acrylic resins exhibited decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility, when compared with QAMS-free acrylic resin. The covalently bound, antimicrobial orthodontic acrylic resin with improved toughness represents advancement over other experimental antimicrobial acrylic resin formulations, in its potential to simultaneously prevent oral infections during appliance wear, and improve the fracture resistance of those appliances.     

Effects of molecular structure of the resins on the volumetric shrinkage and the mechanical strength of dental restorative composites

To prepare a dental composite that has a low amount of curing shrinkage and excellent mechanical strength, various 2,2-bis[4-(2-hydroxy-3-methacryloyloxy propoxy) phenyl] propane (Bis-GMA) derivatives were synthesized via molecular structure design, and afterward, properties of their mixtures were explored. Bis-GMA derivatives, which were obtained by substituting methyl groups for hydrogen on the phenyl ring in the Bis-GMA, exhibited lower curing shrinkage than Bis-GMA, whereas their viscosities were higher than that of Bis-GMA. Other Bis-GMA derivatives, which contained a glycidyl methacrylate as a molecular end group exhibited reduced curing shrinkage and viscosity. Methoxy substitution for hydroxyl groups on the Bis-GMA derivatives was performed for the further reduction of the viscosity and curing shrinkage. Various resin mixtures, which had the same viscosity as the commercial one, were prepared, and their curing shrinkage was examined. A resin mixture containing 2,2-bis[3,5-dimethyl, 4-(2-methoxy-3-methacryloyloxy propoxy) phenyl] propane] (TMBis-M-GMA) as a base resin and 4-tert-butylphenoxy-2-methyoxypropyl methacrylate (t-BP-M-GMA) as a diluent exhibited the lowest curing shrinkage among them. The composite prepared from this resin mixture also exhibited the lowest curing shrinkage along with enhanced mechanical properties.     

Influence of surface treatments on the flexural strength of denture base repair

doi: 10.1111/j.1741‐2358.2011.00454.x Influence of surface treatments on the flexural strength of denture base repair Objective: The purpose of this study was to evaluate the flexural strength of repairs made with autopolymerising acrylic resin after different treatments of joint surfaces. Material and Methods: Fifty rectangular specimens were made with heat‐polymerised acrylic resin and 40 were repaired with autopolymerising acrylic resin following joint surface treatments: group 1 (intact specimens), group 2 (chemical treatment: wetting with methyl‐methacrylate for 180 s), group 3 (abraded with silicon carbide paper), group 4 (abraded and wetting with methyl‐methacrylate for 180 s) and group 5 (without surface treatment). The flexural strength was measured by a three‐point bending test using a universal testing machine with a 100 Kgf load cell in the centre of repair at 5 mm/min cross‐head speed. All data were analysed using one‐way anova and Tukey HSD test for multiple comparisons (p < 0.05). Results: Among repaired specimens, groups 2 and 4 had 66.53 ± 3.4 and 69.38 ± 1.8 MPa mean values and were similar. These groups had superior flexural strength than groups 3 and 5 that were similar and had 54.11 ± 3.4 and 51.24 ± 2.8 MPa mean values, respectively. Group 1 had a mean value of 108.30 ± 2.8 MPa being the highest result. Conclusion: It can be concluded that the treatment of the joint surfaces with methyl‐methacrylate increases the flexural strength of denture base repairs, although the strength is still lower than that observed for the intact denture base resin. Abrasion with sandpaper was not able to influence the flexural strength of repaired denture bases.     

Enzyme histochemistry on freeze-substituted glycol methacrylate-embedded tissue

We developed a method for histochemical demonstration of a wide range of enzymes in freeze-substituted glycol methacrylate-embedded tissue. Tissue specimens were freeze-substituted in acetone and then embedded at low temperature in glycol methacrylate resin. All enzymes studied (oxidoreductases, hydrolases) were readily demonstrated. The enzymes displayed high activity and were accurately localized without diffusion when tissue sections were incubated in aqueous media, addition of colloid stabilizers to the incubating media not being required. Freeze-substitution combined with low-temperature glycol methacrylate embedding permits the demonstration of a wide range of enzymes with accurate enzyme localization, maintenance of enzyme activity, and excellent tissue morphology.     

Penetration of Stain in Ultrathin Sections of Tobacco Mosaic Virus

Purified preparations of tobacco mosaic virus (TMV) and pieces of tomato leaves infected with TMV were embedded in methacrylate or epoxy resin, sectioned, and stained with 1.0% strontium permanganate for electron microscopy. In sections containing purified and intracellular virus, the apparent length of stained particles varied directly with section thickness, indicating stain penetration beyond the surface of the section. Penetration was demonstrated also by stereoscopy. Penetration was less complete when sections were allowed to dry before staining. In most instances the number of identifiable particles per unit area was independent of section thickness but increased when both surfaces of the sections were stained instead of only one surface. Staining was prevented by thin films of methacrylate or epoxy resin placed between the virus section and staining solution. Most results supported the view that electron scattering capacity was enhanced only in particles which intersected the surface of the section exposed to permanganate.     

High frequency of in situ hybridization on thin plastic sections of human placenta with a cDNA probe for beta hCG

We describe two different techniques with plastic embedding in in situ hybridization histochemistry (ISHH). Their applicability was demonstrated by use of human placenta of the tenth gestational week and a tritium-labeled cDNA probe for the beta-subunit of hCG. In the first method, ISHH was performed on whole pieces of tissue (en bloc ISHH) pretreated with a weak acid solution, embedded in methacrylate, and sectioned at 3 microns for autoradiography. In the second technique, en bloc ISHH was carried out on tissue pre-treated with the weak acid and thereafter with detergent to further facilitate probe penetration. An acrylic resin was used for embedding, and section thickness was reduced to 1 microns. With both techniques, beta hCG cDNA/mRNA hybrids were localized exclusively to the syncytiotrophoblast (ST), in agreement with a previous study using sections of frozen placentas for hybridization to the same probe. However, owing to the higher resolution of the plastic sections the reliability of this localization was greatly increased. The number of autoradiographic grains over the acrylic resin 1-microns sections was found to be considerably higher than that over the methacrylate 3-microns sections. This study showed that treatment of tissue with detergent before en bloc ISHH, with subsequent embedding in acrylic resin and sectioning at 1 microns, gives high resolution in combination with a high signal-to-noise ratio after autoradiography. As the acrylic resin permits cutting of ultrathin sections, the results suggest that the technique may become useful for ISHH studies at the subcellular level.     

Dental composite resin porosity and effect on water absorption

The aims of this study were: 1) to characterize the solubility and water absorption of different composite resins used as dental restorative materials; 2) to analyse their surface morphology using S.E.M. The resins tested were a mixture of glycidyl methacrylate (Bis-GMA) and TEGMA filled with silane-coated particles of inorganic fillers, and Bis-GMA and urethane resin. Cylindrical samples of composite resin were polymerized and stored in distilled water and weighed after different times. SEM analysis demonstrated voids and porous in several samples. The present study shows that dental restorative composite loose a small percentage of their components during storage time and that the type of resin, the nature of fillers and the methods of polymerization greatly influence water uptake and solubility of dental composite resin materials. These findings could explain the loss of anatomic form and the occlusal degradation of dental composites in "in vivo" conditions.     

Glycol Methacrylate Embedding of Algmate-Polylysine Microencapsulated Pancreatic Islets

A method for processing and embedding alginate-polylysine microencapsulated pancreatic tissue in glycol methacrylate resin (GMA) is described. Fixation in 4% phosphate buffered formaldehyde, processing in ascending concentrations of glycol methacrylate monomer and embedding in Technovit 7100 results in well preserved morphological details of hydrogels, hydrogel-cell interfaces, and encapsulated pancreatic tissue. Routine staining with Loeffler's methylene blue, hematoxylin and eosin, and Romanovsky-Giemsa gave excellent images of the GMA embedded alginate polylysine membrane and tissues allowing cells on the outside of the capsule to be analyzed effectively as part of the foreign body reaction against the capsule membrane.     

Enzymatic acrylation of 2-hydroxy-γ-butyrolactone to synthesize the gamma butyrolactone methacrylate (GBLMA) for photoresist

Lipase-mediated acrylation has gained much attention instead of traditional chemical process, since it enables specific catalysis under benign conditions. The effect of acyl donors on the acrylation of 2-hydroxy-γ-butyrolactone by Novozym 435 (immobilized lipase B from Candida antarctica) was investigated. Among acyl donors, vinyl methacrylate was selected to synthesize γ-butyrolactone methacrylate (GBLMA). The effects of solvent and reaction temperature on the acrylation using vinyl methacrylate were presented. The highest rate of conversion was obtained using methyl tert-butyl ether (>80%) as a solvent, of which a log P value is greater than other solvents tested. The conversion rate increased as the reaction temperature rose from 30 to 60°C and the conversion rate approached 95% at 60oC. The gamma butyrolactone methacrylate (GBLMA) synthesized with vinyl methacrylate at optimized conditions, in which MTBE is used as a solvent and the reaction is carried out at 60°C can be applicable as a monomer for synthesis of photoresist resin.     

Glycol Methacrylate Embedding of Algmate-Polylysine Microencapsulated Pancreatic Islets

A method for processing and embedding alginate-polylysine microencapsulated pancreatic tissue in glycol methacrylate resin (GMA) is described. Fixation in 4% phosphate buffered formaldehyde, processing in ascending concentrations of glycol methacrylate monomer and embedding in Technovit 7100 results in well preserved morphological details of hydrogels, hydrogel-cell interfaces, and encapsulated pancreatic tissue. Routine staining with Loeffler's methylene blue, hematoxylin and eosin, and Romanovsky-Giemsa gave excellent images of the GMA embedded alginate polylysine membrane and tissues allowing cells on the outside of the capsule to be analyzed effectively as part of the foreign body reaction against the capsule membrane.     

Synthesis, characterization, properties, and drug release of poly(alkyl methacrylate-b-isobutylene-b-alkyl methacrylate)

Polyisobutylene (PIB)-based block copolymers have attracted significant interest as biomaterials. Poly(styrene-b-isobutylene-b-styrene) (SIBS) has been shown to be vascularly compatible and, when loaded with paclitaxel (PTx) and coated on a coronary stent, has the ability to deliver the drug directly to arterial walls. Modulation of drug release from this polymer has been achieved by varying the drug/polymer ratio, by blending SIBS with other polymers, and by derivatizing the styrene end blocks to vary the hydrophilicity of the copolymer. In this paper, results are reported on the synthesis, physical properties, and drug elution profile of PIB-based block copolymers containing methacrylate end blocks. The preparation of PIB-poly(alkyl methacrylate) block copolymers has been accomplished by a new synthetic methodology using living cationic and anionic polymerization techniques. 1,1-Diphenylethylene end-functionalized PIB was prepared from the reaction of living PIB and 1,4-bis(1-phenylethenyl)benzene, followed by the methylation of the resulting diphenyl carbenium ion with dimethylzinc (Zn(CH(3))(2)). PIB-DPE was quantitatively metalated with n-butyllithium in tetrahydrofuran, and the resulting macroinitiator could initiate the polymerization of methacrylate monomers, yielding block copolymers with high blocking efficiency. Poly(methyl methacrylate-b-isobutylene-b-methyl methacrylate) (PMMA-b-PIB-b-PMMA) and poly(hydroxyethyl methacrylate-b-isobutylene-b-hydroxyethyl methacrylate) (PHEMA-b-PIB-b-PHEMA) triblock copolymers were synthesized and used as drug delivery matrixes for coatings on coronary stents. The PMMA-b-PIB-b-PMMA/PTx system displayed zero-order drug release, while stents coated with PHEMA-b-PIB-b-PHEMA/PTx formulations exhibited a significant initial burst release of PTx. Physical characterization using atomic force microscopy and differential scanning calorimetry of the formulated PMMA-b-PIB-b-PMMA coating matrix indicated the partial miscibility of PTx with the PMMA microphase of the matrix.     

Application of glycol methacrylate embedding to herbarium specimens of fruits

Aldehyde fixation and glycol methacrylate embedding were applied to herbarium specimens of fruits of the Compositae. Sections 1-2 micron thick were cut with glass knives. Softening was unnecessary and the hydrophilic properties of the resin permitted staining with a number of dyes. Specimens were examined with bright field and polarized light microscopy. The technique gives good structural preservation and resolution even with 81-year-old herbarium material.     

Enzyme histochemical demonstration of NADH dehydrogenase on resin-embedded tissue

We describe a method for enzyme histochemical demonstration of NADH dehydrogenase in cold (4 degrees C)-processed resin-embedded tissue. The effects on NADH dehydrogenase activity of processing tissue through a variety of dehydrating agents and embedding in three different acrylic resins were evaluated. The optimal procedure to maintain NADH dehydrogenase activity used a short (3-hr) fixation in 1% paraformaldehyde solution, followed by dehydration in acetone and embedding in glycol methacrylate resin. Embedding of tissue in resin combined preservation and accurate localization of NADH dehydrogenase activity with good tissue morphology. Blocks of the resin-embedded tissue could be stored at room temperature for at least 6 months without loss of NADH dehydrogenase activity.