Identification and Application of Plasmids Suitable for Transfer of Foreign DNA to Members of the Genus Gordonia

Gene transfer systems for Gordonia polyisoprenivorans strains VH2 and Y2K based on electroporation and conjugation, respectively, were established. Several parameters were optimized, resulting in transformation efficiencies of >4 × 10⁵ CFU/μg of plasmid DNA. In contrast to most previously described electroporation protocols, the highest efficiencies were obtained by applying a heat shock after the intrinsic electroporation. Under these conditions, transfer and autonomous replication of plasmid pNC9503 was also demonstrated to proceed in G. alkanivorans DSM44187, G. nitida DSM44499^T, G. rubropertincta DSM43197^T, G. rubropertincta DSM46038, and G. terrae DSM43249^T. Conjugational plasmid DNA transfer to G. polyisoprenivorans resulted in transfer frequencies of up to 5 × 10⁻⁶ of the recipient cells. Recombinant strains capable of polyhydroxyalkanoate synthesis from alkanes were constructed.     

Electrotransformation of Clostridium thermocellum

Electrotransformation of several strains of Clostridium thermocellum was achieved using plasmid pIKm1 with selection based on resistance to erythromycin and lincomycin. A custom-built pulse generator was used to apply a square 10-ms pulse to an electrotransformation cuvette consisting of a modified centrifuge tube. Transformation was verified by recovery of the shuttle plasmid pIKm1 from presumptive transformants of C. thermocellum with subsequent PCR specific to the mls gene on the plasmid, as well as by retransformation of Escherichia coli. Optimization carried out with strain DSM 1313 increased transformation efficiencies from <1 to (2.2 +/- 0.5) x 10(5) transformants per micro g of plasmid DNA. Factors conducive to achieving high transformation efficiencies included optimized periods of incubation both before and after electric pulse application, chilling during cell collection and washing, subculture in the presence of isoniacin prior to electric pulse application, a custom-built cuvette embedded in an ice block during pulse application, use of a high (25-kV/cm) field strength, and induction of the mls gene before plating the cells on selective medium. The protocol and preferred conditions developed for strain DSM 1313 resulted in transformation efficiencies of (5.0 +/- 1.8) x 10(4) transformants per micro g of plasmid DNA for strain ATCC 27405 and approximately 1 x 10(3) transformants per micro g of plasmid DNA for strains DSM 4150 and 7072. Cell viability under optimal conditions was approximately 50% of that of controls not exposed to an electrical pulse. Dam methylation had a beneficial but modest (7-fold for strain ATCC 27405; 40-fold for strain DSM 1313) effect on transformation efficiency. The effect of isoniacin was also strain specific. The results reported here provide for the first time a gene transfer method functional in C. thermocellum that is suitable for molecular manipulations involving either the introduction of genes associated with foreign gene products or knockout of native genes.     

A highly efficient electroporation system for transformation of Yersinia

The various pathogenic Yersinia species are not readily and efficiently transformed by classical methods. For this reason, the electroporation technique was applied for genetic transformation of these species. Using optimal conditions, we were able to transform the six Yersinia strains studied with the two most widely used groups of plasmids: pSU2718 (a pACYC184 derivative) and pK19 (a pUC19 derivative). Only Yersinia enterocolitica (Y. e.) serotype 0:8 gave poor results (less than 5 x 10(2) transformants/microgram) DNA). Electrical transformation of the other species resulted in high efficiencies, up to 10(5) transformants/microgram DNA for Y. e. serotypes 0:3 and 0:9, 10(6) for Y. pseudotuberculosis and 10(7) for Y. pestis. The results varied for each strain with the type of plasmid used. Neither the introduced foreign plasmid nor the resident 72-kb virulence plasmid underwent detectable deletions. Transformation was most efficient with supercoiled DNA, decreasing by one and four orders of magnitude for relaxed circular and linearized plasmids, respectively. The ability to easily and efficiently transfer plasmid DNA via electroporation will greatly facilitate the application of recombinant DNA technology for direct cloning and analysis of significant genes into Yersinia.     

Gordonia namibiensis sp. nov., a novel nitrile metabolising actinomycete recovered from an African sand

A polyphasic approach was used to establish the taxonomic position of two actinomycetes isolated from a Namibian soil and shown to utilise nitrile compounds as growth substrates. The organisms, strains NAM-BN063AT and NAM-BN063B, had chemical and morphological properties consistent with their assignment to the genus Gordonia. Direct 165 rRNA sequencing studies confirmed the taxonomic position of the strains following the generation of phylogenetic trees using four different algorithms. The strains consistently formed a distinct phylogenetic line within the evolutionary radiation occupied by gordoniae and were most closely related to Gordonia rubropertincta DSM 43197T. DNA:DNA relatedness studies indicated that the two organisms belonged to a genomic species that was readily distinguished from G. rubropertincta. The unique phenotypic profile of the strains sharply separated them from representatives of all of the validly described species of Gordonia. The combination of genotypic and phenotypic data indicates that the two strains should be classified in the genus Gordonia as a new species. The name proposed for this taxon is Gordonia namibiensis, the type strain is NAM-BN063AT (= DSM 44568T = NCIMB 13780T).     

Multifactorial experimental design for optimizing transformation: Electroporation of Streptococcus thermophilus

A multifactorial process was used to optimize transformation of Streptococcus thermophilus by electroporation. Simple experimental designs were applied to study three, four, or five factors in eight experiments. Four qualitative factors, growth and recovering media, and plasmid and bacterial strains, were studied empirically. Eight quantitative factors, including electrical, physiological, and chemical parameters, were studied by fractional factorial designs. Effects of individual parameters as well as interactions between them were investigated and optimized. Optimization was performed for one S. thermophilus strain, ST11, and proved to work for all other tested strains of the same species. Transformation efficiencies of 9 x 10(2) to 6 x 10(5) transformants per microgram DNA were achieved, depending on the strains and vectors used. (c) 1994 John Wiley & Sons, Inc.     

A plasmid which can be transferred between Escherichia coli and Pasteurella haemolytica by electroporation and conjugation

Three broad-host-range plasmids (pRK290, pSa4 and pKT230) and one native Pasteurella haemolytica plasmid (pPH33) were used in transformation experiments with P. haemolytica strains T179 (serotype A1), Y216 (serotype A2) and its capsular-deficient variant Y216/NS1. No transformants were detected with either heat-shock or freeze-thaw techniques. However, by electroporation, all P. haemolytica strains were transformed by pPH33 but not by pRK290 or pSa4. The highest frequency obtained was 91 x 10(4) transformants per microgram of pPH33 DNA with P. haemolytica strain Y216/NS1. Although pPH33 itself was non-transmissible by conjugation, it could be mobilized from Escherichia coli, using the transfer function of the IncP plasmid pRK2013, into P. haemolytica at a frequency of 0.3-2.2 x 10(-3) per recipient cell.     

Optimization of technical conditions for the transformation of Lactobacillus acidophilus strains by electroporation

AIMS: To optimize the conditions for electroporating foreign plasmid DNA into Lactobacillus acidophilus ATCC 43121. METHODS AND RESULTS: The conditions of electroporation were optimized to improve the transformation efficiency. Plasmid pNZ123 containing multicloning site and chloramphenicol resistance was employed to construct a cloning vector. The optimum electroporation conditions for the maximum transformation efficiency were a pulse strength of 12.5 kV cm(-1), a pulse number of 10, a pulse interval of 500 ms, and pNZ123 plasmid DNA concentration of 25 ng microl(-1). Under the optimum conditions the transformation efficiency of L. acidophilus ATCC 43121 was 1.84 +/- 0.13 x 10(4) (+/- standard error of measurements) CFU per mug of plasmid DNA. Other strains of L. acidophilus showed transformation efficiencies ranging from 1.38 +/- 0.02 x 10(4) to 9.32 +/- 0.54 x 10(4) under these conditions. A green fluorescent protein (GFP) was successfully expressed and detected by fluorescence microscopy when the pKU::slpA-GFP, pNZ123 containing GFP gene, was transformed in L. acidophilus ATCC 43121 under the optimum conditions. CONCLUSIONS: The results suggest that electrical parameters, antibiotic concentration, and host specificity play important roles to determine transformation efficiency of lactobacilli. The optimum conditions for the transformation of L. acidophilus ATCC 43121 may be applied to improve transformation efficiency of other lactobacilli. SIGNIFICANCE AND IMPACT OF THE STUDY: The optimized conditions for electrotransformation may provide a mean to improve the introduction of foreign DNA into L. acidophilus to be used as a vehicle for a heterologous protein expression.     

Transformation of Actinomyces spp. by a gram-negative broad-host-range plasmid.

The gram-negative broad-host-range vector pJRD215 was transferred by electroporation into strains of Actinomyces viscosus or Actinomyces naeslundii at efficiencies which ranged from 10(2) to 10(7) transformants per microgram of plasmid DNA. The Actinomyces transformants expressed pJRD215-encoded resistance to kanamycin and streptomycin. Moreover, the transforming plasmid DNA had not undergone any deletions or rearrangements, nor had it integrated into the genomes of these strains.     

Genetic transformation of various species of Enterococcus by electroporation

A transformation system for Enterococcus faecalis was developed which uses untreated (i.e., non-protoplasted) cells and the electroporation technique. The optimized protocol resulted in transformation efficiencies of up to 4 x 10(6) transformants per microgram of plasmid DNA. All strains of E. faecalis tested could be transformed by this method, albeit with differing transformation efficiencies. Using the protocol optimized for E. faecalis we successfully transformed Enterococcus faecium, E. hirae, E. malodoratus and E. mundtii.     

Electroporation: application to human lymphoid cell lines for stable introduction of a transactivator gene of human T-cell leukemia virus type I.

Conditions were developed for stable introduction of foreign DNA into human lymphoid cell lines by electroporation. To introduce stably the p40 gene of human T-cell leukemia virus type I (HTLV-I) into the human lymphoid cell line Jurkat, the p40 expressing plasmid, pMAXRHneo-1, which carries the neo resistant gene, was transfected into Jurkat cells at a voltage of 2500 V and capacitance of 21.7 microF, and stable transformants were screened for neo (G418) resistance. The frequency of transformants was more than one per 2 x 10(5) cells used initially. Clones that were resistant to G418 were shown to have the p40 gene integrated into the host genome and to express mRNA and protein from the introduced plasmid. Expression of p40 in the transformed Jurkat cells was also confirmed by testing the trans-activating effect of HTLV-I enhancer by p40. High frequencies of stable transformations of 10(-4) to 10(-6) were also reproducibly obtained by electroporation of the human T cell lines HSB-2 and TALL-1, a human B cell line Raji, a human monocytic cell line U937, and a human erythroleukemia cell line K562. These results demonstrate that electroporation is a very efficient method for introducing foreign DNA into human lymphoid cell lines.     

Tools for functional postgenomic analysis of listeria monocytogenes

We describe the development of genetic tools for regulated gene expression, the introduction of chromosomal mutations, and improved plasmid transfer by electroporation in the food-borne pathogen Listeria monocytogenes. pIMK, a kanamycin-resistant, site-specific, integrative listeriophage vector was constructed and then modified for overexpression (pIMK2) or for isopropyl-beta-d-thiogalactopyranoside (IPTG)-regulated expression (pIMK3 and pIMK4). The dynamic range of promoters was assessed by determining luciferase activity, P60 secretion, and internalin A-mediated invasion. These analyses demonstrated that pIMK4 and pIMK3 have a stringently controlled dynamic range of 540-fold. Stable gene overexpression was achieved with pIMK2, giving a range of expression for the three vectors of 1,350-fold. The lactococcal pORI280 system was optimized for the generation of chromosomal mutations and used to create five new prfA star mutants. The combination of pIMK4 and pORI280 allowed streamlined creation of "IPTG-dependent" mutants. This was exemplified by creation of a clean deletion mutant with deletion of the universally essential secA gene, and this mutant exhibited a rapid loss of viability upon withdrawal of IPTG. We also improved plasmid transfer by electroporation into three commonly used laboratory strains of L. monocytogenes. A 125-fold increase in transformation efficiency for EGDe compared with the widely used protocol of Park and Stewart (S. F. Park and G. S. Stewart, Gene 94:129-132, 1990) was observed. Maximal transformation efficiencies of 5.7 x 10(6) and 6.7 x 10(6) CFU per mug were achieved for EGDe and 10403S, respectively, with a replicating plasmid. An efficiency of 2 x 10(7) CFU per mug is the highest efficiency reported thus far for L. monocytogenes F2365.     

Transformation of Bacillus thuringiensis vegetative cells by electroporation

A highly efficient procedure for the transformation of Bacillus thuringiensis and Bacillus subtilis using covalently closed circular plasmid DNA was developed by using the small Staphylococcus aureus plasmid pC194 and electroporation. We have achieved transformation efficiencies in B. thuringiensis subsp. kurstaki (HD-73) greater than 5 x 10(6) transformants/micrograms plasmid DNA. The electro-transformation (or electroporation) procedure also worked with B. subtilis 168 although at a 200-fold less level of efficiency. The results indicated that the plasmid exists in double and single-stranded forms both in B. subtilis and B. thuringiensis. A second single-stranded species was also observed in both species. This technique may prove to be applicable to other members of the genus Bacillus.     

High efficiency electroporation of intact Corynebacterium glutamicum cells

High-frequency electroporation of whole Corynebacterium glutamicum cells without enzymatic pretreatment was achieved. Under optimized conditions concerning growth stage, washing of cells, cell concentration and pulse parameter transformation efficiencies of far more than 10(7) transformants per microgram pWST4B plasmid DNA were reached. Using electroporation, linearised and subsequently religated plasmid as well as chimeric ligase reaction products were directly introduced into C. glutamicum with reasonable efficiencies. Electrotransformation efficiency was reduced about 10(5)-fold for plasmid DNA cycled through E. coli JM83. Restriction deficient mutants of C. glutamicum were isolated which could be efficiently transformed with foreign DNA.     

Improved method for electroporation of Staphylococcus aureus

We have developed a significantly improved method for the electroporation of plasmid DNA into Staphylococcus aureus. The highest transformation efficiency achieved with this procedure was 4.0 x 10(8) transformants per microgram of plasmid pSK265 DNA. This represents a 530-fold improvement over the previously reported optimum efficiency of 7.5 x 10(5) transformants per microgram of plasmid DNA after electroporation of S. aureus cells [9]. Identical results were obtained when electrocompetent cells, which had been stored frozen at -80 degrees C, were used. The improved efficiency is due primarily to the use of a modified medium (designated as B2 medium) and secondarily to the use of 0.1-cm cuvettes. Several other plasmids (pI258, pMH109, and pSK270) were also electrotransformed into competent cells using our procedure, and for each plasmid, the transformation efficiency was significantly reduced compared to that observed when pSK265 DNA was used. With respect to plasmid pI258, the transformation efficiency was 3500-fold higher than that reported previously for transformation of this plasmid into S. aureus RN4220 [9]. The optimized electroporation procedure was less successful in transforming other staphylococci. Electrocompetent cells of S. aureus ATCC 29213 and S. epidermidis ATCC 12228 produced 5.5 x 10(5) and 5 x 10(3) transformants per microgram of pSK265 DNA, respectively.     

Electroporation of Bradyrhizobium japonicum

Summary Electroporation offers a fast, efficient and reproducible way to introduce DNA into bacteria. We have successfully used this technique to transform two commercially important strains of Bradyrhizobium japonicum, the nitrogen-fixing soybean symbiont. Initially, electroporation conditions were optimized using plasmid DNA which had been prepared from the same B. japonicum strain into which the{imDNA was to b}e transformed. Efficiencies of 10⁵-10⁶ transformants/g DNA were obtained for strains USDA 110 and 61A152 with ready-to-use frozen cells. Successful electroporation of B. japonicum with plasmid DNA prepared from Escherichia coli varied with the E. coli strain from which the plasmid was purified. The highest transformation efficiencies (10⁴ transformants/g DNA) were obtained using DNA prepared from a dcm ^– dam ^– strain of E. coli. This suggests that routine isolation of DNA from an E. coli strain incapable of DNA modification should help in increasing transformation efficiencies for other strains of bacteria where DNA restriction appears to be a significant obstacle to successful transformation. We have also monitored the rate of spontaneous mutation in electroporated cells and saw no significant difference in the frequency of streptomycin resistance for electroporated cells compared to control cells.     

Characterization of pRGO1, a plasmid from Propionibacterium acidipropionici, and its use for development of a host-vector system in propionibacteria

The complete nucleotide sequence of pRGO1, a cryptic plasmid from Propionibacterium acidipropionici E214, was determined. pRGO1 is 6, 868 bp long, and its G+C content is 65.0%. Frame analysis of the sequence revealed six open reading frames, which were designated Orf1 to Orf6. The deduced amino acid sequences of Orf1 and Orf2 showed extensive similarities to an initiator of plasmid replication, the Rep protein, of various plasmids of gram-positive bacteria. The amino acid sequence of the putative translation product of orf3 exhibited a high degree of similarity to the amino acid sequences of DNA invertase in several bacteria. For the putative translation products of orf4, orf5, and orf6, on the other hand, no homologous sequences were found. The function of these open reading frames was studied by deletion analysis. A shuttle vector, pPK705, was constructed for shuttling between Escherichia coli and a Propionibacterium strain containing orf1 (repA), orf2 (repB), orf5, and orf6 from pRGO1, pUC18, and the hygromycin B-resistant gene as a drug marker. Shuttle vector pPK705 successfully transformed Propionibacterium freudenreichii subsp. shermanii IFO12426 by electroporation at an efficiency of 8 x 10(6) CFU/microg of DNA under optimized conditions. Transformation of various species of propionibacteria with pPK705 was also performed at efficiencies of about 10(4) to 10(7) CFU/microg of DNA. The vector was stably maintained in strains of P. freudenreichii subsp. shermanii, P. freudenreichii, P. pentosaceum, and P. freudenreichii subsp. freudenreichii grown under nonselective conditions. Successful manipulation of a host-vector system in propionibacteria should facilitate genetic studies and lead to creation of genes that are useful industrially.     

Isolation and characterization of a mildly thermophilic nonsulfur purple bacterium containing bacteriochlorophyll b

A method for transformation of whole Bacillus amyloliquefaciens cells by electroporation was developed. The procedure is as efficient as the protoplast transformation method, resulting in up to 10(5) transformants/micrograms plasmid DNA, but requires less effort and time. Cells for electroporation were grown to late exponential phase in a rich medium supplemented with 0.25 M sucrose, washed with and resuspended in 0.25 M sucrose, 1 mM HEPES, 1 mM MgCl2, 10% (v/v) glycerol, pH 7.0, at 3-5 x 10(10) cells/ml for storage at -80 degrees C. The highest transformation frequency was obtained at 7.5 kV/cm with a 25 microF capacitor. The transformation efficiency increased linearly with DNA concentration at least over the range 10 ng-12.5 micrograms/ml. Transformations with ligated DNA and of industrial strains were also successful. In addition, B. subtilis cells treated as above could be transformed by electroporation, resulting in 10(4) transformants/micrograms DNA at 12.5 kV/cm.     

Electrotransformation of Clostridium thermocellum

Electrotransformation of several strains of Clostridium thermocellum was achieved using plasmid pIKm1 with selection based on resistance to erythromycin and lincomycin. A custom-built pulse generator was used to apply a square 10-ms pulse to an electrotransformation cuvette consisting of a modified centrifuge tube. Transformation was verified by recovery of the shuttle plasmid pIKm1 from presumptive transformants of C. thermocellum with subsequent PCR specific to the mls gene on the plasmid, as well as by retransformation of Escherichia coli. Optimization carried out with strain DSM 1313 increased transformation efficiencies from <1 to (2.2 ± 0.5) × 10⁵ transformants per μg of plasmid DNA. Factors conducive to achieving high transformation efficiencies included optimized periods of incubation both before and after electric pulse application, chilling during cell collection and washing, subculture in the presence of isoniacin prior to electric pulse application, a custom-built cuvette embedded in an ice block during pulse application, use of a high (25-kV/cm) field strength, and induction of the mls gene before plating the cells on selective medium. The protocol and preferred conditions developed for strain DSM 1313 resulted in transformation efficiencies of (5.0 ± 1.8) × 10⁴ transformants per μg of plasmid DNA for strain ATCC 27405 and ~1 × 10³ transformants per μg of plasmid DNA for strains DSM 4150 and 7072. Cell viability under optimal conditions was ~50% of that of controls not exposed to an electrical pulse. Dam methylation had a beneficial but modest (7-fold for strain ATCC 27405; 40-fold for strain DSM 1313) effect on transformation efficiency. The effect of isoniacin was also strain specific. The results reported here provide for the first time a gene transfer method functional in C. thermocellum that is suitable for molecular manipulations involving either the introduction of genes associated with foreign gene products or knockout of native genes.     

Plasmid transformation of Ruminococcus albus by means of high-voltage electroporation

To apply recombinant DNA techniques to the genetic manipulation of cellulolytic ruminal bacteria, a plasmid vector transformation system must be available. The objective of this work was to develop a system for plasmid transformation of Ruminococcus albus. Using high voltage electrotransformation, pSC22 and pCK17 plasmid vectors, derived from lactic acid bacteria plasmids and replicating via single-stranded DNA intermediate, were successfully introduced into three freshly isolated R. albus strains and into R. albus type strain ATCC 27210. The optimization of the electrotransformation condition raised the electroporation efficiency up to 3 x 10(5) transformants per microgram of pSC22 plasmid.