Comparative assessment of chelated spent mushroom substrates as casing material for the production of Agaricus bisporus

Spent mushroom substrate (SMS) leached with water or treated with chelating agents to remove metal cations, pasteurised to remove any harmful micro-organisms and mixed with peat has potential as a casing material for mushroom production. The microbial and chemical changes in SMS after treatment with citric acid, ethylene diaminetetraacetic acid (EDTA) and water were compared; treatment with the chelating agents resulted in lower ash content, conductivity and minerals, higher fibre fractions, carbon, hydrogen and nitrogen. The microbial and chemical changes in the materials after treatment with the two chelators and water were compared. Blending peat with the heat-treated materials at a ratio of 1:1 resulted in improved physical properties. The casings prepared from the test materials and the control, consisting of 100% peat, were compared after neutralising with lime for their productivity in a mushroom yield trial. As expected, the compost bags cased with the control were the most productive compared to the other casings. Of the three treated materials, casing prepared from SMS treated with EDTA blended with peat was the most productive. Dry matter of harvested mushrooms from chelated-SMS casings was significantly higher than the control casing. Comparison of the main components of peat and chelated SMS revealed that the major differences were in the proportions of ash, lipid, lignin and fibre fractions. The stability of some of these components, when complexed with metal cations present in lime may play an important role in determining the composition of the cell wall in fruiting bodies leading to high dry matter content. Received: 19 November 1998 / Received revision: 29 March 1999 / Accepted: 6 April 1999     

Properties of peat-based casing soils and their influence on the water relations and growth of the mushroom (Agaricus bisporus)

Different combinations of peat and chalk or lime sources with differing moisture contents were used to determine how specific physical and chemical properties of the casing soil relate to the growth and water relations of the mushroom. The peat types varied in terms of decomposition and extraction method; the lime addition varied in terms of rate and type (chalk or sugar beet lime). During the colonisation of the casing soil before fruiting, the extension growth rate of mushroom mycelium was most closely correlated (negatively) with the volumetric moisture content of the casing soil. Scanning electron microscopy showed that mycelium growing at a lower casing soil matric potential (Ψ_m) had a much finer and branched structure than mycelium growing at a higher Ψ_m. Across all the peat and lime source treatments, a relationship was found between the mean Ψ_m of the casing soil and mushroom yield, with an optimum Ψ_m of -7.9 to -9.4 kPa. Mushrooms are produced in ‘flushes’ at about 8-day intervals and during the development of each flush of mushrooms, there was a significant decrease in casing soil Ψ_m . This decrease (to below -40 kPa) was greatest in the second flush, which was the highest yielding. There were no relationships between mushroom yield and casing soil osmotic potential Ψ_π within the range -93 to -154 kPa or any of the other chemical properties and water and air holding characteristics of the casing soils which were determined. Across different casing soil treatments, mushroom dry matter content was negatively correlated with mushroom yield and positively correlated with mushroom tissue osmotic potential. This revised version was published online in June 2006 with corrections to the Cover Date.     

Using tea waste as a new casing material in mushroom (Agaricus bisporus (L.) Sing.) cultivation

In this study, the possibility of using tea production waste as a new casing material in mushroom (Agaricus bisporus) cultivation was investigated. Some physical and chemical characteristics of tea waste, fermented tea waste and a mixture of tea waste with peat were compared with that of peat casing, as were their effects on yield. The highest yield was obtained from peat casing. Using tea production waste alone as a casing was not acceptable for assured yield when it was compared with peat. But, a mixture of tea production waste with peat in 1:1 (v:v) ratio increased the yield. There was no significant difference between the mushroom yields of tea production waste+peat and peat casing materials at the end of 30 and 40 days. High salt content, organic and inorganic compounds in casing materials caused reduction of yields. However, a high iron content in casing material gave a significant positive correlation with total yield at 40 days.     

Composted grape marc as growing medium for hypostases (Hypostases phyllostagya)

The use of composted grape marc (CGM) as a plant growth medium was investigated with Hypostases (Hypostases phyllostagya). Seven media were prepared using CGM mixed, in different ratios, with native peat and perlite. The following mixtures were used: 100% CGM, 75% CGM + 25% peat, 50% CGM + 50% perlite, 25% CGM + 75% peat, 50% CGM + 25%) peat + 25% perlite, 25%, CGM + 50%, peat + 25% perlite and 100% peat. The experiment was arranged in a randomized plot design with four replicates under greenhouse conditions. After a growing period of three months, some horticultural parameters were measured. Besides, some physical and chemical properties of the growing medium were determined. The mixtures of 50% CGM + 50% peat, 25% CGM + 75% peat and 100% peat were found to be most suitable based on the horticultural parameters. This was confirmed through the physical characteristics. Up to 50% composted grape marc can be used in mixtures with peat on account of its low cost and high nutrient content.     

Influences of compost and casing layer depths on the mechanical properties of mushrooms

The mushroom growing bed consists of an underlying compost which is covered with casing (a peat and chalk or lime mixture) to induce fruit-body formation. The influences of the depths of the compost and casing layers on the mushroom texture, susceptibility to bruising, and ease of detachment from the growing bed surface were investigated. Textural properties were determined on cubes of cap tissue and detachment torque was determined by using an instrumented rotating suction cup which was lowered on to the caps. The proportion of mushrooms which detached at the base from the bed surface was recorded, since this is an important parameter for an automatic (robotic) harvesting system. Shallow casing resulted in mushrooms that were firmer and less likely to deform plastically, but that showed greater discolouration after a standard bruising treatment. Shallower casing also increased the proportion of mushrooms that detached at the base. Increasing the depth of compost produced firmer mushrooms, significantly increased the detachment torque and reduced the proportion of mushrooms detached at the base. The proportion of mushrooms that detached at the base correlated negatively with the plastic deformation of cap tissue. A positive correlation was found between mushroom dry matter content and tissue firmness.     

Incidence,identification and pathogenicity of Cladobotryum mycophilum,causal agent of cobweb disease on Agaricus bisporus mushroom crops in Spain

Between 2008 and 2011, outbreaks of cobweb were observed in commercial white button mushroom (Agaricus bisporus) crops in Castilla‐La Mancha (Spain). In the last 3 years, the presence of the disease has notably increased resulting in serious economic losses. Based on morphological and genetic analyses, the casual agent of cobweb was identified as Cladobotryum mycophilum. A. bisporus mushroom crops were surveyed over a 2‐year period to estimate the incidence of cobweb. The presence of the disease was detected in 32% of the mushroom crops observed, being of particular concern in autumn (44% of crops infected) and winter (37%). As regards the casing material, the percentage of crops affected by cobweb was 34% in crops using mineral casing and 29% in those cased with a peat‐based casing, with no statistical relationship between the casing and the presence of cobweb. Two cropping trials inoculated with C. mycophilum were set up to evaluate the pathogenicity of the causal agent of cobweb in three peat‐based casings (C1, C2 and C3). The effect of cobweb on mushroom productivity was evaluated by comparing mushroom production and the cobweb patches detected in the casing soil. The decrease in total yield of mushrooms attributed to cobweb reached 12.9% with C2, and the crop area colonised by cobweb reached a final percentage of 36% with C3.     

Evaluating the addition of activated carbon to heat-treated mushroom casing for grain-based and compost-based substrates

Two substrates, a non-composted grain spawn substrate and a traditional composted substrate, each covered with peat-based casing that contained varying amounts of activated carbon (AC) and each receiving different heat-treatment durations, were tested for Agaricus bisporus mushroom production. The amounts of AC were 0, 5, 10, 15, and 20% v/v, and the heat treatments were 0, 60, and 180 min at 121 °C and 103.4 kPa. Overall, the addition of AC up to 10–15% of casing for a grain spawn substrate increased mushroom yield. However, the addition of AC to the casing for compost substrates had no significant effect on yield, whereas heat-treating the casing increased yield. The onset of fruiting was retarded in grain spawn treatments not receiving AC with heat-treatment durations of 60 and 180 min, whereas this effect was not as apparent for the compost substrates. On average, mushroom yield was greater for the grain spawn substrate (366 g) than for compost substrate (287 g). For grain spawn substrate, the results show that the addition of AC ranging from 5% to 10% was adequate for maximum mushroom production.     

Bacteria Antagonistic to Pseudomonas tolaasii and their Control of Brown Blotch of the Cultivated Mushroom Agaricus bisporus

S ummary : Pseudomonas tolaasii was isolated from casing peat of healthy and diseased mushroom beds, compost of diseased mushroom beds and from soils round a mushroom farm. It was not isolated from fresh peat or compost from healthy mushroom beds. Three bacteria antagonistic to Ps. tolaasii were isolated from soil and peat. These were a nonfluorescent Pseudomonas sp. (closest to Ps. multivorans ) from soil; and strains of Ps. fluorescens and Enterobacter aerogenes from peat. When the antagonists and the pathogen were added in the ratio of 8 × 10⁷: 10⁶ cells/ml to unsterilized peat and applied to mushroom trays, infection of mushroom sporophores by the pathogen was effectively controlled. In vitro studies failed to show lysis or growth inhibition of Ps. tolaasii by the antagonists.     

Characterization,feasibility and optimization of Agaricus subrufescens growth based on chemical elements on casing layer

The aim of this study was to analyze yields, biological efficiency, earliness (expressed as days to first harvest), and precociousness and establish models for the mushroom growing according to these parameters. The experiment followed a double factorial design with four sources of calcium (calcitic limestone, calcitic limestone + gypsum, dolomitic limestone and dolomitic limestone + gypsum) and 2 application times (25 days before casing and at the moment of casing), with 4 replicates for each treatment. Different calcium sources influenced differently Agaricus subrufescens production, especially as regards earliness, which showed significantly higher values when dolomitic limestone with gypsum was applied. Yield and biological efficiency were negatively correlated with H + AL, organic matter and Mg amount. Furthermore, earliness was positively correlated with H + Al, organic matter, and the amount of Mg and Fe. Finally, negative correlations were observed between precociousness and the amount of Ca, SB (sum of base), CEC (cation exchange capacity) and V% (percentage of base saturation). The models presented in this work are extremely important for predicting the agronomic performance of Agaricus subrufescens on the basis of chemical analysis provided by the casing soil.     

Pseudomonas tolaasi in Mushroom Crops: A Note on Primary and Secondary Sources of the Bacterium on a Commercial Farm in England

Primary sources of Pseudomonas tolaasi Paine on a mushroom farm were the peat and limestone used in the casing process. The pathogen could not be detected in the farm soil, water supply, the mushroom spawn used, or in compost after spawning, but was isolated from the casing (peat/limestone mixture) layer of symptom-free mushroom beds and both the casing layer and compost of beds bearing diseased mushrooms. Secondary sources were numerous once the pathogen was present in mushroom beds. These included symptomless and diseased mushrooms, the fingers and shoes of people handling the crop, their baskets, knives and ladders. Ps. tolaasi could be isolated from dust in the air in infected houses and also from floors. Spores of infected mushrooms may transport the bacterium, as did sciarid flies and mites which are common pests of mushroom crops.     

Pseudomonas tolaasii in mushroom (Agaricus bisporus) crops: activity of formulations of 2-bromo-2-nitropropane-1,3-diol (bronopol) against the bacterium and the use of this compound to control blotch disease

The bactericidal activity of 2-bromo-2-nitropropane-1,3-diol (bronopol) against Pseudomonas tolaasii , the causative organism of mushroom bacterial blotch, is enhanced by the addition of Tween 80, EDTA and phenylethanol. Results of tests with this pseudomonad confirm that bronopol is more active in alkaline solutions and enhancement of the bactericidal activity of this compound can be obtained by adding calcium carbonate, or mushroom casing (limestone and peat). Quantitative observations show that sterility can be achieved with bronopol at 100 µg/ml in 24 h following artificial inoculation of casing with Ps. tolaasii in glass flasks. On miniature mushroom beds in controlled environments a single application of bronopol, in tap water during routine watering, controls bacterial blotch disease. Bronopol is a slow-acting bactericide, destroying Ps. tolaasii in mushroom casing and effecting control of bacterial blotch disease.     

Composted Green Waste as a Substitute for Peat in Growth Media: Effects on Growth and Nutrition of Calathea insignis

Peat mined from endangered wetland ecosystems is generally used as a component in soilless potting media in horticulture but is a costly and non-renewable natural resource. The objective of this work was to study the feasibility of replacing peat with different percentages (0, 10, 30, 50, 70, 90, and 100%) of composted green waste (CGW) as growth media for the production of the ornamental plant Calathea insignis. Compared with 100% peat media, media containing CGW had improved physical and chemical characteristics to achieve the acceptable ranges. Moreover, CGW addition had increased the stability (i.e., reduced the decomposition rates) of growth media mixtures, as indicated by comparison of particle-size distribution at the start and end of a 7-month greenhouse experiment. Addition of CGW also supported increased plant growth (biomass production, root morphology, nutrient contents, and photosynthetic pigment contents). The physical and chemical characteristics of growth media and plant growth were best with a medium containing 70% CGW and were better in a medium with 100% CGW than in one with 100% peat media. These results indicate that CGW is a viable alternative to peat for the cultivation of Calathea insignis.     

Profile of the extracellular lignocellulolytic enzymes activities as a tool to select the promising strains of Volvariella volvacea (Bull. ex Fr.) sing

Out of 26 strains of Volvariella volvacea used, 18 were of ‘typical’ type and possessed all the characteristics of a normal V. volvacea mycelium, while the rest 4 ‘atypical’ type strains showed completely distinct mycelial growth characteristics. The remaining 4 strains grew very slowly and exhibited growth characteristics of single spore isolates of V. volvacea. Strains varied in their extracellular lignocellulolytic activities and strains; OE-274, OE-272 and OE-210 with high ligninase enzymes (laccase and polyphenol oxidase) activities, gave highest mushroom yield on pasteurized paddy straw substrate. On the composted paddy straw substrate, additional two strains, OE-213 and OE-215 with lower activities of ligninases also gave higher mushroom yield. Mushrooms were harvested 3 to 4 d early from the composted substrate than on the pasteurized substrate. Activities of endoglucanase, laccase and polyphenol oxidase were found to be more crucial for mushroom yield on pasteurized substrate, while xylanase and β-glucosidase were more important for composted substrate. Strains also varied in their fruiting bodies quality and the substrate used for mushroom cultivation also affected the fruiting body quality. The superior yielding strains varied in shape, size, weight, colour and contents of sodium and potassium in their fruiting bodies; while contents of carbon, calcium and protein did not vary much with the strains.     

Primordia initiation of mushroom (Agaricus bisporus) strains on axenic casing materials

The mushroom (Agaricus bisporus) has a requirement for a "casing layer" that has specific physical, chemical and microbiological properties which stimulate and promote the initiation of primordia. Some of these primordia then may develop further into sporophores, involving differentiation of tissue. Wild and commercial strains of A. bisporus were cultured in axenic and nonaxenic microcosms, using a rye grain substrate covered by a range of organic and inorganic casing materials. In axenic culture, A. bisporus (commercial strain A15) was capable of producing primordia and mature sporophores on charcoal (wood and activated), anthracite coal, lignite and zeolite, but not on bark, coir, peat, rockwool, silica or vermiculite. Of six strains tested, only the developmental variant mutant, B430, produced rudimentary primordia on axenic peat-based casing material. However, none of these rudimentary primordia developed differentiated tissues or beyond 4 mm diameter, either on axenic casing material in the microcosms or in larger-scale culture. In larger-scale, nonaxenic culture, strain B430 produced severely malformed but mature sporophores in similar numbers to those of other strains. Typically, 3-6% of primordia developed into mature sporophores, but significant differences in this proportion, as well as in the numbers of primordia produced, were recorded between 12 A. bisporus strains.     

The effect of addition of different amounts and types of organic materials on soil physical properties and yield of wheat

A field experiment was conducted to investigate the influences of 0, 5, 10, 15 Mg ha^–1 of wheat (Triticum aestivum) straw, composted sugarcane bagasse residue and farmyard manure on soil physical properties and yield of winter wheat. The experimental design was a split plot with four replicates. The considered physical properties, 1 year after organic matter addition, included aggregate stability, infiltration rate, water retention curve and dry bulk density. Wheat yield and chemical characteristics of wheat grains were measured. Application of organic materials significantly increased wheat yield and increased aggregate stability, infiltration rate, water retained at less than –100 kPa, and decreased soil bulk density. The effectiveness of different organic materials, farmyard manure, composted bagasse and wheat straw, on improving the soil physical properties was similar. Wheat grain and stubble yield progressively increased as the rate of the organic materials increased. The effectiveness of composted bagasse, farmyard manure and wheat straw on improving wheat grain yield was 22, 14 and 3%, and wheat stubble yield was 26, 17 and 4% over the control.     

Evaluation of indigenous potent mushroom growth promoting bacteria (MGPB) on Agaricus bisporus production

Mushrooms such as Agaricus bisporus, are cultivated for food worldwide. Fruit body initiation in Agaricus bisporus is a phase change from the vegetative to the reproductive stage which depends on the presence of a casing layer with particular physical, chemical and microbiological properties. The phase change is achieved practically by environmental manipulation and the presence of naturally occurring bacteria such as Pseuodomonas putida. In this study, 274 individual bacterial isolates were collected by screening the casing layer of 14 edible mushroom farms. The isolates were analysed with respect to biochemical properties, organic and inorganic phosphate solubilization, production of siderophore and growth in the presence of volatile compound of 1-octen-3-ol. It was found that approximately 97% of the strains were able to grow in the presence of 1-octen-3-ol and 36% were able to solubilize phosphorus. Among the isolates, 23 strains were selected as potent mushroom growth promoting bacteria (MGPB) for inoculation of the casing layer. Field experiments using these strains showed various promoting effects on production of mushroom. Finally, 2 strains (strains Bt4 and Ps7) showing the highest increase in A. bisporus production, were characterized as Pseuodomonas putida by molecular methods and identified as the best suited growth promoting inoculants for application in production farms for increasing the mushroom yield.     

Development of floating rafts after the rewetting of cut-over bogs: the importance of peat quality

The usual method of restoring cut-over bogs is to rewet the peat surface, but this often leads to the remaining peat layers being deeply inundated. For Sphagnum-dominated vegetation to develop at deeply inundated locations, it is important for floating rafts of buoyant residual peat to develop. In this study, the chemical and physical characteristics of buoyant and inundated peat collected from rewetted cut-over bog were compared. In general, buoyant peat was poorly humified; high methane (CH₄) production rates (2 µmol g ^–1 DW day ^–1) were important to ensure buoyancy. Although the peat water CH₄ concentrations increased with depth, the CH₄ production rates were higher in the uppermost peat layers. High CH₄ production rates were related positively with P concentrations and negatively with lignin concentrations. The pH to bulk density ratio (0.05) also appeared to be a good indicator of CH₄ production rates, providing an easy and cheap way to measure the variable for restoration practitioners. Our results indicated that analysing certain simple characteristics of the residual peat can greatly improve the success of the rewetting measures taken in cut-over bogs. If the analysis reveals that the residual peat is unsuitable for floating raft formation, deep inundation is inappropriate unless suitable peat from other locations can be introduced.     

Physiologic response of Agaricus subrufescens using different casing materials and practices applied in the cultivation of Agaricus bisporus

Casing materials and practices used in the cultivation of Agaricus bisporus were evaluated in the cultivation of Agaricus subrufescens, using the best techniques for optimization of production, including the possibility of re-casing of the compost for the production of a second crop of mushroom. Casing based on peat moss, loam soil or coir was compared to casing material mixed with or without spawn-run compost. Based on the results, we conclude that the casing layer used in the cultivation of A. subrufescens should not necessarily be the same as that used in the cultivation of A. bisporus. For the tested strain cultivated with loam soil as casing layer, the ruffling technique is highly superior to CACing and should be pursued in further research. The re-casing of compost in new cycles showed good results suggesting that the currently used compost could be improved.     

Adaptabilidad de cepas brasileñas de Agaricus subrufescens Peck a la fructificación sobre diferentes capas de cobertura en cultivo comercial

BackgroundAgaricus subrufescens Peck is a mushroom whose cultivation has aroused great interest worldwide in recent years, and is becoming increasingly popular. A rapid expansion of culture throughout the world is foreseen because of its medicinal and culinary properties.AimsThis work assesses the effect of 5 different casing layers on the production of 3 strains of Agaricus subrufescens.MethodsA growth cycle of Agaricus subrufescens under controlled conditions has been carried out. The main production parameters were evaluated.ResultsThe best results were provided by the ABL 99/30 strain. Peat-based casings have a better yield than those based on mineral soil. The highest yield (6.75 kg/m², biological efficiency 27.57 kg/dt) was provided by the combination ABL 99/30-Euroveen.ConclusionsOur results suggest that the combination of the strain ABL 99/30 using a peat-based casing layer (Euroveen) offers a high potential for use on a commercial scale by the edible mushroom production sector. The availability of alternatives to the usually cultivated species can make better use of resources, and increase the profitability of this activity.     

不同覆土基质微生物结构特征研究及其对双孢蘑菇产量的影响

覆土是影响双孢蘑菇产量、质量和出菇整齐度的重要因子,利用现代分子生态学的方法快速、准确地对不同覆土基质微生物结构特征进行检测,以进一步了解微生物群落与双孢蘑菇相互作用关系。测定了不同覆土的理化特性,应用PCR技术对不同覆土材料提取总DNA,扩增细菌16S rDNA和真菌28S rDNA,运用变性梯度凝胶电泳技术对PCR产物进行分析,研究双孢蘑菇不同覆土基质微生物结构特征。结果表明：不同处理的覆土材料微生物群落的基因具有多样性,其中细菌群落基因多样性存在差异,使用纯泥炭与粉碎稻草处理差异最大,相似性仅为62%;通过真菌28S rDNA变性梯度凝胶电泳结果显示,粉碎稻草处理多样性指数最高,达3.576,但随着泥炭比例的提高,覆土处理中真菌群落的多样性相对减少;栽培试验发现,双孢蘑菇子实体形成量、总产量可能与覆土中的真菌群落多样性呈负相关。