Impurities and staining characteristics of Alcian Blue samples

Synopsis The composition of various samples of Alcian Blue^* and related dyes was studied, using t.l.c. (with cellulose as adsorbent andn-butanol: acetic acid: water as developing solvent), solvent extraction and precipitation, i.r. spectroscopy and classical semimicro analysis. All the Alcian Blue samples appeared to contain the same coloured components. The Alcian Green samples were mixtures of these blue components and Alcian Yellow. All the Astra Blue samples examined were composed of the same blue constituents. Colourless components identified were boricacid, dextrin and sulphate and sometimes amounted to nearly three-quarters by weight of the crude dyes. Impurities had only a slight effect on staining with Alcian Blue in aqueous acetic acid but appreciably affected staining by the critical electrolyte concentration (C.E.C.) procedure. Dextrin as impurity raised C.E.C. limits while the inorganic salt impurities raised the C.E.C. values of some substrates and lowered those of others.     

Investigations of dye binding in the sequential staining of mucosaccharides by Alcian Yellow-Alcian Blue. II. Spot tests and experiments on dye-mucopolysaccharide (glycosaminoglycan) precipitates

Synopsis The amounts of dye bound to mucopolysaccharide in the histochemical sequential staining Alcian Yellow-Alcian Blue method were determined by studying dye-mucopolysaccharide (glycosaminoglycan) precipitates in test-tube and spot test experiments. In the second step (Alcian Blue) of the method, previously bound Alcian Yellow was released into the staining solution and simultaneously the precipitate took up Alcian Blue. The amounts of Alcian Yellow released and Alcian Blue taken up varied for different mucosaccharides, and depended on the staining time of the second step (Alcian Blue) of the sequence, as well as on the concentration of dye and salt in the Alcian Blue solution. It is thought that, among other things, the Alcian Blue in solution displaces some of the bound Alcian Yellow. Some observations could be explained by the aggregation of dye molecules. The results were in agreement with previous histochemical observations.     

High-resolution preparative separation of glycosaminoglycan oligosaccharides by polyacrylamide gel electrophoresis

Separation of milligram amounts of heparin oligosaccharides ranging in degree of polymerization from 4 to 32 is achieved within 6 h using continuous elution polyacrylamide gel electrophoresis (CE-PAGE) on commercially available equipment. The purity and structural integrity of CE-PAGE-separated oligosaccharides are confirmed by strong anion exchange high-pressure liquid chromatography, electrospray ionization Fourier transform mass spectrometry, and two-dimensional nuclear magnetic resonance spectroscopy. The described method is straightforward and time-efficient, affording size-homogeneous oligosaccharides that can be used in sequencing, protein binding, and other structure-function relationship studies.     

The Alcian Blue and combined Alcian Blue-Safranin O staining of glycosaminoglycans studied in a model system and in mast cells

Synopsis Polyacrylamide films containing different glycosaminoglycans have been applied to the study of the Alcian Blue and combined Alcian Blue-Safranin O staining procedures. It was found that the polyacrylamide matrix can be interpreted as some kind of barrier around the substrate molecules, a situation which can be compared to a certain extent with what occursin situ, where complex protein molecules can likewise form a barrier.The Alcian Blue staining of the model films was found to follow the Lambert-Beer law. The time to reach optimal dye binding depended on the concentration of the glycosaminoglycan enclosed in the model films and on the concentration of Alcian Blue in the dye solution. Lowering the pH of the dye solution appeared to increase the rate of staining. Optimal staining of model films in the presence of salt or urea was not possible, because under these conditions the pores of the polyacrylamide matrix became blocked. Alcian Blue was found to bind irreversibly to the glycosaminoglycan molecules enclosed in the polyacrylamide films.The results of the combined Alcian Blue-Safranin O staining applied to model films appeared to be highly dependent on the amount of Alcian Blue bound to the glycosaminoglycan in the first step of the double staining procedure. No specific differences were noticed between the behaviour of the different glycosaminoglycan-Alcian Blue complexes towards the Safranin O binding in the mext step. As the theoretical basis for the application of the combined Alcian Blue-Safranin O staining was also found not to be completely valid, the conclusion was reached that this double staining cannot be used for the histochemical identification of glycosaminoglycans. The colour retained by a certain glycosaminoglycan-containing part of the specimen only delivers information about the accesibility of that part for Alcian Blue.     

Alcian Blue staining of cartilage for electron microscopy. Application of the critical electrolyte concentation principle.

The critical electrolyte concentration principle was applied to the Alcian Blue staining of rat epiphyseal cartilage proteoglycans for electron microscopy. The distribution and structure of material in glutaraldehyde-fixed cartilage stained at pH 5.8 without MgCl2 and in the presence of 0.05, 0.4, 0.5, 0.9 and 1.0 M MgCl2 was compared with that produced by simultaneous staining and fixation at neutral pH. Both methods resulted in staining of intracellular material within vacuoles as well as staining of non-collagenous matrix material. The structure and distribution of Alcian Blue-positive matrix material consisted of rounded or polygonal granules which accumulated around cells in the proliferative and hypertrophied zones. A similar pattern of distribution was observed in samples stained in the presence of 0.4 or 0.5 M MgCl2. In these cases, however, the stained material exhibited a ribbon-like configuration and granules were few in number. Increasing the MgCl2 concentration to 1.0 M resulted in a marked reduction of Alcian Blue stained material. No ribbon-like structures were observed, and matrix granules were reduced in both number and size. The decreased staining associated with increased electrolyte concentration lends support to the concept that epiphyseal cartilage matrix granules are composed primarily of chondroitin sulphate, and suggest that this same material is present in vacuoles associated with the Golgi apparatus in chondrocytes of the proliferative and hypertrophying zones.     

Alcian Blue staining of glycosaminoglycans in embryonic material: Effect of different fixatives

Summary Glycosaminoglycans are important components of the extracellular matrix of developing embryos where they are found in the form of proteoglycans. Alcian Blue staining of tissue sections is the technique most commonly used for demonstrating their distribution. Glycosaminoglycans have a high solubility in water, and are easily lost from the tissue during processing, even if non-aqueous fixatives have been used. Formalin and Carnoy's fluid are the most frequently used fixatives, and the addition of cetyl pyridinium chloride has been recommended to reduce glycan solubility.Using sections of day-10 rat embryos containing developing head and heart (both known to be rich in glycosaminoglycans) the effects of ten fixatives have been investigated with and without cetyl pyridinium chloride on the preservation of Alcian Blue-stainable material (at pH 2.5) and tissue structure. The most useful fixatives were Karnovsky's and Sainte-Marie's. Both gave a strong and reproducible staining pattern of the extracellular polyanionic material. Sainte-Marie's gave better preservation of tissue structure, allowing the demonstration of cell-matrix inter-relationships; Karnovsky's gave a better contrast between extracellular and intracellular staining, which is particularly useful at lower magnifications.Cetyl pyridinium chloride is a detergent. Transmission electron microscope observations showed that it causes cell membrane disruption and vesicle formation, which at the light microscopic level, would cause cell membrane-associated glycosaminoglycans to appear as stained strands wholly within the extracellular domain. Therefore the use of cetyl pyridinium chloride is inadvisable where a distinction between surface-related and extracellular glycosaminoglycans is desirable. It has the further disadvantage of enhancing cytoplasmic and nuclear polyanionic material, thus decreasing the differential staining intensity of intracellular and extracellular domains.     

The effect of pH on Alcian Blue staining of epithelial acid glycoproteins. II. Human bronchial submucosal gland

Synopsis The effect of pH on Alcian Blue staining of sialomucins and sulphomucins in human bronchial submucosal glands has been analysed. Using Alcian Blue combined with periodic acid-Schiff, lowering the pH was associated with a decrease in the area staining with Alcian Blue and an increase in that staining with periodic acid-Schiff, save in one bronchus with a large sulphomucin content, in which an increase in the area staining with Alcian Blue was found at pH1.0. In all bronchi, an increase in the intensity of Alcian Blue staining was found at this pH. Sialomucin sensitive to sialidase was found to lose Alcian Blue staining at a higher pH than sialomucin resistant to the enzyme. Some sulphomucins stained with Alcian Blue throughout the pH range studied and some only at the more acid pH levels. At pH1.0 Alcian Blue stained only sulphomucins, thus distinguishing them from sialomucins. Alcian Blue staining combined with the high iron diamine technique has enabled three sulphate groups to be identified: one stained with high iron diamine, the other two did not, and, of the latter, one stained with Alcian Blue at pH 2.6 and1.0, and the other only at pH1.0.     

Alcian Blue Pyridine Variant-a Superior Alternative to Alcian Blue 8GX: Staining Performance and Stability

We compared the staining performance, dye content, solubility, and visual absorption maximum of two batches of alcian blue pyridine variant and of five batches of alcian blue 8GX (C.I. 74240). Whenever possible, we also compared results to those obtained with the same dye batches produced at an earlier date to provide information concerning dye stability. Both alcian blue pyridine variant batches were of high dye content, stable, of satisfactory solubility, and performed well in both the routine Mowry mucin stain and in the critical electrolyte concentration (CEC) stain. Of the five alcian blue 8GX samples, some were also of appropriate dye content, were sufficiently stable, and gave good staining in the two procedures. Two batches, however, were unstable, and three batches were unsatisfactory in staining performance and solubility in the CEC stain. Consequently alcian blue pyridine variant is a superior substitute for alcian blue 8GX.     

Correlation between Alcian Blue staining of glycosaminoglycans of cat nucleus pulposus and TEM X-ray probe microanalysis

Synopsis The nucleus pulposus of cat intervertebral disc was examined after staining glycosaminoglycans with Alcian Blue and the results correlated with TEM X-ray probe microanalysis. In unstained sections a difference in copper levels between tissues and resin was detected. In tissue stained with Alcian blue before embedding, the copper levels were slightly increased and the morphological appearance of the intercellular material was amorphous. In sections restained after cutting, the relative levels of copper in the resin were considerably increased and tissue levels were significantly higher than in the resin. Moreover, the morphology of the intercellular material was altered from a rather amorphous material to a network. Sulphur levels behaved in similar manner to copper levels but any correlation between the elements was due to factors unrelated to glycosaminoglycan staining and probably resulted from contaminating sulphur.