10 nm RecA protein filaments formed in the presence of Mg2+ and ATP gamma S may contain RNA

Summary Filaments formed by the polymerization of RecA protein along DNA in the presence of Mg²⁺ and adenosine 5-0-(3-thiotriphosphate) (ATPS) are seen by electron microscopy to have a 10 nm diameter with a 9 nm helical repeat. When certain preparations of apparently pure RecA protein are incubated with Mg²⁺ and ATPS in the absence of nucleic acid for extended times, very long filaments with the same 10 nm diameter and 9 nm axial repeat are seen. We show here that these long 10 nm filaments can contain RNA which is present as a contaminant of the RecA protein and poly(A) which is synthesized during the incubations by an activity that is apparently polynucleotide phosphorylase. RecA protein purified by a procedure developed in this laboratory did not contain RNA and did not form these very long 10 nm filaments. However, when exogenous RNA was added to this protein, 10 nm filament formation was observed.     

The uvsX protein of bacteriophage T4 arranges single-stranded and double-stranded DNA into similar helical nucleoprotein filaments

The bacteriophage T4 uvsX gene codes for a DNA-binding protein that is important for genetic recombination in T4-infected cells. This protein is a DNA-dependent ATPase that resembles the Escherichia coli recA protein in many of its properties. We have examined the binding of purified uvsX protein to single-stranded DNA (ssDNA) and to double-stranded DNA (dsDNA) using electron microscopy to visualize the complexes that are formed and double label analysis to measure their protein content. We find that the uvsX protein binds cooperatively to dsDNA, forming filaments 14 nm in diameter with an apparently helical axial repeat of 12 nm. Each repeat contains about 42 base pairs and 9-12 uvsX protein monomers. In solutions containing Mg2+, the uvsX protein also binds cooperatively to ssDNA. The filaments that result are 14 nm in diameter, show a 12-nm axial repeat, and they are nearly identical in appearance to the filaments that contain dsDNA. In the filaments formed along ssDNA, each axial repeat contains about 49 DNA bases and 9-12 uvsX monomers. Both the filaments formed on the ssDNA and dsDNA show a strong tendency to align side-by-side. T4 gene 32 protein also binds cooperatively to ssDNA and interacts both physically and functionally with uvsX protein. However, when gene 32 and uvsX proteins were added to ssDNA together, no interaction between the two proteins was detected.     

Inhibition of RecA protein function by the RdgC protein from Escherichia coli

The Escherichia coli RdgC protein is a potential negative regulator of RecA function. RdgC inhibits RecA protein-promoted DNA strand exchange, ATPase activity, and RecA-dependent LexA cleavage. The primary mechanism of RdgC inhibition appears to involve a simple competition for DNA binding sites, especially on duplex DNA. The capacity of RecA to compete with RdgC is improved by the DinI protein. RdgC protein can inhibit DNA strand exchange catalyzed by RecA nucleoprotein filaments formed on single-stranded DNA by binding to the homologous duplex DNA and thereby blocking access to that DNA by the RecA nucleoprotein filaments. RdgC protein binds to single-stranded and double-stranded DNA, and the protein can be visualized on DNA using electron microscopy. RdgC protein exists in solution as a mixture of oligomeric states in equilibrium, most likely as monomers, dimers, and tetramers. This concentration-dependent change of state appears to affect its mode of binding to DNA and its capacity to inhibit RecA. The various species differ in their capacity to inhibit RecA function.     

The meiosis-specific recombinase hDmc1 forms ring structures and interacts with hRad51

Eukaryotic cells encode two homologs of Escherichia coli RecA protein, Rad51 and Dmc1, which are required for meiotic recombination. Rad51, like E.coli RecA, forms helical nucleoprotein filaments that promote joint molecule and heteroduplex DNA formation. Electron microscopy reveals that the human meiosis-specific recombinase Dmc1 forms ring structures that bind single-stranded (ss) and double-stranded (ds) DNA. The protein binds preferentially to ssDNA tails and gaps in duplex DNA. hDmc1-ssDNA complexes exhibit an irregular, often compacted structure, and promote strand-transfer reactions with homologous duplex DNA. hDmc1 binds duplex DNA with reduced affinity to form nucleoprotein complexes. In contrast to helical RecA/Rad51 filaments, however, Dmc1 filaments are composed of a linear array of stacked protein rings. Consistent with the requirement for two recombinases in meiotic recombination, hDmc1 interacts directly with hRad51.     

RecA protein-promoted homologous pairing between duplex molecules: functional role of duplex regions of gapped duplex DNA

RecA protein promotes homologous pairing and symmetrical strand exchange between partially single-stranded duplex DNA and fully duplex molecules. We constructed circular gapped DNA with a defined gap length and studied the pairing reaction between the gapped substrate and fully duplex DNA. RecA protein polymerizes onto the single-stranded and duplex regions of the gapped DNA to form a nucleoprotein filament. The formation of such filaments requires a stoichiometric amount of RecA protein. Both the rate and yield of joint molecule formation were reduced when the pairing reaction was carried out in the presence of a sub-saturating amount of RecA protein. The amount of RecA protein required for optimal pairing corresponds to the binding site size of RecA protein at saturation on duplex DNA. The result suggests that in the 4-stranded system the single-stranded as well as the duplex regions are involved in pairing. By using fully duplex DNA that shares different lengths and regions of homology with the gapped molecule, we directly showed that the duplex region of the gapped DNA increased both the rate and yield of joint molecule formation. The present study indicates that even though strand exchange in the 4-stranded system must require the presence of a single-stranded region, the pairing that occurs in duplex regions between DNA molecules is functionally significant and contributes to the overall activity of the gapped DNA.     

Absorption and fluorescence studies of the binding of the recA gene product from E. coli to single-stranded and double-stranded DNA. Ionic strength dependence

The binding of the recA gene product from E. coli to double-stranded and single-stranded nucleic acids has been investigated by following the change in melting temperature of duplex DNA and the fluorescence of single-stranded DNA or poly(dA) modified by reaction with chloroacetaldehyde. At low ionic strength, in the absence of Mg2+ ions, RecA protein binds preferentially to duplex DNA or poly(dA-dT). This leads to an increase of the DNA melting temperature. Stabilization of duplex DNA decreases when ionic strength or pH increases. In the presence of Mg2+ ions, preferential binding to single-stranded polynucleotides is observed. Precipitation occurs when duplex DNA begins to melt in the presence of RecA protein. From competition experiments, different single-stranded and double-stranded polydeoxynucleotides can be ranked according to their ability to bind RecA protein. Structural changes induced in nucleic acids upon RecA binding are discussed together with conformational changes induced in RecA protein upon magnesium binding.     

The Escherichia coli DinD protein modulates RecA activity by inhibiting postsynaptic RecA filaments

Escherichia coli dinD is an SOS gene up-regulated in response to DNA damage. We find that the purified DinD protein is a novel inhibitor of RecA-mediated DNA strand exchange activities. Most modulators of RecA protein activity act by controlling the amount of RecA protein bound to single-stranded DNA by affecting either the loading of RecA protein onto DNA or the disassembly of RecA nucleoprotein filaments bound to single-stranded DNA. The DinD protein, however, acts postsynaptically to inhibit RecA during an on-going DNA strand exchange, likely through the disassembly of RecA filaments. DinD protein does not affect RecA single-stranded DNA filaments but efficiently disassembles RecA when bound to two or more DNA strands, effectively halting RecA-mediated branch migration. By utilizing a nonspecific duplex DNA-binding protein, YebG, we show that the DinD effect is not simply due to duplex DNA sequestration. We present a model suggesting that the negative effects of DinD protein are targeted to a specific conformational state of the RecA protein and discuss the potential role of DinD protein in the regulation of recombinational DNA repair.     

Purification and characterization of the human Rad51 protein, an analogue of E. coli RecA.

In bacteria, genetic recombination is catalysed by RecA protein, the product of the recA gene. A human gene that shares homology with Escherichia coli recA (and its yeast homologue RAD51) has been cloned from a testis cDNA library, and its 37 kDa product (hRad51) purified to homogeneity. The human Rad51 protein binds to single- and double-stranded DNA and exhibits DNA-dependent ATPase activity. Using a topological assay, we demonstrate that hRad51 underwinds duplex DNA, in a reaction dependent upon the presence of ATP or its non-hydrolysable analogue ATP gamma S. Complexes formed with single- and double-stranded DNA have been observed by electron microscopy following negative staining. With nicked duplex DNA, hRad51 forms helical nucleoprotein filaments which exhibit the striated appearance characteristic of RecA or yeast Rad51 filaments. Contour length measurements indicate that the DNA is underwound and extended within the nucleoprotein complex. In contrast to yeast Rad51 protein, human Rad51 forms filaments with single-stranded DNA in the presence of ATP/ATP gamma S. These resemble the inactive form of the RecA filament which is observed in the absence of a nucleotide cofactor.     

By searching processively RecA protein pairs DNA molecules that share a limited stretch of homology

RecA protein promotes homologous pairing by a reaction in which the protein first binds stoichiometrically to single-stranded DNA in a slow presyn-aptic step, and then conjoins single-stranded and duplex DNA, thereby forming a ternary complex. RecA protein did not pair molecules that shared only 30 bp homology, but, with full efficiency, it paired circular single-stranded and linear duplex molecules in which homology was limited to 151 bp at one end of the duplex DNA. The initial rate of the pairing reaction was directly related to the length of the heterologous part of the duplex DNA, which we varied from 0 to 3060 base pairs. Since interactions involving the heterologous part of a molecule speed the location of a small homologous region, we conclude that RecA protein promotes homologous alignment by a processive mechanism involving relative motion of conjoined molecules within the ternary complex.     

Visualization of recA protein and its association with DNA: a priming effect of single-strand-binding protein

A stoichiometric interaction of RecA protein with single-stranded DNA promotes homologous pairing of the single strand with duplex DNA and subsequent polar formation of a heteroduplex joint. Escherichia coli single-strand-binding (SSB) protein augments these reactions. Electron microscopic observations suggest structural bases for these interactions. Without triphosphates or DNA, RecA protein forms short linear filaments. With added circular single-stranded DNA, it forms extended circular filaments as well as collapsed and aggregated complexes of protein and DNA. The extended circular filaments are stiff and regular in appearance, contrasting with the convoluted structure formed by SSB protein and single-stranded DNA. Together, these two proteins form mixed filaments, which mostly resemble the extended structures containing RecA protein; moreover, SSB protein accelerates formation of extended filaments more than 50-fold, increasing the yield of these structures at the expense of heterogeneous aggregates. Other observations further define the interactions of RecA protein with partially single-stranded DNA, and the effects of ATP gamma S on the tendency of RecA protein to form polymeric structures even in the absence of DNA.     

Roles of Bacillus subtilis DprA and SsbA in RecA-mediated Genetic Recombination

Bacillus subtilis competence-induced RecA, SsbA, SsbB, and DprA are required to internalize and to recombine single-stranded (ss) DNA with homologous resident duplex. RecA, in the ATP·Mg²⁺-bound form (RecA·ATP), can nucleate and form filament onto ssDNA but is inactive to catalyze DNA recombination. We report that SsbA or SsbB bound to ssDNA blocks the RecA filament formation and fails to activate recombination. DprA facilitates RecA filamentation; however, the filaments cannot engage in DNA recombination. When ssDNA was preincubated with SsbA, but not SsbB, DprA was able to activate DNA strand exchange dependent on RecA·ATP. This work demonstrates that RecA·ATP, in concert with SsbA and DprA, catalyzes DNA strand exchange, and SsbB is an accessory factor in the reaction. In contrast, RecA·dATP efficiently catalyzes strand exchange even in the absence of single-stranded binding proteins or DprA, and addition of the accessory factors marginally improved it. We proposed that the RecA-bound nucleotide (ATP and to a lesser extent dATP) might dictate the requirement for accessory factors.     

RNA-DNA hybridization promoted by E. coli RecA protein.

RecA protein of E. coli plays a central regulatory role that is induced by damage to DNA and results in the inactivation of LexA repressor. In vitro, RecA protein binds preferentially to single-stranded DNA to form a nucleoprotein filament that can recognize homology in naked duplex DNA and promote extensive strand exchange. Although RecA protein shows little tendency at neutral pH to bind to RNA, we found that it nonetheless catalyzed at 37 degrees C the hybridization of complementary RNA and single-stranded DNA sequences. Hybrids made by RecA protein at 37 degrees C appeared indistinguishable from ones prepared by thermal annealing. RNA-DNA hybridization by RecA protein at neutral pH required, as does RecA-promoted homologous pairing, optimal conditions for the formation of RecA nucleoprotein filaments. The cosedimentation of RNA with those filaments further paralleled observations made on the formation of networks of nucleoprotein filaments with double-stranded DNA, an instrumental intermediate in homologous pairing in vitro. These similarities with the pairing reaction support the view that RecA protein acts specifically in the hybridization reaction.     

RecA protein filaments disassemble in the 5' to 3' direction on single-stranded DNA

RecA protein forms filaments on both single- and double-stranded DNA. Several studies confirm that filament extension occurs in the 5' to 3' direction on single-stranded DNA. These filaments also disassemble in an end-dependent fashion, and several indirect observations suggest that the disassembly occurs on the end opposite to that at which assembly occurs. By labeling the 5' end of single-stranded DNA with a segment of duplex DNA, we demonstrate unambiguously that RecA filaments disassemble uniquely in the 5' to 3' direction.     

Fibers of RecA protein and complexes of RecA protein and single-stranded phi X174 DNA as visualized by negative-stain electron microscopy

Monomers of purified RecA protein polymerize into helical fibers whose pitch is 7.2 nm to 7.5 nm and whose diameter is 11 nm. Either short (approximately 0.2 micron), single fibers, or bundles of aligned, longer fibers, can be formed preferentially, by varying the Mg2+ concentration. When RecA protein is bound to circular, single-stranded phi X174 DNA it forms helical fibers of different classes of contour lengths, ranging from 0.98 micron, depending upon the conditions of assembly. Two different helical pitches are found, one of 9.3 nm when the incubation buffer contains, besides the obligatory Mg2+, either ATP gamma S or ATP accompanied by single-strand binding protein, and one of 5.5 nm when the latter additives are omitted. Preformed fibers of the compact type can be converted to open ones of 9.3 nm pitch upon addition of ATP gamma S, even after the removal of unbound RecA. All signs of helicity are obliterated upon glutaraldehyde cross-linking except in those fibers whose assembly has been mediated by ATP gamma S. RecA protein and single-strand binding protein are competitively bound to single-stranded DNA. Composite complexes, however, are not encountered unless ATP gamma S is present. Otherwise, segments of DNA that are coated by one or the other protein are seen as separate regions. When the assembly of complexes of single-stranded DNA and RecA is mediated by single-strand binding protein and ATP, the axial separation between successive bases is 0 X 42 nm, somewhat greater than the axial distance between bases in one strand of duplex DNA in the B form. It is proposed that the bases of the single-stranded DNA in the complex are located near its inner surface, and that base-pairing with double-stranded DNA takes place following invasion of the central cavity of the complex.     

The RecB Nuclease Domain Binds to RecA-DNA Filaments: Implications for Filament Loading

The E. coli RecBCD enzyme facilitates the loading of RecA onto single-stranded DNA produced by the combined helicase/nuclease activity of RecBCD. The nuclease domain of RecB protein, RecB^nuc, has been previously shown to bind RecA. Surprisingly, RecB^nuc also binds to phage and eukaryotic homologs of RecA, leading to the suggestion that RecB^nuc interacts with the polymerization motif that is present in all three proteins. This mode of interaction could only be with monomeric RecA, as this motif would be buried in filaments. We show that RecB^nuc binds extensively to the outside of RecA-DNA filaments. Three-dimensional reconstructions suggest that RecB^nuc binds to the ATP-binding core of RecA, with a displacement of the C-terminal domain of RecA. Solution experiments confirm that the interaction of RecB^nuc is only with the RecA core. Since the RecA C-terminal domain has been shown to be regulatory, the interaction observed may be part of the loading mechanism where RecB displaces the RecA C-terminal domain and activates a RecA monomer for polymerization.     

Homologous pairing and topological linkage of DNA molecules by combined action of E. coli recA protein and topoisomerase I

E. coil RecA protein and topolsomerase I, acting on superhelical DNA and circular single strands in the presence of ATP and Mg²⁺, topologically link single-stranded molecules to one another, and single-stranded molecules to duplex DNA. When super-helical DNA is relaxed by prior incubation with topoisomerase, it is a poor substrate for catenation. Extensive homology stimulates the catenation of circular single-stranded DNA and superhelical DNA, whereas little reaction occurs between these forms of the closely related DNAs of phages φX174 and G4, indicating that, in conjunction with topoisomerase I, RecA protein can discriminate perfect or nearly perfect homology from a high degree of relatedness. Circular single-stranded G4 DNA reacts with superhelical DNA of a chimeric phage, M13Goril, to form catenanes, at least half of which survive heating at 80°C following restriction cleavage in the M13 region, but few of which survive following restriction cleavage in the G4 region. Electron microscopic examination of catenated molecules cleaved in the M13 region reveals that in most cases the single-stranded G4 DNA is joined to the linear duplex M13(G4) DNA in the homologous G4 region. The junction frequently has the appearance of a D loop, with an extent equivalent to 100 or more bp. We conclude that a significant fraction of catenanes were hemicatenanes, in which the single-stranded circle was topologically linked, probably by multiple turns, to its complementary strand in the duplex DNA. These observations support the previous conclusion that RecA protein can pair a single strand with its complementary strand in duplex DNA in a side-by-side fashion without a free end in any of the three strands.     

RecA Protein from the extremely radioresistant bacterium Deinococcus radiodurans: expression, purification, and characterization

The RecA protein of Deinococcus radiodurans (RecA(Dr)) is essential for the extreme radiation resistance of this organism. The RecA(Dr) protein has been cloned and expressed in Escherichia coli and purified from this host. In some respects, the RecA(Dr) protein and the E. coli RecA (RecA(Ec)) proteins are close functional homologues. RecA(Dr) forms filaments on single-stranded DNA (ssDNA) that are similar to those formed by the RecA(Ec). The RecA(Dr) protein hydrolyzes ATP and dATP and promotes DNA strand exchange reactions. DNA strand exchange is greatly facilitated by the E. coli SSB protein. As is the case with the E. coli RecA protein, the use of dATP as a cofactor permits more facile displacement of bound SSB protein from ssDNA. However, there are important differences as well. The RecA(Dr) protein promotes ATP- and dATP-dependent reactions with distinctly different pH profiles. Although dATP is hydrolyzed at approximately the same rate at pHs 7.5 and 8.1, dATP supports an efficient DNA strand exchange only at pH 8.1. At both pHs, ATP supports efficient DNA strand exchange through heterologous insertions but dATP does not. Thus, dATP enhances the binding of RecA(Dr) protein to ssDNA and the displacement of ssDNA binding protein, but the hydrolysis of dATP is poorly coupled to DNA strand exchange. The RecA(Dr) protein thus may offer new insights into the role of ATP hydrolysis in the DNA strand exchange reactions promoted by the bacterial RecA proteins. In addition, the RecA(Dr) protein binds much better to duplex DNA than the RecA(Ec) protein, binding preferentially to double-stranded DNA (dsDNA) even when ssDNA is present in the solutions. This may be of significance in the pathways for dsDNA break repair in Deinococcus.     

Unwinding of heterologous DNA by RecA protein during the search for homologous sequences.

The search for homologous sequences promoted by RecA protein in vitro involves a presynaptic filament and naked duplex DNA, the multiple contacts of which produce nucleoprotein networks or coaggregates. The single-stranded DNA within the presynaptic filaments, however, is extended to an axial spacing 1.5 times that of B-form DNA. To investigate this paradoxical difference between the spacing of bases in the RecA presynaptic filament versus the target duplex DNA, we explored the effect of heterologous contacts on the conformation of DNA, and vice versa. In the presence of wheat germ topoisomerase I, RecA presynaptic filaments induced a rapid, limited reduction in the linking number of heterologous circular duplex DNA. This limited unwinding of heterologous duplex DNA, termed heterologous unwinding, was detected within 30 seconds and reached a steady state within a few minutes. Presynaptic filaments that were formed in the presence of ATP gamma S and separated from free RecA protein by gel filtration also generated a ladder of topoisomers upon incubation with relaxed duplex DNA and topoisomerase. The inhibition of heterologous contacts by 60 mM-NaCl or 5 mM-ADP resulted in a corresponding decrease in heterologous unwinding. In reciprocal fashion, the stability or number of heterologous contacts with presynaptic filaments was inversely related to the linking number of circular duplex DNA. These observations show that heterologous contacts with the presynaptic filament cause a limited unwinding of the duplex DNA, and conversely that the ability of the DNA to unwind stabilizes transient heterologous contacts.     

Homologous pairing in duplex DNA regions and the formation of four-stranded paranemic joints promoted by RecA protein. Effects of gap length and negative superhelicity

RecA protein catalyzes homologous pairing of partially single-stranded duplex DNA and fully duplex DNA to form stable joint molecules. We constructed circular duplex DNA with various defined gap lengths and studied the pairing reaction between the gapped substrate with fully double-stranded DNA. The reaction required a stoichiometric amount of RecA protein, and the optimal reaction was achieved at a ratio of 1 RecA monomer per 4 base pairs. The length of the gap, ranging from 141 to 1158 nucleotides, had little effect on the efficiency of homologous pairing. By using a circular gapped duplex DNA prepared from the chimeric phage M13Gori1, we were able to show the formation of nonintertwined or paranemic joints in duplex regions between the gapped and fully duplex molecules. The formation of such paranemic joints occurred efficiently and included nearly all of the DNA in the reaction mixture. The reaction required negative superhelicity, and pairing was greatly reduced with linear or nicked circular DNA. We conclude that one functional role of the single-stranded gap is for facilitating the binding of RecA protein to the duplex region of the gapped DNA. Once the nucleoprotein filament is formed, homologous pairing between the gapped and fully duplex DNA can take place anywhere along the length of the nucleoprotein complex.     

A RecA filament capping mechanism for RecX protein

The RecX protein is a potent inhibitor of RecA protein activities. RecX functions by specifically blocking the extension of RecA filaments. In vitro, this leads to a net disassembly of RecA protein from circular single-stranded DNA. Based on multiple observations, we propose that RecX has a RecA filament capping activity. This activity has predictable effects on the formation and disassembly of RecA filaments. In vivo, the RecX protein may limit the length of RecA filaments formed during recombinational DNA repair and other activities. RecX protein interacts directly with RecA protein, but appears to interact in a functionally significant manner only with RecA filaments bound to DNA.