Development of Chromosome-specific Cytogenetic Markers and Merging of Linkage Fragments in Papaya

Carica papaya L. is a tropical and sub-tropical fruit-tree crop with a small genome and nine pairs of chromosomes. The transgenic cultivar ‘SunUp’ has been sequenced and three high-density genetic maps are available for mapping agronomically and economically-important traits. However, the small size and similar morphology of papaya chromosomes hinder their identification and few cytological resources are available for integration of genetic and cytogenetic information. Fluorescence in situ hybridization (FISH) was performed on mitotic metaphase chromosomes using BAC clones harboring mapped simple sequence repeat (SSR) markers as probes. A total of 104 BAC clones covering all 12 linkage groups (LGs) were tested and 12 of them, that gave a single specific signal, were chosen as representative of the 12 LGs of the SSR genetic map. This set of chromosome-specific DNA markers acted as a foundation for papaya chromosome karyotyping and re-assigning orientation of LGs. Chromosome-specific markers allowed us to assign the minor LGs 10, 11, and 12 to major LGs 8, 9, and 7, respectively. We thus reduced the number of LGs in the genetic map to nine, corresponding to the haploid number of papaya chromosomes. We also tested the relative order of DNA markers on minor LGs 10 and 11 to place them on top of LGs 8 and 9 in the correct orientation. Ribosomal DNAs (rDNAs), a set of major cytogenetic markers, were positioned on specific papaya chromosomes. The 25S rDNA showed strong signals at the constriction site of a single pair of chromosomes identified as LG 2 by LG 2-specific BAC clone. The 5S rDNA showed strong signals on two pairs of chromosomes that are syntenic with LG 4- and LG 5-specific BAC clones. This integrated map will facilitate genome assembly, quantitative trait locus (QTL) mapping, and the study of cytological, physical and genetic distance relationships between papaya chromosomes.     

Assignment of zebrafish genetic linkage groups to chromosomes

In this report the zebrafish genetic linkage groups are assigned to specific chromosomes using fluorescence in situ hybridization (FISH) with BAC probes containing genes mapped to each linkage group (LG). Chromosomes were identified using a combination of relative size and arm ratios. The largest genetic maps generally corresponded to the largest chromosomes, but genetic recombination tended to be elevated in the smaller chromosomes and near telomeres. Large insert clones containing genes near telomeres often hybridized to telomeres of multiple chromosome pairs, suggesting the presence of shared subtelomeric repetitive DNAs near telomeres. Evidence from comparative gene mapping in medaka, zebrafish, pufferfish, and humans suggests that the linkage groups of these species have the content of duplicate proto-chromosomes. However, these duplicate linkage groups are not associated with chromosomes of similar size or morphology. This suggests that considerable chromosome restructuring occurred subsequent to the genome duplication in teleosts.     

An Integrated Genetic and Cytogenetic Map for Zhikong Scallop,Chlamys farreri,Based on Microsatellite Markers

The reliability of genome analysis and proficiency of genetic manipulation requires knowledge of the correspondence between the genetic and cytogenetic maps. In the present study, we integrated cytogenetic and microsatellite-based linkage maps for Zhikong scallop, Chlamys farreri. Thirty-eight marker-anchored BAC clones standing for the 19 linkage groups were used to be FISH probes. Of 38 BAC clones, 30 were successfully located on single chromosome by FISH and used to integrate the genetic and cytogenetic map. Among the 19 linkage groups, 12 linkage groups were physically anchored by 2 markers, 6 linkage groups were anchored by 1 marker, and one linkage group was not anchored any makers by FISH. In addition, using two-color FISH, six linkage groups were distinguished by different chromosomal location; linkage groups LG6 and LG16 were placed on chromosome 10, LG8 and LG18 on chromosome 14. As a result, 18 of 19 linkage groups were localized to 17 pairs of chromosomes of C. farreri. We first integrated genetic and cytogenetic map for C. farreri. These 30 chromosome specific BAC clones in the cytogenetic map could be used to identify chromosomes of C. farreri. The integrated map will greatly facilitate molecular genetic studies that will be helpful for breeding applications in C. farreri and the upcoming genome projects of this species.     

Assignment of rainbow trout linkage groups to specific chromosomes

The rainbow trout genetic linkage groups have been assigned to specific chromosomes in the OSU (2N=60) strain using fluorescence in situ hybridization (FISH) with BAC probes containing genes mapped to each linkage group. There was a rough correlation between chromosome size and size of the genetic linkage map in centimorgans for the genetic maps based on recombination from the female parent. Chromosome size and structure have a major impact on the female:male recombination ratio, which is much higher (up to 10:1 near the centromeres) on the larger metacentric chromosomes compared to smaller acrocentric chromosomes. Eighty percent of the BAC clones containing duplicate genes mapped to a single chromosomal location, suggesting that diploidization resulted in substantial divergence of intergenic regions. The BAC clones that hybridized to both duplicate loci were usually located in the distal portion of the chromosome. Duplicate genes were almost always found at a similar location on the chromosome arm of two different chromosome pairs, suggesting that most of the chromosome rearrangements following tetraploidization were centric fusions and did not involve homeologous chromosomes. The set of BACs compiled for this research will be especially useful in construction of genome maps and identification of QTL for important traits in other salmonid fishes.     

High-Density Genetic Linkage Mapping in Turbot (Scophthalmus maximus L.) Based on SNP Markers and Major Sex- and Growth-Related Regions Detection

This paper describes the development of a high density consensus genetic linkage map of a turbot (Scophthalmus maximus L.) family composed of 149 mapping individuals using Single Nucleotide Polymorphisms (SNP) developed using the restriction-site associated DNA (RAD) sequencing technique with the restriction enzyme, PstI. A total of 6,647 SNPs were assigned to 22 linkage groups, which is equal to the number of chromosome pairs in turbot. For the first time, the average marker interval reached 0.3958 cM, which is equal to approximately 0.1203 Mb of the turbot genome. The observed 99.34% genome coverage indicates that the linkage map was genome-wide. A total of 220 Quantitative Traits Locus (QTLs) associated with two body length traits, two body weight traits in different growth periods and sex determination were detected with an LOD > 5.0 in 12 linkage groups (LGs), which explained the corresponding phenotypic variance (R²), ranging from 14.4–100%. Among them, 175 overlapped with linked SNPs, and the remaining 45 were located in regions between contiguous SNPs. According to the QTLs related to growth trait distribution and the changing of LGs during different growth periods, the growth traits are likely controlled by multi-SNPs distributed on several LGs; the effect of these SNPs changed during different growth periods. Most sex-related QTLs were detected at LG 21 with a linkage span of 70.882 cM. Additionally, a small number of QTLs with high feasibility and a narrow R² distribution were also observed on LG7 and LG14, suggesting that multi LGs or chromosomes might be involved in sex determination. High homology was recorded between LG21 in Cynoglossus semilaevis and turbot. This high-saturated turbot RAD-Seq linkage map is undoubtedly a promising platform for marker assisted selection (MAS) and flatfish genomics research.     

Complete assignment of the chromosomes of Gossypium hirsutum L. by translocation and fluorescence in situ hybridization mapping

Significant progress has been made in the construction of genetic maps in the tetraploid cotton Gossypium hirsutum. However, six linkage groups (LGs) have still not been assigned to specific chromosomes, which is a hindrance for integrated genetic map construction. In the present research, specific bacterial artificial chromosome (BAC) clones constructed in G. hirsutum acc. TM-1 for these six LGs were identified by screening the BAC library using linkage group-specific simple-sequence repeats markers. These BAC clones were hybridized to ten translocation heterozygotes of G. hirsutum. L as BAC-fluorescence in situ hybridization probes, which allowed us to assign these six LGs A01, A02, A03, D02, D03, and D08 to chromosomes 13, 8, 11, 21, 24, and 19, respectively. Therefore, the 13 homeologous chromosome pairs have been established, and we have proposed a new chromosome nomenclature for tetraploid cotton.     

Conserved synteny of genes between chromosome 15 of Bombyx mori and a chromosome of Manduca sexta shown by five-color BAC-FISH.

The successful assignment of the existing genetic linkage groups (LGs) to individual chromosomes and the second-generation linkage map obtained by mapping a large number of bacterial artificial chromosome (BAC) contigs in the silkworm, Bombyx mori, together with public nucleotide sequence databases, offer a powerful tool for the study of synteny between karyotypes of B. mori and other lepidopteran species. Conserved synteny of genes between particular chromosomes can be identified by comparatively mapping orthologous genes of the corresponding linkage groups with the help of BAC-FISH (fluorescent in situ hybridization). This technique was established in B. mori for 2 differently labeled BAC probes simultaneously hybridized to pachytene bivalents. To achieve higher-throughput comparative mapping using BAC-FISH in Lepidoptera, we developed a protocol for five-color BAC-FISH, which allowed us to map simultaneously 6 different BAC probes to chromosome 15 in B. mori. We identified orthologs of 6 B. mori LG15 genes (RpP0, RpS8, eIF3, RpL7A, RpS23, and Hsc70) for the tobacco hornworm, Manduca sexta, and selected the ortholog-containing BAC clones from an M. sexta BAC library. All 6 M. sexta BAC clones hybridized to a single M. sexta bivalent in pachytene spermatocytes. Thus, we have confirmed the conserved synteny between the B. mori chromosome 15 and the corresponding M. sexta chromosome (hence provisionally termed chromosome 15).     

Assignment of 3 genetic linkage groups to 3 chromosomes of narrow-leafed lupin

The legume genus, Lupinus, has many notable properties that make it interesting from a scientific perspective, including its basal position in the evolution of Papilionoid legumes. As the most economically important legume species, L. angustifolius L. (narrow-leafed lupin) has been subjected to much genetic analysis including linkage mapping and genomic library development. Cytogenetic analysis has been hindered by the large number of small morphologically uniform chromosomes (2n = 40). Here, we present a significant advance: the development of chromosome-specific cytogenetic markers and assignment of the first genetic linkage groups (LGs) to chromosomal maps of L. angustifolius using the bacterial artificial chromosome (BAC)-fluorescence in situ hybridization approach. Twelve clones produced single-locus signals that "landed" on 7 different chromosomes. Based on BAC-end sequences of those clones, genetic markers were generated. Eight clones localized on 3 chromosomes, allowed these chromosomes to be assigned to 3 LGs. An additional single-locus clone may be useful to combine an unassigned group (Cluster-2) with main LGs. This work provides a strong foundation for future identification of all chromosomes with specific markers and for complete integration of narrow-leafed lupin LGs. This resource will greatly facilitate the chromosome assignment and ordering of sequence contigs in sequencing the L. angustifolius genome.     

Integrated karyotyping of sorghum by in situ hybridization of landed BACs.

The reliability of genome analysis and proficiency of genetic manipulation are increased by assignment of linkage groups to specific chromosomes, placement of centromeres, and orientation with respect to telomeres. We have endeavored to establish means to enable these steps in sorghum (Sorghum bicolor (L.) Moench), the genome of which contains ca. 780 Mbp spread across n = 10 chromosomes. Our approach relies on fluorescence in situ hybridization (FISH) and integrated structural genomic resources, including large-insert genomic clones in bacterial artificial chromosome (BAC) libraries. To develop robust FISH probes, we selected sorghum BACs by association with molecular markers that map near the ends of linkage groups, in regions inferred to be high in recombination. Overall, we selected 22 BACs that encompass the 10 linkage groups. As a prelude to development of a multiprobe FISH cocktail, we evaluated BAC-derived probes individually and in small groups. Biotin- and digoxygenin-labeled probes were made directly from the BAC clones and hybridized in situ to chromosomes without using suppressive unlabelled C0t-1 DNA. Based on FISH-signal strength and the relative degree of background signal, we judged 19 BAC-derived probes to be satisfactory. Based on their relative position, and collective association with all 10 linkage groups, we chose 17 of the 19 BACs to develop a 17-locus probe cocktail for dual-color detection. FISH of the cocktail allowed simultaneous identification of all 10 chromosomes. The results indicate that linkage and physical maps of sorghum allow facile selection of BAC clones according to position and FISH-signal quality. This capability will enable development of a high-quality molecular cytogenetic map and an integrated genomics system for sorghum, without need of chromosome flow sorting or microdissection. Moreover, transgeneric FISH experiments suggest that the sorghum system might be applicable to other Gramineae.     

Integration of Linkage and Chromosome Maps of Red Clover ( Trifolium pratense L.)

Red clover (Trifolium pratense L.) is a forage legume and an allogamous diploid plant (2n = 14; 440 Mb). Here, we examine the 7 prometaphase chromosomes of red clover using fluorescence in situ hybridization (FISH) with ribosomal RNA sequences, pericentromeric and telomeric repeats, as well as bacterial artificial chromosome (BAC) clones. Position of hybridization signals and chromosome condensation patterns were quantified by the help of the chromosome image analysis system ver. 4.0 (CHIAS IV). Fourteen BAC clones belonging to linkage groups (LG) 1-7 hybridized to individual chromosomes 4, 2, 6, 5, 1, 7, and 3, respectively. Quantitative analysis of FISH mapping and chromosome analysis using CHIAS IV allowed us to construct a quantitative idiogram that constitutes the comprehensive chromosome map of red clover. Chromosomal positions of the 26S rDNA locus were detected at a heterozygous locus on chromosome 6 in the variety HR, and polymorphisms of rDNA loci were observed in other varieties, although chromosomal positions of some BAC clones did not vary among HR and other varieties. These results demonstrate chromosomal collinearity among allogamous red clover varieties. This integration of genetic linkage and quantitative chromosome maps should provide valuable insight into allogamous legume genetics.     

Linkage analysis and identification of quantitative trait loci associated with freeze tolerance and turf quality traits in St. Augustinegrass

St. Augustinegrass [Stenotaphrum secundatum (Walt.) Kuntze] is a warm-season turfgrass commonly grown in the southern USA. In this study, the first linkage map for all nine haploid chromosomes of the species was constructed for cultivar ‘Raleigh’ and cultivar ‘Seville’ using a pseudo-F₂ mapping strategy. A total of 160 simple sequence repeat markers were mapped to nine linkage groups (LGs) covering a total distance of 1176.24 cM. To demonstrate the usefulness of the map, quantitative trait loci (QTL) were mapped controlling field winter survival, laboratory-based freeze tolerance, and turf quality traits. Multiple genomic regions associated with these traits were identified. Moreover, overlapping QTL were found for winterkill and spring green up on LG 3 (99.21 cM); turf quality, turf density, and leaf texture on LG 3 (68.57–69.50 cM); and surviving green tissue and regrowth on LGs 1 (38.31 cM), 3 (77.70 cM), 6 (49.51 cM), and 9 (34.20 cM). Additional regions, where QTL identified in both field and laboratory-based/controlled environment freeze testing co-located, provided strong support that these regions are good candidates for true gene locations. These results present the first complete linkage map produced for St. Augustinegrass, providing a template for further genetic mapping. Additionally, markers linked to the QTL identified may be useful to breeders for transferring these traits into new breeding lines and cultivars.     

Regulation of Arabidopsis defense responses against Spodoptera littoralis by CPK-mediated calcium signaling

Background

Genetic markers and linkage mapping are basic prerequisites for marker-assisted selection and map-based cloning. In the case of the key grassland species Lolium spp., numerous mapping populations have been developed and characterised for various traits. Although some genetic linkage maps of these populations have been aligned with each other using publicly available DNA markers, the number of common markers among genetic maps is still low, limiting the ability to compare candidate gene and QTL locations across germplasm.

Results

A set of 204 expressed sequence tag (EST)-derived simple sequence repeat (SSR) markers has been assigned to map positions using eight different ryegrass mapping populations. Marker properties of a subset of 64 EST-SSRs were assessed in six to eight individuals of each mapping population and revealed 83% of the markers to be polymorphic in at least one population and an average number of alleles of 4.88. EST-SSR markers polymorphic in multiple populations served as anchor markers and allowed the construction of the first comprehensive consensus map for ryegrass. The integrated map was complemented with 97 SSRs from previously published linkage maps and finally contained 284 EST-derived and genomic SSR markers. The total map length was 742 centiMorgan (cM), ranging for individual chromosomes from 70 cM of linkage group (LG) 6 to 171 cM of LG 2.

Conclusions

The consensus linkage map for ryegrass based on eight mapping populations and constructed using a large set of publicly available Lolium EST-SSRs mapped for the first time together with previously mapped SSR markers will allow for consolidating existing mapping and QTL information in ryegrass. Map and markers presented here will prove to be an asset in the development for both molecular breeding of ryegrass as well as comparative genetics and genomics within grass species.     

Physical and genetic mapping of the rainbow trout major histocompatibility regions: evidence for duplication of the class I region

One of the most unexpected discoveries in MHC genetics came from studies dealing with the teleost MHC. Initially discovered in zebrafish, the MHC class I and II regions of all bony fish are not linked. Previous segregation analysis in trout suggested that the class I and II regions reside on completely different chromosomes. To learn more about MHC genomics in trout, we have isolated BAC clones harboring class Ia and Ib loci, a single BAC clone containing an MH class II gene ( DAB), as well as BAC clones containing the ABCB2 gene. Upon PCR and sequence confirmation, BAC clones were labeled and used as probes for in situ hybridization on rainbow trout metaphase chromosomes for determination of the physical locations of the trout MH regions. Finally, SNPs, RFLPs, and microsatellites found within the BAC clones allowed for these regions to be assigned to specific linkage groups on the OSU x Hotcreek (HC) and OSU x Arlee (ARL) genetic linkage maps. Our data demonstrate that the trout MH regions are located on at least four different chromosomes and the corresponding linkage groups, while also providing direct evidence for the partial duplication of the MH class I region in trout.     

Construction of a sequence-tagged high-density genetic map of papaya for comparative structural and evolutionary genomics in brassicales

A high-density genetic map of papaya (Carica papaya L.) was constructed using microsatellite markers derived from BAC end sequences and whole-genome shot gun sequences. Fifty-four F(2) plants derived from varieties AU9 and SunUp were used for linkage mapping. A total of 707 markers, including 706 microsatellite loci and the morphological marker fruit flesh color, were mapped into nine major and three minor linkage groups. The resulting map spanned 1069.9 cM with an average distance of 1.5 cM between adjacent markers. This sequence-based microsatellite map resolved the very large linkage group 2 (LG 2) of the previous high-density map using amplified fragment length polymorphism markers. The nine major LGs of our map represent papaya's haploid nine chromosomes with LG 1 of the sex chromosome being the largest. This map validates the suppression of recombination at the male-specific region of the Y chromosome (MSY) mapped on LG 1 and at potential centromeric regions of other LGs. Segregation distortion was detected in a large region on LG 1 surrounding the MSY region due to the abortion of the YY genotype and in a region of LG6 due to an unknown cause. This high-density sequence-tagged genetic map is being used to integrate genetic and physical maps and to assign genome sequence scaffolds to papaya chromosomes. It provides a framework for comparative structural and evolutional genomic research in the order Brassicales.     

Construction of a horse BAC library and cytogenetical assignment of 20 type I and type II markers

A horse BAC library was constructed with about 40, 000 clones and mean insert size of 110 kb representing a 1.5 genome equivalent coverage and a probability of finding a single sequence of 0.75. It was characterized by PCR screening of about 130 sequences of horse microsatellites and exonic gene sequences retrieved from databases. BACs containing 8 microsatellites and 12 genes were subsequently localized by fluorescent in situ hybridization (FISH) on chromosomes. Two linkage groups were newly assigned to chromosomes: LG2 to ECA3 and LG5 to ECA24, and five linkage groups were also oriented—LG3, LG4, LG5, LG8, and LG12—leaving only three groups unassigned. This work showed how this library makes an integrated map a realistic objective for the near future and how it can make comparative mapping more efficient in a search for candidate genes of interest. Received: 9 January 1998 / Accepted: 13 April 1998     

A sugar beet (Beta vulgaris L.) reference FISH karyotype for chromosome and chromosome‐arm identification,integration of genetic linkage groups and analysis of major repeat family distribution

We developed a reference karyotype for B. vulgaris which is applicable to all beet cultivars and provides a consistent numbering of chromosomes and genetic linkage groups. Linkage groups of sugar beet were assigned to physical chromosome arms by FISH (fluorescent in situ hybridization) using a set of 18 genetically anchored BAC (bacterial artificial chromosome) markers. Genetic maps of sugar beet were correlated to chromosome arms, and North–South orientation of linkage groups was established. The FISH karyotype provides a technical platform for genome studies and can be applied for numbering and identification of chromosomes in related wild beet species. The discrimination of all nine chromosomes by BAC probes enabled the study of chromosome‐specific distribution of the major repetitive components of sugar beet genome comprising pericentromeric, intercalary and subtelomeric satellites and 18S‐5.8S‐25S and 5S rRNA gene arrays. We developed a multicolor FISH procedure allowing the identification of all nine sugar beet chromosome pairs in a single hybridization using a pool of satellite DNA probes. Fiber‐FISH was applied to analyse five chromosome arms in which the furthermost genetic marker of the linkage group was mapped adjacently to terminal repetitive sequences on pachytene chromosomes. Only on two arms telomere arrays and the markers are physically linked, hence these linkage groups can be considered as terminally closed making the further identification of distal informative markers difficult. The results support genetic mapping by marker localization, the anchoring of contigs and scaffolds for the annotation of the sugar beet genome sequence and the analysis of the chromosomal distribution patterns of major families of repetitive DNA.     

QTL mapping of yield, agronomic and quality traits in tetraploid potato (Solanum tuberosum subsp. tuberosum)

Interval mapping of quantitative trait loci (QTL) for 16 yield, agronomic and quality traits in potato was performed on a tetraploid full-sib family comprising 227 clones from a cross between processing clone 12601ab1 and table cultivar Stirling. Thirty-eight AFLP primer combinations and six SSRs provided 514 informative markers which formed a molecular marker map comprising 12 linkage groups (LGs) in 12601ab1 (nine with four homologous chromosomes) which were aligned with 12 in Stirling (11 with four homologous chromosomes), with four partial groups remaining in 12601ab1. Two LGs were identified unequivocally as chromosomes IV and V and eight others were tentatively assigned with chromosomes VII and X unidentified. All of the traits scored had moderately high heritabilities with 54–92% of the variation in clone means over 3 years and two replicates being due to genetic differences. A total of 39 QTLs were identified. A QTL for maturity was identified on chromosome V which explained 56% of the phenotypic variance, whereas the other QTLs individually explained between 5.4 and 16.5%. However, six QTLs were detected for after-cooking blackening and four for each of regularity of tuber shape, fry colour both after storage at 4 and 10°C and sprouting. Just two QTLs were found for each of yield, the two ‘overall’ scores, crop emergence, tuber size and common scab and just one QTL was detected for each of dry matter content, keeping quality, growth cracks and internal condition. The implications for practical potato breeding and for practical linkage and QTL analysis in autotetraploids are discussed.     

Cotton genome mapping with new microsatellites from Acala ‘Maxxa’ BAC-ends

Fine mapping and positional cloning will eventually improve with the anchoring of additional markers derived from genomic clones such as BACs. From 2,603 new BAC-end genomic sequences from Gossypium hirsutum Acala ‘Maxxa’, 1,316 PCR primer pairs (designated as MUSB) were designed to flank microsatellite or simple sequence repeat motif sequences. Most (1164 or 88%) MUSB primer pairs successfully amplified DNA from three species of cotton with an average of three amplicons per marker and 365 markers (21%) were polymorphic between G. hirsutum and G. barbadense. An interspecific RIL population developed from the above two entries was used to map 433 marker loci and 46 linkage groups with a genetic distance of 2,126.3 cM covering approximately 45% of the cotton genome and an average distance between two loci of 4.9 cM. Based on genome-specific chromosomes identified in G. hirsutum tetraploid (A and D), 56.9% of the coverage was located on the A subgenome while 39.7% was assigned to the D subgenome in the genetic map, suggesting that the A subgenome may be more polymorphic and recombinationally active than originally thought. The linkage groups were assigned to 23 of the 26 chromosomes. This is the first genetic map in which the linkage groups A01 and A02/D03 have been assigned to specific chromosomes. In addition the MUSB-derived markers from BAC-end sequences markers allows fine genetic and QTL mapping of important traits and for the first time provides reconciliation of the genetic and physical maps. Limited QTL analyses suggested that loci on chromosomes 2, 3, 12, 15 and 18 may affect variation in fiber quality traits. The original BAC clones containing the newly mapped MUSB that tag the QTLs provide critical DNA regions for the discovery of gene sequences involved in biological processes such as fiber development and pest resistance in cotton. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

FISH physical mapping with barley BAC clones

Fluorescence in situ hybridization (FISH) is a useful technique for physical mapping of genes, markers, and other single- or low-copy sequences. Since clones containing less than 10 kb of single-copy DNA do not reliably produce detectable signals with current FISH techniques in plants, a bacterial artificial chromosome (BAC) partial library of barley was constructed and a FISH protocol for detecting unique sequences in barley BAC clones was developed. The library has a 95 kb average barley insert, representing about 20% of a barley genome. Two BAC clones containing hordein gene sequences were identified and partially characterized. FISH using these two BAC clones as probes showed specific hybridization signals near the end of the short arm of one pair of chromosomes. Restriction digests of these two BAC clones were compared with restriction patterns of genomic DNA; all fragments contained in the BAC clones corresponded to bands present in the genomic DNA, and the two BAC clones were not identical. The barley inserts contained in these two BAC clones were faithful copies of the genomic DNA. FISH with four BAC clones with inserts varying from 20 to 150 kb, showed distinct signals on paired chromatids. Physical mapping of single- or low-copy sequences in BAC clones by FISH will help to correlate the genetic and physical maps. FISH with BAC clones also provide an additional approach for saturating regions of interest with markers and for constructing contigs spanning those regions.     

Genetic linkage map of the guppy,Poecilia reticulata,and quantitative trait loci analysis of male size and colour variation

We report construction of a genetic linkage map of the guppy genome using 790 single nucleotide polymorphism markers, integrated from six mapping crosses. The markers define 23 linkage groups (LGs), corresponding to the known haploid number of guppy chromosomes. The map, which spans a genetic length of 899 cM, includes 276 markers linked to expressed genes (expressed sequence tag), which have been used to derive broad syntenic relationships of guppy LGs with medaka chromosomes. This combined linkage map should facilitate the advancement of genetic studies for a wide variety of complex adaptive phenotypes relevant to natural and sexual selection in this species. We have used the linkage data to predict quantitative trait loci for a set of variable male traits including size and colour pattern. Contributing loci map to the sex LG for many of these traits.