Segmental isotopic labeling of a 140?kDa dimeric multi-domain protein CheA from Escherichia coli by expressed protein ligation and protein trans-splicing

Segmental isotopic labeling is a powerful labeling tool to facilitate NMR studies of larger proteins by not only alleviating the signal overlap problem but also retaining features of uniform isotopic labeling. Although two approaches, expressed protein ligation (EPL) and protein trans-splicing (PTS), have been mainly used for segmental isotopic labeling, there has been no single example in which both approaches have been directly used with an identical protein. Here we applied both EPL and PTS methods to a 140 kDa dimeric multi-domain protein E. coli CheA, and successfully produced the ligated CheA dimer by both approaches. In EPL approach, extensive optimization of the ligation sites and the conditions were required to obtain sufficient amount for an NMR sample of CheA, because CheA contains a dimer forming domain and it was not possible to achieve high reactant concentrations (1-5 mM) of CheA fragments for the ideal EPL condition, thereby resulting in the low yield of segmentally labelled CheA dimer. PTS approach sufficiently produced segmentally labeled ligated CheA in vivo as well as in vitro without extensive optimizations. This is presumably because CheA has self-contained domains connected with long linkers, accommodating a seven-residue mutation without loss of the function, which was introduced by PTS to achieve the high yield. PTS approach was less laborious than EPL approach for the routine preparation of segmentally-isotope labeled CheA dimer. Both approaches remain to be further developed for facilitating preparations of segmental isotope-labelled samples without extensive optimizations for ligation.     

An efficient on-column expressed protein ligation strategy: application to segmental triple labeling of human apolipoprotein E3

Expressed protein ligation (EPL) is an intein-based approach that has been used for protein engineering and biophysical studies of protein structures. One major problem of the EPL is the low yield of final ligation product, primarily due to the complex procedure of the EPL, preventing EPL from gaining popularity in the research community. Here we report an efficient on-column EPL strategy, which focuses on enhancing the expression level of the intein-fusion protein that generates thioester for the EPL. We applied this EPL strategy to human apolipoprotein E (apoE) and routinely obtained 25-30 mg segmental, triple-labeled apoE from 1-L cell culture. The approaches reported here are general approaches that are not specific for apoE, thus providing a general strategy for a highly efficient EPL. In addition, we also report an isotopic labeling scheme that double-labels one domain and keeps the other domain of apoE deuterated. Such an isotopic labeling scheme can only be achieved using the EPL strategy. Our data indicated that the segmental triple-labeled apoEs using this labeling scheme produced high-quality, simplified NMR spectra, facilitating NMR spectral assignment. For large proteins, such as apoE, perdeuterated protein samples have to be used to reduce the linewidth of NMR signals, causing a major problem for the NOE-based NMR method, since perdeuterated proteins lack protons for NOE measurement. The new labeling strategy solves this problem and provides (13)C/(15)N double-labeled, protonated protein domains, allowing for determination of high-resolution NMR structure of these large proteins.     

An amalgamation of solid phase peptide synthesis and ribosomal peptide synthesis

Expressed protein ligation (EPL) is a protein semisynthesis technique that allows the site-specific introduction of unnatural amino acids and biophysical probes into proteins. In the present study, we illustrate the utility of the approach through the generation of two semisynthetic proteins bearing spectroscopic probes. Dihydrofolate reductase containing a single (13)C probe in an active site loop was generated through the ligation of a synthetic peptide-alpha-thioester to a recombinantly generated fragment containing an N-terminal Cys. Similarly, c-Crk-II was assembled by the sequential ligation of three recombinant polypeptide building blocks, allowing the incorporation of (15)N isotopes in the central domain of the protein. These examples showcase the scope of the protein ligation strategy for selective introduction of isotopic labels into proteins, and the protocols described will be of value to those interested in using EPL on other systems.     

Introduction of unnatural amino acids into proteins using expressed protein ligation

Here we describe the results of studies designed to explore the scope and limitations of expressed protein ligation (EPL), a protein semisynthesis approach that allows unnatural amino acids to be site specifically introduced into large proteins. Using Src homology 3 domains from the proteins c-Abl and c-Crk as model systems, we show here that EPL can be performed in the presence of moderate concentrations of the chemical denaturant, guanidine hydrochloride, and the organic solvent dimethylsulfoxide. Use of these solubilizing agents allowed the successful preparation of two semisynthetic proteins, 10 and 12, both of which could not be prepared using standard procedures due to the low solubility of the synthetic peptide reactants in aqueous buffers. We also report the results of thiolysis and kinetic studies which indicate that stable alkyl thioester derivatives of recombinant proteins can be generated for storage and purification purposes, and that 2-mercaptoethanesulfonic acid compares favorably with thiophenol as the thiol cofactor for EPL reactions, while having superior handling properties. Finally, we describe the semisynthesis of the fluorescein/rhodamine-containing construct (12) and the ketone-containing construct (14). The efficiency of these two syntheses indicates that EPL offers a facile way of incorporating these important types of biophysical and biochemical probes into proteins.     

A generic building block for C- and N-terminal protein-labeling and protein-immobilization

Expressed protein ligation (EPL) and bioconjugation based on the maleimide group (MIC-conjugation) provide powerful tools for protein modification. In the light of the importance of site-selectively modified proteins for the study of protein function, a flexible method for the introduction of tags and reporter groups into the C-terminus of proteins employing EPL and MIC-conjugation was developed. We describe the solid-phase synthesis of a generic building block, equipped with fluorescence markers or different functional groups. This generic building block allows for a flexible incorporation of different tags into proteins and was used for the introduction of fluorescence markers into the C-terminus of Rab and Ras GTPases by EPL or MIC-conjugation techniques. In addition, a building block appropriately modified for the incorporation of an azide into proteins was synthesized. Azide-functionalized Ras protein was immobilized on a phosphane-modified surface by means of Staudinger ligation providing a highly chemoselective ligation method for the immobilization of proteins.     

Multicolor protein labeling in living cells using mutant β-lactamase-tag technology

Protein labeling techniques using small molecule probes have become important as practical alternatives to the use of fluorescent proteins (FPs) in live cell imaging. These labeling techniques can be applied to more sophisticated fluorescence imaging studies such as pulse-chase imaging. Previously, we reported a novel protein labeling system based on the combination of a mutant β-lactamase (BL-tag) with coumarin-derivatized probes and its application to specific protein labeling on cell membranes. In this paper, we demonstrated the broad applicability of our BL-tag technology to live cell imaging by the development of a series of fluorescence labeling probes for this technology, and the examination of the functions of target proteins. These new probes have a fluorescein or rhodamine chromophore, each of which provides enhanced photophysical properties relative to coumarins for the purpose of cellular imaging. These probes were used to specifically label the BL-tag protein and could be used with other small molecule fluorescent probes. Simultaneous labeling using our new probes with another protein labeling technology was found to be effective. In addition, it was also confirmed that this technology has a low interference with respect to the functions of target proteins in comparison to GFP. Highly specific and fast covalent labeling properties of this labeling technology is expected to provide robust tools for investigating protein functions in living cells, and future applications can be improved by combining the BL-tag technology with conventional imaging techniques. The combination of probe synthesis and molecular biology techniques provides the advantages of both techniques and can enable the design of experiments that cannot currently be performed using existing tools.     

Comparative genomic analyses of the bacterial phosphotransferase system.

We report analyses of 202 fully sequenced genomes for homologues of known protein constituents of the bacterial phosphoenolpyruvate-dependent phosphotransferase system (PTS). These included 174 bacterial, 19 archaeal, and 9 eukaryotic genomes. Homologues of PTS proteins were not identified in archaea or eukaryotes, showing that the horizontal transfer of genes encoding PTS proteins has not occurred between the three domains of life. Of the 174 bacterial genomes (136 bacterial species) analyzed, 30 diverse species have no PTS homologues, and 29 species have cytoplasmic PTS phosphoryl transfer protein homologues but lack recognizable PTS permeases. These soluble homologues presumably function in regulation. The remaining 77 species possess all PTS proteins required for the transport and phosphorylation of at least one sugar via the PTS. Up to 3.2% of the genes in a bacterium encode PTS proteins. These homologues were analyzed for family association, range of protein types, domain organization, and organismal distribution. Different strains of a single bacterial species often possess strikingly different complements of PTS proteins. Types of PTS protein domain fusions were analyzed, showing that certain types of domain fusions are common, while others are rare or prohibited. Select PTS proteins were analyzed from different phylogenetic standpoints, showing that PTS protein phylogeny often differs from organismal phylogeny. The results document the frequent gain and loss of PTS protein-encoding genes and suggest that the lateral transfer of these genes within the bacterial domain has played an important role in bacterial evolution. Our studies provide insight into the development of complex multicomponent enzyme systems and lead to predictions regarding the types of protein-protein interactions that promote efficient PTS-mediated phosphoryl transfer.     

Mass spectrometry for the biophysical characterization of therapeutic monoclonal antibodies

Monoclonal antibodies (mAbs) are powerful therapeutics, and their characterization has drawn considerable attention and urgency. Unlike small-molecule drugs (150–600 Da) that have rigid structures, mAbs (∼150 kDa) are engineered proteins that undergo complicated folding and can exist in a number of low-energy structures, posing a challenge for traditional methods in structural biology. Mass spectrometry (MS)-based biophysical characterization approaches can provide structural information, bringing high sensitivity, fast turnaround, and small sample consumption. This review outlines various MS-based strategies for protein biophysical characterization and then reviews how these strategies provide structural information of mAbs at the protein level (intact or top-down approaches), peptide, and residue level (bottom-up approaches), affording information on higher order structure, aggregation, and the nature of antibody complexes.     

Comparative Genomic Analyses of the Bacterial Phosphotransferase System

We report analyses of 202 fully sequenced genomes for homologues of known protein constituents of the bacterial phosphoenolpyruvate-dependent phosphotransferase system (PTS). These included 174 bacterial, 19 archaeal, and 9 eukaryotic genomes. Homologues of PTS proteins were not identified in archaea or eukaryotes, showing that the horizontal transfer of genes encoding PTS proteins has not occurred between the three domains of life. Of the 174 bacterial genomes (136 bacterial species) analyzed, 30 diverse species have no PTS homologues, and 29 species have cytoplasmic PTS phosphoryl transfer protein homologues but lack recognizable PTS permeases. These soluble homologues presumably function in regulation. The remaining 77 species possess all PTS proteins required for the transport and phosphorylation of at least one sugar via the PTS. Up to 3.2% of the genes in a bacterium encode PTS proteins. These homologues were analyzed for family association, range of protein types, domain organization, and organismal distribution. Different strains of a single bacterial species often possess strikingly different complements of PTS proteins. Types of PTS protein domain fusions were analyzed, showing that certain types of domain fusions are common, while others are rare or prohibited. Select PTS proteins were analyzed from different phylogenetic standpoints, showing that PTS protein phylogeny often differs from organismal phylogeny. The results document the frequent gain and loss of PTS protein-encoding genes and suggest that the lateral transfer of these genes within the bacterial domain has played an important role in bacterial evolution. Our studies provide insight into the development of complex multicomponent enzyme systems and lead to predictions regarding the types of protein-protein interactions that promote efficient PTS-mediated phosphoryl transfer.     

Toward the semisynthesis of multidomain transmembrane receptors: modification of Eph tyrosine kinases

Expressed protein ligation (EPL) is a protein engineering approach that allows the modification or assembly of a target protein from multiple recombinant and synthetic polypeptides. EPL has been previously used to modify intracellular proteins and small integral membrane proteins for structural and functional studies. Here we describe the semisynthetic site-specific modification of the complete, multidomain extracellular regions of both A and B classes of Eph receptor tyrosine kinases. We show that the ectodomains of these receptors can be ligated to different peptides under carefully established experimental conditions, while their biological activity is retained. This work extends the boundaries of the EPL technique for semisynthesis of multidomain, extracellular, disulfide-bonded, and glycosylated proteins and highlights its potential application for reconstituting entire single-pass transmembrane proteins.     

Luminescent metal-ligand complexes as probes of macromolecular interactions and biopolymer dynamics

The knowledge of microsecond dynamics is important for an understanding of the mechanism and function of biological systems. Fluorescent techniques are well established in biophysical studies, but their applicability to probe microsecond timescale processes is limited. Luminescent metal-ligand complexes (MLCs) have created interest mainly due to their unique luminescent properties, such as the exceptionally long decay times and large fundamental anisotropy values, allowing examination of microsecond dynamics by fluorescence methods. MLC properties also greatly simplify instrumentation requirements and enable the use of light emitting diode excitation for time-resolved measurements. Recent literature illustrates how MLC labels take full advantage of well developed fluorescence techniques and how those methods can be extended to timescales not easily accessible with nanosecond probes. MLCs are now commercially available as reactive labels which give researchers access to methods that previously required more complex approaches. The present paper gives an overview of the applications of MLC probes to studies of molecular dynamics and interactions of proteins, membranes and nucleic acids.     

Merging fluorescence resonance energy transfer and expressed protein ligation to analyze protein-protein interactions

Determination of protein oligomerization state can be technically challenging. We have combined the methods of expressed protein ligation (EPL) and fluorescence resonance energy transfer (FRET) for the analysis of protein homo-oligomerization states. We have attached fluorescein (donor) and rhodamine (acceptor) chromophores via dipeptide linkages to the C-termini of three recombinant proteins and examined the potential for FRET between mixtures of these semisynthetic proteins. The known protein dimer (glutathione S-transferase) showed evidence of FRET and the known protein monomer (SH2 domain phosphatase-1) did not display FRET. Using this method, the previously uncharacterized circadian rhythm enzyme, serotonin N-acetyltransferase, displayed significant FRET, indicating its likely propensity for dimerization or more complex oligomerization. These results establish the potential of the union of EPL and FRET in the analysis of protein-protein interactions and provide insight into the unusual enzymatic behavior of a key circadian rhythm enzyme.     

Ligation independent cloning vectors for expression of SUMO fusions

With demand increasing for the production of many different proteins for biophysical or biochemical analyses, rapid methods are needed for the cloning, expression and purification of native recombinant proteins. In particular, generic methods are required that are independent of the target gene sequence. To address this challenge we have constructed four Escherichia coli expression vectors that can be used for ligation independent cloning (LIC) of an amplified target gene sequence. These vectors represent the combinatorial pairing of two different parent vector backbones with two different affinity tags. The target gene is cloned downstream of the sequence coding for an affinity-tagged small ubiquitin related modifier (SUMO). Using enhanced green fluorescent protein (eGFP) as an example we demonstrate that the LIC procedure works with high efficiency for all four of the vectors. We also show that the resultant recombinant SUMO fusion proteins can be overexpressed in E. coli and readily isolated by standard affinity purification techniques. Importantly, the purified fusion product can be treated with recombinant SUMO hydrolase to yield a mature target protein with any residue except proline at the amino terminus. We demonstrate an application of this by generating recombinant eGFP containing a non-native amino terminal cysteine residue and using it as a substrate for expressed protein ligation (EPL). The reagents and techniques described here represent a generic method for the rapid cloning and production of a target protein, and would be appropriate for a high throughput genomic scale expression project.     

Expressed protein ligation-mediated template protein extension

Expressed protein ligation (EPL) was performed to investigate sequence requirements for a variant human apolipoprotein A-I (apoA-I) to adopt a folded structure. A C-terminal truncated apoA-I, corresponding to residues 1-172, was expressed and isolated from Escherichia coli. Compared to full length apoA-I (243 amino acids), apoA-I(1-172) displayed less α-helix secondary structure and lower stability in solution. To determine if extension of this polypeptide would confer secondary structure content and/or stability, 20 residues were added to the C-terminus of apoA-I(1-172) by EPL, creating apoA-I(Milano)(1-192). The EPL product displayed biophysical properties similar to full-length apoA-I(Milano). The results provide a general protein engineering strategy to modify the length of a recombinant template polypeptide using synthetic peptides as well as a convenient, cost effective way to investigate the structure/function relations in apolipoprotein fragments or domains of different size.     

Functional similarity between the peroxisomal PTS2 receptor binding protein Pex18p and the N-terminal half of the PTS1 receptor Pex5p

Within the extended receptor cycle of peroxisomal matrix import, the function of the import receptor Pex5p comprises cargo recognition and transport. While the C-terminal half (Pex5p-C) is responsible for PTS1 binding, the contribution of the N-terminal half of Pex5p (Pex5p-N) to the receptor cycle has been less clear. Here we demonstrate, using different techniques, that in Saccharomyces cerevisiae Pex5p-N alone facilitates the import of the major matrix protein Fox1p. This finding suggests that Pex5p-N is sufficient for receptor docking and cargo transport into peroxisomes. Moreover, we found that Pex5p-N can be functionally replaced by Pex18p, one of two auxiliary proteins of the PTS2 import pathway. A chimeric protein consisting of Pex18p (without its Pex7p binding site) fused to Pex5p-C is able to partially restore PTS1 protein import in a PEX5 deletion strain. On the basis of these results, we propose that the auxiliary proteins of the PTS2 import pathway fulfill roles similar to those of the N-terminal half of Pex5p in the PTS1 import pathway.     

SDSL-ESR-based protein structure characterization

As proteins are key molecules in living cells, knowledge about their structure can provide important insights and applications in science, biotechnology, and medicine. However, many protein structures are still a big challenge for existing high-resolution structure-determination methods, as can be seen in the number of protein structures published in the Protein Data Bank. This is especially the case for less-ordered, more hydrophobic and more flexible protein systems. The lack of efficient methods for structure determination calls for urgent development of a new class of biophysical techniques. This work attempts to address this problem with a novel combination of site-directed spin labelling electron spin resonance spectroscopy (SDSL-ESR) and protein structure modelling, which is coupled by restriction of the conformational spaces of the amino acid side chains. Comparison of the application to four different protein systems enables us to generalize the new method and to establish a general procedure for determination of protein structure.     

Rapid identification of proteins by peptide-mass fingerprinting

BACKGROUND: Developments in 'soft' ionisation techniques have revolutionized mass-spectro-metric approaches for the analysis of protein structure. For more than a decade, such techniques have been used, in conjuction with digestion b specific proteases, to produce accurate peptide molecular weight 'fingerprints' of proteins. These fingerprints have commonly been used to screen known proteins, in order to detect errors of translation, to characterize post-translational modifications and to assign diulphide bonds. However, the extent to which peptide-mass information can be used alone to identify unknown sample proteins, independent of other analytical methods such as protein sequence analysis, has remained largely unexplored. RESULTS: We report here on the development of the molecular weight search (MOWSE) peptide-mass database at the SERC Daresbury Laboratory. Practical experience has shown that sample proteins can be uniquely identified from a few as three or four experimentally determined peptide masses when these are screened against a fragment database that is derived from over 50 000 proteins. Experimental errors of a few Daltons are tolerated by the scoring algorithms, thus permitting the use of inexpensive time-of-flight mass spectrometers. As with other types of physical data, such as amino-acid composition or linear sequence, peptide masses provide a set of determinants that are sufficiently discriminating to identify or match unknown sample proteins. CONCLUSION: Peptide-mass fingerprints can prove as discriminating as linear peptide sequences, but can be obtained in a fraction of the time using less protein. In many cases, this allows for a rapid identification of a sample protein before committing it to protein sequence analysis. Fragment masses also provide information, at the protein level, that is complementary to the information provided by large-scale DNA sequencing or mapping projects.     

The structural analysis of protein–protein interactions by NMR spectroscopy

A comprehensive understanding of protein–protein interactions is an important next step in our quest to understand how the information contained in a genome is put into action. Although a number of experimental techniques can report on the existence of a protein– protein interaction, very few can provide detailed structural information. NMR spectroscopy is one of these, and in recent years several complementary NMR approaches, including residual dipolar couplings and the use of paramagnetic effects, have been developed that can provide insight into the structure of protein–protein complexes. In this article, we review these approaches and comment on their strengths and weaknesses.