Crystal Structure and Site-directed Mutational Analysis Reveals Key Residues Involved in Escherichia coli ZapA Function

FtsZ is an essential cell division protein in Escherichia coli, and its localization, filamentation, and bundling at the mid-cell are required for Z-ring stability. Once assembled, the Z-ring recruits a series of proteins that comprise the bacterial divisome. Zaps (FtsZ-associated proteins) stabilize the Z-ring by increasing lateral interactions between individual filaments, bundling FtsZ to provide a scaffold for divisome assembly. The x-ray crystallographic structure of E. coli ZapA was determined, identifying key structural differences from the existing ZapA structure from Pseudomonas aeruginosa, including a charged α-helix on the globular domains of the ZapA tetramer. Key helix residues in E. coli ZapA were modified using site-directed mutagenesis. These ZapA variants significantly decreased FtsZ bundling in protein sedimentation assays when compared with WT ZapA proteins. Electron micrographs of ZapA-bundled FtsZ filaments showed the modified ZapA variants altered the number of FtsZ filaments per bundle. These in vitro results were corroborated in vivo by expressing the ZapA variants in an E. coli ΔzapA strain. In vivo, ZapA variants that altered FtsZ bundling showed an elongated phenotype, indicating improper cell division. Our findings highlight the importance of key ZapA residues that influence the extent of FtsZ bundling and that ultimately affect Z-ring formation in dividing cells.     

FtsZ polymer-bundling by the Escherichia coli ZapA orthologue, YgfE, involves a conformational change in bound GTP

Cell division is a fundamental process for both eukaryotic and prokaryotic cells. In bacteria, cell division is driven by a dynamic, ring-shaped, cytoskeletal element (the Z-ring) made up of polymers of the tubulin-like protein FtsZ. It is thought that lateral associations between FtsZ polymers are important for function of the Z-ring in vivo, and that these interactions are regulated by accessory cell division proteins such as ZipA, EzrA and ZapA. We demonstrate that the putative Escherichia coli ZapA orthologue, YgfE, exists in a dimer/tetramer equilibrium in solution, binds to FtsZ polymers, strongly promotes FtsZ polymer bundling and is a potent inhibitor of the FtsZ GTPase activity. We use linear dichroism, a technique that allows structure analysis of molecules within linear polymers, to reveal a specific conformational change in GTP bound to FtsZ polymers, upon bundling by YgfE. We show that the consequences of FtsZ polymer bundling by YgfE and divalent cations are very similar in terms of GTPase activity, bundle morphology and GTP orientation and therefore propose that this conformational change in bound GTP reveals a general mechanism of FtsZ bundling.     

FtsZ-ZapA-ZapB interactome of Escherichia coli

Bacterial cell division relies on the formation and contraction of the Z ring, coordinated and regulated by a dynamic protein complex called the divisome. The cell division factor ZapA interacts directly with FtsZ and thereby increases FtsZ protofilament association and Z-ring stability. Here, we investigated ZapB interaction with ZapA and its effect on Z-ring formation and FtsZ protofilament bundling. The combination of the ftsZ84 allele that encodes an FtsZ variant that polymerizes inefficiently with a zapB null mutant resulted in a synthetic defective phenotype. Overproduction of ZapA led to the formation of aberrant FtsZ helical structures and delocalization of ZapB. The N-terminal end of ZapB was essential for ZapB-ZapA interaction, and amino acid changes close to the N terminus of ZapB exhibited reduced interaction with ZapA. Sedimentation assays showed that ZapB interacts strongly with ZapA and reduces ZapA's interaction with FtsZ in vitro. The morphology of the structures formed by ZapA and ZapB together was similar to the cables formed by ZapB in the presence of CaCl(2), a known ZapB bundling agent. The in vivo and in vitro data support a model in which ZapA interacts strongly with ZapB and the ZapA-ZapB interaction is favored over ZapA-FtsZ.     

Polymerization and bundling kinetics of FtsZ filaments

FtsZ is a tubulin homolog essential for prokaryotic cell division. In living bacteria, FtsZ forms a ringlike structure (Z-ring) at the cell midpoint. Cell division coincides with a gradual contraction of the Z-ring, although the detailed molecular structure of the Z-ring is unknown. To reveal the structural properties of FtsZ, an understanding of FtsZ filament and bundle formation is needed. We develop a kinetic model that describes the polymerization and bundling mechanism of FtsZ filaments. The model reveals the energetics of the FtsZ filament formation and the bundling energy between filaments. A weak lateral interaction between filaments is predicted by the model. The model is able to fit the in vitro polymerization kinetics data of another researcher, and explains the cooperativity observed in FtsZ kinetics and the critical concentration in different buffer media. The developed model is also applicable for understanding the kinetics and energetics of other bundling biopolymer filaments.     

A new FtsZ-interacting protein, YlmF, complements the activity of FtsA during progression of cell division in Bacillus subtilis

The assembly of ring-like structures, composed of FtsZ proteins (i.e. the Z ring), is the earliest and most essential process in bacterial cytokinesis. It has been shown that this process is directly regulated by the FtsZ-binding proteins, FtsA, ZapA, and EzrA, in Bacillus subtilis. In this study, protein complexes that are involved in Z-ring formation were chemically cross-linked in vivo, purified by affinity chromatography, and analysed by mass spectrometry. Analysis of the results identified YlmF as a new component of the FtsZ complex. Yeast two-hybrid analysis and fluorescence microscopy of YFP-YlmF in B. subtilis cells indicated YlmF localizes to the division site in an FtsZ-dependent manner. A single disruption of YlmF resulted in a slight elongation of cells; however, simultaneous inactivation of both YlmF and FtsA showed synthetic lethality caused by complete blockage of cell division due to the defect in Z-ring formation. In contrast, the ftsA-null mutant phenotype, caused by inefficient Z-ring formation, could be complemented by overexpression of YlmF. These results suggest that YlmF has an overlapping function with FtsA in stimulating the formation of Z rings in B. subtilis.     

Backbone and side chain NMR assignments of <Emphasis Type="Italic">Geobacillus stearothermophilus</Emphasis> ZapA allow identification of residues that mediate the interaction of ZapA with FtsZ

Bacterial division begins with the formation of a contractile protein ring at midcell, which constricts the bacterial envelope to generate two daughter cells. The central component of the division ring is FtsZ, a tubulin-like protein capable of self-assembling into filaments which further associate into a higher order structure known as the Z ring. Proteins that bind to FtsZ play a crucial role in the formation and regulation of the Z ring. One such protein is ZapA, a widely conserved 21 kDa homodimeric protein that associates with FtsZ filaments and promotes their bundling. Although ZapA was discovered more than a decade ago, the structural details of its interaction with FtsZ remain unknown. In this work, backbone and side chain NMR assignments for the Geobacillus stearothermophilus ZapA homodimer are described. We titrated FtsZ into ¹⁵N²H-ZapA and mapped ZapA residues whose resonances are perturbed upon FtsZ binding. This information provides a structural understanding of the interaction between FtsZ and ZapA.     

Lateral FtsZ association and the assembly of the cytokinetic Z ring in bacteria

Cell division in bacteria is facilitated by a polymeric ring structure, the Z ring, composed of tubulin-like FtsZ protofilaments. Recently it has been shown that in Bacillus subtilis , the Z ring forms through the cell cycle-mediated remodelling of a helical FtsZ polymer. To investigate how this occurs in vivo , we have exploited a unique temperature-sensitive strain of B. subtilis expressing the mutant protein FtsZ(Ts1). FtsZ(Ts1) is unable to complete Z ring assembly at 49°C, becoming trapped at an intermediate stage in the helix-to-ring progression. To determine why this is the case, we used a combination of methods to identify the specific defect of the FtsZ(Ts1) protein in vivo . Our results indicate that while FtsZ(Ts1) is able to polymerize normally into protofilaments, it is defective in the ability to support lateral associations between these filaments at high temperatures. This strongly suggests that lateral FtsZ association plays a crucial role in the polymer transitions that lead to the formation of the Z ring in the cell. In addition, we show that the FtsZ-binding protein ZapA, when overproduced, can rescue the FtsZ(Ts1) defect in vivo . This suggests that ZapA functions to promote the helix-to-ring transition of FtsZ by stimulating lateral FtsZ association.     

The rapid onset of elasticity during the assembly of the bacterial cell-division protein FtsZ

FtsZ, a prokaryotic homolog of eukaryotic tubulin, is a major constituent of the bacterial Z-ring, which contracts the cell wall during cell division. Because the mechanical properties of FtsZ are unknown, its function in the maintenance and constriction of the Z-ring is not well understood. Here, quantitative rheometry shows that, at physiological concentrations, FtsZ filaments form, extremely rapidly, highly elastic networks within physiological time scales ( approximately minutes), much faster than other major dynamic cytoskeletal filaments, including microtubule, actin, and vimentin in eukaryotes. FtsZ networks display a relatively low viscosity and a high resilience against shear stresses, as well as an elasticity that depends weakly on concentration, G approximately C(0.57), a power-law dependence consistent with crosslinked flexible filaments. Calcium, whose intracellular concentration increases during bacterial division, further enhances the elasticity of FtsZ networks through filament bundling, an effect that occurs in the presence of GTP, not GDP. These studies suggest that FtsZ filaments have the toughness to provide strong mechanical support for the maintenance and circumferential constriction of the bacterial Z-ring.     

Organization of FtsZ Filaments in the Bacterial Division Ring Measured from Polarized Fluorescence Microscopy

Cytokinesis in bacteria is accomplished by a ring-shaped cell-division complex (the Z-ring). The primary component of the Z-ring is FtsZ, a filamentous tubulin homolog that serves as a scaffold for the recruitment of other cell-division-related proteins. FtsZ forms filaments and bundles. In the cell, it has been suggested that FtsZ filaments form the arcs of the ring and are aligned in the cell-circumferential direction. Using polarized fluorescence microscopy in live Escherichia coli cells, we measure the structural organization of FtsZ filaments in the Z-ring. The data suggest a disordered organization: a substantial portion of FtsZ filaments are aligned in the cell-axis direction. FtsZ organization in the Z-ring also appears to depend on the bacterial species. Taken together, the unique arrangement of FtsZ suggests novel unexplored mechanisms in bacterial cell division.     

Organization of FtsZ Filaments in the Bacterial Division Ring Measured from Polarized Fluorescence Microscopy

Cytokinesis in bacteria is accomplished by a ring-shaped cell-division complex (the Z-ring). The primary component of the Z-ring is FtsZ, a filamentous tubulin homolog that serves as a scaffold for the recruitment of other cell-division-related proteins. FtsZ forms filaments and bundles. In the cell, it has been suggested that FtsZ filaments form the arcs of the ring and are aligned in the cell-circumferential direction. Using polarized fluorescence microscopy in live Escherichia coli cells, we measure the structural organization of FtsZ filaments in the Z-ring. The data suggest a disordered organization: a substantial portion of FtsZ filaments are aligned in the cell-axis direction. FtsZ organization in the Z-ring also appears to depend on the bacterial species. Taken together, the unique arrangement of FtsZ suggests novel unexplored mechanisms in bacterial cell division.     

Identification of Escherichia coli ZapC (YcbW) as a component of the division apparatus that binds and bundles FtsZ polymers

Assembly of the cell division apparatus in bacteria starts with formation of the Z ring on the cytoplasmic face of the membrane. This process involves the accumulation of FtsZ polymers at midcell and their interaction with several FtsZ-binding proteins that collectively organize the polymers into a membrane-associated ring-like configuration. Three such proteins, FtsA, ZipA, and ZapA, have previously been identified in Escherichia coli. FtsA and ZipA are essential membrane-associated division proteins that help connect FtsZ polymers with the inner membrane. ZapA is a cytoplasmic protein that is not required for the fission process per se but contributes to its efficiency, likely by promoting lateral interactions between FtsZ protofilaments. We report the identification of YcbW (ZapC) as a fourth FtsZ-binding component of the Z ring in E. coli. Binding of ZapC promotes lateral interactions between FtsZ polymers and suppresses FtsZ GTPase activity. This and additional evidence indicate that, like ZapA, ZapC is a nonessential Z-ring component that contributes to the efficiency of the division process by stabilizing the polymeric form of FtsZ.     

Essential cell division protein FtsZ assembles into one monomer-thick ribbons under conditions resembling the crowded intracellular environment

Experimental conditions that simulate the crowded bacterial cytoplasmic environment have been used to study the assembly of the essential cell division protein FtsZ from Escherichia coli. In solutions containing a suitable concentration of physiological osmolytes, macromolecular crowding promotes the GTP-dependent assembly of FtsZ into dynamic two-dimensional polymers that disassemble upon GTP depletion. Atomic force microscopy reveals that these FtsZ polymers adopt the shape of ribbons that are one subunit thick. When compared with the FtsZ filaments observed in vitro in the absence of crowding, the ribbons show a lag in the GTPase activity and a decrease in the GTPase rate and in the rate of GTP exchange within the polymer. We propose that, in the crowded bacterial cytoplasm under assembly-promoting conditions, the FtsZ filaments tend to align forming dynamic ribbon polymers. In vivo these ribbons would fit into the Z-ring even in the absence of other interactions. Therefore, the presence of mechanisms to prevent the spontaneous assembly of the Z-ring in non-dividing cells must be invoked.     

Oligomerization of plant FtsZ1 and FtsZ2 plastid division proteins

FtsZ was identified in bacteria as the first protein to localize mid-cell prior to division and homologs have been found in many plant species. Bacterial studies demonstrated that FtsZ forms a ring structure that is dynamically exchanged with a soluble pool of FtsZ. Our previous work established that Arabidopsis FtsZ1 and FtsZ2-1 are capable of in vitro self-assembly into two distinct filament types, termed type-I and type-II and noted the presence of filament precursor molecules which prompted this investigation. Using a combination of electron microscopy, gel chromatography and native PAGE revealed that (i) prior to FtsZ assembly initiation the pool consists solely of dimers and (ii) during assembly of the Arabidopsis FtsZ type-II filaments the most common intermediate between the dimer and filament state is a tetramer. Three-dimensional reconstructions of the observed dimer and tetramer suggest these oligomeric forms may represent consecutive steps in type-II filament assembly and a mechanism is proposed, which is expanded to include FtsZ assembly into type-I filaments. Finally, the results permit a discussion of the oligomeric nature of the soluble pool in plants.     

Structure of Mycobacterium tuberculosis FtsZ reveals unexpected, G protein-like conformational switches

We report three crystal structures of the Mycobacterium tuberculosis cell division protein FtsZ, as the citrate, GDP, and GTPgammaS complexes, determined at 1.89, 2.60, and 2.08A resolution. MtbFtsZ crystallized as a tight, laterally oriented dimer distinct from the longitudinal polymer observed for alphabeta-tubulin. Mutational data on Escherichia coli FtsZ suggest that this dimer interface is important for proper protofilament and "Z-ring" assembly and function. An alpha-to-beta secondary structure conformational switch at the dimer interface is spatially analogous to, and has many of the hallmarks of, the Switch I conformational changes exhibited by G-proteins upon activation. The presence of a gamma-phosphate in the FtsZ active site modulates the conformation of the "tubulin" loop T3 (spatially analogous to the G-protein Switch II); T3 switching upon gamma-phosphate ligation is directly coupled to the alpha-to-beta switch by steric overlap. The dual conformational switches observed here for the first time in an FtsZ link GTP binding and hydrolysis to FtsZ (and tubulin) lateral assembly and Z-ring contraction, and they are suggestive of an underappreciated functional analogy between FtsZ, tubulin and G-proteins.     

Spatial resolution of two bacterial cell division proteins: ZapA recruits ZapB to the inner face of the Z‐ring

FtsZ, the essential regulator of bacterial cell division, is a dynamic cytoskeletal protein that forms helices that condense into the Z‐ring prior to division. Two small coiled‐coil proteins, ZapA and ZapB, are both recruited early to the Z‐ring. We show here that ZapB is recruited to the Z‐ring by ZapA. A direct interaction between ZapA and ZapB is supported by bacterial two‐hybrid and in vitro interaction assays. Using high‐resolution 3‐D reconstruction microscopy, we find that, surprisingly, ZapB is located inside the Z‐ring in virtually all cells investigated. We propose a molecular model in which ZapA increases lateral interactions between FtsZ proto‐filaments and ZapB mediates further stabilization of this interaction by cross‐linking ZapA molecules bound to adjacent FtsZ proto‐filaments. Gene deletion and complementation assays show that ZapB can mitigate cell division and Z‐ring assembly defects even in the absence of ZapA, raising the possibility that ZapB stimulates Z‐ring assembly by two different mechanisms.     

Helical tubes of FtsZ from Methanococcus jannaschii

Bacterial cell division depends on the formation of a cytokinetic ring structure, the Z-ring. The bacterial tubulin homologue FtsZ is required for Z-ring formation. FtsZ assembles into various polymeric forms in vitro, indicating a structural role in the septum of bacteria. We have used recombinant FtsZ1 protein from M. jannaschii to produce helical tubes and sheets with high yield using the GTP analogue GMPCPP [guanylyl-(alpha,beta)-methylene-diphosphate]. The sheets appear identical to the previously reported Ca++-induced sheets of FtsZ from M. jannaschii that were shown to consist of 'thick'-filaments in which two protofilaments run in parallel. Tubes assembled either in Ca++ or in GMPCPP contain filaments whose dimensions indicate that they could be equivalent to the 'thick'-filaments in sheets. Some tubes are hollow but others are filled by additional protein density. Helical FtsZ tubes differ from eukaryotic microtubules in that the filaments curve around the filament axis with a pitch of approximately 430 A for Ca++-induced tubes or 590 - 620 A for GMPCPP. However, their assembly in vitro as well-ordered polymers over distances comparable to the inner circumference of a bacterium may indicate a role in vivo. Their size and stability make them suitable for use in motility assays.     

Chloroplast Division Protein ARC3 Regulates Chloroplast FtsZ-Ring Assembly and Positioning in Arabidopsis through Interaction with FtsZ2

Chloroplast division is initiated by assembly of a mid-chloroplast FtsZ (Z) ring comprising two cytoskeletal proteins, FtsZ1 and FtsZ2. The division-site regulators ACCUMULATION AND REPLICATION OF CHLOROPLASTS3 (ARC3), MinD1, and MinE1 restrict division to the mid-plastid, but their roles are poorly understood. Using genetic analyses in Arabidopsis thaliana, we show that ARC3 mediates division-site placement by inhibiting Z-ring assembly, and MinD1 and MinE1 function through ARC3. ftsZ1 null mutants exhibited some mid-plastid FtsZ2 rings and constrictions, whereas neither constrictions nor FtsZ1 rings were observed in mutants lacking FtsZ2, suggesting FtsZ2 is the primary determinant of Z-ring assembly in vivo. arc3 ftsZ1 double mutants exhibited multiple parallel but no mid-plastid FtsZ2 rings, resembling the Z-ring phenotype in arc3 single mutants and showing that ARC3 affects positioning of FtsZ2 rings as well as Z rings. ARC3 overexpression in the wild type and ftsZ1 inhibited Z-ring and FtsZ2-ring assembly, respectively. Consistent with its effects in vivo, ARC3 interacted with FtsZ2 in two-hybrid assays and inhibited FtsZ2 assembly in a heterologous system. Our studies are consistent with a model wherein ARC3 directly inhibits Z-ring assembly in vivo primarily through interaction with FtsZ2 in heteropolymers and suggest that ARC3 activity is spatially regulated by MinD1 and MinE1 to permit Z-ring assembly at the mid-plastid.     

Large ring polymers align FtsZ polymers for normal septum formation

Cytokinesis in bacteria is initiated by polymerization of the tubulin homologue FtsZ into a circular structure at midcell, the Z-ring. This structure functions as a scaffold for all other cell division proteins. Several proteins support assembly of the Z-ring, and one such protein, SepF, is required for normal cell division in Gram-positive bacteria and cyanobacteria. Mutation of sepF results in deformed division septa. It is unclear how SepF contributes to the synthesis of normal septa. We have studied SepF by electron microscopy (EM) and found that the protein assembles into very large (～50 nm diameter) rings. These rings were able to bundle FtsZ protofilaments into strikingly long and regular tubular structures reminiscent of eukaryotic microtubules. SepF mutants that disturb interaction with FtsZ or that impair ring formation are no longer able to align FtsZ filaments in vitro, and fail to support normal cell division in vivo. We propose that SepF rings are required for the regular arrangement of FtsZ filaments. Absence of this ordered state could explain the grossly distorted septal morphologies seen in sepF mutants.     

Assembly and architecture of Escherichia coli divisome proteins FtsA and FtsZ

During Escherichia coli cell division, an intracellular complex of cell division proteins known as the Z-ring assembles at midcell during early division and serves as the site of constriction. While the predominant protein in the Z-ring is the widely conserved tubulin homolog FtsZ, the actin homolog FtsA tethers the Z-ring scaffold to the cytoplasmic membrane by binding to FtsZ. While FtsZ is known to function as a dynamic, polymerized GTPase, the assembly state of its partner, FtsA, and the role of ATP are still unclear. We report that a substitution mutation in the FtsA ATP-binding site impairs ATP hydrolysis, phospholipid vesicle remodeling in vitro, and Z-ring assembly in vivo. We demonstrate by transmission electron microscopy and Förster Resonance Energy Transfer that a truncated FtsA variant, FtsA(ΔMTS) lacking a C-terminal membrane targeting sequence, self assembles into ATP-dependent filaments. These filaments coassemble with FtsZ polymers but are destabilized by unassembled FtsZ. These findings suggest a model wherein ATP binding drives FtsA polymerization and membrane remodeling at the lipid surface, and FtsA polymerization is coregulated with FtsZ polymerization. We conclude that the coordinated assembly of FtsZ and FtsA polymers may serve as a key checkpoint in division that triggers cell wall synthesis and division progression.     

In vivo organization of the FtsZ‐ring by ZapA and ZapB revealed by quantitative super‐resolution microscopy

In most bacterial cells, cell division is dependent on the polymerization of the FtsZ protein to form a ring‐like structure (Z‐ring) at the midcell. Despite its essential role, the molecular architecture of the Z‐ring remains elusive. In this work we examine the roles of two FtsZ‐associated proteins, ZapA and ZapB, in the assembly dynamics and structure of the Z‐ring in Escherichia coli cells. In cells deleted of zapA or zapB, we observed abnormal septa and highly dynamic FtsZ structures. While details of these FtsZ structures are difficult to discern under conventional fluorescence microscopy, single‐molecule‐based super‐resolution imaging method Photoactivated Localization Microscopy (PALM) reveals that these FtsZ structures arise from disordered arrangements of FtsZ clusters. Quantitative analysis finds these clusters are larger and comprise more molecules than a single FtsZ protofilament, and likely represent a distinct polymeric species that is inherent to the assembly pathway of the Z‐ring. Furthermore, we find these clusters are not due to the loss of ZapB–MatP interaction in ΔzapA and ΔzapB cells. Our results suggest that the main function of ZapA and ZapB in vivo may not be to promote the association of individual protofilaments but to align FtsZ clusters that consist of multiple FtsZ protofilaments.