Hydrolysis of the 5'-p-nitrophenyl ester of TMP by the proofreading exonuclease (epsilon) subunit of Escherichia coli DNA polymerase III

The core of DNA polymerase III, the replicative polymerase in Escherichia coli, consists of three subunits (alpha, epsilon, and theta). The epsilon subunit is the 3'-5' proofreading exonuclease that associates with the polymerase (alpha) through its C-terminal region and theta through a 185-residue N-terminal domain (epsilon 186). A spectrophotometric assay for measurement of epsilon activity is described. Proteins epsilon and epsilon 186 and the epsilon 186.theta complex catalyzed the hydrolysis of the 5'-p-nitrophenyl ester of TMP (pNP-TMP) with similar values of k(cat) and K(M), confirming that the N-terminal domain of epsilon bears the exonuclease active site, and showing that association with theta has little direct effect on the chemistry occurring at the active site of epsilon. On the other hand, formation of the complex with theta stabilized epsilon 186 by approximately 14 degrees C against thermal inactivation. For epsilon 186, k(cat) = 293 min(-)(1) and K(M) = 1.08 mM at pH 8.00 and 25 degrees C, with a Mn(2+) concentration of 1 mM. Hydrolysis of pNP-TMP by epsilon 186 depended absolutely on divalent metal ions, and was inhibited by the product TMP. Dependencies on Mn(2+) and Mg(2+) concentrations were examined, giving a K(Mn) of 0.31 mM and a k(cat) of 334 min(-1) for Mn(2+) and a K(Mg) of 6.9 mM and a k(cat) of 19.9 min(-1) for Mg(2+). Inhibition by TMP was formally competitive [K(i) = 4.3 microM (with a Mn(2+) concentration of 1 mM)]. The pH dependence of pNP-TMP hydrolysis by epsilon 186, in the pH range of 6.5-9.0, was found to be simple. K(M) was essentially invariant between pH 6.5 and 8.5, while k(cat) depended on titration of a single group with a pK(a) of 7.7, approaching limiting values of 50 min(-1) at pH <6.5 and 400 min(-1) at pH >9.0. These data are used in conjunction with crystal structures of the complex of epsilon 186 with TMP and two Mn(II) ions bound at the active site to develop insights into the mechanisms of pNP-TMP hydrolysis by epsilon at high and low pH values.     

Porins of Pseudomonas fluorescens MFO as fibronectin-binding proteins

Gene araA encoding an L-arabinose isomerase (AraA) from the hyperthermophile, Thermotoga neapolitana 5068 was cloned, sequenced, and expressed in Escherichia coli. The gene encoded a polypeptide of 496 residues with a calculated molecular mass of 56677 Da. The deduced amino acid sequence has 94.8% identical amino acids compared with the residues in a putative L-arabinose isomerase of Thermotoga maritima. The recombinant enzyme expressed in E. coli was purified to homogeneity by heat treatment, ion exchange chromatography and gel filtration. The thermophilic enzyme had a maximum activity of L-arabinose isomerization and D-galactose isomerization at 85 degrees C, and required divalent cations such as Co(2+) and Mn(2+) for its activity and thermostability. The apparent K(m) values of the enzyme for L-arabinose and D-galactose were 116 mM (v(max), 119 micromol min(-1) mg(-1)) and 250 mM (v(max), 14.3 micromol min(-1) mg(-1)), respectively, that were determined in the presence of both 1 mM Co(2+) and 1 mM Mn(2+). A 68% conversion of D-galactose to D-tagatose was obtained using the recombinant enzyme at the isomerization temperature of 80 degrees C.     

Cloning, expression and characterization of trehalose-6-phosphate phosphatase from a psychrotrophic bacterium, Arthrobacter strain A3

A trehalose-6-phosphate phosphatase (TPP) gene, otsB, from a psychrotrophic bacterium, Arthrobacter strain A3, was identified. The product of this otsB gene is 266 amino acids in length with a calculated molecular weight of 27,873 Da. The protein was expressed in Escherichia coli and purified to apparent homogeneity. The purified recombinant TPP catalyzed the dephosphorylation of trehalose-6-phosphate to form trehalose and showed a broad optimum pH range from 5.0 to 7.5. This enzyme also showed an absolute requirement for Mg(2+) or Co(2+) for catalytic activity. The recombinant TPP had a maximum activity at 30 °C and maintained activity over a temperature range of 4-30 °C. TPP was generally heat-labile, losing 70 % of its activity when subjected to heat treatment at 50 °C for 6 min. Kinetic analysis of the Arthrobacter strain A3 TPP showed ~tenfold lower K (m) values when compared with values derived from other bacterial TPP enzymes. The highest k (cat)/K (m) value was 37.5 mM(-1) s(-1) (repeated three times), which is much higher than values published for mesophilic E. coli TPP, indicating that the Arthrobacter strain A3 TPP possessed excellent catalytic activity at low temperatures. Accordingly, these characteristics suggest that the TPP from the Arthrobacter strain A3 is a new cold-adapted enzyme. In addition, this is the first report characterizing the enzymatic properties of a TPP from a psychrotrophic organism.     

Characterization of a novel D-lyxose isomerase from Cohnella laevoribosii RI-39 sp. nov

A newly isolated bacterium, Cohnella laevoribosii RI-39, could grow in a defined medium with L-ribose as the sole carbon source. A 21-kDa protein isomerizing L-ribose to L-ribulose, as well as D-lyxose to D-xylulose, was purified to homogeneity from this bacterium. Based on the N-terminal and internal amino acid sequences of the purified enzyme obtained by N-terminal sequencing and quantitative time of flight mass spectrometry-mass spectrometry analyses, a 549-bp gene (lyxA) encoding D-lyxose (L-ribose) isomerase was cloned and expressed in Escherichia coli. The purified endogenous enzyme and the recombinant enzyme formed homodimers that were activated by Mn(2+). C. laevoribosii D-lyxose (L-ribose) isomerase (CLLI) exhibits maximal activity at pH 6.5 and 70 degrees C in the presence of Mn(2+) for D-lyxose and L-ribose, and its isoelectric point (pI) is 4.2 (calculated pI, 4.9). The enzyme is specific for D-lyxose, L-ribose, and D-mannose, with apparent K(m) values of 22.4 +/- 1.5 mM, 121.7 +/- 10.8 mM, and 34.0 +/- 1.1 mM, respectively. The catalytic efficiencies (k(cat)/K(m)) of CLLI were 84.9 +/- 5.8 mM(-1) s(-1) for D-lyxose (V(max), 5,434.8 U mg(-1)), 0.2 mM(-1) s(-1) for L-ribose (V(max), 75.5 +/- 6.0 U mg(-1)), and 1.4 +/- 0.1 mM(-1) s(-1) for D-mannose (V(max), 131.8 +/- 7.4 U mg(-1)). The ability of lyxA to permit E. coli cells to grow on D-lyxose and L-ribose and homology searches of other sugar-related enzymes, as well as previously described sugar isomerases, suggest that CLLI is a novel type of rare sugar isomerase.     

A nudix enzyme removes pyrophosphate from dihydroneopterin triphosphate in the folate synthesis pathway of bacteria and plants

Removal of pyrophosphate from dihydroneopterin triphosphate (DHNTP) is the second step in the pterin branch of the folate synthesis pathway. There has been controversy over whether this reaction requires a specific pyrophosphohydrolase or is a metal ion-dependent chemical process. The genome of Lactococcus lactis has a multicistronic folate synthesis operon that includes an open reading frame (ylgG) specifying a putative Nudix hydrolase. Because many Nudix enzymes are pyrophosphohydrolases, YlgG was expressed in Escherichia coli and characterized. The recombinant protein showed high DHNTP pyrophosphohydrolase activity with a K(m) value of 2 microM, had no detectable activity against deoxynucleoside triphosphates or other typical Nudix hydrolase substrates, required a physiological level (approximately 1 mM) of Mg(2+), and was active as a monomer. Essentially no reaction occurred without enzyme at 1 mM Mg(2+). Inactivation of ylgG in L. lactis resulted in DHNTP accumulation and folate depletion, confirming that YlgG functions in folate biosynthesis. We therefore propose that ylgG be redesignated as folQ. The closest Arabidopsis homolog of YlgG (encoded by Nudix gene At1g68760) was expressed in E. coli and shown to have Mg(2+)-dependent DHNTP pyrophosphohydrolase activity. This protein (AtNUDT1) was reported previously to have NADH pyrophosphatase activity in the presence of 5 mM Mn(2+) (Dobrzanska, M., Szurmak, B., Wyslouch-Cieszynska, A., and Kraszewska, E. (2002) J. Biol. Chem. 277, 50482-50486). However, we found that this activity is negligible at physiological levels of Mn(2+) and that, with 1 mM Mg(2+), AtNUDT1 prefers DHNTP and (deoxy) nucleoside triphosphates.     

Mutational analysis of the nuclease domain of Escherichia coli ribonuclease III. Identification of conserved acidic residues that are important for catalytic function in vitro

The ribonuclease III superfamily represents a structurally distinct group of double-strand-specific endonucleases with essential roles in RNA maturation, RNA decay, and gene silencing. Bacterial RNase III orthologs exhibit the simplest structures, with an N-terminal nuclease domain and a C-terminal double-stranded RNA-binding domain (dsRBD), and are active as homodimers. The nuclease domain contains conserved acidic amino acids, which in Escherichia coli RNase III are E38, E41, D45, E65, E100, D114, and E117. On the basis of a previously reported crystal structure of the nuclease domain of Aquifex aeolicus RNase III, the E41, D114, and E117 side chains of E. coli RNase III are expected to be coordinated to a divalent metal ion (Mg(2+) or Mn(2+)). It is shown here that the RNase III[E41A] and RNase III[D114A] mutants exhibit catalytic activities in vitro in 10 mM Mg(2+) buffer that are comparable to that of the wild-type enzyme. However, at 1 mM Mg(2+), the activities are significantly lower, which suggests a weakened affinity for metal. While RNase III[E41A] and RNase III[D114A] have K(Mg) values that are approximately 2.8-fold larger than the K(Mg) of RNase III (0.46 mM), the RNase III[E41A/D114A] double mutant has a K(Mg) of 39 mM, suggesting a redundant function for the two side chains. RNase III[E38A], RNase III[E65A], and RNase III[E100A] also require higher Mg(2+) concentrations for optimal activity, with RNase III[E100A] exhibiting the largest K(Mg). RNase III[D45A], RNase III[D45E], and RNase III[D45N] exhibit negligible activities, regardless of the Mg(2+) concentration, indicating a stringent functional requirement for an aspartate side chain. RNase III[D45E] activity is partially rescued by Mn(2+). The potential functions of the conserved acidic residues are discussed in the context of the crystallographic data and proposed catalytic mechanisms.     

Biochemical characterization of an ATP-dependent DNA ligase from the hyperthermophilic crenarchaeon <Emphasis Type="Italic">Sulfolobus shibatae</Emphasis>

A gene encoding a putative ATP-dependent DNA ligase was identified in the genome of the hyperthermophilic archaeon Sulfolobus shibatae and expressed in Escherichia coli. The 601 amino acid recombinant polypeptide was a monomeric protein capable of strand joining on a singly nicked DNA substrate in the presence of ATP ( K(m)=34 micro mu) and a divalent cation (Mn(2+), Mg(2+), or Ca(2+)). dATP was partially active in supporting ligation catalyzed by the protein, but GTP, CTP, UTP, dGTP, dCTP, dTTP, and NAD(+) were inactive. The cloned Ssh ligase showed an unusual metal cofactor requirement; it was significantly more active in the presence of Mn(2+) than in the presence of Mg(2+) or Ca(2+). Unexpectedly, the native Ssh ligase preferred Mg(2+) and Ca(2+) rather than Mn(2+). Both native and recombinant enzymes displayed optimal nick-joining activity at 60-80 degrees C. Ssh ligase discriminated against substrates containing mismatches on the 3'-side of nick junction and was more tolerant of mismatches at the 5'-end than of those at the penultimate 5'-end. The enzyme showed little activity on a 1-nucleotide gapped substrate. This is the first biochemical study of a DNA ligase from the crenarchaeotal branch of the archaea domain.     

Impact of electrostatics in redox modulation of oxidative stress by Mn porphyrins: protection of SOD-deficient Escherichia coli via alternative mechanism where Mn porphyrin acts as a Mn carrier

Understanding the factors that determine the ability of Mn porphyrins to scavenge reactive species is essential for tuning their in vivo efficacy. We present herein the revised structure-activity relationships accounting for the critical importance of electrostatics in the Mn porphyrin-based redox modulation systems and show that the design of effective SOD mimics (per se) based on anionic porphyrins is greatly hindered by inappropriate electrostatics. A new strategy for the beta-octabromination of the prototypical anionic Mn porphyrins Mn(III) meso-tetrakis(p-carboxylatophenyl)porphyrin ([Mn(III)TCPP](3-) or MnTBAP(3-)) and Mn(III) meso-tetrakis(p-sulfonatophenyl)porphyrin ([Mn(III)TSPP](3-)), to yield the corresponding anionic analogues [Mn(III)Br(8)TCPP](3-) and [Mn(III)Br(8)TSPP](3-), respectively, is described along with characterization data, stability studies, and their ability to substitute for SOD in SOD-deficient Escherichia coli. Despite the Mn(III)/Mn(II) reduction potential of [Mn(III)Br(8)TCPP](3-) and [Mn(III)Br(8)TSPP](3-) being close to the SOD-enzyme optimum and nearly identical to that of the cationic Mn(III) meso-tetrakis(N-methylpyridinium-2-yl)porphyrin (Mn(III)TM-2-PyP(5+)), the SOD activity of both anionic brominated porphyrins ([Mn(III)Br(8)TCPP](3-), E(1/2)=+213 mV vs NHE, log k(cat)=5.07; [Mn(III)Br(8)TSPP](3-), E(1/2)=+209 mV, log k(cat)=5.56) is considerably lower than that of Mn(III)TM-2-PyP(5+) (E(1/2)=+220 mV, log k(cat)=7.79). This illustrates the impact of electrostatic guidance of O(2)(-) toward the metal center of the mimic. With low k(cat), the [Mn(III)TCPP](3-), [Mn(III)TSPP](3-), and [Mn(III)Br(8)TCPP](3-) did not rescue SOD-deficient E. coli. The striking ability of [Mn(III)Br(8)TSPP](3-) to substitute for the SOD enzymes in the E. coli model does not correlate with its log k(cat). In fact, the protectiveness of [Mn(III)Br(8)TSPP](3-) is comparable to or better than that of the potent SOD mimic Mn(III)TM-2-PyP(5+), even though the dismutation rate constant of the anionic complex is 170-fold smaller. Analyses of the medium and E. coli cell extract revealed that the major species in the [Mn(III)Br(8)TSPP](3-) system is not the Mn complex, but the free-base porphyrin [H(2)Br(8)TSPP](4-) instead. Control experiments with extracellular MnCl(2) showed the lack of E. coli protection, indicating that "free" Mn(2+) cannot enter the cell to a significant extent. We proposed herein the alternative mechanism where a labile Mn porphyrin [Mn(III)Br(8)TSPP](3-) is not an SOD mimic per se but carries Mn into the E. coli cell.     

General enzymatic screens identify three new nucleotidases in Escherichia coli. Biochemical characterization of SurE, YfbR, and YjjG

To find proteins with nucleotidase activity in Escherichia coli, purified unknown proteins were screened for the presence of phosphatase activity using the general phosphatase substrate p-nitrophenyl phosphate. Proteins exhibiting catalytic activity were then assayed for nucleotidase activity against various nucleotides. These screens identified the presence of nucleotidase activity in three uncharacterized E. coli proteins, SurE, YfbR, and YjjG, that belong to different enzyme superfamilies: SurE-like family, HD domain family (YfbR), and haloacid dehalogenase (HAD)-like superfamily (YjjG). The phosphatase activity of these proteins had a neutral pH optimum (pH 7.0-8.0) and was strictly dependent on the presence of divalent metal cations (SurE: Mn(2+) > Co(2+) > Ni(2+) > Mg(2+); YfbR: Co(2+) > Mn(2+) > Cu(2+); YjjG: Mg(2+) > Mn(2+) > Co(2+)). Further biochemical characterization of SurE revealed that it has a broad substrate specificity and can dephosphorylate various ribo- and deoxyribonucleoside 5'-monophosphates and ribonucleoside 3'-monophosphates with highest affinity to 3'-AMP. SurE also hydrolyzed polyphosphate (exopolyphosphatase activity) with the preference for short-chain-length substrates (P(20-25)). YfbR was strictly specific to deoxyribonucleoside 5'-monophosphates, whereas YjjG showed narrow specificity to 5'-dTMP, 5'-dUMP, and 5'-UMP. The three enzymes also exhibited different sensitivities to inhibition by various nucleoside di- and triphosphates: YfbR was equally sensitive to both di- and triphosphates, SurE was inhibited only by triphosphates, and YjjG was insensitive to these effectors. The differences in their sensitivities to nucleotides and their varied substrate specificities suggest that these enzymes play unique functions in the intracellular nucleotide metabolism in E. coli.     

Escherichia coli Open Reading Frame 696 Is idi, a Nonessential Gene Encoding Isopentenyl Diphosphate Isomerase

Isopentenyl diphosphate isomerase catalyzes the interconversion of isopentenyl diphosphate (IPP) and dimethylallyl diphosphate (DMAPP). In eukaryotes, archaebacteria, and some bacteria, IPP is synthesized from acetyl coenzyme A by the mevalonate pathway. The subsequent isomerization of IPP to DMAPP activates the five-carbon isoprene unit for subsequent prenyl transfer reactions. In Escherichia coli, the isoprene unit is synthesized from pyruvate and glyceraldehyde-3-phosphate by the recently discovered nonmevalonate pathway. An open reading frame (ORF696) encoding a putative IPP isomerase was identified in the E. coli chromosome at 65.3 min. ORF696 was cloned into an expression vector; the 20.5 kDa recombinant protein was purified in three steps, and its identity as an IPP isomerase was established biochemically. The gene for IPP isomerase, idi, is not clustered with other known genes for enzymes in the isoprenoid pathway. E. coli FH12 was constructed by disruption of the chromosomal idi gene with the aminoglycoside 3'-phosphotransferase gene and complemented by the wild-type idi gene on plasmid pFMH33 with a temperature-sensitive origin of replication. FH12/pFMH33 was able to grow at the restrictive temperature of 44 degrees C and FH12 lacking the plasmid grew on minimal medium, thereby establishing that idi is a nonessential gene. Although the V(max) of the bacterial protein was 20-fold lower than that of its yeast counterpart, the catalytic efficiencies of the two enzymes were similar through a counterbalance in K(m)s. The E. coli protein requires Mg(2+) or Mn(2+) for activity. The enzyme contains conserved cysteine and glutamate active-site residues found in other IPP isomerases.     

Metal requirements of a diadenosine pyrophosphatase from Bartonella bacilliformis: magnetic resonance and kinetic studies of the role of Mn2+

Recombinant IalA protein from Bartonella bacilliformis is a monomeric adenosine 5'-tetraphospho-5'-adenosine (Ap4A) pyrophosphatase of 170 amino acids that catalyzes the hydrolysis of Ap4A, Ap5A, and Ap6A by attack at the delta-phosphorus, with the departure of ATP as the leaving group [Cartwright et al. (1999) Biochem. Biophys. Res. Commun. 256, 474-479]. When various divalent cations were tested over a 300-fold concentration range, Mg2+, Mn2+, and Zn2+ ions were found to activate the enzyme, while Ca2+ did not. Sigmoidal activation curves were observed with Mn2+ and Mg2+ with Hill coefficients of 3.0 and 1.6 and K0.5 values of 0.9 and 5.3 mM, respectively. The substrate M2+ x Ap4A showed hyperbolic kinetics with Km values of 0.34 mM for both Mn2+ x Ap4A and Mg2+ x Ap4A. Direct Mn2+ binding studies by electron paramagnetic resonance (EPR) and by the enhancement of the longitudinal relaxation rate of water protons revealed two Mn2+ binding sites per molecule of Ap4A pyrophosphatase with dissociation constants of 1.1 mM, comparable to the kinetically determined K0.5 value of Mn2+. The enhancement factor of the longitudinal relaxation rate of water protons due to bound Mn2+ (epsilon b) decreased with increasing site occupancy from a value of 12.9 with one site occupied to 3.3 when both are occupied, indicating site-site interaction between the two enzyme-bound Mn2+ ions. Assuming the decrease in epsilon(b) to result from cross-relaxation between the two bound Mn2+ ions yields an estimated distance of 5.9 +/- 0.4 A between them. The substrate Ap4A binds one Mn2+ (Kd = 0.43 mM) with an epsilon b value of 2.6, consistent with the molecular weight of the Mn2+ x Ap4A complex. Mg2+ binding studies, in competition with Mn2+, reveal two Mg2+ binding sites on the enzyme with Kd values of 8.6 mM and one Mg2+ binding site on Ap4A with a Kd of 3.9 mM, values that are comparable to the K0.5 for Mg2+. Hence, with both Mn2+ and Mg2+, a total of three metal binding sites were found-two on the enzyme and one on the substrate-with dissociation constants comparable to the kinetically determined K0.5 values, suggesting a role in catalysis for three bound divalent cations. Ca2+ does not activate Ap4A pyrophosphatase but inhibits the Mn2+-activated enzyme competitively with a Ki = 1.9 +/- 1.3 mM. Ca2+ binding studies, in competition with Mn2+, revealed two sites on the enzyme with dissociation constants (4.3 +/- 1.3 mM) and one on Ap4A with a dissociation constant of 2.1 mM. These values are similar to its Ki suggesting that inhibition by Ca2+ results from the complete displacement of Mn2+ from the active site. Unlike the homologous MutT pyrophosphohydrolase, which requires only one enzyme-bound divalent cation in an E x M2+ x NTP x M2+ complex for catalytic activity, Ap4A pyrophosphatase requires two enzyme-bound divalent cations that function in an active E x (M2+)2 x Ap4A x M2+ complex.     

Escherichia coli cytosine deaminase: the kinetics and thermodynamics for binding of cytosine to the apoenzyme and the Zn(2+) holoenzyme are similar

Recombinant Escherichia coli cytosine deaminase is purified as a mixture of Zn(2+) and Fe(2+) forms of the enzyme. Fe(2+) is removed readily by o-phenanthroline to yield apoenzyme (apoCDase) that contains <0.2 mol of Zn(2+)per mol of subunit. ApoCDase was efficiently reconstituted to Zn(2+)CDase by treatment with ZnCl(2). The interaction of cytosine with apoCDase and Zn(2+)CDase was investigated at pH 7.5 and 25 degrees C by monitoring changes in intrinsic protein fluorescence. The values for the kinetic data K(1), k(2), and k(3) for Zn(2+)CDase were 0.25 mM, 80 s(-1), and 38 s(-1), respectively. The value for k(-2) was statistically indistinguishable from zero. The analogous values for K(1), k(2), and k(-2), (k(3)=0) for apoCDase were 0.157 mM, 186 s(-1) and approximately 0.8 s(-1), respectively. The overall dissociation constant of apoCDase for cytosine was 0.00069 mM, whereas the K(m) of Zn(2+)CDase for cytosine was 0.20 mM. The pre-steady state phase of the reaction was associated with an absorbance increase at 280 nm that was attributed to solvent perturbation of the spectrum of cytosine or enzyme. Formation of the Fe(2+)CDase-cytosine complex was too rapid to monitor by these techniques.     

Kinetic and magnetic resonance studies of the role of metal ions in the mechanism of Escherichia coli GDP-mannose mannosyl hydrolase, an unusual nudix enzyme

Escherichia coli GDP-mannose mannosyl hydrolase (GDPMH), a homodimer, catalyzes the hydrolysis of GDP-alpha-D-sugars to yield the beta-D-sugar and GDP by nucleophilic substitution with inversion at the C1' carbon of the sugar [Legler, P. M., Massiah, M. A., Bessman, M. J., and Mildvan, A. S. (2000) Biochemistry 39, 8603-8608]. GDPMH requires a divalent cation for activity such as Mn2+ or Mg2+, which yield similar kcat values of 0.15 and 0.13 s(-1), respectively, at 22 degrees C and pH 7.5. Kinetic analysis of the Mn2+-activated enzyme yielded a K(m) of free Mn2+ of 3.9 +/- 1.3 mM when extrapolated to zero substrate concentration (K(a)Mn2+), which tightened to 0.32 +/- 0.18 mM when extrapolated to infinite substrate concentration (K(m)Mn2+). Similarly, the K(m) of the substrate extrapolated to zero Mn2+ concentration (K(S)(GDPmann) = 1.9 +/- 0.5 mM) and to infinite Mn2+ concentration (K(m)(GDPmann) = 0.16 +/- 0.09 mM) showed an order of magnitude decrease at saturating Mn2+. Such mutual tightening of metal and substrate binding suggests the formation of an enzyme-metal-substrate bridge complex. Direct Mn2+ binding studies, monitoring the concentration of free Mn2+ by EPR and of bound Mn2+ by its enhanced paramagnetic effect on the longitudinal relaxation rate of water protons (PRR), detected three Mn2+ binding sites per enzyme monomer with an average dissociation constant (K(D)) of 3.2 +/- 1.0 mM, in agreement with the kinetically determined K(a)Mn2+. The enhancement factor (epsilon(b)) of 11.5 +/- 1.2 indicates solvent access to the enzyme-bound Mn2+ ions. No cross relaxation was detected among the three bound Mn2+ ions, suggesting them to be separated by at least 10 A. Such studies also yielded a weak dissociation constant for the binary Mn2+-GDP-mannose complex (K1 = 6.5 +/- 1.0 mM) which significantly exceeded the kinetically determined K(m) values of Mn2+, indicating the true substrate to be GDP-mannose rather than its Mn2+ complex. Substrate binding monitored by changes in 1H-15N HSQC spectra yielded a dissociation constant for the binary E-GDP-mannose complex (K(S)(GDPmann)) of 4.0 +/- 0.5 mM, comparable to the kinetically determined K(S) value (1.9 +/- 0.5 mM). To clarify the metal stoichiometry at the active site, product inhibition by GDP, a potent competitive inhibitor (K(I) = 46 +/- 27 microM), was studied. Binding studies revealed a weak, binary E-GDP complex (K(D)(GDP) = 9.4 +/- 3.2 mM) which tightened approximately 500-fold in the presence of Mn2+ to yield a ternary E-Mn2+-GDP complex with a dissociation constant, K3(GDP) = 18 +/- 9 microM, which overlaps with the K(I)(GDP). The tight binding of Mn2+ to 0.7 +/- 0.2 site per enzyme subunit in the ternary E-Mn2+-GDP complex (K(A)' = 15 microM) and the tight binding of GDP to 0.8 +/- 0.1 site per enzyme subunit in the ternary E-Mg2+-GDP complex (K3 < 0.5 mM) indicate a stoichiometry close to 1:1:1 at the active site. The decrease in the enhancement factor of the ternary E-Mn2+-GDP complex (epsilon(T) = 4.9 +/- 0.4) indicates decreased solvent access to the active site Mn2+, consistent with an E-Mn2+-GDP bridge complex. Fermi contact splitting (4.3 +/- 0.2 MHz) of the phosphorus signal in the ESEEM spectrum established the formation of an inner sphere E-Mn2+-GDP complex. The number of water molecules coordinated to Mn2+ in this ternary complex was determined by ESEEM studies in D2O to be two fewer than on the average Mn2+ in the binary E-Mn2+ complexes, consistent with bidentate coordination of enzyme-bound Mn2+ by GDP. Kinetic, metal binding, and GDP binding studies with Mg2+ yielded dissociation constants similar to those found with Mn2+. Hence, GDPMH requires one divalent cation per active site to promote catalysis by facilitating the departure of the GDP leaving group, unlike its homologues the MutT pyrophosphohydrolase, which requires two, or Ap4A pyrophosphatase, which requires three.     

Properties of D-arabinose isomerase purified from two strains of Escherichia coli

d-Arabinose isomerase (EC 5.3.1.3) has been isolated from l-fucose-induced cultures of Escherichia coli K-12 and d-arabinose-induced cultures of E. coli B/r. Both enzymes were homogeneous in an ultracentrifuge and migrated as single bands upon disc electrophoresis in acrylamide gels. The s(20,w) was 14.5 x 10(-13) sec for the E. coli K-12 enzyme and 14.3 x 10(-13) sec for the E. coli B/r enzyme. The molecular weight, determined by high-speed sedimentation equilibrium, was 3.55 +/- 0.06 x 10(5) for the E. coli K-12 enzyme and 3.42 +/- 0.04 x 10(5) for the enzyme isolated from E. coli B/r. Both enzyme preparations were active wth l-fucose or d-arabinose as substrates and showed no activity on any of the other aldopentoses or aldohexoses tested. With the E. coli K-12 enzyme, the K(m) was 2.8 x 10(-1)m for d-arabinose and 4.5 x 10(-2)m for l-fucose; with the E. coli B/r enzyme, the K(m) was 1.7 x 10(-1)m for d-arabinose and 4.2 x 10(-2)m for l-fucose. Both enzymes were inhibited by several of the polyalcohols tested, ribitol, l-arabitol, and dulcitol being the strongest. Both enzymes exhibited a broad plateau of optimal catalytic activity in the alkaline range. Both enzymes were stimulated by the presence of Mn(2+) or Co(2+) ions, but were strongly inhibited by the presence of Cd(2+) ions. Both enzymes were precipitated by antisera prepared against either enzyme preparation. The amino acid composition for both proteins has been determined; a striking similarity has been detected. Both enzymes could be dissociated, by protonation at pH 2 or by dialysis against buffer containing 8 m urea, into subunits that were homogeneous in an ultracentrifuge and migrated as single bands on disc electrophoresis in acrylamide gels containing urea. The molecular weight of the subunit, determined by high-speed sedimentation equilibrium, was 9.09 +/- 0.2 x 10(4) for the enzyme from E. coli K-12 and 8.46 +/- 0.1 x 10(4) for the enzyme from E. coli B/r. On the basis of biophysical studies, both isomerases appear to be oligomeric proteins consisting of four identical subunits.     

Synthesis of 4-hydroxyisoleucine by the aldolase-transaminase coupling reaction and basic characterization of the aldolase from Arthrobacter simplex AKU 626

Arthrobacter simplex AKU 626 was found to synthesize 4-hydroxyisoleucine from acetaldehyde, alpha-ketobutyrate, and L-glutamate in the presence of Escherichia coli harboring the branched chain amino acid transaminase gene (ilvE) from E. coli K12 substrain MG1655. By using resting cells of A. simplex AKU 626 and E. coli BL21(DE3)/pET-15b-ilvE, 3.2 mM 4-hydroxyisoleucine was produced from 250 mM acetaldehyde, 75 mM alpha-ketobutyrate, and 100 mM L-glutamate with a molar yield to alpha-ketobutyrate of 4.3% in 50 mM Tris-HCl buffer (pH 7.5) containing 2 mM MnCl(2) x 4H(2)O at 28 degrees C for 2 h. An aldolase that catalyzes the aldol condensation of acetaldehyde and alpha-ketobutyrate was purified from A. simplex AKU 626. Mn(2+) and pyridoxal 5'-monophosphate were effective in stabilizing the enzyme. The native and subunit molecular masses of the purified aldolase were about 180 and 32 kDa respectively. The N-terminal amino acid sequence of the purified enzyme showed no significant homology to known aldolases.     

Kinetic characterization of Na,K-ATPase from rabbit outer renal medulla: properties of the (alpha beta)(2) dimer

We describe and compare the main kinetic characteristics of the (alpha beta)(2) form of rabbit kidney Na,K-ATPase. The dependence of ATPase activity on ATP concentration revealed high (K(0.5)=4 microM) and low (K(0.5)=1.4 mM) affinity sites for ATP, exhibiting negative cooperativity and a specific activity of approximately 700 U/mg. For p-nitrophenylphosphate (PNPP) as substrate, a single saturation curve was found, with a smaller apparent affinity of the enzyme for this substrate (K(0.5)=0.5 mM) and a lower hydrolysis rate (V(M)=42 U/mg). Stimulation of ATPase activity by K(+) (K(0.5)=0.63 mM), Na(+) (K(0.5)=11 mM) and Mg(2+) (K(0.5)=0.60 mM) all showed V(M)'s of approximately 600 U/mg and negative cooperativity. K(+) (K(0.5)=0.69 mM) and Mg(2+) (K(0.5)=0.57 mM) also stimulated PNPPase activity of the (alpha beta)(2) form. Ouabain (K(0.5)=0.01 microM and K(0.5)=0.1 mM) and orthovanadate (K(0.5)=0.06 microM) completely inhibited the ATPase activity of the (alpha beta)(2) form. The kinetic characteristics obtained constitute reference values for diprotomeric (alpha beta)(2)-units of Na,K-ATPase, thus contributing to a better understanding of the biochemical mechanisms of the enzyme.     

TatD is a cytoplasmic protein with DNase activity. No requirement for TatD family proteins in sec-independent protein export

The Escherichia coli Tat system mediates Sec-independent export of protein precursors bearing twin arginine signal peptides. Genes known to be involved in this process include tatA, tatB, and tatC that form an operon with a fourth gene, tatD. The tatD gene product has two homologues in E. coli coded by the unlinked ycfH and yjjV genes. An E. coli strain with in-frame chromosomal deletions in all three of tatD, ycfH, and yjjV exhibits no significant defect in the cellular location of five cofactor-containing enzymes that are synthesized with twin arginine signal peptides. Neither these mutations nor overproduction of the TatD protein cause any discernible effect on the export kinetics of an additional E. coli Tat pathway substrate. It is concluded that proteins of the TatD family have no obligate involvement in protein export by the Tat system. TatD is shown to be a cytoplasmic protein. TatD binds to immobilized Ni(2+) or Zn(2+) affinity columns and exhibits magnesium-dependent DNase activity. Features of the tatA operon that may control TatD expression are discussed.