Fluorescence quenching studies of Trp repressor-operator interaction

Steady-state quenching and time-resolved fluorescence measurements of L-tryptophan binding to the tryptophan-free mutant W19/99F of the tryptophan repressor of Escherichia coli have been used to observe the coreperessor microenvirnment changes upon ligand binding. Using iodide and acrylamide as quenchers, we have resolved the emission spectra of the corepressor into two components. The bluer component of L-tryptophan buried in the holorepressor exhibits a maximum of the fluorescence emission at 336 nm and can be characterized by a Stern–Volmer quenching constant equal to about 2.0–2.3 M^–1. The second, redder component is exposed to the solvent and possesses the fluorescence emission and Stern–Volmer quenching constant characteristic of L-tryptophan in the solvent. When the Trp holorepressor is bound to the DNA operator, further alterations in the corepressor fluorescence are observed. Acrylamide quenching experiments indicate that the Stern–Volmer quenching constant of the buried component of the corepressor decreases drastically to a value of 0.56 M^–1. The fluorescence lifetimes of L-tryptophan in a complex with Trp repressor decrease substantially upon binding to DNA, which indicates a dynamic mechanism of the quenching process.     

A fluorescence study of Tn10-encoded Tet repressor

Steady-state fluorescence quenching and time-resolved measurements have been performed to resolve the fluorescence contributions of the two tryptophan residues, W43 and W75, in the subunit of the homodimer of the Tet repressor fromEscherichia coli. The W43 residue is localized within the helix-turn-helix structural domain, which is responsible for sequence-specific binding of the Tet repressor to thetet operator. The W75 residue is in the protein matrix near the tetracycline-binding site. The assignment of the two residues has been confirmed by use of single-tryptophan mutants carrying either W43 or W75. The FQRS (fluorescence-quenching-resolved-spectra) method has been used to decompose the total emission spectrum of the wild-type protein into spectral components. The resolved spectra have maxima of fluorescence at 349 and 324 nm for the W43 and W75 residues, respectively. The maxima of the resolved spectra are in excellent agreement with those found using single-tryptophan-containing mutants. The fluorescence decay properties of the wild type as well as of both mutants of Tet repressor have been characterized by carrying out a multitemperature study. The decays of the wild-type Tet repressor and W43-containing mutant can be described as being of double-exponential type. The W75 mutant decay can be described by a Gaussian continuous distribution centered at 5.0 nsec with a bandwidth equal to 1.34 nsec. The quenching experiments have shown the presence of two classes of W43 emission. One of the components, exposed to solvent, has a maximum of fluorescence emission at 355 nm, with the second one at about 334 nm. The red-emitting component can be characterized by bimolecular-quenching rate constant,k _q equal to 2.6×10⁹, 2.8×10⁹, and 2.0×10⁹ M^–1 sec^–1 for acrylamide, iodide, and succinimide, respectively. The bluer component is unquenchable by any of the quenchers used. The W75 residue of the Tet repressor has quenching rate constant equal to 0.85×10⁹ and 0.28 × 10⁹ M^–1 sec^–1 for acrylamide and succinimide, respectively. These values indicate that the W75 is not deeply buried within the protein matrix. Our results indicate that the Tet repressor can exist in its ground state in two distinct conformational states which differ in the microenvironment of the W43 residue.Abbreviations FQRS fluorescence-quenching-resolved spectra - HTH helix-turn-helix motif - TetR tetracycline repressor fromE. coli - WT wild-type TetR - W43 single point mutant with phenyloalanine substituted for tryptophan at position 75 in both subunits - W75 single point mutant with phenyloalanine substituted for tryptophan at position 43 in both subunits     

Fluorescence quenching studies of nitrated polycyclic aromatic hydrocarbons

The analysis of nitrated polycyclic aromatic hydrocarbons (NPAHs) is of great importance because of the mutagenicity and possible carcinogenic activity of these compounds, which are distributed widely in the environment. Nitro‐substituents in aromatic compounds are known to quench fluorescence and NPAHs have no intrinsic fluorescence, but they can be determined using their quenching effects on other fluorophores. The quenching effects of several important NPAHs on 1,2,3,4‐ tetrahydro‐1‐naphthol,5,6,7,8‐tetrahydro‐1‐naphthol,4‐(2‐hydroxy‐4‐sulfo‐1‐naphthylazo)‐2‐naphthalene carboxylic acid and 7‐amino‐4‐methyl coumarin have been studied. The singlet emission of these fluorophores is efficiently quenched by all the NPAHs, the quenching following the Stern–Volmer relationship. Quenching constants and the limits of detection and linear ranges of the quenchers have been determined in each case: the limits of detection are ca 1 µm . Copyright © 2010 John Wiley & Son, Ltd.     

Mutants in position 69 of the Trp repressor ofEscherichia coli K12 with altered DNA-binding specificity

Structural analysis by X-ray crystallography has indicated that direct contact occurs between Arg69, the second residue of the first helix of the helix-turn-helix (HTH) motif of the Trp repressor, and guanine in position 9 of the -centred consensustrp operator. We therefore replaced residue 69 of the Trp repressor with Gly, Ile, Leu or Gln and tested the resultant repressor mutants for their binding to synthetic symmetrical -or -centredtrp operator variants, in vivo and in vitro. We present genetic and biochemical evidence that Ile in position 69 of the Trp repressor interacts specifically with thymine in position 9 of the -centredtrp operator. There are also interactions with other bases in positions 8 and 9 of the -centredtrp operator. In vitro, the Trp repressor of mutant RI69 binds to the consensus -centredtrp operator and a similartrp operator variant that carries a T in position 9. In vivo analysis of the interactions of Trp repressor mutant RI69 with symmetrical variants of the -centredtrp operator shows a change in the specificity of binding to a -centred symmetricaltrp operator variant with a gua-nine to thymine substitution in position 5, which corresponds to position 9 of the -centredtrp operator.     

Fluorescence of native single-Trp mutants in the lactose permease from Escherichia coli: structural properties and evidence for a substrate-induced conformational change.

Six single-Trp mutants were engineered by individually reintroducing each of the native Trp residues into a functional lactose permease mutant devoid of Trp (Trp-less permease; Menezes ME, Roepe PD, Kaback HR, 1990, Proc Natl Acad Sci USA 87:1638-1642), and fluorescent properties were studied with respect to solvent accessibility, as well as alterations produced by ligand binding. The emission of Trp 33, Trp 78, Trp 171, and Trp 233 is strongly quenched by both acrylamide and iodide, whereas Trp 151 and Trp 10 display a decrease in fluorescence in the presence of acrylamide only and no quenching by iodide. Of the six single-Trp mutants, only Trp 33 exhibits a significant change in fluorescence (ca. 30% enhancement) in the presence of the substrate analog beta,D-galactopyranosyl 1-thio-beta,D-galactopyranoside (TDG). This effect was further characterized by site-directed fluorescent studies with purified single-Cys W33-->C permease labeled with 2-(4'-maleimidylanilino)-naphthalene-6-sulfonic acid (MIANS). Titration of the change in the fluorescence spectrum reveals a 30% enhancement accompanied with a 5-nm blue shift in the emission maximum, and single exponential behavior with an apparent KD of 71 microM. The effect of substrate binding on the rate of MIANS labeling of single-Cys 33 permease was measured in addition to iodide and acrylamide quenching of the MIANS-labeled protein. Complete blockade of labeling is observed in the presence of TDG, as well as a 30% decrease in accessibility to iodide with no change in acrylamide quenching. Overall, the findings are consistent with the proposal (Wu J, Frillingos S, Kaback HR, 1995a, Biochemistry 34:8257-8263) that ligand binding induces a conformational change at the C-terminus of helix I such that Pro 28 and Pro 31, which are on one face, become more accessible to solvent, whereas Trp 33, which is on the opposite face, becomes less accessible to the aqueous phase. The findings regarding accessibility to collisional quenchers are also consistent with the predicted topology of the six native Trp residues in the permease.     

Fluorescence quenching in riboflavin-binding protein and its complex with riboflavin

Fluorescence quenching of tryptophan residues in egg-white riboflavin-binding protein by two typical quenchers (charged iodide and uncharged acrylamide) reveals acid-induced changes of protein conformation. At neutralpH, acrylamide flow in macromolecule, (i.e., the quenching effect) is decisive; tryptophan residue accessibility for iodide is small. At lowpH, some tryptophan residues are exposed to the protein surface and become more accessible to iodide. In contrast, acrylamide is less able to permeate this conformational state of RBP. Fluorescence of tryptophan residues in riboflavin-RBP complex and chemically N-bromosucinimide-modified RBP was quenched by iodide and acrylamide.     

Ni2+ binds to active site of hen egg-white lysozyme and quenches fluorescence of Trp62 and Trp108

We found that the maximum emission of the tryptophyl fluorescence of hen egg-white lysozyme is shifted from 337 to 323 nm and quenched to the extent of 55% with an increase in concentrations of NiCl2 from 0 to 2M in 50 mM Na acetate buffer (pH 4.7). In contrast, NaCl does not influence the fluorescence of lysozyme up to 2M. To elucidate the particular effects of Ni2+ on the tryptophyl fluorescence of lysozyme, we have measured the assembly behavior and secondary structure of lysozyme in various concentrations of NiCl2, and determined the structures of lysozyme crystals grown in 0.3, 0.5, and 1.0M NiCl2, respectively. The results of analytical centrifugation and circular dichroism experiments show that lysozyme keeps a monomer state and has an identical secondary structure, irrespective of NiCl2 concentrations. The crystal structures show that all crystals grown in different concentrations of NiCl2 have an identical main chain and side chain conformation. And one Ni2+ binding with Odelta atom of Asp52 in the active site and coordinating with five water molecules to form hexagonal coordination has been determined for each crystal structure. Based on these results, we have proposed that Ni2+ quenches the fluorescence of Trp62 and Trp108 due to the binding of Ni2+ to the active site of lysozyme.     

Fluorescence anisotropy studies of molecularly imprinted polymers.

A molecularly imprinted polymer (MIP) is a biomimetic material that can be used as a biochemical sensing element. We studied the steady-state and time-resolved fluorescence and fluorescence anisotropy of anthracene-imprinted polyurethane. We compared MIPs with imprinted analytes present, MIPs with the imprinted analytes extracted, MIPs with rebound analytes, non-imprinted control polymers (non-MIPs) and non-MIPs bound with analytes to understand MIP's binding behaviour. MIPs and non-MIPs had similar steady-state fluorescence anisotropy in the range 0.11-0.24. Anthracene rebound in MIPs and non-MIPs had a fluorescence lifetime of tau = 0.64 ns and a rotational correlation time of phi(F) = 1.2-1.5 ns, both of which were shorter than that of MIPs with imprinted analytes present (tau = 2.03 ns and phi(F) = 2.7 ns). The steady-state anisotropy of polymer solutions increased exponentially with polymerization time and might be used to characterize the polymerization extent in situ.     

A possible tertiary structure change induced by acrylamide in the DNA-binding domain of the Tn10-encoded Tet repressor. A fluorescence study

A thorough investigation of the acrylamide fluorescence quenching of F75TetR, a mutant of the Tn10-encoded TetR repressor containing a single Trp residue at position 43, was carried out. The Trp-43 residue is located in a helix-turn-helix (H-t-H) motif involved in the specific binding of F75TetR to the operator site in specific DNA. Distinct Ranges of acrylamide concentration have been assumed. At acrylamide concentrations below 0.15–0.2 M (a usual range of values in fluorescence quenching studies) the observed limited tertiary structure change induced by acrylamide is consistent with a noncooperative local unfolding of the DNA-binding domain. It is suggested that penetration of the neutral quencher could cause the deletion of a hydrophobic tertiary structure contact, partly involving TrP-43, responsible for the anchoring of the H-t-H motif inside the three-helix protein bundle, characterizing the N-terminal part. Correspondingly, the affinity of the mutant repressor for the operator was shown to decrease substantially (about five orders of magnitude), seemingly losing its specificity. A subsequent phase, up to 0.8 M acrylamide, was observed in which the involved intermediate protein structure is not further perturbed, nor is DNA binding.Abbreviations Tris tris(hydroxymethyl)aminomethane - DTT dithiothreitol - FVSTetR engineered tetracycline repressor in which the Trp residue at the position 75 in the wild-type repressor TetR is replaced by a Phe residue - H-t-H helix-turn-helix super-secondary structure     

Trp42 rotamers report reduced flexibility when the inhibitor acetyl-pepstatin is bound to HIV-1 protease

The Q7K/L331/L631 HIV-1 protease mutant was expressed in Escherichia coli and the effect of binding a substrate-analog inhibitor, acetyl-pepstatin, was investigated by fluorescence spectroscopy and molecular dynamics. The dimeric enzyme has four intrinsic tryptophans, located at positions 6 and 42 in each monomer. Fluorescence spectra and acrylamide quenching experiments show two differently accessible Trp populations in the apoenzyme with k(q1) = 6.85 x 10(9) M(-1) s(-1) and k(q2) = 1.88 x 10(9) M(-1) s(-1), that merge into one in the complex with k(q) = 1.78 x 10(9) M(-1) s(-1). 500 ps trajectory analysis of Trp X1/X2 rotameric interconversions suggest a model to account for the observed Trp fluorescence. In the simulations, Trp6/Trp6B rotameric interconversions do not occur on this timescale for both HIV forms. In the apoenzyme simulations, however, both Trp42s and Trp42Bs are flipping between X1/X2 states; in the complexed form, no such interconverions occur. A detailed investigation of the local Trp environments sampled during the molecular dynamics simulation suggests that one of the apoenzyme Trp42B rotameric interconversions would allow indole-quencher contact, such as with nearby Tyr59. This could account for the short lifetime component. The model thus interprets the experimental data on the basis of the conformational fluctuations of Trp42s alone. It suggests that the rotameric interconversions of these Trps, located relatively far from the active site and at the very start of the flap region, becomes restrained when the apoenzyme binds the inhibitor. The model is thus consistent with associating components of the fluorescence decay in HIV-1 protease to ground state conformational heterogeneity.     

Fluorescence lifetime and quenching studies on some interesting diphenylhexatriene membrane probes

The fluorescence lifetimes of a number of membrane probes based on the 1,6-diphenylhexatriene (DPH) chromophore have been measured in small unilamellar phospholipid vesicles and found to be multiphasic. These probes were quenched by sodium iodide with different efficiencies in vesicles and this has been attributed to the depth of the particular probe in the bilayer. The distribution of the probe between the outer and inner monolayer has been determined for those probes with fixed positions in the bilayer. The iodide ion permeability of the bilayer was found to be immeasurably small over a 3 h period.     

Fluorescence lifetime analysis of DNA intercalated ethidium bromide and quenching by free dye

The fluorescence characteristics of ethidium bromide (Eb) complexed to calf thymus DNA have been examined using fluorescence lifetime analysis for a range of DNA (effective nucleotide concentration) to Eb molar ratios. Control of both temperature and ion concentration is necessary for reproducible analyses. Eb complexed to double stranded DNA has a maximum fluorescence lifetime of 23 ns and is easily distinguishable from a fluorescence lifetime value of 1.67 ns corresponding to unbound Eb. In a solution of calf thymus DNA containing excess Eb a binding equilibrium is reached, and this corresponds to one Eb molecule for every five nucleotides. With increasing amounts of unbound Eb, the fluorescence lifetime of the DNA-Eb complex decreases with a concomitant drop in the steady state fluorescence intensity, without a change in the amount of Eb bound to DNA. It is concluded that unbound Eb, acting via a quenching mechanism, shortens the fluorescence lifetime of bound Eb and consequently decreases the overall fluorescence intensity. This means that a different approach is necessary: time-resolved fluorescence spectroscopy directly distinguishes between a decrease in fluorescence intensity due to quenching by an excess of unbound Eb from that due to a decrease in Eb binding to double-stranded DNA. These studies suggest that techniques which measure total steady state fluorescence intensity of bound Eb in order to infer relative amounts of double-stranded DNA must be interpreted with caution. For such assays to be valid it is essential that no unbound Eb be present; otherwise a variable correction factor is required to account for unbound Eb.     

Fluorescence quenching of serum albumin by rifamycin antibiotics and their analytical application.

In neutral medium, rifamycin antibiotics such as rifapentin (RFPT), rifampicin (RFP), rifandin (RFD) and rifamycin SV (RFSV) can bind with human serum albumin (HSA) and bovine serum albumin (BSA) to form complexes, resulting in the quenching of the intrinsic fluorescence (lambda(ex)/lambda(em) = 285/355 nm) of the BSA and HSA. The quenching intensity (DeltaF) is directly proportional to the concentration of the rifamycin antibiotics. Therefore, a new analytical method was established to determine trace rifamycin antibiotics. The method had fairly high sensitivity and the detecting limits (3sigma) for RFPT, RFP, RFD and RFSV were 0.85, 0.98, 1.83, 1.89 ng/mL, respectively, for the HSA system and 0.76, 0.89, 1.55, 1.77 ng/mL, respectively, for the BSA system. All relative standard deviations (RSDs) were <3.8%. In this work, the characteristics of the fluorescence spectra were studied and the optimum reaction conditions and influencing factors were investigated. The influence of coexisting substances was tested and the results showed that the method had good selectivity and could be applied to determine trace rifamycin antibiotics in medicine capsules and urine samples. Taking the RFSV-serum albumin system as an example, the reaction mechanisms, such as binding constants, binding sites, binding distance and the type of fluorescence quenching, were investigated.     

Steady‐state and time‐resolved fluorescence of tetramethylrhodamine attached to DNA: correlation with DNA sequences

Time‐resolved fluorescence as well as steady‐state absorption and fluorescence were detected in order to study the interactions between tetramethylrhodamine (TAMRA) and DNA when TAMRA was covalently labeled on single‐ and double‐stranded oligonucleotides. Fluorescence intensity quenching and lifetime changes were characterized and correlated with different DNA sequences. The results demonstrated that the photoinduced electron transfer interaction between guanosine residues and TAMRA introduced a short lifetime fluorescence component when guanosine residues were at the TAMRA‐attached terminal of the DNA sequences. The discrepancy of two‐state and three‐state models in previous studies was due to the DNA sequence selection and sensitivity of techniques used to detect the short lifetime component. The results will help the design of fluorescence‐based experiments related to a dye labeled probe. Copyright © 2012 John Wiley & Sons, Ltd.     

白毛黑眼兔眼部虹膜Trp1、Trp2基因克隆与分析

目的 克隆日本大耳白兔白毛黑眼系(白毛黑眼兔)眼部虹膜Trp1、Trp2基因,获取其完整的外显子序列.进一步推测这两个基因编码的蛋白,并分析其特征.方法 从白毛黑眼兔的黑色虹膜组织中提取RNA,并反转录成cDNA.利用来自小鼠、大鼠和人的同源引物,扩增获得白毛黑眼兔Trp1、Trp2基因外显子片段.然后对已知片段进行3' RACE和5'RACE,从而获得白毛黑眼兔Trp1、Trp2基因外显子完整序列.利用相关软件对获得序列进行翻译和分析.结果 首次获得了白毛黑眼兔Trp1、Trp2基因外显子全序列.该实验兔Trp1基因的编码序列全长1604个碱基,其核苷酸序列与人的相似度为87.9％,与小鼠的相似度为82.7％.TRP1成熟蛋白包含513氨基酸,氨基酸序列与人的相似度为89.8％,与小鼠的相似度为86.6％.该实验兔Trp2基因序列全长1554个碱基,其核苷酸序列与人的相似度为83.2％,与小鼠的相似度为81.9％.TRP2成熟蛋白包含494个氨基酸,其序列与人的一致度为84.2％,与小鼠的一致度为84.4％.结论 本研究获得的TRP1、TRP2的序列与已知的家兔酪氨酸相关蛋白家族成员TYR的序列进行比对,结果显示这三种蛋白之间有较高的相似度,并且TRP1和TRP2蛋白序列表现出了酪氨酸酶家族结构上的保守性和特有的结构特征.     

The intrinsic fluorescence of apo-obelin and apo-aequorin and use of its quenching to characterize coelenterazine binding

The intrinsic fluorescence of two apo-photoproteins has been characterized and its concentration-dependent quenching by coelenterazine has been for the first time applied to determine the apparent dissociation constants for coelenterazine binding with apo-aequorin (1.2 ± 0.12 μM) and apo-obelin (0.2 ± 0.04 μM). Stopped-flow measurements of fluorescence quenching showed that coelenterazine binding is a millisecond-scale process, in contrast to the formation of an active photoprotein complex taking several hours. This finding evidently shows that the rate-limiting step of active photoprotein formation is the conversion of coelenterazine into its 2-hydroperoxy derivative.     

Fluorescence quenching method for the determination of carbazochrome sodium sulfonate with aromatic amino acids

In Britton‐Robinson (BR) buffer medium (pH 3.3), carbazochrome sodium sulfonate (CSS) can react with some aromatic amino acids such as tryptophan (Trp), tyrosine (Tyr) and phenylalanine (Phe) to form a 1:1 complex by electrostatic attraction, aromatic stacking interaction and Van der Waals' force, resulting in fluorescence quenching of these amino acids. Maximum quenching wavelengths were located at 352 nm (CSS‐Trp system), 303 nm (CSS‐Tyr system) and 284 nm (CSS‐Phe system), respectively. The fluorescence quenching value (ΔF) was proportional to the concentration of CSS in a certain range. The fluorescence quenching method for the determination of CSS showed high sensitivity, with detection limits of 31.3 ng/mL (CSS‐Trp system), 44.6 ng/mL (CSS‐Tyr system) and 315.0 ng/mL (CSS‐Phe system), respectively. The optimum conditions of the reaction conditions and the effect of coexisting substances were investigated and results showed that the method had good selectivity. The method was successfully applied for the rapid determination of CSS in blood and urine samples. Based on the bimolecular quenching constant K_q, the effect of temperature and Stern‐Volmer plots, this study showed that quenching of fluorescence of amino acids by CSS was a static quenching process. Copyright © 2012 John Wiley & Sons, Ltd.     

Fluorescence quenching method for the determination of bleomycins A5 and A2 with halofluorescein dyes

In weak acidic medium, the anticancer antibiotics bleomycin A₅ (BLMA₅) and bleomycin A₂ (BLMA₂) bind with halofluorescein dyes, such as erythrosin (Ery), eosin Y (EY) and eosin B (EB), to form ion‐association complexes, which causes fluorescence quenching of halofluorescein dyes. The quenching values (ΔF) are directly in proportional to the concentrations of bleomycins over the range 0.09–2.5 µg/mL. Based on this, a fluorescence quenching method for the determination of BLMA₅ and BLMA₂ has been developed. The dynamic range is 0.12–2.5 µg/mL for the determination of BLMA₅ and 0.09–2.0 µg/mL for BLMA₂, with detection limits (3σ) of 0.04 µg/mL for BLMA₅, 0.03 µg/mL for BLMA₂, respectively. It has been applied to determine the two antibiotics in human serum, urine and rabbit serum samples. The recovery is in the range 90–102%. In this work, the optimum reaction conditions and the spectral characteristics of the fluorescence are investigated. The reasons for fluorescence quenching are discussed, based on the fluorescence theory. Copyright © 2007 John Wiley & Sons, Ltd.     

Non-photochemical quenching of Fo in leaves is emission wavelength dependent: consequences for quenching analysis and its interpretation

The effects of light-induced non-photochemical quenching on the minimal F_o, and variable F_v, fluorescence emissions at 690 and 730 nm in leaves were determined. Non-photochemical quenching of F_o, but not F_v, was found to be dependent upon the wavelength of emission, and was greater at 690 nm than at 730 nm. For emission at 730, compared to at 690 nm, approx. 30% of F_o was not affected by non-photochemical quenching processes in leaves of C3 plants; in maize leaves this was found to be approx. 50%. The data indicate that a substantial proportion of the pigments contributing to F_o emission at 730 nm are not quenched by light-induced, non-photochemical quenching processes and that there are large differences in the pigment matrices contributing to F_o and F_v emissions at 730 nm, compared to those at 690 nm. These findings have important implications for the accurate estimation and interpretation of non-photochemical quenching of fluorescence parameters and their use in the calculation of photochemical efficiencies in leaves. Measurements of fluorescence emissions at wavelengths above 700 nm are likely to give rise to significant errors when used for determinations of photochemical and non-photochemical quenching parameters.     

Fluorescence quenching of tryptophan by trifluoroacetamide

Trifluoroacetamide was found to be a good quencher of tryptophan fluorescence, and the quenching was shown to proceed via both a dynamic and a static process. The respective quenching constants were determined by the measurement of the decrease of the fluorescence lifetime in the presence of the quencher. The static and the bimolecular rate quenching constants of N-acetyltryptophanamide are equal to 0.34 1·mol^?1 and 1.9·10⁹ 1·mol^?1·s^?1, respectively. These values indicate that trifluoroacetamide is an efficient quencher of tryptophan fluorescence. This conclusion is also supported by a complete quenching of bovine serum albumin and wheat germ agglutinin fluorescence. In the case of lysozyme, trifluoroacetamide quenches the fluorescence of tryptophan residues which fluoresce with a maximum at 348 nm but not the buried tryptophan residues which fluoresce with a maximum at 333 nm. Trifluoroacetamide quenching of wheat germ agglutinin emission confirms the homogeneity and the high accessibility of emitting tryptophan residues, in agreement with a previous report (Privat, J.P. and Monsigny, M. (1975) Eur. J. Biochem. 60, 555–567). The tryptophan fluorescence decay of wheat germ agglutinin is biexponential even in the presence of the quencher; the static and bimolecular rate quenching constants are equal to 0.22 1·mol^?1 and 092·10⁹ 1·mol^?1·^?1, respectively. In the presence of a specific lectin ligand, the methyldi-N,N′-trifluoroacetyl-β- chitobioside, the quenching of wheat germ agglutinin fluorescence involves a direct contact between tryptophan residues and trifluoroacetamido groups of the ligand and in contrast with the quenching induced by free trifluoroacetamide shows that the tryptophan fluorescence is not fully quenched.