Biodegradation of Aromatic Hydrocarbons in an Extremely Acidic Environment

The potential for biodegradation of aromatic hydrocarbons was evaluated in soil samples recovered along gradients of both contaminant levels and pH values existing downstream of a long-term coal pile storage basin. pH values for areas greatly impacted by runoff from the storage basin were 2.0. Even at such a reduced pH, the indigenous microbial community was metabolically active, showing the ability to oxidize more than 40% of the parent hydrocarbons, naphthalene and toluene, to carbon dioxide and water. Treatment of the soil samples with cycloheximide inhibited mineralization of the aromatic substrates. DNA hybridization analysis indicated that whole-community nucleic acids recovered from these samples did not hybridize with genes, such as nahA, nahG, nahH, todC1C2, and tomA, that encode common enzymes from neutrophilic bacteria. Since these data suggested that the degradation of aromatic compounds may involve a microbial consortium instead of individual acidophilic bacteria, experiments using microorganisms isolated from these samples were initiated. While no defined mixed cultures were able to evolve ¹⁴CO₂ from labeled substrates in these mineralization experiments, an undefined mixed culture including a fungus, a yeast, and several bacteria successfully metabolized approximately 27% of supplied naphthalene after 1 week. This study shows that biodegradation of aromatic hydrocarbons can occur in environments with extremely low pH values.     

Effect of Emulsan on Biodegradation of Crude Oil by Pure and Mixed Bacterial Cultures

Crude oil was treated with purified emulsan, the heteropolysaccharide bioemulsifier produced by Acinetobacter calcoaceticus RAG-1. A mixed bacterial population as well as nine different pure cultures isolated from various sources was tested for biodegradation of emulsan-treated and untreated crude oil. Biodegradation was measured both quantitatively and qualitatively. Recovery of ¹⁴CO₂ from mineralized ¹⁴C-labeled substrates yielded quantitative data on degradation of specific compounds, and capillary gas chromatography of residual unlabeled oil yielded qualitative data on a broad spectrum of crude oil components. Biodegradation of linear alkanes and other saturated hydrocarbons, both by pure cultures and by the mixed population, was reduced some 50 to 90% after emulsan pretreatment. In addition, degradation of aromatic compounds by the mixed population was reduced some 90% in emulsan-treated oil. In sharp contrast, aromatic biodegradation by pure cultures was either unaffected or slightly stimulated by emulsification of the oil.     

Characterization of Ligninolytic Bacteria and Analysis of Alkali-Lignin Biodegradation Products

Ligninolytic bacteria degrading lignin were isolates and identified, and their biodegradation mechanism of alkaline-lignin was investigated. Four strains with lignin degradation capability were screened and identified from the soil, straw, and silage based on their decolorizing capacity of aniline blue and colony size on alkaline-lignin medium. The degradation ratio of Bacillus aryabhattai BY5, Acinetobacter johnsonii LN2, Acinetobacter lwoffii LN4, and Micrococcus yunnanensis CL32 have been assayed using alkaline-lignin as the unique carbon source. Further, the Lip (lignin peroxidase) and Mnp (manganese peroxidase) activities of strains were investigated. Lip activity of A. lwoffii LN4 was highest after 72 h of incubation and reached 7151.7 U · l^–1. Mnp activity of M. yunnanensis CL32 was highest after 48 h and reached 12533 U · l^–1. The analysis of alkaline-lignin degradation products by GC-MS revealed that the strains screened could utilize aromatic esters compounds such as dibutyl phthalate (DBP), and decomposite monocyclic aromatic compounds through the DBP aerobic metabolic pathway. The results indicate that B. aryabhattai BY5, A. johnsonii LN2, A. lwoffii LN4, and M. yunnanensis CL32 have high potential to degrade alkaline-lignin, and might utilize aromatic compounds by DBP aerobic metabolic pathway in the process of lignin degradation.Key words: isolation, bacteria, alkali-lignin, biodegradation products     

Design of bacterial defined mixed cultures for biodegradation of specific crude oil fractions, using population dynamics analysis by DGGE

Hydrocarbon-degrading bacteria isolated from oil-polluted soils, were used to design three defined mixed cultures (DMC) for biodegradation of Maya crude oil fractions. The first degrading culture, DMC A was made up with 10 strains. Design of DMC B (six strains) and DMC C (three strains) was based on DGGE profiles obtained throughout biodegradation assays of different petroleum fractions. Biodegradation of the aliphatic fraction (10 000 mg l⁻¹) and an aromatic–polar mixture (5000 mg l⁻¹) was evaluated for the DMC B. Biodegradation of total hydrocarbons (10 000 mg l⁻¹) and its fractions was evaluated for DMC B and DMC C. During biodegradation assays, O₂ consumption and CO₂ production were assessed by respirometry, while population dynamics of predominant strains was based on PCR-DGGE profiles of partial 16S rDNA. Aliphatic fraction was completely biodegraded by DMC B, while degradation of the aromatic–polar mixture was 12.5% and for total hydrocarbons 40.5%. DMC B was able to degrade the aromatic fraction (31%) and even the polar fraction (19.6%) present in total hydrocarbons. DMC C degraded the aromatic and polar fractions (5.6% and 2%, respectively) present in total hydrocarbons. DGGE profiles of the DMCs indicated that Pseudomonas sp., Gordonia rubripertincta and a non-identified strain were predominant and probably responsible of the hydrocarbons biodegradation. The use of DGGE-fingerprinting to track microbial populations, allowed selecting strains to design efficient oil-degrading defined mixed cultures.     

Bioremediation of oil-polluted soil with an association including the fungus Pleurotus ostreatus and soil microflora

The possibility of application of the Pleurotus ostreatus D1-soil microflora to bioremediation of oil-polluted soils was studied. The fungus degraded mainly the aromatic fractions, whereas soil microflora intensely degraded paraffin and naphthene oil fractions. Introduction of the fungus Pleurotus ostreatus D1 to soil induces degradation of a wider range of oil hydrocarbons. It is reasonable to further investigate the discovered phenomenon in order to improve procedures of remediation of oil-polluted soils.     

Community dynamics of a mixed-bacterial culture growing on petroleum hydrocarbons in batch culture

The effects of various hydrocarbon substrates, and a chemical surfactant capable of enhancing crude-oil biodegradation, on the community structure of a mixed-bacterial inoculum were examined in batch culture. Of 1000 TSA-culturable isolates, 68.6% were identified at the genus level or better by phospholipid fatty acid analysis over 7-day time course experiments. Cultures were exposed to 20 g/L Bow River crude oil with and without 0.625 g/L Igepal CO-630 (a nonylphenol ethoxylate surfactant), 5 g/L saturates, 5 g/L aromatics, or 125 g/L refinery sludge. A group of six genera dominated the cultures: Acinetobacter, Alcaligenes, Ochrobactrum, Pseudomonas/Flavimonas, Stenotrophomonas, and Yersinia. Species from four of the genera were shown to be capable of hydrocarbon degradation, and counts of hydrocarbon degrading and total heterotrophic bacteria over time were nearly identical. Pseudomonas/Flavimonas and Stenotrophomonas normally dominated during the early portions of cultures, although the lag phase of Stenotrophomonas appears to have been increased by surfactant addition. Acinetobacter calcoaceticus was the most frequently isolated microorganism during exposure to the saturate fraction of crude oil. Regardless of substrate, the culture medium supported a greater variety of organisms during the latter portions of cultures. Understanding the community structure and dynamics of mixed bacterial cultures involved in treatment of heterogeneous waste substrates may assist in process development and optimization studies.     

Evaluation of Inoculum Addition To Stimulate In Situ Bioremediation of Oily-Sludge-Contaminated Soil

A full-scale study evaluating an inoculum addition to stimulate in situ bioremediation of oily-sludge-contaminated soil was conducted at an oil refinery where the indigenous population of hydrocarbon-degrading bacteria in the soil was very low (10³ to 10⁴ CFU/g of soil). A feasibility study was conducted prior to the full-scale bioremediation study. In this feasibility study, out of six treatments, the application of a bacterial consortium and nutrients resulted in maximum biodegradation of total petroleum hydrocarbon (TPH) in 120 days. Therefore, this treatment was selected for the full-scale study. In the full-scale study, plots A and B were treated with a bacterial consortium and nutrients, which resulted in 92.0 and 89.7% removal of TPH, respectively, in 1 year, compared to 14.0% removal of TPH in the control plot C. In plot A, the alkane fraction of TPH was reduced by 94.2%, the aromatic fraction of TPH was reduced by 91.9%, and NSO (nitrogen-, sulfur-, and oxygen-containing compound) and asphaltene fractions of TPH were reduced by 85.2% in 1 year. Similarly, in plot B the degradation of alkane, aromatic, and NSO plus asphaltene fractions of TPH was 95.1, 94.8, and 63.5%, respectively, in 345 days. However, in plot C, removal of alkane (17.3%), aromatic (12.9%), and NSO plus asphaltene (5.8%) fractions was much less. The population of introduced Acinetobacter baumannii strains in plots A and B was stable even after 1 year. Physical and chemical properties of the soil at the bioremediation site improved significantly in 1 year.     

Distribution and biodegradation potential of oil-degrading bacteria in North Eastern Japanese coastal waters

Abstract The distribution of oil-degrading microorganism in samples of surface water and sediment from North Eastern Japanese coastal waters was studied. Modified natural sea water (NSW) agar supplemented with emulsified crude oil (Arabian light, 5 g 1⁻¹) was used to enumerate oil-degrading bacteria. In addition, filtered samples were inoculated into NSW broth containing weathered crude oil. Incubation was carried out at 20°C for 7–10 days. Populations of oil-degrading microorganisms ranged from 3–230 CFU 100 ml⁻¹ in surface waters and 2.9 × 10³ to 1.2 × 10⁵ CFU g⁻ in sediment samples. Analysis of variance showed that oil-degraders were heterogenously distributed. Six mixed populations selected from 20 samples were studied to determine which of the constituent microflora were capable of crude oil biodegradation. Among 51 strains selected for identification, only 61% could be identified which formed 17 different bacterial species. Acinetobacter species (14 strains), Psychrobacter immobilis (9 strains) and Gram-positive cocci (10 strains) were the predominant types. Oil-degrading activity by various mixed populations (three each from water and sediment samples) was determined by using a conventional total weight reduction technique. Reduction in amount of various aliphatic and aromatic hydrocarbon substrates was verified using gas chromatography and high pressure liquid chromatography. Biodegradation of crude oil ranged from 35–58%. One mixed population of the sediment samples degraded more hydrocarbon (both aliphatic and aromatic) and the biodegradation of the aromatic hydrocarbon reached as high as 48%.     

Use of bacteria-immobilized cotton fibers to absorb and degrade crude oil

Using enrichment culture technique, two isolates that brought a significant degradation and dispersion of crude oil were obtained from contaminated sediments of the Bohai Bay, China. 16S rRNA gene sequencing and phylogenetic analysis indicated that the two bacterial strains affiliated with the genera Vibrio and Acinetobacter. Subsequently, the bacterial cells were immobilized on the surface of cotton fibers. Cotton fibers were used as crude oil sorbent as well as a biocarrier for bacteria immobilization. Among the two isolates, the marine bacteria Acinetobacter sp. HC8-3S showed a strong binding to the cotton fibers, possibly enhanced through extracellular dispersant excreted by Acinetobacter sp. HC8-3S. Both planktonic and immobilized bacteria showed relatively high biodegradation (>60%) of saturated hydrocarbons fraction of crude oil, in the pH range of 5.6–8.6. The degradation activities of planktonic and immobilized bacteria were not affected significantly when the NaCl concentration reached 70 g/L. The immobilized bacterial cells exhibited an enhanced biodegradation of crude oil. The efficiency of saturated hydrocarbons degradation by the immobilized bacterial cells increased about 30% compared to the planktonic bacterial cells.     

Characterization of beta-ketoadipate pathway from multi-drug resistance bacterium, Acinetobacter baumannii DU202 by proteomic approach

In this study, the biodegradative activities of monocyclic aromatic compounds were determined from the multi-drug resistant (MDR) Acinetobacter baumannii, which were studied in the form of clinical isolates from a hospital in Korea. These bacteria were capable of biodegrading monocyclic aromatic compounds, such as benzoate and p-hydroxybenzoate. In order to determine which pathways are available for biodegradation in these stains, we conducted proteome analyses of benzoate and p-hydroxybenzoate-cultured A. baumannii DU202, using 2-DE/MS analysis. As genome DB of A. baumannii was not yet available, MS/MS analysis or de novo sequencing methods were employed in the identification of induced proteins. Benzoate branch enzymes [catechol 1,2-dioxygenase (CatA) and benzoate dioxygenase alpha subunit (BenA)] of the beta-ketoadipate pathway were identified under benzoate culture condition and p-hydroxybenzoate branch enzymes [protocatechuate 3,4-dioxygenase alpha subunit (PcaG) and 3-carboxy-cis,cis-muconate cycloisomerase (PcaB)] of the beta-ketoadipate pathway were identified under p-hydroxybenzoate culture condition, respectively, thereby suggesting that strain DU202 utilized the beta-ketoadipate pathway for the biodegradation of monocyclic aromatic compounds. The sequence analysis of two purified dioxygenases (CatA and PcaGH) indicated that CatA is closely associated with the CatA of Acinetobacter radiresistance, but PcaGH is only moderately associated with the PcaGH of Acinetobacter sp. ADP1. Interestingly, the fused form of PcaD and PcaC, carboxymuconolactone decarboxylase (PcaCD), was detected on benzoate-cultured A. baumannii DU202. These results indicate that A. baumannii DU202 exploits a different beta-ketoadipate pathway from other Acinetobacter species.     

Utilization of monocyclic aromatic hydrocarbons individually and in mixture by bacteria isolated from petroleum-contaminated soil

The fate of benzene, ethylbenzene, toluene, xylenes (BTEX) compounds through biodegradation was investigated using two different bacteria, Ralstonia picketti (BP-20) and Alcaligenes piechaudii (CZOR L-1B). These bacteria were isolated from extremely polluted soils contaminated with petroleum hydrocarbons. PCR and Fatty Acid Methyl Ester (FAME) were used to identify the isolates. In this study, BTEX biodegradation, applied as a mixture or as individual compounds by the bacteria was evaluated. Both bacteria were shown to degrade each of the BTEX compounds individually and in mixture. However, Alcaligenes piechaudii was a better degrader of BTEXs both in the mixture and individually. Differences between BTEX biodegradation in the mixture and individually were observed, especially in the case of benzene. The degradation of all BTEXs in the mixture was lower than the degradation of individual compounds for both bacteria tested. In the all experiments, toluene and m + p- xylenes were better removed than the other BTEXs. No intermediates of biodegradation were detected. Biosurfactant production was observed by culture techniques. In addition, 3-hydroxy fatty acids, important in biosurfactant production, were observed by FAME analysis. The test results indicate that the bacteria could contribute to bioremediation of aromatic hydrocarbon pollution.     

Influence of chemical surfactants on the biodegradation of crude oil by a mixed bacterial culture.

The effects of surfactant physicochemical properties, such as the hydrophile-lipophile balance (HLB) and molecular structure, on the biodegradation of 2% w/v Bow River crude oil by a mixed-bacterial culture were examined. Viable counts increased 4.6-fold and total petroleum hydrocarbon (TPH) biodegradation increased 57% in the presence of Igepal CO-630, a nonylphenol ethoxylate (HLB 13, 0.625 g/L). Only the nonylphenol ethoxylate with an HLB value of 13 substantially enhanced biodegradation. The surfactants from other chemical classes with HLB values of 13 (0.625 g/L) had no effect or were inhibitory. TPH biodegradation enhancement by Igepal CO-630 occurred at concentrations above the critical micelle concentration. When the effect of surfactant on individual oil fractions was examined, the biodegradation enhancement for the saturate and aromatic fractions was the same. In all cases, biodegradation resulted in increased resin and asphaltene concentrations. Optimal surfactant concentrations for TPH biodegradation reduced resin and asphaltene formation. Chemical surfactants have the potential to improve crude oil biodegradation in complex microbial systems, and surfactant selection should consider factors such as molecular structure, HLB, and surfactant concentration.     

Use of 13C Nuclear Magnetic Resonance To Assess Fossil Fuel Biodegradation: Fate of [1-13C]Acenaphthene in Creosote Polycyclic Aromatic Compound Mixtures Degraded by Bacteria

[1-¹³C]acenaphthene, a tracer compound with a nuclear magnetic resonance (NMR)-active nucleus at the C-1 position, has been employed in conjunction with a standard broad-band-decoupled ¹³C-NMR spectroscopy technique to study the biodegradation of acenaphthene by various bacterial cultures degrading aromatic hydrocarbons of creosote. Site-specific labeling at the benzylic position of acenaphthene allows ¹³C-NMR detection of chemical changes due to initial oxidations catalyzed by bacterial enzymes of aromatic hydrocarbon catabolism. Biodegradation of [1-¹³C]acenaphthene in the presence of naphthalene or creosote polycyclic aromatic compounds (PACs) was examined with an undefined mixed bacterial culture (established by enrichment on creosote PACs) and with isolates of individual naphthalene- and phenanthrene-degrading strains from this culture. From ¹³C-NMR spectra of extractable materials obtained in time course biodegradation experiments under optimized conditions, a number of signals were assigned to accumulated products such as 1-acenaphthenol, 1-acenaphthenone, acenaphthene-1,2-diol and naphthalene 1,8-dicarboxylic acid, formed by benzylic oxidation of acenaphthene and subsequent reactions. Limited degradation of acenaphthene could be attributed to its oxidation by naphthalene 1,2-dioxygenase or related dioxygenases, indicative of certain limitations of the undefined mixed culture with respect to acenaphthene catabolism. Coinoculation of the mixed culture with cells of acenaphthene-grown strain Pseudomonas sp. strain A2279 mitigated the accumulation of partial transformation products and resulted in more complete degradation of acenaphthene. This study demonstrates the value of the stable isotope labeling approach and its ability to reveal incomplete mineralization even when as little as 2 to 3% of the substrate is incompletely oxidized, yielding products of partial transformation. The approach outlined may prove useful in assessing bioremediation performance.     

Genome Sequence Analysis of the Naphthenic Acid Degrading and Metal Resistant Bacterium Cupriavidus gilardii CR3

Cupriavidus sp. are generally heavy metal tolerant bacteria with the ability to degrade a variety of aromatic hydrocarbon compounds, although the degradation pathways and substrate versatilities remain largely unknown. Here we studied the bacterium Cupriavidus gilardii strain CR3, which was isolated from a natural asphalt deposit, and which was shown to utilize naphthenic acids as a sole carbon source. Genome sequencing of C. gilardii CR3 was carried out to elucidate possible mechanisms for the naphthenic acid biodegradation. The genome of C. gilardii CR3 was composed of two circular chromosomes chr1 and chr2 of respectively 3,539,530 bp and 2,039,213 bp in size. The genome for strain CR3 encoded 4,502 putative protein-coding genes, 59 tRNA genes, and many other non-coding genes. Many genes were associated with xenobiotic biodegradation and metal resistance functions. Pathway prediction for degradation of cyclohexanecarboxylic acid, a representative naphthenic acid, suggested that naphthenic acid undergoes initial ring-cleavage, after which the ring fission products can be degraded via several plausible degradation pathways including a mechanism similar to that used for fatty acid oxidation. The final metabolic products of these pathways are unstable or volatile compounds that were not toxic to CR3. Strain CR3 was also shown to have tolerance to at least 10 heavy metals, which was mainly achieved by self-detoxification through ion efflux, metal-complexation and metal-reduction, and a powerful DNA self-repair mechanism. Our genomic analysis suggests that CR3 is well adapted to survive the harsh environment in natural asphalts containing naphthenic acids and high concentrations of heavy metals.     

Proteogenomic Characterization of Monocyclic Aromatic Hydrocarbon Degradation Pathways in the Aniline-Degrading Bacterium Burkholderia sp. K24

Burkholderia sp. K24, formerly known as Acinetobacter lwoffii K24, is a soil bacterium capable of utilizing aniline as its sole carbon and nitrogen source. Genomic sequence analysis revealed that this bacterium possesses putative gene clusters for biodegradation of various monocyclic aromatic hydrocarbons (MAHs), including benzene, toluene, and xylene (BTX), as well as aniline. We verified the proposed MAH biodegradation pathways by dioxygenase activity assays, RT-PCR, and LC/MS-based quantitative proteomic analyses. This proteogenomic approach revealed four independent degradation pathways, all converging into the citric acid cycle. Aniline and p-hydroxybenzoate degradation pathways converged into the β-ketoadipate pathway. Benzoate and toluene were degraded through the benzoyl-CoA degradation pathway. The xylene isomers, i.e., o-, m-, and p-xylene, were degraded via the extradiol cleavage pathways. Salicylate was degraded through the gentisate degradation pathway. Our results show that Burkholderia sp. K24 possesses versatile biodegradation pathways, which may be employed for efficient bioremediation of aniline and BTX.     

基于吐温-80下2株功能菌协同降解多环芳烃的特性研究

【目的】研究恶臭假单胞菌B6-2和克雷伯氏菌CW-D3T构建的混合功能菌对多环芳烃的协同修复效能,并探究非离子表面活性剂吐温-80对混菌降解多环芳烃的影响,以期为芳烃化合物的生物修复提供技术参考和理论依据。【方法】通过生长曲线及平板菌落计数法反映混菌生长情况及比例,从而评估混菌降解体系的可行性;通过高效液相色谱法探究各体系以及不同吐温-80浓度下混培体系对多环芳烃的降解效能;最后通过烷烃吸附法测定细胞表面疏水性,以探究吐温-80对混合功能菌降解多环芳烃的影响机制。【结果】等比例混合的2株菌共培养生长状态优于纯培体系,对混合多环芳烃(菲、荧蒽、芘)的降解率分别为33.4%、30.1%、28.6%(7 d),相较于菌CW-D3T,分别提高了1.31倍、1.46倍、1.42倍。混培体系中加入500 mg/L的吐温-80对菲、荧蒽、芘的降解率分别为47.7%、43.2%、38.8%(7 d),相较于对照组各提高了1.55倍、1.38倍、1.31倍,而更高浓度的吐温-80无明显促进作用或轻微抑制。添加吐温-80使菌CW-D3T和混菌的表面疏水性提高,而菌B6-2表面疏水性降低。结合细菌生长量分析...     

不动杆菌属(Acinetobacter)细菌降解石油烃的研究进展

不动杆菌属细菌分布广泛,作为重要的石油烃降解者,在乳化和降解石油烃、降低石油烃生物毒性等方面有重要作用。本文概述了不动杆菌属细菌对烷烃、芳香烃等石油烃组分的降解,总结了该属细菌中已发现的烷烃氧化酶和芳香烃氧化酶,综述了该属细菌所分泌的表面活性剂的类型和乳化机理,讨论了固定化对该属细菌降解石油烃的影响,展望了该属细菌降解石油烃的应用前景。基于此,作者认为探索不动杆菌属细菌降解石油烃的详细机理和途径、发现关键酶、寻找遗传工具、构建基因工程菌、发掘环境友好的固定化材料,应是未来的研究重点及热点。     

Biodegradation of sodium sulfite liquor (NaSSL) and sodium lignosulfonate (NaLS) by a mixed culture of microorganisms

Summary In this work we discuss the aerobic biodegradation of sodium sulfite liquor of (NaSSL) and sodium lignosulfonate (NaLS) in a firwood sulfite waste liquor by a mixed culture of microorganisms consisting of two Trichosporon yeasts and bacteria in the Arthrobacter (two species), Pseudomonas and Chromabacterium genera. Under established process parameters, the NaSSL was biodegradated in one or two stages by mixed cultures. The kinetics in each stage was studied. The optimal ratio of NaLS and sugars in the substrate for the growth of mixed culture was determined. The growth of the monocultures of the bacteria on the NaLS and the growth of the yeasts as monocultures on the NaSSL substrate were examined. UV absorption and IR spectra were employed as analytical methods to follow the microbial degradation of NaLS. The aim of this research was to study the biodegradation process and kinetics and to remove by means of mixed culture the maximum amount of organic matter from NaSSL.     

Degradation of Mineral Oil with a Strain of Acinetobacter calcoaceticus

The Acinetobacter calcoaceticusstrain TM-31 has been isolated from a microbial assemblage of a pilot plant that purifies waste water polluted with mineral oil. This strain is capable of efficient degradation of components of mineral oil (alkanes, isoalkanes, and alkyl residues of the naphthene and arene fraction). The strain bears stably inherited plasmids of sizes 120, 9, and 8 kb, which can be transferred into plasmid-free cells of the parental strain and into bacteria of the genusPseudomonasand ensure the degradation of hexadecane and mineral oil.     

Degradation of Polycyclic Aromatic Hydrocarbons at Low Temperature under Aerobic and Nitrate-Reducing Conditions in Enrichment Cultures from Northern Soils

The potential for biodegradation of polycyclic aromatic hydrocarbons (PAHs) at low temperature and under anaerobic conditions is not well understood, but such biodegradation would be very useful for remediation of polluted sites. Biodegradation of a mixture of 11 different PAHs with two to five aromatic rings, each at a concentration of 10 μg/ml, was studied in enrichment cultures inoculated with samples of four northern soils. Under aerobic conditions, low temperature severely limited PAH biodegradation. After 90 days, aerobic cultures at 20°C removed 52 to 88% of the PAHs. The most extensive PAH degradation under aerobic conditions at 7°C, 53% removal, occurred in a culture from creosote-contaminated soil. Low temperature did not substantially limit PAH biodegradation under nitrate-reducing conditions. Under nitrate-reducing conditions, naphthalene, 2-methylnaphthalene, fluorene, and phenanthrene were degraded. The most extensive PAH degradation under nitrate-reducing conditions at 7°C, 39% removal, occurred in a culture from fuel-contaminated Arctic soil. In separate transfer cultures from the above Arctic soil, incubated anaerobically at 7°C, removal of 2-methylnaphthalene and fluorene was stoichiometrically coupled to nitrate removal. Ribosomal intergenic spacer analysis suggested that enrichment resulted in a few predominant bacterial populations, including members of the genera Acidovorax, Bordetella, Pseudomonas, Sphingomonas, and Variovorax. Predominant populations from different soils often included phylotypes with nearly identical partial 16S rRNA gene sequences (i.e., same genus) but never included phylotypes with identical ribosomal intergenic spacers (i.e., different species or subspecies). The composition of the enriched communities appeared to be more affected by presence of oxygen, than by temperature or source of the inoculum.