Relationship between the distribution of the chain length of amylopectin and the crystalline structure of starch granules

The distributions of chain lengths in the amylopectins of starches from 20 species (11 A-, 6 B-, and 3 C-type) were characterised by h.p.l.c. in terms of the relationship between the molecular structure of the amylopectin and the crystalline structure of the starch granule. The weight-average chain-lengths of the amylopectins of the A-, B-, and C-type starches were in the ranges 23–29, 30–44, and 26–29, respectively. Gel-permeation chromatograms of the amylopectins debranched with isoamylase showed bimodal distributions of fractions containing long and short chains for 17 specimens (including corn, rice, potato, etc.) and trimodal distributions, of which the fraction containing short chains had twin peaks, for wheat, tapioca, and tulip amylopectins. The correlation coefficients between the average chain-lengths of amylopectins and the fractions of long and short chains and the ratio of the fractions of short and long chains by weight were 0.90, 0.69, and ?0.95, respectively. In general, amylopectin molecules of A-type starches have shorter chains in both the long- and short-chain fractions and larger amounts of the short-chain fractions than those of the B-type starches. The chain lengths of amylopectins of the C-type starches were intermediate and it is inferred that these starches possibly yield any type of crystalline structure depending on the environmental temperature and other factors, whereas the A- and B-type starches are insensitive to temperature.     

Amylopectin molecular structure reflected in macromolecular organization of granular starch

For lintners with negligible amylose retrogradation, crystallinity related inversely to starch amylose content and, irrespective of starch source, incomplete removal of amorphous material was shown. The latter was more pronounced for B-type than for A-type starches. The two predominant lintner populations, with modal degrees of polymerization (DP) of 13-15 and 23-27, were best resolved for amylose-deficient and A-type starches. Results indicate a more specific hydrolysis of amorphous lamellae in such starches. Small-angle X-ray scattering showed a more intense 9-nm scattering peak for native amylose-deficient A-type starches than for their regular or B-type analogues. The experimental evidence indicates a lower contrasting density within the "crystalline" shells of the latter starches. A higher density in the amorphous lamellae, envisaged by the lamellar helical model, explains the relative acid resistance of linear amylopectin chains with DP > 20, observed in lintners of B-type starches. Because amylopectin chain length distributions were similar for regular and amylose-deficient starches of the same crystal type, we deduce that the more dense (and ordered) packing of double helices into lamellar structures in amylose-deficient starches is due to a different amylopectin branching pattern.     

Examination of the structure of amylopectin molecules by fluorescent labeling

Amylopectin molecules from rice, maize, sweet potato and potato were examined by fluorescent labeling followed by gel-permeation HPLC. The number-average degree of polymerization (dp(n)) was determined to be in range of 9600-15,900. The molar-based distribution revealed the presence of three molecular species, large (dp(n) 13,400-26,500), medium (4400-8400) and small (700-2100). Their molar proportions differed by plant origin. The large species was a major component (43-63% by mole). A relatively large amount of the medium (16-28% by mole) and small (19-38%) species was found although their weight proportion was small (8-15, 1-4%, respectively). The three species from waxy rice amylopectin had a similar chain-length distribution and also a similar size-distribution of C chains. These results suggested that the three species were basically similar in cluster structure but different in number of clusters per molecule.     

Relationship between branching density and crystalline structure of A- and B-type maize mutant starches

Amylopectin from two double maize mutant starches of A-crystalline (wxdu) and B-crystalline type (aewx) was subjected successively to hydrolysis involving alpha and beta amylases, which isolated clusters and all branching zones of clusters (BZC). Enzymatic analysis together with ionic and size-exclusion chromatography revealed the structural features of the clusters and BZC and their role in starch crystallization. A-type clusters were larger (dp(n) > 80) and contained more (but shorter) chains than B-type clusters. The BZC of A-type starch was also larger, but with a shorter distance between the branching points than in B-type BZC. A-type clusters had a densely packed structure and B-type a poorly branched structure. Models for the structure of A- and B-type clusters are presented, and a hypothesis for the influence of cluster geometry on crystallization is proposed.     

SANS study of the distribution of water within starch granules

This study describes contrast variation small angle neutron scattering (SANS) experiments which focus on the role which the intra-granular room temperature distribution of water and carbohydrate plays in determining the native structure and subsequent functionality of starch. It is shown that variations in botanical origin and amylose content do not correlate with significant differences in room temperature composition of A-type starch granules. In turn, variations in the gelatinisation behaviour of A-type starches do not correlate with variations in room temperature water distribution. In contrast, the room temperature water content is found to differ significantly between granules of potato (B-type) and a range of A-type starch cultivars. A correlation is found between these compositional differences and variations in crystal structure, which has implications for biological growth conditions and gelatinisation behaviour.     

Molecular structure of amylopectin from Amaranth starch and its effect on physicochemical properties

The molecular structure of amylopectin and its varphi,beta-limit dextrins from starch of 13 amaranth cultivars was determined by HPAEC-PAD after debranching. Chain length profiles of amylopectins showed bimodal distributions. The molar-based ratios of the average chain lengths of amylopectins (CLap) ranged from 17.41 to 18.22. The molar-based average chain lengths (CLld) and average B-chain lengths (BCLld) of varphi,beta-limit dextrins varied from 7.68 to 8.05, and from 14.10 to 14.73, respectively. Correlation analysis indicated that most structural parameters were positively correlated with thermal properties with few exceptions, whereas the content of fraction fa' ("'" stands for molar-based chain length ratio) was negatively correlated with the thermal properties. Pasting properties of cold paste viscosity (CPV) and setback were also correlated with amylopectin structural parameters.     

Starch crystal solubility and starch granule gelatinisation

The solubility and dissolution behaviour of A- and B-type crystals of short chain amylose were measured both directly and using differential scanning calorimetry in the temperature range 30-110 degrees C. Dissolution in the calorimeter was affected by super-heating to the extent of 24-28 degrees C. Following trends previously found by calorimetry the B-type crystal polymorph was more soluble than the A-type. Analysis of the chain composition of the dissolved material revealed a preferential solubilisation of the short chains at the lower temperatures. The solubility of both crystal polymorphs and the magnitude of the preferential solubilisation effect was reduced in the presence of 30% w/w sucrose. A comparison of calorimetric measurements of crystal dissolution and the gelatinisation of native granular waxy maize and potato starches found some broad similarities, such as transition temperatures and their composition dependence, and some differences, such as the relatively narrow temperature range of granular gelatinisation, which reflects its cooperative nature.     

Structural studies of starches with different water contents

The proportion of double helices in starches from a series of pea [rb, rug4-b, rug3-a, and lam-c mutants, and the wild type (WT) parental line], potato and maize (normal and low amylose), and wheat (normal) lines, ranged from about 30-50% on a dry weight basis. In relatively dry starch powders, only about half of the double helices were in crystalline order, this proportion being higher for A-type than for B-type starches. Using starch from WT pea as an example, it was found that increasing water content results in an increase in total crystallinity. When the water content was raised to a level similar to that in excess water, the proportion of crystallinity was close to the proportion of double helices (DH). Measuring crystallinity in starches with a high water content is difficult using traditional methods such as x-ray diffraction. A method was developed, therefore, for determining starch structural characteristics in excess water by measuring the enthalpy of gelatinization transition in quasi-equilibrium differential scanning calorimetry (DSC) experiments. It is suggested that DH% = DeltaH(sp)/DeltaH(DH) x 100%, where DeltaH(sp) and DeltaH(DH) represent the specific enthalpies of gelatinisation transition, DeltaH(sp) being measured as J/g dry starch weight and DeltaH(DH) as J/g DH, in starch. Studies on potato and maize starches in excess water and in 0.6M KCl showed, respectively, that DeltaH(DH) was 36.3 and 35.6 J/g for B-type polymorphs and 33.0 and 35.0 J/g for A-type polymorphs. For C-type starches, such as those from pea, intermediate values of DeltaH(DH), related to the proportions A-/B-polymorphs, should be used. The type of crystallinity in starch can be determined by the shift in peak temperature for thermograms in excess water and in excess 0.6M KCl. For B-polymorphs this shift was found to be approximately 2-3 degrees C and for A-polymorphs approximately 7-12 degrees C. The ratio between ordered areas with both A- and B-polymorphs can be determined from the enthalpies of disruption of each area. These enthalpies can be obtained by deconvolution of bimodal thermograms produced by C-type starches in excess 0.6M KCl. This methodical approach can be applied to all starches that give a sharp gelatinisation thermogram in excess water. Using a range of methods, including DSC, it was found that starch granules from the mutant peas are constructed in a similar way to those from the WT, with B-polymorphs in the centre and A-polymorphs at the periphery of all granules. The proportion of A/B-polymorphs, however, differed between the mutants. It was found that in addition to increasing the total crystallinity, increasing the water content within the granules also resulted in an increase in the proportion of B-polymorphs.     

Effects of annealing on the polymorphic structure of starches from sweet potatoes (Ayamurasaki and Sunnyred cultivars) grown at various soil temperatures

Starches extracted from the sweet potato cultivars Sunnyred and Ayamurasaki grown at 15 or 33 degrees C (soil temperature) were annealed in excess water (3 mg starch/mL water) for different times (1, 4, 8 or 10h) at the temperatures 2-3 degrees K below the onset melting temperature. The structures of annealed starches, as well as their gelatinisation (melting) properties, were studied using high-sensitivity differential scanning calorimetry (HSDSC). In excess water, the single endothermic peak shifted to higher temperatures, while the melting (gelatinisation) enthalpy changed only very slightly, if any. The elevation of gelatinisation temperature was associated with increasing order/thickness of the crystalline lamellae. The only DSC endotherm identified in 0.6 M KCl for Sunnyred starch grown at 33 degrees C was attributed to A-type polymorphic structure. The multiple endothermic forms observed by DSC performed in 0.6M KCl for annealed starches from both cultivars grown at 15 degrees C provided evidence of a complex C-type (A- plus B-type) polymorphic structure of crystalline lamellae. The A:B-ratio of two polymorphic forms increased upon annealing due to partial transformation of B- to A-polymorph, which was time dependent. Long heating periods facilitated the maximal transformation of B- to A-polymorph associated with limited A:B ratio.     

Structural basis for the slow digestion property of native cereal starches

Native cereal starches are ideal slowly digestible starches (SDS), and the structural basis for their slow digestion property was investigated. The shape, size, surface pores and channels, and degree of crystallinity of starch granules were not related to the proportion of SDS, while semicrystalline structure was critical to the slow digestion property as evidenced by loss of SDS after cooking. The high proportion of SDS in cereal starches, as compared to potato starch, was related to their A-type crystalline structure with a lower degree of perfection as indicated by a higher amount of shortest A chains with a degree of polymerization (DP) of 5-10. The A-type amorphous lamellae, an important component of crystalline regions of native cereal starches, also affect the amount of SDS as shown by a reduction of SDS in lintnerized maize starches. These observations demonstrate that the supramolecular A-type crystalline structure, including the distribution and perfection of crystalline regions (both crystalline and amorphous lamellae), determines the slow digestion property of native cereal starches.     

Origins of B-type crystallinity in glycerol-plasticised, compression-moulded potato starches

The amount of B-type crystallinity in compression-moulded, glycerol-plasticised potato starches was strongly dependent on both the properties of the potato starch used and the applied processing conditions. The presence of amylose and the morphology of the potato starch used, but also processing parameters such as moulding temperature and water content during moulding affected the amount of B-type crystallinity in the materials and thus the ultimate mechanical properties of the plasticised starches. This indicated that the direct relation between composition and physical properties of processed starches is not always valid; processing parameters are important tools for controlling the physical properties of processed starches as they influence the amount of B-type crystallinity in the material. It was shown that the total amount of B-type crystallinity in the glycerol-plasticised potato starches should be considered as a summation of residual amylopectin crystallinity and recrystallisation of both amylose and amylopectin, being strongly dependent on the applied processing conditions. In order to explain the observed amount of B-type crystallinity in these starches, partial (co-)crystallisation of both amylose and amylopectin should occur at high moulding temperatures. The measured mechanical properties of the plasticised potato starches correlated well with the amount of B-type crystallinity observed in the materials.     

Pisum sativum and vicia faba carbohydrates: Part IV — Granular structure of wrinkled pea starch

The granular structure of wrinkled pea starch, compared to two other B-type starches, potato and amylomaize, has been studied, using physical, chemical and enzymic methods both before and after lintnerisation (2·2n HCl, 35°C). Wrinkled pea starch, which was composed mainly (90%) of compound granules, had an apparent amylose content of 75·4% when measured at +2°C. Native granules showed weak B-type crystallinity. The fraction (27·4%) which was easily degraded during lintnerisation and which corresponded to the amorphous phase, was smaller than for other starches. The degradation rate of the more organised phase was low (6% in 17 days). The residue remaining after exposure to acid for 42 days presented a very high, B-type crystallinity but with the same sorption properties as native starch, which indicates that water is part of the crystallites. The crystalline phase is composed of linear chains of $\text{DP}$ 25, distributed asymmetrically. The native starch showed a single gelatinisation endotherm between 117 and 133°C and with a ΔH of 0·7 cal. g^?1 dry starch, which is somewhat lower than other B-type starches.     

Structure of lintnerized starch is related to X-ray diffraction pattern and susceptibility to acid and enzyme hydrolysis of starch granules

Acid-resistant residues (lintnerized starches, Ls) were prepared from starches showing A-, B- and C- X-ray diffraction patterns. Ls retained the same X-ray crystalline type as their native counterparts with an improvement in diffraction intensity. Fluorophore-assisted capillary electrophoresis (FACE) study indicated that structural characteristics of Ls were associated with X-ray diffraction patterns. Double helices originated from linear chains with an approximate average degree of polymerisation (DP) 14, 16, and 15 would span the entire length of crystalline lamellae of A-, B-, and C-type starches, respectively. The proportion of singly branched materials (SB) with DP 25 protected in Ls was higher for A-type Ls (10-17%) than for B-type Ls (4-6%) and C-type Ls (8%). The structures of SB were similar in which branched chain (DP 13-15) was longer than main chain (DP 10-12). The structural characteristics of Ls are discussed in relation to acid and enzymatic degradations of starch granules.     

Effect of enzymatic hydrolysis on native starch granule structure

Enzymatic digestion of six starches of different botanical origin was studied in real time by in situ time-resolved small-angle neutron scattering (SANS) and complemented by the analysis of native and digested material by X-ray diffraction, differential scanning calorimetry, small-angle X-ray scattering, and scanning electron microscopy with the aim of following changes in starch granule nanostructure during enzymatic digestion. This range of techniques enables coverage over five orders of length-scale, as is necessary for this hierarchically structured material. Starches studied varied in their digestibility and displayed structural differences in the course of enzymatic digestion. The use of time-resolved SANS showed that solvent-drying of digested residues does not induce any structural artifacts on the length scale followed by small-angle scattering. In the course of digestion, the lamellar peak intensity gradually decreased and low-q scattering increased. These trends were more substantial for A-type than for B-type starches. These observations were explained by preferential digestion of the amorphous growth rings. Hydrolysis of the semicrystalline growth rings was explained on the basis of a liquid-crystalline model for starch considering differences between A-type and B-type starches in the length and rigidity of amylopectin spacers and branches. As evidenced by differing morphologies of enzymatic attack among varieties, the existence of granular pores and channels and physical penetrability of the amorphous growth ring affect the accessibility of the enzyme to the substrate. The combined effects of the granule microstructure and the nanostructure of the growth rings influence the opportunity of the enzyme to access its substrate; as a consequence, these structures determine the enzymatic digestibility of granular starches more than the absolute physical densities of the amorphous growth rings and amorphous and crystalline regions of the semicrystalline growth rings.     

A method for estimating the nature and relative proportions of amorphous, single, and double-helical components in starch granules by (13)C CP/MAS NMR

An improved method to analyze the (13)C NMR spectra of native starches, which considers the contribution of the V-type conformation and the nature of the amorphous component, has been developed. Starch spectra are separated into amorphous and ordered subspectra, using intensity at 84 ppm as a reference point. The ordered subspectra of high amylose starches show the presence of both V-type single helices and B-type double helices. Relative proportions of amorphous, single, and double-helical conformations are estimated by apportioning intensity of C1 peak areas between conformational types on the basis of ordered and amorphous subspectra of the native starch. Quantitative analysis shows that the V-type single-helical component increases with amylose content of starches. Different amorphous subspectra are needed to provide a consistent analysis of granular starches from diverse sources. The method of preparation was found to be more important than the starch botanical origin in determining (13)C NMR spectral features of amorphous samples.     

Gelatinization of starch in excess water: beyond the melting of lamellar crystallites. A combined wide- and small-angle X-ray scattering study

The gelatinization of waxy rice, regular rice, and potato starch suspensions (66% w/w moisture) was investigated by real-time small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) during heating and by fast ramp differential scanning calorimetry (DSC). The high-angle tail of the SAXS patterns suggested the transition from surface to mass fractal structures in the DSC gelatinization range. Amylose plays a major role in determining the dimensions of the self-similar structures that develop during this process as the characteristic power-law scattering behavior extends to lower scattering angles for regular than for waxy starches. Crystallinity of A-type starches is lost in the temperature region roughly corresponding to the DSC gelatinization range. At the end of the gelatinization endotherm, the B-type potato starch showed residual crystallinity (WAXD), while SAXS-patterns exhibited features of remaining lamellar stacks. Results indicate that the melting of amylopectin crystallites during gelatinization is accompanied by the (exothermic) formation of amorphous networks.     

Structure–function relationships in A and B granules from wheat starches of similar amylose content

Five wheat (Triticum aestivum L.) starches, from the varieties Sunco, Sunsoft, SM1118, and SM1028, with similar amylose content, and a waxy wheat were separated into large (A) and small (B) granules. The unfractionated starches, and isolated A and B granules, were characterized structurally and evaluated for their functional properties. The amylopectin chain length distribution revealed that A granules had a lower proportion of short chains with degree of polymerization (DP) 6-12 and a higher proportion of chains with DP 25-36 than B granules. X-ray diffraction (XRD) patterns showed predominantly A-type crystallinity for all of the starches. No differences in the crystallinity were found between unfractionated, A and B granules. Small-angle X-ray scattering (SAXS) patterns of the starches at 55% hydration showed that the lamellar repeat distance in A granules was larger than that of B granules for all the starches examined. However, the lamellar distances of both A and B granules from the waxy wheat were smaller than those of Sunco, Sunsoft, SM1118 and SM1028 starches. The swelling power of the B granules was greater than that of A granules from all five starches. The kinetics of digestion of A and B granules with α-amylase in vitro were complex, with B granules initially digested to a greater extent than A granules. After 4 h of incubation, A granules showed greater digestibility than B granules, except in the case of waxy starch where unfractionated and fractionated granules had similar in vitro digestibility. Correlations between structural and functional parameters were more significant for the isolated A and B granules than for the unfractionated starches. This study demonstrates that A and B granules differ in structure and functionality, and that some correlations between these properties could be masked in unfractionated starches with bimodal granule size distribution.     

Effect of heat–moisture treatment on the structure and physicochemical properties of tuber and root starches

Starch from tubers potato (Solanum tuberosum), taro (Alocassia indica), new cocoyam (Xanthosoma sagitifolium), true yam (Dioscorea alata), and root cassava, (Manihot esculenta) crops was isolated and its morphology, composition and physicochemical properties were investigated before and after heat–moisture treatment (HMT) (100 °C, for 10 h at a moisture content of 30%). Native starch granules were round to oval to polygonal with smooth surfaces. The granule size (diameter) ranged from 3.0 to 110 μm.The total amylose content ranged from 22.4 to 29.3%, of which 10.1–15.5% was complexed by native lipid. The phosphorus content ranged from 0.01 to 0.1%. The X-ray pattern of potato and true yam was of the ‘B’-type. Whereas, that of new cocoyam and taro was of the ‘A’-type. Cassava exhibited a mixed ‘A+B’-type X-ray pattern. The relative crystallinity, swelling factor (SF), amylose leaching (AML), gelatinization temperature range and the enthalpy of gelatinization of the native starches ranged from 30 to 46, 22 to 54, 5 to 23%, 13 to 19 °C and 12 to 18 J/g, respectively. Susceptibility of native starches towards hydrolysis by 2.2N HCl and porcine pancreatic -amylase were 60–86% (after 12 days), and 4–62% (after 72 h), respectively. Retrogradation was most pronounced in the B-type starches. Granule morphology remained unchanged after HMT. The X-ray pattern of the B-type starches was altered (B→A+B) on HMT. However, that of the other starches remained unchanged. HMT decreased SF, AML, gelatinization enthalpy and susceptibility towards acid hydrolysis, but increased gelatinization temperatures and enzyme susceptibility. Extent of retrogradation and relative crystallinity decreased on HMT of true yam and potato starches, but remained unchanged in the other starches. The foregoing data showed that changes in physicochemical properties on HMT are influenced by the interplay of crystallite disruption, starch chain associations and disruption of double helices in the amorphous regions.     

Structural and thermodynamic properties of starches extracted from GBSS and GWD suppressed potato lines

A combined DSC–SAXS approach was employed to study the effects of amylose and phosphate esters on the assembly structures of amylopectin in B-type polymorphic potato tuber starches. Amylose and phosphate levels in the starches were specifically engineered by antisense suppression of the granule bound starch synthase (GBSS) and the glucan water dikinase (GWD), respectively. Joint analysis of the SAXS and DSC data for the engineered starches revealed that the sizes of amylopectin clusters, thickness of crystalline lamellae and the polymorphous structure type remained unchanged. However, differences were found in the structural organization of amylopectin clusters reflected in localization of amylose within these supramolecular structures. Additionally, data for annealed starches shows that investigated potato starches possess different types of amylopectin defects. The relationship between structure of investigated potato starches and their thermodynamic properties was recognized.     

Structural transformations during gelatinization of starches in limited water: combined wide- and small-angle X-ray scattering study

Rice flour (18-25% moisture) and potato starch (20% moisture) were heated with continuous recording of the X-ray scattering during gelatinization. Rice flours displayed A-type crystallinity, which gradually decreased during gelatinization. The development of the characteristic 9 nm small-angle X-ray scattering (SAXS) peak during heating at sub-gelatinization temperatures indicated the gradual evolution into a stacked lamellar system. At higher temperatures, the crystalline and lamellar order was progressively lost. For potato starch (B-type crystallinity), no 9 nm SAXS peak was observed at ambient temperatures. Following the development of lamellar structures at sub-gelatinization temperatures, B-type crystallinity and lamellar order was lost during gelatinization. On cooling of partially gelatinized potato starch, A-type crystallinity steadily increased, but no formation of stacked lamellar structures was observed. Results were interpreted in terms of a high-temperature B- to A-type recrystallization, in which the lateral movement of double helices was accompanied by a shift along their helical axis. The latter is responsible for the inherent frustration of the lamellar stacks.