Identification of citrate utilization transposon Tn3411 from a naturally occurring citrate utilization plasmid.

We have isolated a new transposon, Tn3411, encoding citrate-utilizing ability, from a naturally occurring citrate utilization (Cit) plasmid, pOH3001. Citrate transposon Tn3411 was transposed from pOH3001 to lambda b519 b515 cI857 S7 (abbreviated lambda bb) phage, and further from the resulting lambda bb:Tn3411 to a vector plasmid, pBR322, in recA-deficient strains. The Cit+ plasmids (pOH2 and pOH3) constructed by the integration of Tn3411 into pBR322 were examined by restriction endonuclease and heteroduplex analysis. The results obtained were as follows: (i) Tn3411 was 7.4 kilobases long and flanked by small inverted repeats, and it contained one more pair of inverted repeats at the opposite orientation in the internal region, thus making alternate repeats; and (ii) the Cit+ structure gene was located on the fragment (5.5 kilobases) between two SalI cleavage sites on Tn3411.     

Spontaneous deletion of citrate-utilizing ability promoted by insertion sequences.

The citrate utilization (Cit+) transposon Tn3411 was shown to be flanked by directly repeated sequences (IS3411L and IS3411R) by restriction enzyme analysis and electron microscope observation. Cit- deletion mutants were frequently found to be generated in pBR322::Tn3411 by intramolecular recombination between the two copies of IS3411. The flanking IS3411 elements of Tn3411 were shown to be functional insertion sequences by Tn3411-mediated direct and inverse transposition. Tn3411-mediated inverse transposition from pBR322::Tn3411 to the F-plasmid derivative pED100 occurred more efficiently than that of direct transposition of the Cit+ determinant. This was thought to be due to the differential transposability of IS3411L and IS3411R in the transposition process. The frequency of transposition of IS3411 marked with a chloramphenicol resistance determinant was much higher than IS3411-mediated cointegrate formation, suggesting that replicon fusions are not essential intermediates in the transposition process of Tn3411 or IS3411. Spontaneous deletions occurred with high frequency in recA hosts. The spontaneous deletion promoted by homologous recombination between two IS3411 elements in Tn3411 was examined with deletion mutants.     

Nucleotide sequence of the gene determining plasmid-mediated citrate utilization.

The citrate utilization determinant from transposon Tn3411 has been cloned and sequenced, and its polypeptide products have been characterized in minicell experiments. The nucleotide sequence was determined for a 2,047-base-pair BglII restriction endonuclease fragment that includes the citrate determinant. This region contains an open reading frame that would encode a 431-amino-acid very hydrophobic polypeptide and which is preceded by a reasonable ribosomal binding site. However, the single polypeptide found in minicell experiments had an apparent molecular weight of 35,000 on sodium dodecyl sulfate-polyacrylamide gel electrophoresis.     

Nucleotide sequence analysis of the long terminal repeat of avian myeloblastosis virus and adjacent host sequences.

The nucleotide sequence of the integrated avian myeloblastosis virus long terminal repeat has been determined. The sequence is 385 base pairs long and is present at both ends of the viral DNA. The cell-virus junctions at each end consist of a 6-base-pair direct repeat of cell DNA next to the inverted repeat of viral DNA. The long terminal repeat also contains promoter-like sequences, an mRNA capping site, and polyadenylation signals. Several features of this long terminal repeat suggest a structural and functional similarity with sequences of transposable and other genetic elements. Comparison of these sequences with long terminal repeats of other avian retroviruses indicates that there is a great variation in the 3' unique sequence (U3), whereas the 5' specific sequences (U5) and the R region are highly conserved.     

Complete nucleotide sequence of insertion element IS4351 from Bacteroides fragilis.

The nucleotide sequence and genetic analyses of one of the directly repeated sequences flanking the macrolide-lincosamide-streptogramin B drug resistance determinant, ermF, from the Bacteroides fragilis R plasmid, pBF4, suggested that this region is an insertion sequence (IS) element. This 1,155-base-pair element contained partially matched (20 of 25 base pairs) terminal-inverted repeats, overlapping, anti-parallel open reading frames, and nine promoterlike sequences, including three that were oriented outward. Analysis of this sequence revealed no significant nucleotide homology to 13 other known IS elements. Inasmuch as Southern blot hybridization analysis detected homologous sequences in chromosomal DNA and its G+C content (42 mol%) was similar to that of B. fragilis, the data suggested that this element is of Bacteroides origin. Transposition promoted by this element was demonstrated in recA E. coli. Recombinants were recovered by selecting for the activation of a promoterless chloramphenicol resistance gene on the plasmid pDH5110 and were characterized by restriction endonuclease mapping and Southern blot hybridization. We propose that this IS element be designated IS4351.     

Nucleotide sequence analysis of IS256 from the Staphylococcus aureus gentamicin-tobramycin-kanamycin-resistance transposon Tn4001

Resistance to the aminoglycosides gentamicin, tobramycin and kanamycin (GmTmKmR) in Australian clinical strains of Staphylococcus aureus is commonly carried on the composite transposon Tn4001. The resistance gene aacA-aphD of Tn4001, which encodes a bifunctional AAC(6')-APH(2") modifying enzyme, is flanked by two 1324-bp inverted repeats, IS256L and IS256R, that are identical in sequence. Analysis of the IS256 sequence revealed structural features characteristic of IS elements including 26-bp imperfect terminal inverted repeats and a single open reading frame with coding capacity for a 45.6 kDa protein. The nucleotide sequence of IS256 described here, together with the sequence of the aacA-aphD gene reported previously [Rouch et al., J. Gen. Microbiol. 133 (1987) 3039-3052], completes the entire sequence of Tn4001, which totals 4566 bp.     

Insertion sites and the terminal nucleotide sequences of the Tn4 transposon.

The nucleotide sequences at the ends of the Tn4 transposon (mercury spectinomycin and sulfonamide resistance) have been determined. They are inverted repeated sequences of 38 nucleotides with three mismatched base pairs. These sequences are strongly homologous with the terminal sequences of Tn501 (mercury resistance) but less so with those of Tn3 (ampicillin resistance). The Tn4 transposon generates pentanucleotide members (Tn3, Tn1000, Tn501, Tn551, IS2) with the exception of Tn1721 and bacteriophage Mu. Among the three Tn4 insertion sites examined here, two of them occurred near a nonanucleotide sequence in perfect homology with part of the terminal inverted-repeat sequence of Tn4 and the third insertion occurred near a sequence of partial homology to one end of Tn4. All three insertions were in the same orientation such that IRb is proximal to its homologous sequence on the recipient DNA.     

Nucleotide sequence analysis of the unusually long terminal inverted repeats of a giant linear plasmid, SCP1.

SCP1 is a giant linear plasmid of 350 kb coding for the methylenomycin biosynthetic genes in Streptomyces coelicolor. The unusually long terminal inverted repeats present on both ends of SCP1 were analyzed on the nucleotide sequence level. Analysis of six clones containing the terminal 0.35-kb XbaI fragment revealed a slight heterogeneity in the nucleotide sequences of the SCP1 ends. Moreover, it was indicated that this fragment contained seven palindromic inverted repeats and a GT-rich region in the 5'-end strand. The size of the terminal inverted repeats was determined to be 81 kb by the cloning and sequencing of their end-points. An insertion sequence, IS466 was shown to be present just at the end of the right terminal inverted repeat.     

Linearization and transposition of circular molecules of insertion sequence IS3.

IS3 transposase has been shown to promote production of characteristic circular and linear IS3 molecules from the IS3-carrying plasmid; IS3 circles have the entire IS3 sequence with terminal inverted repeats, IRL and IRR, which are separated by a three base-pair sequence originally flanking either end in the parental plasmid, whereas linear IS3 molecules have three nucleotide overhangs at their 5' ends. Here, we showed that a plasmid carrying an IS3 derivative, which is flanked by different sequences at both ends, generated IS3 circles and linear IS3 molecules owing to the action of transposase. Cloning and sequencing analyses of the linear molecules showed that each had the same 5'-protruding three nucleotide overhanging sequences at both ends, suggesting that the linear molecules were not generated from the parental plasmid by the two double-strand breaks at both end regions of IS3. The plasmid carrying IS3 with a two base-pair mutation in the terminal dinucleotide, which would be required for transposase to cleave the 3' end of IS3, could still generate linear molecules as well as circles. Plasmids bearing an IS3 circle were cleaved by transposase and gave linear molecules with the same 5'-protruding three nucleotide overhanging sequences. These show that the linear molecules are generated from IS3 circles via a double-strand break at the three base-pair intervening sequence. Plasmids carrying an IS3 circle with the two base-pair end mutation still were cleaved by transposase, though with reduced efficiencies, suggesting that IS3 transposase has the ability to cleave not only the 3' end of IS3, but a site three nucleotides from the 5' end of IS3. IS3 circles also were shown to transpose to the target plasmids. The end mutation almost completely inhibited this transposition, showing that the terminal dinucleotides are important for the transfer of the 3' end of IS3 to the target as well as for the end cleavage.     

Evolutionary changes in the structural and regulatory regions of aminoglycoside-3'-phosphotransferase type I gene of E. coli

To investigate the evolutionary relationships between the aph(3') genes from different plasmids, the nucleotide sequence of the aph(3') gene from the E. coli R plasmid was determined and compared with the known aph(3') genes of Tn903 and Tn4352. Three point mutations in the structural part of the cloned aph(3') gene caused amino acid changes in the enzyme molecule at positions 19, 27 and 48 beginning from the start codon. The structural part of the gene was followed by two stop codons and a long DNA region containing no nucleotide sequences homologous to the sequences of Tn903 or Tn4352. Both the cloned aph(3') gene and Tn4352 were limited on the left by the spacer sequence and the insertion sequence IS176. Twenty one base pairs deletion abolished the -35 sequence of the promoter suggested for the aph(3') gene of Tn4352 and resulted in formation of a fusion promoter utilizing the -35 box of IS176 and the -10 box of the aph(3') gene. The distance between the -35 and -10 sequences changed from 18 to 17 bp. Changes in the cloned aph(3') gene and the flanking DNA regions resulted in formation of a new promoter and loss of the right IS176 element.     

Mini-Tn5 transposon derivatives for insertion mutagenesis, promoter probing, and chromosomal insertion of cloned DNA in gram-negative eubacteria.

A collection of Tn5-derived minitransposons has been constructed that simplifies substantially the generation of insertion mutants, in vivo fusions with reporter genes, and the introduction of foreign DNA fragments into the chromosome of a variety of gram-negative bacteria, including the enteric bacteria and typical soil bacteria like Pseudomonas species. The minitransposons consist of genes specifying resistance to kanamycin, chloramphenicol, streptomycin-spectinomycin, and tetracycline as selection markers and a unique NotI cloning site flanked by 19-base-pair terminal repeat sequences of Tn5. Further derivatives also contain lacZ, phoA, luxAB, or xylE genes devoid of their native promoters located next to the terminal repeats in an orientation that affords the generation of gene-operon fusions. The transposons are located on a R6K-based suicide delivery plasmid that provides the IS50R transposase tnp gene in cis but external to the mobile element and whose conjugal transfer to recipients is mediated by RP4 mobilization functions in the donor.     

Direct repeats flanking the Bacteroides transposon Tn4351 are insertion sequence elements.

The clindamycin-erythromycin resistance (Ccr Emr) region of the Bacteroides transposon Tn4351 is flanked by direct repeats. This study showed that the direct repeats are insertion sequence (IS) elements. Although both IS elements can mediate transfer of the chloramphenicol (Cmr) marker on pBR328 by cointegrate formation with the conjugal IncW plasmid R388, IS4351R-mediated transfer of Cmr occurred at a consistently lower frequency than did the transfer mediated by IS4351L. Analysis of plasmids from the resultant transconjugants revealed IS-mediated activities such as deletions, tandem duplication of IS4351L, and excision of IS4351R.     

Cloning and sequence of IS1000, a putative insertion sequence from Thermus thermophilus HB8

The complete nucleotide sequences of two copies of a putative insertion sequence IS1000 from Thermus thermophilus HB8 are presented. IS1000 is 1196 base pairs long, contains a long open reading frame which could code for a protein of 317 amino acids, and has imperfect terminal inverted repeats of 6 base pairs (confirmed by the terminal sequencing of 4.5 copies of IS1000), but does not cause a target site duplication. There are at least 6 copies of IS1000 in the genome of T. thermophilus HB8. A search of the GEN-EMBL data base revealed that the putative 317 amino acid protein had significant homology with open reading frames in the transposable elements IS110 of Streptomyces coelicolor and IS492 of Pseudomonas atlantica.     

Nucleotide sequence of Rhizobium meliloti insertion sequence ISRm1: homology to IS2 from Escherichia coli and IS426 from Agrobacterium tumefaciens.

Nucleotide sequencing of Rhizobium meliloti insertion sequence ISRm1 showed that it is 1319 nucleotides long and includes 32/31 nucleotide terminal inverted repeats. Analysis of five different insertion sites using sequencing primers complementary to sequences within the left and right ends demonstrated that ISRm1 generates five bp direct repeats at the sites of insertion. Although ISRm1 has shown a target preference for certain short regions (hot spots), there was no apparent similarity in the DNA sequences near the insertion sites. On one strand ISRm1 contains two contiguous open reading frames (ORFs) spanning most of its length. ISRm1 was found to have over 50% sequence homology to insertion sequences IS2 from Escherichia coli and IS426 from Agrobacterium tumefaciens. Their sizes, the sequences of their inverted repeats, and the characteristics of their insertion sites are also comparable, indicating that ISRm1, IS2 and IS426 belong to a class of related insertion sequences. Comparison of the proteins potentially encoded by these insertion sequences showed that the two ORFs found in ISRm1 are also present in IS2 and IS426, suggesting that they may be functional genes.     

Four genes, two ends, and a res region are involved in transposition of Tn5053: a paradigm for a novel family of transposons carrying either a mer operon or an integron

The complete nucleotide sequence of an 8447 bp-long mercury-resistance transposon (Tn 5053 ) has been determined. Tn 5053 is composed of two modules: (i) the mercury-resistance module and (ii) the transposition module. The mercury-resistance module carries a mer operon, merRTPFAD , and appears to be a single-ended relic of a transposon closely related to the classical mercury-resistance transposons Tn 21 and Tn 501 . The transposition module of Tn 5053 is bounded by 25 bp terminal inverted repeats and contains four genes involved in transposition, i.e. tniA, tniB, tniQ , and tniR . Transposition of Tn 5053 occurs via cointegrate formation mediated by the products of the tniABQ genes, followed by site-specific cointegrate resolution. This is catalysed by the product of the tniR gene at the res region, which is located upstream of tniR . The same pathway of transposition is used by Tn 402 (Tn 5090 ) which carries the integron of R751. Transposition genes of Tn 5053 and Tn 402 are interchangeable. Sequence analysis suggests that Tn 5053 and Tn 402 are representatives of a new family of transposable elements, which fall into a recently recognized superfamily of transposons including retroviruses, insertion sequences of the IS 3 family, and transposons Tn 552 and Tn 7 . We suggest that the tni genes were involved in the dissemination of integrons.     

The IS1111 family members IS4321 and IS5075 have subterminal inverted repeats and target the terminal inverted repeats of Tn21 family transposons

IS5075 and IS4321 are closely related (93.1% identical) members of the IS1111 family that target a specific position in the 38-bp terminal inverted repeats of Tn21 family transposons and that are inserted in only one orientation. They are 1,327 bp long and have identical ends consisting of short inverted repeats of 12 bp with an additional 7 bp (TAATGAG) or 6 bp (AATGAG) to the left of the left inverted repeats and 3 bp (AGA) or 4 bp (AGAT) to the right of the right inverted repeat. Circular forms of IS5075 and IS4321 in which the inverted repeats are separated by abutting terminal sequences (AGATAATGAG) were detected. A similar circular product was found for the related ISPa11. Transposition of IS4321 into the 38-bp target site was detected, but a flanking duplication was not generated. The precisely reconstituted target site was also identified. Over 50 members of the IS1111 family were identified. They encode related transposases, have related inverted repeats, and include related bases that lie outside these inverted repeats. In some, the flanking bases number 5 or 6 on the left and 4 or 3 on the right. Specific target sites were found for several of these insertion sequence (IS) elements. IS1111 family members therefore differ from the majority of IS elements, which are characterized by terminal inverted repeats and a target site duplication, and from members of the related IS110 family, which do not have obvious inverted repeats near their termini.