Conversion of hexose into 5-hydroxymethylfurfural in imidazolium ionic liquids with and without a catalyst

Conversion of fructose and glucose into 5-hydroxymethylfurfural (HMF) was investigated in various imidazolium ionic liquids, including 1-butyl-3-methylimidazolium chloride (BmimCl), 1-hexyl-3-methylimidazolium chloride (HmimCl), 1-octyl-3-methylimidazolium chloride (OmimCl), 1-benzyl-3-methylimidazolium chloride (BemimCl), 1-Butyl-2,3-dimethylimidazolium chloride (BdmimCl), and 1-butyl-3-methylimidazolium p-toluenesulfonate (BmimPS). The acidic C-2 hydrogen of imidazolium cations was shown to play a major role in the dehydration of fructose in the absence of a catalyst, such as sulfuric acid or CrCl₃. Both the alkyl groups of imidazolium cations and the type of anions affected the reactivity of the carbohydrates. Although, except BmimCl and BemimCl, other four ionic liquids could only achieve not more than 25% HMF yields without an additional catalyst, 60–80% HMF yields were achieved in HmimCl, BdmimCl, and BmimPS in the presence of sulfuric acid or CrCl₃ in sufficient quantities.     

Phosphorous pentoxide mediated synthesis of 5-HMF in ionic liquid at low temperature

A convenient, mild and environment-friendly dehydration reaction of fructose in ionic liquid using phosphorous pentoxide (P₂O₅) has been investigated. The acidic nature of P₂O₅ along with its hygroscopic properties has been successfully utilized to afford 81.2% yield of 5-hydroxymethylfurfural (5-HMF) at 50 °C in 60 mins. Phosphoric acid yielded remarkably less 5-HMF even at higher temperature and longer reaction times. The reaction was optimized by varying different parameters and the results indicated that no rehydration products, such as levulinic acid or formic acid, were formed.     

Hydrolysis of cellulose in SO₃H-functionalized ionic liquids

Influence of acidity and structure of ionic liquids on microcrystalline cellulose (MCC) hydrolysis was investigated. MnCl₂-containing ionic liquids (ILs) were efficient catalysts and achieved MCC conversion rates of 91.2% and selectivities for 5-hydroxymethyl furfural (HMF), furfural and levulinic acid (LA) of 45.7%, 26.2% and 10.5%, respectively. X-ray diffractometry indicated that catalytic hydrolysis of MCC in ionic liquids resulted in the changes to MCC crystallinity and transformation of cellulose I into cellulose II. SO₃H-functionalized ionic liquids showed higher activities than non-functionalized ILs. The simplicity of the chemical transformation of cellulose provides a new approach for the use this polymer as raw material for renewable energy and chemical industries.     

Microwave-assisted conversion of lignocellulosic biomass into furans in ionic liquid

Production of 5-hydroxymethylfurfural (HMF) and furfural from lignocellulosic biomass was studied in ionic liquid in the presence of CrCl₃ under microwave irradiation. Corn stalk, rice straw and pine wood treated under typical reaction conditions produced HMF and furfural in yields of 45–52% and 23–31%, respectively, within 3 min. This method should be valuable to facilitate energy-efficient and cost-effective conversion of biomass into biofuels and platform chemicals.     

Chromium uptake,retention and reduction in photosynthetic <Emphasis Type="Italic">Euglena gracilis</Emphasis>

Photosynthetic Euglena gracilis grown with different K₂CrO₄ concentrations was analyzed for its ability to take up, retain and reduce Cr(VI). For comparison, cells were also exposed to CrCl₃. Cellular Cr(VI) uptake at pH 7.2 showed a hyperbolic saturation pattern with K _m of 1.1 mM, V _m of 16 nmol (h × 10⁷ cells)⁻¹, and K _i sulfate of 0.4 mM. Kinetic parameters for sulfate uptake were similar, K _m = 0.83 mM, V _m = 15.9 nmol (h × 10⁷cells)⁻¹ and K _i chromate = 0.3 mM. The capacity to accumulate chromium depended on the ionic species, external concentration and pH of the incubation medium. Cr(VI) or Cr(III) accumulation was negligible in the acidic (pH 3.5) culture medium, in which Cr(VI) was abiotically reduced to Cr(III). At pH 7.2 Cr(VI) was fully stable and high accumulation (>170 nmol/1 × 10⁷ cells at 1 mM K₂CrO₄) was achieved; surprisingly, Cr(III) accumulation was also significant (>35 nmol/1 × 10⁷ cells at 1 mM CrCl₃). Cr(VI) was reduced by cells at pH 7.2, suggesting the presence of an external reductive activity. Cr(VI) induced an increased cysteine and glutathione content, but not in phytochelatins suggesting that chromium accumulation was mediated by monothiol compounds.     

Hypoglycemic activity and acute oral toxicity of chromium methionine complexes in mice

The hypoglycemic activity of chromium methionine (CrMet) in alloxan-induced diabetic (AID) mice was investigated and compared with those of chromium trichloride hexahydrate (CrCl₃·6H₂O) and chromium nicotinate (CrNic) through a 15-day feeding experiment. The acute oral toxicity of CrMet was also investigated in ICR (Institute for Cancer Research) mice by a single oral gavage. The anti-diabetic activity of CrMet was explored in detail from the aspects of body weight (BW), blood glucose, triglyceride, total cholesterol, liver glycogen levels, aspartate transaminase (AST) and alanine transaminase (ALT) levels. The obtained results showed that CrMet had beneficial effects on glucose and lipid metabolism, and might possess hepatoprotective efficacy for diabetes. Daily treatment with 500 and 1000 μg Cr/kg BW of CrMet in AID mice for 15 days indicated that this low-molecular-weight organic chromium complex had better bioavailability and more beneficial effects on diabetics than CrCl₃·6H₂O. CrMet also had advantage over CrNic in the control of AST and ALT activities. Acute toxicity studies revealed that CrMet had low toxicity potential and relatively high safety margins in mice with the LD₅₀ value higher than 10.0 g/kg BW. These findings suggest that CrMet might be of potential value in the therapy and protection of diabetes.     

Lipase-catalyzed transesterification in several reaction systems: An application of room temperature lonic liquids for bi-phasic production ofn-butyl acetate

Organic solvents are widely used in biotransformation systems. There are many efforts to reduce the consumption of organic solvents because of their toxicity to the environment and human health. In recent years, several groups have started to explore novel organic solvents called room temperature ionic liquids in order to substitute conventional organic solvents. In this work, lipase-catalyzed transesterification in several uni-and bi-phasic systems was studied. Two representative hydrophobic ionic liquids based on 1-butyl-3-methylimidazolum coupled with hexafluorophosphate ([BMIM][PF₆]) and bis[(trifluoromethylsulfonyl) imide] ([BMIM] [Tf₂N]) were employed as reaction media for the transesterification ofn-butanol. The commercial lipase, Novozym 435, was used for the transesterification reaction with vinyl acetate as an acyl donor, The conversion yield was increased around 10% in a water/[BMIM][Tf₂N], bi-phasic system compared with that in a water/hexane system. A higher distribution of substrates into the water phase is believed to enhance the conversion yield in a water/[BMIM][Tf₂N] system. Partion coefficients of the substrates in the water/[BMIM][Tf₂N] bi-phasic system were higher than three times that found in the water/hexane system, while n-butyl acetate showed a similar distribution in both systems. Thus, RTILs appear to be a promising substitute of organic solvents in some biotransformation systems.     

Enantioselective transesterification of racemic phenyl ethanol and its derivatives in organic solvent and ionic liquid using Pseudomonas aeruginosa lipase

The transesterification of 1-phenyl ethanol has been carried out using lipases from Pseudomonas aeruginosa MTCC 5113, to obtain chirally pure aryl ethanols with good yield and excellent enantioselectivity. The lipase from P. aeruginosa gave good conversion and moderate enantioselectivity (ee) in organic solvents, however, when the catalytic amount of ionic liquids were added in the reaction mixture, excellent enantioselectivity was obtained. Moreover, the change in enantiomer preference was seen in the presence of catalytic amount of ionic liquids. The findings revealed that hydrophobic ionic liquids (two-phase system) were the best solvents and 4-substituted aryl ethanols were the pre-eminent substrates for such type of reactions. The preparative scale (5 g) transesterification of 1-phenylethanol using lipases from P. aeruginosa yielded S-(−)-1-phenyl ethanol with 39% yield and >99% ee in hexane and 46% yield and >99% ee in [BMIm][PF₆].     

New bis(azolylcarbonyl)pyridine chromium(III) complexes as initiators for ethylene polymerization

Reaction of 2,6-pyridinedicarbonyl dichloride with 3,5-dimethylpyrazole and 1H-indazole, respectively, yield the tridentate ligands 2,6-bis(3,5-dimethylpyrazol-1-ylcarbonyl)pyridine (1) and 2,6-bis(indazol-1-ylcarbonyl)pyridine (2). The molecular structure of the new compound (2) was determined by single-crystal X-ray diffraction. These ligands react with CrCl₃(THF)₃ in THF to form neutral complexes of general formula [CrCl₃{2,6-bis(azolylcarbonyl)pyridine-N,N,N}] (3, 4) which were isolated in high yield as air stable green solids and characterized by elemental analysis, magnetic moment, IR, and mass spectroscopies. Theoretical calculations predict that the thermodynamically preferred structure of the complexes is the fac configuration. After reaction with methylaluminoxane (MAO) the chromium(III) complexes are active for the polymerization of ethylene.     

Absorption, excretion and retention of 51Cr from labelled Cr-(III)-picolinate in rats

The bioavailability of chromium from Cr-picolinate (CrPic₃) and Cr-chloride (CrCl₃) was studied in rats using ⁵¹Cr-labelled compounds and whole-body-counting. The intestinal absorption of Cr was twice as high from CrPic₃ (1.16% vs 0.55%) than from CrCl₃, however most of the absorbed ⁵¹Cr from CrPic₃ was excreted into the urine within 24 h. After i.v. or i.p. injection, the whole-body retention curves fitted well to a multiexponential function, demonstrating that plasma chromium is in equilibrium with three pools. For CrPic₃, a large pool exists with a very rapid exchange (T _1/2 = <0.5 days), suggesting that CrPic₃ is absorbed as intact molecule, from which the main part is directly excreted by the kidney before degradation of the chromium complex in the liver can occur. CrCl₃ is less well absorbed but the rapid exchange pool is much smaller, resulting in even higher Cr concentrations in tissue such as muscle and fat. However, 1–3 days after application, the relative distribution of ⁵¹Cr from both compounds was similar in all tissues studied, indicating that both compounds contribute to the same storage pool. In summary, the bioavailability of CrPic₃ in rats is not superior compared to CrCl₃.     

A theoretical investigation of the interactions between hydroxyl-functionalized ionic liquid and water/methanol/dimethyl sulfoxide

Density functional calculations have been used to investigate the interactions of 1-(2-hydroxyethyl)-3-methylimidazolium ([C₂OHmim]⁺)-based ionic liquids (hydroxyl ILs) with water (H₂O), methanol (CH₃OH), and dimethyl sulfoxide (DMSO). It was found that the cosolvent molecules interact with the anion and cation of each ionic liquid through different atoms, i.e., H and O atoms, respectively. The interactions between the cosolvent molecules and 1-ethyl-3-methylimizolium ([C₂mim]⁺)-based ionic liquids (nonhydroxyl ILs) were also studied for comparison. In the cosolvent–[nonhydroxyl ILs] systems, a furcated H-bond was formed between the O atom of the cosolvent molecule and the C2-H and C6-H, while there were always H-bonds involving the OH group of the cation in the cosolvent–[hydroxyl ILs] systems. Introducing an OH group on the ethyl side of the imidazolium ring may change the order of solubility of the molecular liquids.     

Asymmetric alkene epoxidation by Mn(III)salen catalyst in ionic liquids

The enantioselective epoxidation of 6-cyano-2,2-dimethylchromene (Chrom) catalysed by the Jacobsen catalyst, using sodium hypochlorite (NaOCl) as oxygen source, at room temperature, was performed in a series of 1,3-dialkylimidazolium and tetra-alkyl-dimethylguanidium based ionic liquids. All the room temperature ionic liquids (RTILs) could be used as reaction media for the enantioselective epoxidation of the alkene giving, generally, moderate to good epoxide yields and enantiomeric excesses (ee%).For the series of ionic liquids derived from the 1,3-dialkylimidazolium cation, it was observed some relationship between the RTILs physical properties and the catalytic reaction parameters, exemplified by linear correlations between (i) the ee% and the α Kamlet-Taft parameter (hydrogen bond acidity of the solvent) for CH₂Cl₂ and [C₄m_nim][BF₄] ionic liquids (n = 1 or 2), and (ii) the ee% and the β Kamlet-Taft parameter (hydrogen bond basicity of the solvent) for CH₂Cl₂ and [C₄mim][X] ionic liquids (X = PF₆, NTf₂ or BF₄).All the RTILs could be reused in further catalytic cycles, with the exception of [C₈mim][PF₆]. The reutilisation of the Jacobsen catalyst for four times generally led to a decrease in the epoxide yield and to a slight decrease in the enantioselectivity. The recycling of the catalyst could be improved by imparting an ionic character to the complex through abstraction of the axially coordinated chloride anion (Cat 2). Other oxygen sources, such as iodosylbenzene, hydrogen peroxide and urea-hydrogen peroxide adduct, were also tested coupled with Jacobsen catalyst, but the best results were achieved with NaOCl.     

DABCO-based chiral ionic liquids as recoverable and reusable organocatalyst for asymmetric Diels–Alder reaction

New DABCO-based chiral ionic liquids were synthesized and evaluated in asymmetric Diels–Alder reaction of cyclopentadiene with α,β-unsaturated aldehydes or 4-phenyl-3-buten-2-one. Chiral ionic liquid of modified MacMillan catalyst having a DABCO cation and hexafluorophosphate anion acts as organocatalyst (5 mol%) for the Diels–Alder reaction of crotonaldehyde and cyclopentadiene producing 98% of the product and 87% ee (endo) in CH₃CN/H₂O (95/5) at 25°C in 2 h. The scope and limitations of the catalysis were also studied by using cyclopentadiene and α,β-unsaturated aldehydes, and the Diels–Alder products were obtained in 18%–92% yields with 68%–93% ee. The catalyst was recycled and reused up to 6 cycles with a slight drop in ee and conversion of the product.     

Biotransformation of furfural and 5-hydroxymethyl furfural by enteric bacteria

Summary A survey was conducted with seventeen enteric bacterial strains (including the generaKlebsiella, Enterobacter, Escherichia, Citrobacter, Edwardsiella andProteus) to examine their ability to transform furfural and 5-hydroxymethyl furfural (5-MHF). The enteric bacteria were able to convert furfural to furfuryl alcohol under both aerobic and anaerobic conditions in a relatively short incubation time of 8 h. 5-HMF was transformed by all the enteric bacteria studied to an unidentified compound postulated to be 5-hydroxymethyl furfuryl alcohol, which had an absorbance maximum of 222 nm. These bacteria did not transform furfuryl alcohol or 2-furoic acid. The enteric bacteria did not use furfural, 5-HMF, furfuryl alcohol or 2-furoic acid as sole source of carbon and energy. Biotransformation of furfural and 5-HMF was accomplished by co-metabolism in the presence of glucose and peptone as main substrates. The rate of transformation was similar under both aerobic and anaerobic conditions. These transformations are likely to be of value in the detoxification of furfurals, and in their ultimate conversion to methane and CO₂ by anaerobic digestion.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

Hydroxynitrile Lyase Catalysis in Ionic Liquid-containing Systems

The cleavage of mandelonitrile catalysed by hydroxynitrile lyases (HNL) from Prunus amygdalus (PaHNL) and Manihot esculenta (MeHNL) proceeded more rapidly in monophasic aqueous media containing 1-propyl-3-methylimidazolium tetrafluoroborate [C₄MIm][BF₄] than in media containing acetonitrile or THF. Both HNLs were much more thermostable in [C₄MIm][BF₄] than in acetonitrile or THF. The addition of each of the four ionic liquids 1-butyl-, 1-pentyl- and 1-hexyl-3-methylimidazolium tetrafluoroborates at 2–6% (v/v in the aqueous phase) increased both the enzyme activity and the product e.e. in the PaHNL-catalysed transcyanation in an aqueous/DIPE biphasic system. However, MeHNL was inactivated by the ionic liquids, as indicated by the decreased reaction rate, substrate conversion and product e.e.     

Production of 5-hydroxymethylfurfural in ionic liquids under high fructose concentration conditions

Acid-promoted, selective production of 5-hydroxymethylfurfural (HMF) under high fructose concentration conditions was achieved in ionic liquids (ILs) at 80 °C. A HMF yield up to 97% was obtained in 8 min using 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl) catalyzed with 9 mol % hydrochloric acid. More significantly, an HMF yield of 51% was observed when fructose was loaded at a high concentration of 67 wt % in [C₄mim]Cl. Water content below 15.4% in the system had little effect on HMF yield, whereas a higher water content was detrimental to both reaction rate and HMF yield. In situ NMR analysis suggested that the transformation of fructose to HMF was a highly selective reaction that proceeded through the cyclic fructofuranosyl intermediate pathway. This work increased our capacity to produce HMF, and should be valuable to facilitate cost-efficient conversion of biomass into biofuels and bio-based products.     

An efficient catalytic dehydration of fructose and sucrose to 5-hydroxymethylfurfural with protic ionic liquids

The renewable furan-based platform chemical, 5-hydroxymethylfurfural (HMF), has been efficiently synthesized from d-fructose and sucrose in the presence of a catalytic amount of protic ionic liquids. The 1-methylimidazolium-based and N-methylmorpholinium-based ionic liquids are employed. As a result, 74.8% and 47.5% yields of HMF are obtained from d-fructose and sucrose, respectively, at 90 °C for 2 h under nitrogen atmosphere when N-methylmorpholinium methyl sulfonate ([NMM]⁺[CH₃SO₃]⁻) is used as the catalyst in an N,N-dimethylformamide-lithium bromide (DMF-LiBr) system. The acidities of ionic liquids are determined by the Hammett method, and the correlation between acidity and catalytic activity is discussed. Moreover, the effects of reaction temperature and time are investigated, and a plausible reaction mechanism for the dehydration of d-fructose is proposed.     

ansa-Chromocenes: An alternative route to Me2Si(C5Me4)2Cr

The mechanism for the preparation of Me₂Si(C₅Me₄)₂Cr, 1, from CrCl₂(THF)_x and Me₂Si(C₅Me₄)₂Li₂ was investigated and - in contrast to earlier claims - no evidence was found for the participation of an auxiliary ligand. The formation and stability of 1 is attributed to the combination of correct reaction conditions and a highly substituted ligand framework. Reactions with other ligands under identical conditions did not lead to the formation of ansa-chromocenes. Reaction with H₄C₂Ind₂Li₂ afforded the η³-Ind bridged dimer {H₄C₂(η⁵-Ind)(μ-,η³-Ind)Cr}₂, 9. Complex 1 does not coordinate PPh₃ or carbenes, but from reaction with two equivalents of xylyl isocyanide the CH-activated complex Me₂Si(C₅Me₄)(η³-C₅Me₃(H)(CH₂)Cr(CNC₆MeH₃)₂, 7, was obtained. Complexes 7 and 9 were characterised by X-ray crystallography.     

Optimization of lipase-catalyzed glucose ester synthesis in ionic liquids

Lipase-catalyzed esterification of glucose with fatty acids in ionic liquids (ILs) mixture was investigated by using supersaturated glucose solution. The effect of ILs mixture ratio, substrate ratio, lipase content, and temperature on the activity and stability of lipase was also studied. The highest yield of sugar ester was obtained in a mixture of 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim][TfO]) and 1-methyl-3-octylimidazolium bis[(trifluoromethyl)-sulfonyl]amide ([Omim][Tf₂N]) with a volume ratio of 9:1, while Novozym 435 (Candida antarctica type B lipase immobilized on acrylic resin) showed the optimal stability and activity in a mixture of [Bmim][TfO] and [Omim][Tf₂N] with a 1:1 volume ratio. Reuse of lipase and ILs was successfully carried out at the optimized reaction conditions. After 5 times reuse of Novozym 435 and ILs, 78% of initial activity was remained.