CsgA production by Escherichia coli O157:H7 alters attachment to abiotic surfaces in some growth environments

The role of curli expression in attachment of Escherichia coli O157:H7 to glass, Teflon, and stainless steel (SS) was investigated through the creation of csgA knockout mutants in two isolates of E. coli O157:H7. Attachment assays using epifluorescence microscopy and measurements of the force of adhesion of bacterial cells to the substrates using atomic force microscopy (AFM) force mapping were used to determine differences in attachment between wild-type (wt) and csgA-negative (ΔcsgA) strains following growth in four different media. The hydrophobicity of the cells was determined using contact angle measurements (CAM) and bacterial adhesion to hydrocarbons (BATH). The attachment assay results indicated that ΔcsgA strains attached to glass, Teflon, and SS surfaces in significantly different numbers than their wt counterparts in a growth medium-dependent fashion (P < 0.05). However, no clear correlation was seen between attachment numbers, surface type, or growth medium. No correlation was seen between BATH and CAM results (R(2) < 0.70). Hydrophobicity differed between the wt and ΔcsgA in some cases in a growth medium- and method-dependent fashion (P < 0.05). AFM force mapping revealed no significant difference in the forces of adhesion to glass and SS surfaces between wt and ΔcsgA strains (P > 0.05) but a significantly greater force of adhesion to Teflon for one of the two wt strains than for its ΔcsgA counterpart (P < 0.05). This study shows that CsgA production by E. coli O157:H7 may alter attachment behavior in some environments; however, further investigation is required in order to determine the exact relationship between CsgA production and attachment to abiotic surfaces.     

Structural and functional properties of chimeric EspA-FliCi filaments of EPEC

Enteropathogenic Escherichia coli utilise a filamentous type III secretion system to translocate effector proteins into host gut epithelial cells. The primary constituent of the extracellular component of the filamentous type III secretion system is EspA. This forms a long flexible helical conduit between the bacterium and host and has a structure almost identical to that of the flagella filament. We have inserted the D3 domain of FliCi (from Salmonella typhimurium) into the outer domain of EspA and have studied the structure and function of modified filaments when expressed in an enteropathogenic E. coli espA mutant. We found that the chimeric protein EspA-FliCi filaments were biologically active as they supported protein secretion and translocation [assessed by their ability to trigger actin polymerisation beneath adherent bacteria (fluorescent actin staining test)]. The expressed filaments were recognised by both EspA and FliCi antisera. Visualisation and analysis of the chimeric filaments by electron microscopy after negative staining showed that, remarkably, EspA filaments are able to tolerate a large protein insertion without a significant effect on their helical architecture.     

Role of Extracellular Structures of Escherichia coli O157:H7 in Initial Attachment to Biotic and Abiotic Surfaces

Infection by human pathogens through the consumption of fresh, minimally processed produce and solid plant-derived foods is a major concern of the U.S. and global food industries and of public health services. Enterohemorrhagic Escherichia coli O157:H7 is a frequent and potent foodborne pathogen that causes severe disease in humans. Biofilms formed by E. coli O157:H7 facilitate cross-contamination by sheltering pathogens and protecting them from cleaning and sanitation operations. The objective of this research was to determine the role that several surface structures of E. coli O157:H7 play in adherence to biotic and abiotic surfaces. A set of isogenic deletion mutants lacking major surface structures was generated. The mutant strains were inoculated onto fresh spinach and glass surfaces, and their capability to adhere was assessed by adherence assays and fluorescence microscopy methods. Our results showed that filament-deficient mutants bound to the spinach leaves and glass surfaces less strongly than the wild-type strain did. We mimicked the switch to the external environment—during which bacteria leave the host organism and adapt to lower ambient temperatures of cultivation or food processing—by decreasing the temperature from 37°C to 25°C and 4°C. We concluded that flagella and some other cell surface proteins are important factors in the process of initial attachment and in the establishment of biofilms. A better understanding of the specific roles of these structures in early stages of biofilm formation can help to prevent cross-contaminations and foodborne disease outbreaks.     

Antibodies Directed against Shiga-Toxin Producing Escherichia coli Serotype O103 Type III Secreted Proteins Block Adherence of Heterologous STEC Serotypes to HEp-2 Cells

Shiga toxin-producing Escherichia coli (STEC) serotype O103 is a zoonotic pathogen that is capable of causing hemorrhagic colitis and hemolytic uremic syndrome (HUS) in humans. The main animal reservoir for STEC is ruminants and hence reducing the levels of this pathogen in cattle could ultimately lower the risk of STEC infection in humans. During the process of infection, STEC_O103 uses a Type III Secretion System (T3SS) to secrete effector proteins (T3SPs) that result in the formation of attaching and effacing (A/E) lesions. Vaccination of cattle with STEC serotype O157 T3SPs has previously been shown to be effective in reducing shedding of STEC_O157 in a serotype-specific manner. In this study, we tested the ability of rabbit polyclonal sera against individual STEC_O103 T3SPs to block adherence of the organism to HEp-2 cells. Our results demonstrate that pooled sera against EspA, EspB, EspF, NleA and Tir significantly lowered the adherence of STEC_O103 relative to pre-immune sera. Likewise, pooled anti-STEC_O103 sera were also able to block adherence by STEC_O157. Vaccination of mice with STEC_O103 recombinant proteins induced strong IgG antibody responses against EspA, EspB, NleA and Tir but not against EspF. However, the vaccine did not affect fecal shedding of STEC_O103 compared to the PBS vaccinated group over the duration of the experiment. Cross reactivity studies using sera against STEC_O103 recombinant proteins revealed a high degree of cross reactivity with STEC_O26 and STEC_O111 proteins implying that sera against STEC_O103 proteins could potentially provide neutralization of attachment to epithelial cells by heterologous STEC serotypes.     

Encoded protein from ycbR gene of enterohemorrhagic Escherichia coli O157:H7 associated with adherence to HEp-2 cells

Adhesion is one of the significant virulence factors in enterohemorrhagic Escherichia coli (EHEC) O157:H7 pathogenesis. It is regulated by specific loci in the genome sequence. This study mainly focused on investigating the influence of ycbR gene and its encoded YCBR protein on the adhesion of EHEC O157:H7 to HEp-2 cells. In the first part, mutants of EHEC O157:H7 were constructed through TnphoA mutagenesis and assayed for adherent ability. Six mutant strains with lost adherence to HEp-2 cells were isolated and then sequenced using a primer that hybridized to phoA sequence downstream of the fusion joint. The sequencing results indicated that the gene of eae and ycbR, between the initiation codon and the −10 sequence of Z4182, yciI, ARAC-type regulator protein, and high-affinity gluconate transporter of EHEC were all possibly related to adhesion. Of the six genes, the ycbR gene was cloned to the pET28a vector to analyze its function further. Recombinant YCBR protein fused to a His tag (YCBR-His) was expressed under IPTG induction and purified by Ni-NTA column. The purified protein was subcutaneously injected to rabbits to prepare antisera. The results of an adherence assay in the presence of anti-YCBR-His antibodies indicated that antibodies blocked the adherence of EHEC O157:H7 to HEp-2 cells. These observations suggested that ycbR encoded a novel adherence-associated determinant of EHEC O157:H7, which could contribute to the adhesive capacity of the bacteria.     

Putative Virulence Genes and Biofilm Production Among Typical Enteroaggregative Escherichia coli Isolates from Diarrhoeic Children in Kashmir and Andhra Pradesh

Fifty-eight typical EAEC isolates from children with diarrhoea were examined for HEp-2 cell adherence assay, presence of dispersin (aap), yersiniabactin (irp2), plasmid encoded toxins (pet), Shigella enterotoxin1 (set1A) and cryptic open reading frame (shf) putative virulence genes by polymerase chain reaction as well as for biofilm production. All the isolates showed aggregative adherence pattern on HEp-2 cells. All but five isolates (91.3 %) carried aap gene. While irp2, pet, set1A and shf genes were detected in 68.9, 5.1, 39.6, and 60.3 % isolates, respectively. Thirty-three (64.7 %) isolates out of 51 tested were found to produce biofilm which was found to be significantly associated only with set1A virulence gene (P = 0.025). Highest amount of biofilm was produced by a strain that possessed all the genes studied. Out of 14 isolates in which the most frequent gene combination (aap, irp2 and shf) was observed, only six produced biofilm. It is concluded that there is significant heterogeneity in putative virulence genes of EAEC isolates from diarrhoeic children and biofilm formation is associated with multiple genes.     

Differential Binding of Escherichia coli O157:H7 to Alfalfa, Human Epithelial Cells, and Plastic Is Mediated by a Variety of Surface Structures

Escherichia coli O157:H7 carried on plant surfaces, including alfalfa sprouts, has been implicated in food poisoning and outbreaks of disease in the United States. Adhesion to cell surfaces is a key component for bacterial establishment and colonization on many types of surfaces. Several E. coli O157:H7 surface proteins are thought to be important for adhesion and/or biofilm formation. Therefore, we examined whether mutations in several genes encoding potential adhesins and regulators of adherence have an effect on bacterial binding to plants and also examined the role of these genes during adhesion to Caco-2 cells and during biofilm formation on plastic in vitro. The genes tested included those encoding adhesins (cah, aidA1, and ompA) and mediators of hyperadherence (tdcA, yidE, waaI, and cadA) and those associated with fimbria formation (csgA, csgD, and lpfD2). The introduction of some of these genes (cah, aidA1, and csg loci) into an E. coli K-12 strain markedly increased its ability to bind to alfalfa sprouts and seed coats. The addition of more than one of these genes did not show an additive effect. In contrast, deletion of one or more of these genes in a strain of E. coli O157:H7 did not affect its ability to bind to alfalfa. Only the absence of the ompA gene had a significant effect on binding, and the plant-bacterium interaction was markedly reduced in a tdcA ompA double mutant. In contrast, the E. coli O157:H7 ompA and tdcA ompA mutant strains were only slightly affected in adhesion to Caco-2 cells and during biofilm formation. These findings suggest that some adhesins alone are sufficient to promote binding to alfalfa and that they may exist in E. coli O157:H7 as redundant systems, allowing it to compensate for the loss of one or more of these systems. Binding to the three types of surfaces appeared to be mediated by overlapping but distinct sets of genes. The only gene which appeared to be irreplaceable for binding to plant surfaces was ompA.     

Linkage between cellular adherence and biofilm formation in Escherichia coli O157:H7 EDL933

During the establishment of Escherichia coli O157:H7 infection, its capacity to adhere to host intestinal epithelial cells is the critical first step in pathogenesis. It also has the capability to form biofilms, and because both are surface activities, we sought to gain insight into a potential linkage between biofilm formation and adherence to epithelial cells. We conducted an adherence assay with 51 biofilm-negative mutants and two human epithelial cell lines, T84 and HEp2. Our results show that unlike wild-type cells, biofilm-negative mutants adhere poorly to epithelial cells. Some adhesin-negative mutants were fully competent in biofilm formation, however. Thus, biofilm-forming activity in E. coli O157:H7 EDL933 is required for adherence to T84 and HEp2 cells, but it is not sufficient.     

Effect of dsp mutations on the cell-to-cell transmission of CsgA in Myxococcus xanthus.

The dsp locus contains genes involved in the subunit synthesis and/or assembly of fibrils that radiate outward from the Myxococcus xanthus cell surface and attach to other cells. The csgA gene encodes an extracellular protein morphogen which is essential for fruiting body development. The question of whether fibrils are involved in the transmission of CsgA to adjacent cells was investigated in three ways. First, the dsp and csgA mutants were mixed in a ratio of 1:1 and allowed to develop; fruiting bodies containing spores derived from the csgA mutant were formed, suggesting efficient CsgA transfer. Second, the csgA mutation affected expression of many developmentally regulated genes differently from the way dsp affected their expression. Third, the expression of one developmentally regulated gene, which was partially expressed in csgA and dsp backgrounds, was almost completely inhibited in the presence of both mutations, suggesting that its promoter is regulated independently by two distinct stimuli, one that is csgA dependent and one that is dsp dependent. Together these results argue that fibrils are not necessary for cell-to-cell transmission or perception of CsgA, and their precise function remains unknown.     

Isolation of an Escherichia coli K-12 Mutant Strain Able To Form Biofilms on Inert Surfaces: Involvement of a New ompR Allele That Increases Curli Expression

Classical laboratory strains of Escherichia coli do not spontaneously colonize inert surfaces. However, when maintained in continuous culture for evolution studies or industrial processes, these strains usually generate adherent mutants which form a thick biofilm, visible with the naked eye, on the wall of the culture apparatus. Such a mutant was isolated to identify the genes and morphological structures involved in biofilm formation in the very well characterized E. coli K-12 context. This mutant acquired the ability to colonize hydrophilic (glass) and hydrophobic (polystyrene) surfaces and to form aggregation clumps. A single point mutation, resulting in the replacement of a leucine by an arginine residue at position 43 in the regulatory protein OmpR, was responsible for this phenotype. Observations by electron microscopy revealed the presence at the surfaces of the mutant bacteria of fibrillar structures looking like the particular fimbriae described by the Olsén group and designated curli (A. Olsén, A. Jonsson, and S. Normark, Nature 338:652–655, 1989). The production of curli (visualized by Congo red binding) and the expression of the csgA gene encoding curlin synthesis (monitored by coupling a reporter gene to its promoter) were significantly increased in the presence of the ompR allele described in this work. Transduction of knockout mutations in either csgA or ompR caused the loss of the adherence properties of several biofilm-forming E. coli strains, including all those which were isolated in this work from the wall of a continuous culture apparatus and two clinical strains isolated from patients with catheter-related infections. These results indicate that curli are morphological structures of major importance for inert surface colonization and biofilm formation and demonstrate that their synthesis is under the control of the EnvZ-OmpR two-component regulatory system.     

Biofilm Formation by Escherichia coli O157:H7 on Stainless Steel: Effect of Exopolysaccharide and Curli Production on Its Resistance to Chlorine

The resistance of Escherichia coli O157:H7 strains ATCC 43895-, 43895-EPS (an exopolysaccharide [EPS]-overproducing mutant), and ATCC 43895+ (a curli-producing mutant) to chlorine, a sanitizer commonly used in the food industry, was studied. Planktonic cells of strains 43895-EPS and/or ATCC 43895+ grown under conditions supporting EPS and curli production, respectively, showed the highest resistance to chlorine, indicating that EPS and curli afford protection. Planktonic cells (ca. 9 log₁₀ CFU/ml) of all strains, however, were killed within 10 min by treatment with 50 μg of chlorine/ml. Significantly lower numbers of strain 43895-EPS, compared to those of strain ATCC 43895-, attached to stainless steel coupons, but the growth rate of strain 43895-EPS on coupons was not significantly different from that of strain ATCC 43895-, indicating that EPS production did not affect cell growth during biofilm formation. Curli production did not affect the initial attachment of cells to coupons but did enhance biofilm production. The resistance of E. coli O157:H7 to chlorine increased significantly as cells formed biofilm on coupons; strain ATCC 43895+ was the most resistant. Population sizes of strains ATCC 43895+ and ATCC 43895- in biofilm formed at 12°C were not significantly different, but cells of strain ATCC 43895+ showed significantly higher resistance than did cells of strain ATCC 43895-. These observations support the hypothesis that the production of EPS and curli increase the resistance of E. coli O157:H7 to chlorine.     

The role of Tir, EspA, and NleB in the colonization of cattle by Shiga toxin producing Escherichia coli O26:H11

Shiga toxin producing Escherichia coli (STEC) O26:H11 is an enteric pathogen capable of causing severe hemorrhagic colitis that can lead to hemolytic uremic syndrome. This organism is able to colonize cattle and human intestinal epithelial cells by secreting effectors via a type III secretion system (T3SS). In this investigation, we examined the role of 2 effectors, Tir and NleB, and the structural translocator component EspA in the adherence of STEC to epithelial cells and in the colonization of cattle. Isogenic deletion mutants were constructed and using microscopy and flow cytometry compared to the wild-type strain in their ability to adhere to HEp-2 cells. A competitive assay was also used to measure the capacity of the mutants to colonize the intestinal tract of cattle, where both the mutant and the parental strains were introduced orally at the same time. Genomic DNA was extracted from enriched fecal samples collected at various time points, and quantitative real-time PCR was used to quantify bacteria. A significant reduction in fecal shedding was observed, and adherence to HEp-2 cells was decreased for the tir and espA mutants. Deletion of the nleB gene did not have a significant effect on the adherence of HEp-2 cells; however, in an in vivo model, it strongly reduced the ability of STEC O26:H11 to colonize the bovine intestinal tract.     

Promiscuous Cross-seeding between Bacterial Amyloids Promotes Interspecies Biofilms

Amyloids are highly aggregated proteinaceous fibers historically associated with neurodegenerative conditions including Alzheimers, Parkinsons, and prion-based encephalopathies. Polymerization of amyloidogenic proteins into ordered fibers can be accelerated by preformed amyloid aggregates derived from the same protein in a process called seeding. Seeding of disease-associated amyloids and prions is highly specific and cross-seeding is usually limited or prevented. Here we describe the first study on the cross-seeding potential of bacterial functional amyloids. Curli are produced on the surface of many Gram-negative bacteria where they facilitate surface attachment and biofilm development. Curli fibers are composed of the major subunit CsgA and the nucleator CsgB, which templates CsgA into fibers. Our results showed that curli subunit homologs from Escherichia coli, Salmonella typhimurium LT2, and Citrobacter koseri were able to cross-seed in vitro. The polymerization of Escherichia coli CsgA was also accelerated by fibers derived from a distant homolog in Shewanella oneidensis that shares less than 30% identity in primary sequence. Cross-seeding of curli proteins was also observed in mixed colony biofilms with E. coli and S. typhimurium. CsgA was secreted from E. coli csgB− mutants assembled into fibers on adjacent S. typhimurium that presented CsgB on its surfaces. Similarly, CsgA was secreted by S. typhimurium csgB− mutants formed curli on CsgB-presenting E. coli. This interspecies curli assembly enhanced bacterial attachment to agar surfaces and supported pellicle biofilm formation. Collectively, this work suggests that the seeding specificity among curli homologs is relaxed and that heterogeneous curli fibers can facilitate multispecies biofilm development.