Sequence of the 68,869 bp IncP-1α plasmid pTB11 from a waste-water treatment plant reveals a highly conserved backbone, a Tn402-like integron and other transposable elements

To analyse the significance of conjugative broad-host-range IncP-1α plasmids for the spread of antibiotic resistance determinants in waste-water treatment plants we isolated and characterised five different IncP-1α plasmids from bacteria of activated sludge and the final effluents of a municipal waste-water treatment plant. These plasmids mediate resistance to ampicillin, cefaclor, cefuroxime, gentamicin, kanamycin, spectinomycin, streptomycin, tetracycline, tobramycin, and trimethoprim. The complete 68,869 bp DNA-sequence of the IncP-1α plasmid pTB11 was determined. The pTB11 backbone modules for replication (Rep), mating pair formation (Trb), multimer resolution (Mrs), post-segregational killing (Psk), conjugative DNA-transfer (Tra), plasmid control (Ctl), and stable maintenance and inheritance (KilA, KilE, and KilC) are highly conserved as compared to the ‘Birmingham’ IncP-1α plasmids. In contrast to the ‘Birmingham’ plasmids pTB11 carries an insert of a Tn402-derivative integrating a class 1 integron in the intergenic region between the multimer resolution operon parCBA and the post-segregational killing operon parDE. The integron comprises the resistance gene cassettes oxa2 (β-lactamase), aacA4 (aminoglycoside-6′N-acetyltransferase), and aadA1 (aminoglycoside-3′-adenylyltransferase) and a complete tniABQR transposition module. Integron-specific sequences were also identified on other IncP-1α plasmids analysed in this work. In contrast to the ‘Birmingham’ plasmids the pTB11 tetracycline resistance module carries a pecM- and a pncA-like gene downstream of the tetracycline resistance gene tetA and contains an insertion of the new insertion sequence element ISTB11. The transposable elements IS21 and Tn1 which disrupted, respectively, orf7 and klcB on the ‘Birmingham’ plasmids are not present on pTB11. Identification of IncP-1α plasmids in bacteria of the waste-water treatment plant’s final effluents indicates that bacteria carrying these kind of plasmids are released into the environment.     

Sequencing and comparative analysis of IncP-1α antibiotic resistance plasmids reveal a highly conserved backbone and differences within accessory regions

Although IncP-1 plasmids are important for horizontal gene transfer among bacteria, in particular antibiotic resistance spread, so far only three plasmids from the subgroup IncP-1α have been completely sequenced. In this study we doubled this number. The three IncP-1α plasmids pB5, pB11 and pSP21 were isolated from bacteria of two different sewage treatment plants and sequenced by a combination of next-generation and capillary sequencing technologies. A comparative analysis including the previously analysed IncP-1α plasmids RK2, pTB11 and pBS228 revealed a highly conserved plasmid backbone (at least 99.9% DNA sequence identity) comprising 54 core genes. The accessory elements of the plasmid pB5 constitute a class 1 integron interrupting the parC gene and an IS6100 copy inserted into the integron. In addition, the tetracycline resistance genes tetAR and the ISTB11-like element are located between the klc operon and the trfA-ssb operon. Plasmid pB11 is loaded with a Tn5053-like mercury resistance transposon between the parCBA and parDE operons and contains tetAR that are identical to those identified in plasmid pB5 and the insertion sequence ISSP21. Plasmid pSP21 harbours an ISPa7 element in a Tn402 transposon including a class 1 integron between the partitioning genes parCBA and parDE. The IS-element ISSP21 (99.89% DNA sequence identity to ISSP21 from pB11), inserted downstream of the tetR gene and a copy of ISTB11 (identical to ISTB11 on pTB11) inserted between the genes pncA and pinR. On all three plasmids the accessory genes are almost always located between the backbone modules confirming the importance of the backbone functions for plasmid maintenance. The striking backbone conservation among the six completely sequenced IncP-1α plasmids is in contrast to the much higher diversity within the IncP-1β subgroup.     

The multiple antibiotic resistance IncP-1 plasmid pKJK5 isolated from a soil environment is phylogenetically divergent from members of the previously established alpha, beta and delta sub-groups

The 54,383bp plasmid pKJK5 was recovered from a soil environment by exogenous plasmid isolation and conveys resistance towards tetracycline and trimethoprim. Sequencing and annotation revealed a high level of structural similarity of the backbone genes to other IncP-1 plasmids containing a Tra1 and Tra2 region, a central control module and a replication initiation module. A considerable degree of divergence was associated with the backbone genes of pKJK5 as compared to homologous genes in the alpha, beta and delta subgroups, which indicates that pKJK5 may belong to a novel subgroup of IncP-1 plasmids, which may also accommodate the partially sequenced non-subgroup classified plasmid pEMT3. Individual backbone genes in pKJK5 have a GC-content, which is consistently lower (average 6.3%) than the homologous genes from the archetype IncP-1beta plasmid R751 indicating homogenous amelioration of IncP-1 plasmid backbone genes. Two discrete accessory elements of 2145bp (load 1) and 11678bp (load 2) respectively are situated between the Tra1 and Tra2 regions of pKJK5, both bounded by inverted repeats and direct flanking repeats indicative of transposon-mediated insertion. Load 1 consists of an insertion sequence ISPa17 and load 2 is a Tn402-derivative containing a class 1 integron, IS1326 and a fragment identical to a region of plasmid pTB11 harboring a tetracycline resistance determinant and part of an IncP-1alphaoriV region.     

Spread and survival of promiscuous IncP-1 plasmids

Plasmids classified to the IncP-1 incompatibility group belong to the most stably maintained mobile elements among low copy number plasmids known to date. The remarkable persistence is achieved by various tightly controlled stability mechanisms like active partitioning, efficient conjugative transfer system, killing of plasmid-free segregants and multimer resolution. The unique feature of IncP-1 plasmids is the central control operon coding for global regulators which control the expression of genes involved in vegetative replication, stable maintenance and conjugative transfer. The multivalent regulatory network provides means for coordinated expression of all plasmid functions. The current state of knowledge about two fully sequenced plasmids RK2 and R751, representatives of the IncP-1alpha and IncP-1beta subgroups, is presented.     

Plasmid pB8 is closely related to the prototype IncP-1beta plasmid R751 but transfers poorly to Escherichia coli and carries a new transposon encoding a small multidrug resistance efflux protein

The IncP-1beta plasmid pB8, which confers resistance to amoxicillin, spectinomycin, streptomycin, and sulfonamides, was previously isolated from a sewage treatment plant. It was found to possess abnormal conjugative transfer properties, i.e., transfer to Escherichia coli by conjugation or electroporation could not be detected. We showed in this study that plasmid pB8 is transferable to E. coli by conjugation, but only at low frequencies and under specific experimental conditions, a phenomenon that is very unusual for IncP-1 plasmids. Determination of the complete 57,198bp pB8 nucleotide sequence revealed that the backbone of the plasmid consists of a complete set of IncP-1beta-specific genes for replication initiation, conjugative plasmid transfer, stable inheritance, and plasmid control with an organisation identical to that of the prototype IncP-1beta plasmid R751. All of the minor differences in the pB8 backbone sequence compared to that of R751 were also found in other IncP-1beta plasmids known to transfer to and replicate in E. coli. Plasmids pB8 and R751 can be distinguished with respect to their accessory genetic elements. First, the pB8 region downstream of the replication initiation gene trfA contains two transposable elements one of which is similar to Tn5501. The latter transposon encodes a putative post-segregational-killing system and the small multidrug resistance (SMR) protein QacF, mediating quaternary ammonium compound resistance. The accessory genes in this region are not responsible for the poor plasmid transfer to E. coli since a pB8 deletion derivative devoid of all genes in that region showed the same conjugative transfer properties as pB8. A Tn5090/Tn402 derivative carrying a class 1 integron is located between the conjugative transfer modules. The Tn5090/Tn402 integration-sites are exactly identical on pB8 and R751 but in contrast to R751 the pB8 element carries the resistance gene cassettes oxa-2 for amoxicillin resistance and aadA4 for streptomycin/spectinomycin resistance, the integron-specific conserved segment consisting of the genes qacEDelta1, sul1, and orf5, and a truncated tni transposition module (tniAB). Although future work will have to determine the molecular basis for the poor transfer of pB8 to E. coli, our findings demonstrate that the host-range of typical IncP-1 plasmids may be less broad than expected.     

Transfer of the conjugal tetracycline resistance transposon Tn916 from Streptococcus faecalis to Staphylococcus aureus and identification of some insertion sites in the staphylococcal chromosome.

The Streptococcus faecalis pheromone-dependent conjugative plasmid pAD1::Tn916 and the membrane filter-dependent conjugative plasmid pPD5::Tn916 were used to introduce Tn916 into Staphylococcus aureus by intergeneric protoplast fusions and intergeneric membrane-filter matings. In recombinants obtained by protoplast fusion where no plasmid DNA could be detected, tetracycline resistance resulted from transposition of Tn916 from pAD1 to the S. aureus chromosome. Transformation analyses showed that S. aureus Tn916 chromosomal insertions occurred near pig, ilv, uraA, tyrB, fus, ala, and the trp operon. DNA hybridization analyses of EcoRI- and HindIII-digested chromosomal DNAs confirmed the diversity of chromosomal sites involved and demonstrated that the inserts were Tn916 insertions rather than integrations of all or part of pAD1::Tn916. Both pAD1::Tn916 and pPD5::Tn916 were transferred to S. aureus by membrane-filter matings. These plasmids remained intact and expressed tetracycline resistance in S. aureus. S. aureus strains carrying pAD1::Tn916, but not a chromosomal insert of Tn916, and any one of several conjugal gentamicin-resistance plasmids lost their ability to serve as conjugal donors of the gentamicin-resistance plasmids.     

The large Bacillus plasmid pTB19 contains two integrated rolling-circle plasmids carrying mobilization functions

Plasmid pTB19 is a 27-kb plasmid originating from a thermophilic Bacillus species. It was shown previously that pTB19 contains an integrated copy of the rolling-circle type plasmid pTB913. Here we describe the analysis of a 4324-bp region of pTB19 conferring resistance to tetracycline. The nucleotide sequence of this region revealed all the characteristics of a second plasmid replicating via the rolling-circle mechanism. This sequence contained (i) the tetracycline resistance marker of pTB19, which is highly similar to other tetL-genes of gram-positive bacteria; (ii) a hybrid mob gene, which bears relatedness to both the mob-genes of pUB110 and pTB913; (iii) a palU type minus origin identical to those of pUB110 and pTB913; and (iv) a plus origin of replication similar to that of pTB913. A repB-type replication initiation gene sequence identical to that of pTB913 was present, which lacked the middle part (492 bp), thus preventing autonomous replication of this region. The hybrid mob gene was functional in conjugative mobilization of plasmids between strains of Bacillus subtilis.     

Paradigms of plasmid organization

Plasmids are extrachromosomal elements built from a selection of generally quite well understood survival and propagation functions, including replication, partitioning, multimer resolution, post-segregational killing and conjugative transfer. Evolution has favoured clustering of these modules to form plasmid cores or backbones. Co-regulation of these core genes can also provide advantages that favour retention of the backbone organization. Tumour-inducing and symbiosis-determining plasmids appear to co-regulate replication and transfer in response to cell density, both being stimulated at high density. Broad-host-range plasmids of the IncP-1 group, on the other hand, have autogenous control circuits, which allow a burst of expression during establishment in a new host, but a minimum of expression during maintenance. The lessons that plasmids have for clustering and co-regulation may explain the logic and organization of many small bacterial genomes currently being investigated.     

Isolation and characterization of antibiotic resistance plasmids from thermophilic bacilli and construction of deletion plasmids

Ten plasmids were isolated as covalently closed circular deoxyribonucleic acid from antibiotic-resistant thermophilic bacteria. Of the 10 plasmids tested, 2 could transform Bacillus subtilis, yielding resistance to specific antibiotics. Plasmid pTB20 (2.8 X 10(6) daltons, approximately 24 copies per chromosome) specifies resistance to tetracycline (Tcr), whereas pTB19 (17.2 X 10(6) daltons, approximately 1 copy per chromosome) renders the host resistant to both kanamycin and tetracycline (KMrTcr). Three plasmids were not self-transmissible. The restriction endonuclease cleavage maps of the two plasmids, pTB19 and pTB20, were constructed. pTB19 and pTB20, both of which were originally isolated from thermophilic bacilli, were tested for stability in B. subtilis. Digestion of pTB19 followed by ligation yielded deletion plasmids pTB512 (Kmr), pTB52 (Tcr), and pTB53 (KmrTcr). Determinants of Kmr, Tcr, and DNA replication were associated with EcoRI fragments R1b (4.2 X 10(6) daltons), R3 (2.8 X 10(6) daltons), and R1a (4.2 X 10(6) daltons), respectively. Restriction endonuclease cleavage maps of pTB51, pTB52, and pTB53 were constructed. Tetracycline resistance of pTB20 was confirmed to be in the EcoRI fragment (1.85 X 10(6) daltons).     

Mutagenesis and chromosome mobilization in Hyphomicrobium facilis B-522.

Spontaneously derived antibiotic-resistant mutants of Hyphomicrobium facilis B-522, a restricted facultative methylotroph, occurred at a high frequency on agar plates with low antibiotic concentrations. Mutants specifically defective in methanol oxidation have been obtained using an allyl alcohol direct selection technique. By chemical mutagenesis with N-methyl-N'-nitro-N-nitrosoguanidine in the presence of chloramphenicol several stable auxotrophic mutants could be isolated: three leucine auxotrophs, two threonine auxotrophs, and two leucine-methionine double auxotrophic mutants. Optimal conditions for transposon mutagenesis have been developed by comparing several transposon delivery vectors. With the suicide plasmid pRK2013 as a vector, the tetracycline resistance conferring transposon Tn5-132 was introduced into the genome of H. facilis B-522. The following insertion mutants have been obtained: leu-3::Tn5-132, ilv-1::Tn5-132, and pur-1::Tn5-132. Broad host range IncP-1 plasmids could be successfully transferred by interspecific matings. Chromosome mobilization was demonstrated with the conjugative IncP-1 plasmids RP1, R68.45, pMO60, and H. facilis 2189 (leu-2, met-1, mox-1, nfs-1, str-12) as recipient strain. Transconjugants occurred at frequencies ranging from 10(-6) to 10(-8) for each marker.     

Combinatorial events of insertion sequences and ICE in Gram-negative bacteria

The emergence of antibiotic and antimicrobial resistance in Gram-negative bacteria is incremental and linked to genetic elements that function in a so-called 'one-ended transposition' manner, including ISEcp1, ISCR elements and Tn3-like transposons. The power of these elements lies in their inability to consistently recognize one of their own terminal sequences, while recognizing more genetically distant surrogate sequences. This has the effect of mobilizing the DNA sequence found adjacent to their initial location. In general, resistance in Gram-negatives is closely linked to a few one-off events. These include the capture of the class 1 integron by a Tn5090-like transposon; the formation of the 3' conserved segment (3'-CS); and the fusion of the ISCR1 element to the 3'-CS. The structures formed by these rare events have been massively amplified and disseminated in Gram-negative bacteria, but hitherto, are rarely found in Gram-positives. Such events dominate current resistance gene acquisition and are instrumental in the construction of large resistance gene islands on chromosomes and plasmids. Similar combinatorial events appear to have occurred between conjugative plasmids and phages constructing hybrid elements called integrative and conjugative elements or conjugative transposons. These elements are beginning to be closely linked to some of the more powerful resistance mechanisms such as the extended spectrum β-lactamases, metallo- and AmpC type β-lactamases. Antibiotic resistance in Gram-negative bacteria is dominated by unusual combinatorial mistakes of Insertion sequences and gene fusions which have been selected and amplified by antibiotic pressure enabling the formation of extended resistance islands.     

Broad-host-range plasmids from agricultural soils have IncP-1 backbones with diverse accessory genes

Broad-host-range plasmids are known to spread genes between distinct phylogenetic groups of bacteria. These genes often code for resistances to antibiotics and heavy metals or degradation of pollutants. Although some broad-host-range plasmids have been extensively studied, their evolutionary history and genetic diversity remain largely unknown. The goal of this study was to analyze and compare the genomes of 12 broad-host-range plasmids that were previously isolated from Norwegian soils by exogenous plasmid isolation and that encode mercury resistance. Complete nucleotide sequencing followed by phylogenetic analyses based on the relaxase gene traI showed that all the plasmids belong to one of two subgroups (β and ε) of the well-studied incompatibility group IncP-1. A diverse array of accessory genes was found to be involved in resistance to antimicrobials (streptomycin, spectinomycin, and sulfonamides), degradation of herbicides (2,4-dichlorophenoxyacetic acid and 2,4-dichlorophenoxypropionic acid), and a putative new catabolic pathway. Intramolecular transposition of insertion sequences followed by deletion was found to contribute to the diversity of some of these plasmids. The previous observation that the insertion sites of a Tn501-related element are identical in four IncP-1β plasmids (pJP4, pB10, R906, and R772) was further extended to three more IncP-1β plasmids (pAKD15, pAKD18, and pAKD29). We proposed a hypothesis for the evolution of these Tn501-bearing IncP-1β plasmids that predicts recent diversification followed by worldwide spread. Our study increases the available collection of complete IncP-1 plasmid genome sequences by 50% and will aid future studies to enhance our understanding of the evolution and function of this important plasmid family.     

Transformation of Bacillus stearothermophilus with plasmid DNA and characterization of shuttle vector plasmids between Bacillus stearothermophilus and Bacillus subtilis.

A thermophilic bacterium Bacillus stearothermophilus IFO 12550 (ATCC 12980) was transformed with each of the following plasmids, pUB110 (kanamycin resistance, Kmr), pTB19 (Kmr and tetracycline resistance [Tcr]), and its derivative pTB90 (Kmr Tcr), by the protoplast procedure in the presence of polyethylene glycol at 48 degrees C. The transformation frequencies per regenerant for pUB110, pTB19, and pTB90 were 5.9 x 10(-3), 5.5 x 10(-3), and 2.0 x 10(-1), respectively. Among these plasmids, pTB90 was newly derived, and the restriction endonuclease cleavage map was constructed. When tetracycline (5 micrograms/ml) was added into the culture medium, the copy number of pTB90 in B. stearothermophilus was about fourfold higher than that when kanamycin (5 micrograms/ml) was added instead of tetracycline. Bacillus subtilis could also be transformed with the plasmids extracted from B. stearothermophilus and vice versa. Accordingly, pUB110, pTB19, and pTB90 served as shuttle vectors between B. stearothermophilus and B. subtilis. The requirements for replication of pTB19 in B. subtilis and B. stearothermophilus appear to be different, because some deletion plasmids (pTB51, pTB52, and pTB53) derived from pTB19 could replicate only in B. subtilis, whereas another deletion plasmid pTB92 could replicate solely in B. stearothermophilus. Plasmids pTB19 and pTB90 could be maintained and expressed in B. stearothermophilus up to 65 degrees C, whereas the expression of pUB110 in the same strain was up to 55 degrees C.     

Molecular cloning into Tn5 and integration in the Pseudomonas aeruginosa chromosome: a tool for heterologous gene expression

The DNA primase gene of the promiscuous IncP-1 conjugative plasmid RP1, encoding two polypeptides of 118 and 80 kDa, was inserted into the transposon Tn5 in Escherichia coli. The derivative transposon, Tn2523, was then transposed to a temperature-sensitive replication mutant of the promiscuous IncP-1 conjugative plasmid R68 at permissive temperature and the plasmid transferred to Pseudomonas aeruginosa strain PAO. The latter strain was then grown at non-permissive temperature to identify transposition of Tn2523 into the P. aeruginosa chromosome. Immunological and enzymic analysis showed the expression of functional primase polypeptides in the constructed P. aeruginosa strain. This strain also restored wild-type conjugational transfer proficiency, by complementation, to mutants of the IncP-1 plasmid R18 affected in transfer from P. aeruginosa to P. stutzeri or to Acinetobacter calcoaceticus due to transposon Tn7 insertion mutations in the primase gene. This strategy of cloning into a transposon and integration into the bacterial chromosome should facilitate genetic manipulation and studies of gene expression in a range of Gram-negative bacteria.     

Transposon Tn21, flagship of the floating genome.

The transposon Tn21 and a group of closely related transposons (the Tn21 family) are involved in the global dissemination of antibiotic resistance determinants in gram-negative facultative bacteria. The molecular basis for their involvement is carriage by the Tn21 family of a mobile DNA element (the integron) encoding a site-specific system for the acquisition of multiple antibiotic resistance genes. The paradigm example, Tn21, also carries genes for its own transposition and a mercury resistance (mer) operon. We have compiled the entire 19,671-bp sequence of Tn21 and assessed the possible origins and functions of the genes it contains. Our assessment adds molecular detail to previous models of the evolution of Tn21 and is consistent with the insertion of the integron In2 into an ancestral Tn501-like mer transposon. Codon usage analysis indicates distinct host origins for the ancestral mer operon, the integron, and the gene cassette and two insertion sequences which lie within the integron. The sole gene of unknown function in the integron, orf5, resembles a puromycin-modifying enzyme from an antibiotic producing bacterium. A possible seventh gene in the mer operon (merE), perhaps with a role in Hg(II) transport, lies in the junction between the integron and the mer operon. Analysis of the region interrupted by insertion of the integron suggests that the putative transposition regulator, tnpM, is the C-terminal vestige of a tyrosine kinase sensor present in the ancestral mer transposon. The extensive dissemination of the Tn21 family may have resulted from the fortuitous association of a genetic element for accumulating multiple antibiotic resistances (the integron) with one conferring resistance to a toxic metal at a time when clinical, agricultural, and industrial practices were rapidly increasing the exposure to both types of selective agents. The compendium offered here will provide a reference point for ongoing observations of related elements in multiply resistant strains emerging worldwide.     

Transposon Tn21, Flagship of the Floating Genome

The transposon Tn21 and a group of closely related transposons (the Tn21 family) are involved in the global dissemination of antibiotic resistance determinants in gram-negative facultative bacteria. The molecular basis for their involvement is carriage by the Tn21 family of a mobile DNA element (the integron) encoding a site-specific system for the acquisition of multiple antibiotic resistance genes. The paradigm example, Tn21, also carries genes for its own transposition and a mercury resistance (mer) operon. We have compiled the entire 19,671-bp sequence of Tn21 and assessed the possible origins and functions of the genes it contains. Our assessment adds molecular detail to previous models of the evolution of Tn21 and is consistent with the insertion of the integron In2 into an ancestral Tn501-like mer transposon. Codon usage analysis indicates distinct host origins for the ancestral mer operon, the integron, and the gene cassette and two insertion sequences which lie within the integron. The sole gene of unknown function in the integron, orf5, resembles a puromycin-modifying enzyme from an antibiotic producing bacterium. A possible seventh gene in the mer operon (merE), perhaps with a role in Hg(II) transport, lies in the junction between the integron and the mer operon. Analysis of the region interrupted by insertion of the integron suggests that the putative transposition regulator, tnpM, is the C-terminal vestige of a tyrosine kinase sensor present in the ancestral mer transposon. The extensive dissemination of the Tn21 family may have resulted from the fortuitous association of a genetic element for accumulating multiple antibiotic resistances (the integron) with one conferring resistance to a toxic metal at a time when clinical, agricultural, and industrial practices were rapidly increasing the exposure to both types of selective agents. The compendium offered here will provide a reference point for ongoing observations of related elements in multiply resistant strains emerging worldwide.     

Conjugative Mobilization of the Rolling-Circle Plasmid pIP823 from Listeria monocytogenes BM4293 among Gram-Positive and Gram-Negative Bacteria

We determined the sequence and genetic organization of plasmid pIP823, which contains the dfrD gene; dfrD confers high-level trimethoprim resistance to Listeria monocytogenes BM4293 by synthesis of dihydrofolate reductase type S2. pIP823 possessed all the features of the pUB110/pC194 plasmid family, whose members replicate by the rolling-circle mechanism. The rep gene encoded a protein identical to RepU, the protein required for initiation of the replication of plasmids pTB913 from a thermophilic Bacillus sp. and pUB110 from Staphylococcus aureus. The mob gene encoded a protein with a high degree of amino acid identity with the Mob proteins involved in conjugative mobilization and interplasmidic recombination of pTB913 and pUB110. The host range of pIP823 was broad and included L. monocytogenes, Enterococcus faecalis, S. aureus, Bacillus subtilis, and Escherichia coli. In all these species, pIP823 replicated by generating single-stranded DNA and was stable. Conjugative mobilization of pIP823 was obtained by self-transferable plasmids between L. monocytogenes and E. faecalis, between L. monocytogenes and E. coli, and between strains of E. coli, and by the streptococcal conjugative transposon Tn1545 from L. monocytogenes to E. faecalis, and from L. monocytogenes and E. faecalis to E. coli. These data indicate that the gene flux observed in nature from gram-positive to gram-negative bacteria can occur by conjugative mobilization. Our results suggest that dissemination of trimethoprim resistance in Listeria spp. and acquisition of other antibiotic resistance determinants in this species can be anticipated.     

Functional identification of conjugation and replication regions of the tetracycline resistance plasmid pCW3 from Clostridium perfringens

Clostridium perfringens causes fatal human infections, such as gas gangrene, as well as gastrointestinal diseases in both humans and animals. Detailed molecular analysis of the tetracycline resistance plasmid pCW3 from C. perfringens has shown that it represents the prototype of a unique family of conjugative antibiotic resistance and virulence plasmids. We have identified the pCW3 replication region by deletion and transposon mutagenesis and showed that the essential rep gene encoded a basic protein with no similarity to any known plasmid replication proteins. An 11-gene conjugation locus containing 5 genes that encoded putative proteins with similarity to proteins from the conjugative transposon Tn916 was identified, although the genes' genetic arrangements were different. Functional genetic studies demonstrated that two of the genes in this transfer clostridial plasmid (tcp) locus, tcpF and tcpH, were essential for the conjugative transfer of pCW3, and comparative analysis confirmed that the tcp locus was not confined to pCW3. The conjugation region was present on all known conjugative plasmids from C. perfringens, including an enterotoxin plasmid and other toxin plasmids. These results have significant implications for plasmid evolution, as they provide evidence that a nonreplicating Tn916-like element can evolve to become the conjugation locus of replicating plasmids that carry major virulence genes or antibiotic resistance determinants.     

The 79,370-bp conjugative plasmid pB4 consists of an IncP-1beta backbone loaded with a chromate resistance transposon,the strA-strB streptomycin resistance gene pair,the oxacillinase gene bla(NPS-1), and a tripartite antibiotic efflux system of the resistance-nodulation-division family

Plasmid pB4 is a conjugative antibiotic resistance plasmid, originally isolated from a microbial community growing in activated sludge, by means of an exogenous isolation method with Pseudomonas sp. B13 as recipient. We have determined the complete nucleotide sequence of pB4. The plasmid is 79,370 bp long and contains at least 81 complete coding regions. A suite of coding regions predicted to be involved in plasmid replication, plasmid maintenance, and conjugative transfer revealed significant similarity to the IncP-1beta backbone of R751. Four resistance gene regions comprising mobile genetic elements are inserted in the IncP-1beta backbone of pB4. The modular 'gene load' of pB4 includes (1) the novel transposon Tn 5719 containing genes characteristic of chromate resistance determinants, (2) the transposon Tn 5393c carrying the widespread streptomycin resistance gene pair strA-strB, (3) the beta-lactam antibiotic resistance gene bla(NPS-1) flanked by highly conserved sequences characteristic of integrons, and (4) a tripartite antibiotic resistance determinant comprising an efflux protein of the resistance-nodulation-division (RND) family, a periplasmic membrane fusion protein (MFP), and an outer membrane factor (OMF). The components of the RND-MFP-OMF efflux system showed the highest similarity to the products of the mexCD-oprJ determinant from the Pseudomonas aeruginosa chromosome. Functional analysis of the cloned resistance region from pB4 in Pseudomonas sp. B13 indicated that the RND-MFP-OMF efflux system conferred high-level resistance to erythromycin and roxithromycin resistance on the host strain. This is the first example of an RND-MFP-OMF-type antibiotic resistance determinant to be found in a plasmid genome. The global genetic organization of pB4 implies that its gene load might be disseminated between bacteria in different habitats by the combined action of the conjugation apparatus and the mobility of its component elements.