Covariation between forelimb muscle anatomy and bone shape in an Australian scratch-digging marsupial: Comparison of morphometric methods

The close association between muscle and bone is broadly intuitive; however, details of the covariation between the two has not been comprehensively studied. Without quantitative understanding of how muscle anatomy influences bone shape, it is difficult to draw conclusions of the significance of many morphological traits of the skeleton. In this study, we investigated these relationships in the Quenda (Isoodon fusciventer), a scratch-digging marsupial. We quantified the relationships between forelimb muscle anatomy and bone shape for animals representing a range of body masses (124–1,952 g) using two-block partial least square analyses. Muscle anatomy was quantified as muscle mass and physiological cross-sectional area (PCSA), and we used two morphometric methods to characterize bone shape: seven indices of linear bone proportions, and landmarks analysis. Bone shape was significantly correlated with body mass, reflecting allometric bone growth. Of the seven bone indices, only shoulder moment index (SMI) and ulna robustness index (URI) showed a significant covariation with muscle anatomy. Stronger relationships between muscle anatomy and forelimb bone shape were found using the landmark coordinates: muscle mass and PCSA were correlated with the geometric shape of the scapula, humerus, and third metacarpal, but to a lesser extent with shape of the ulna. Overall, our data show that landmark coordinates are more sensitive than bone indices to capturing shape changes evident throughout ontogeny, and is therefore a more appropriate method to investigate covariation with forelimb muscle anatomy. Single-species studies investigating ontogeny require refined methods to accurately develop understanding of the important relationships between muscle force generation and bone shape remodeling. Landmark analyses provide such a method.     

A model of temporomandibular joint function in anthropoid primates based on condylar movements during mastication

The hypothesis that the shape of the bony temporomandibular joint (TMJ) is functionally related to sagittal sliding of the condyle during mastication is tested, and a model of the relation of sagittal sliding to mandibular size, TMJ shape, and diet is developed. Sagittal sliding is defined as fore-aft motion of the condyle during mandibular translation and/or angular rotation. Ascending ramus height is used as a structural correlate of the distance between the condyle and the mandibular axis of rotation (CR). Cineradiographic data on sagittal sliding and gape during mastication in Ateles spp., Macaca fascicularis, Papio anubis, and Pan troglodytes in conjunction with comparative data on mandibular size and TMJ shape are used to evaluate the hypothesis. The results show that 1) linear and angular gape are highly positively correlated with sagittal sliding, 2) pure mandibular translation is rare during mastication, 3) the CR is rarely if ever located at the condyle during mastication, 4) angular gape should be standardized in interindividual comparisons of sagittal sliding, and 5) the height of the ascending ramus (and by inference the CR-to-condyle distance) is highly positively correlated with absolute sagittal sliding. Sagittal sliding relative to the length of the articular eminence was the variable used to explore the relation between TMJ shape and sliding. This variable standardized absolute sagittal sliding relative to joint size. The relative depth and orientation of the articular eminence were not correlated with relative sagittal sliding. The anteroposterior curvature of the condyle was highly negatively correlated with relative sagittal sliding. Flat condyles are associated with large amounts of relative sagittal sliding. A flat condyle increases joint contact area, which reduces joint stress. A flat condyle also increases joint congruence, and this may facilitate the combined sliding and rolling motion of the condyle when the sliding motion is relatively large. The shape of the entoglenoid process was also positively correlated with relative sagittal sliding. A relatively large entoglenoid process may help to guide sagittal sliding and prevent excessive mediolateral sliding of the condyle. The functional model makes a number of predictions about the correlations between food consistency and food object size, mandibular size, TMJ shape, and sagittal sliding of the condyle during mastication and incision. Am J Phys Anthropol 109:67–88, 1999. © 1999 Wiley-Liss, Inc.     

Relationships between geometry and kinematic characteristics in the temporomandibular joint

Motions of the temporomandibular joint (TMJ) involve both translation and rotation; however, there may be substantial variations from one human to another, and these variations present significant difficulties when designing TMJ prostheses. The disc–condyle glides along the temporal bone and the condyle centre describe a curve that depends on the individual morphology.

This study analyses disc–condyle rotatory and translatory displacements moving all along the temporal bone facets which are mainly composed of two areas: the articular tubercle slope (ATS) and the preglenoid plane separated by the articular tubercle crest. Displacements were quantified using 3D video analysis, and this technique was computer-assisted.

From a population of 32 volunteers, we were able to establish a correlation between the kinematic characteristics of the joint and the disc–condyle trajectories. This study quantifies the geometrical characteristics of the ATS and their inter-individual variations, which are useful in TMJ prosthesis design.     

Histological, histometrical and fluoride electrode studies of the effects of fluoride on the mandibular condyles in growing newborn rats

The effects of fluoride on the mandibular condyles in growing newborn rats were studied by histological, histometrical and fluoride electrode methods. The layer of cartilage of the mandibular condyle in the animals administered 5, 15, 25 and 35 mg/kg of fluoride for 3 weeks displayed a significant increase in thickness when compared with that of the mandibular condyle in the control animals. The thickening of the cartilage layer was proportioned to the amounts of fluoride administered. The volumetric density of cancellous bone of the condyle in the animals administered 25 and 35 mg/kg of fluoride also increased significantly when compared with that of the condyle in the control animals. The trabeculae of cancellous bone of the condyle in these animals contained large amounts of osteoid. The cancellous bone of the condyle in the animals of the four fluoride groups showed a significantly higher fluoride concentration when compared with that of the condyle in the control animals. The fluoride concentration proportionally increased with the amounts of fluoride administered. The results of the present study indicate that the morphologic changes and the fluoride concentrations in the mandibular condyles of rats receiving fluoride were closely correlated with each other.     

Variations in mineralization affect the stress and strain distributions in cortical and trabecular bone

The mechanical properties of bone depend largely on its degree and distribution of mineralization. The present study analyzes the effect of an inhomogeneous distribution of mineralization on the stress and strain distributions in the human mandibular condyle during static clenching. A condyle was scanned with a micro-CT scanner to create a finite element model. For every voxel the degree of mineralization (DMB) was determined from the micro-CT scan. The Young's moduli of the elements were calculated from the DMB using constant, linear, and cubic relations, respectively. Stresses, strains, and displacements in cortical and trabecular bone, as well as the condylar deformation (extension along the antero-posterion axis) and compliance were compared. Over 90% of the bone mineral was located in the cortical bone. The DMB showed large variations in both cortical bone (mean: 884, SD: 111 mg/cm(3)) and trabecular bone (mean: 738, SD: 101 mg/cm(3)). Variations of the stresses and the strains were small in cortical bone, but large in trabecular bone. In the cortical bone an inhomogeneous mineral distribution increased the stresses and the strains. In the trabecular bone, however, it decreased the stresses and increased the strains. Furthermore, the condylar compliance remained relatively constant, but the condylar deformation doubled. It was concluded that neglect of the inhomogeneity of the mineral distribution results in a large underestimation of the stresses and strains of possibly more than 50%. The stiffness of trabecular bone strongly influences the condylar deformation. Vice versa, the condylar deformation largely determines the magnitude of the strains in the trabecular bone.     

Interpretation of scanning electron microscopic images of abraded forming bone surfaces

The experimental abrasion of forming bone surfaces was conducted so that such surfaces could be characterized. This is particularly important to bone remodeling studies utilizing scanning electron microscope (SEM) imaging of archeological material. Forming surfaces derived from subadult macaque cranial bone were treated by particle abrasion, water abrasion, sliding abrasion, brushing, manual rubbing, weight, exfoliation, chipping and replication. Acetic acid treatments were also performed. The effects of abrasive agents are specific but generally fall into rough (particle and water abrasion) and smooth (sliding abrasion, brushing, rubbing and weight) categories. Protohistoric human and Plio-Pleistocene hominid subadult craniofacial remains were observed with the SEM for comparison with experimental data. The more recent material appeared smooth, probably as a result of specimen preparation procedures using brushes. Surfaces were still interpretable as forming, however, using a more abrasion-resistant feature called intervascular ridging (IVR) described in this study. The IVR pattern is also recognized on the hominid sample, confirming the possibility of performing remodeling studies on abraded fossil material. The abrasion characteristics are somewhat more difficult to classify, however. Abrasion is defined and discussed relative to remodeling studies and taphonomy. The usefulness of the experimental data reported here, however, in paleoenvironmental reconstruction, has yet to be fully realized. Acid and mechanical preparation techniques are briefly addressed. It is concluded that it is possible to characterize a forming surface as abraded according to the findings of this study and that acid, if handled with care, will more likely preserve microanatomical surface detail. It would also be in everyone's interest to employ a less abrasive cleaning regime on archeological specimens.     

In vivo determination of normal and anterior cruciate ligament-deficient knee kinematics

The objective of the current study was to use fluoroscopy to accurately determine the three-dimensional (3D), in vivo, weight-bearing kinematics of 10 normal and five anterior cruciate ligament deficient (ACLD) knees. Patient-specific bone models were derived from computed tomography (CT) data. 3D computer bone models of each subject's femur, tibia, and fibula were recreated from the CT 3D bone density data. Using a model-based 3D-to-2D imaging technique registered CT images were precisely fit onto fluoroscopic images, the full six degrees of freedom motion of the bones was measured from the images. The computer-generated 3D models of each subject's femur and tibia were precisely registered to the 2D digital fluoroscopic images using an optimization algorithm that automatically adjusts the pose of the model at various flexion/extension angles. Each subject performed a weight-bearing deep knee bend while under dynamic fluoroscopic surveillance. All 10 normal knees experienced posterior femoral translation of the lateral condyle and minimal change in position of the medial condyle with progressive knee flexion. The average amount of posterior femoral translation of the lateral condyle was 21.07 mm, whereas the average medial condyle translation was 1.94 mm, in the posterior direction. In contrast, all five ACLD knees experienced considerable change in the position of the medial condyle. The average amount of posterior femoral translation of the lateral condyle was 17.00 mm, while the medial condyle translation was 4.65 mm, in the posterior direction. In addition, the helical axis of motion was determined between maximum flexion and extension. A considerable difference was found between the center of rotation locations of the normal and ACLD subjects, with ACLD subjects exhibiting substantially higher variance in kinematic patterns.     

The evaluation of knee bone mineral density following open-wedge high tibial osteotomy

Examinations of bone density changes in selected knee bone ends were evaluated prospectively in a randomized group of 28 patients, aged from 41 to 65 (mean: 55.3 years), who had varus deformations of their mechanic limb axes, mean 8 degrees. The examinations were conducted during the preoperative period, 10 days, 3, 6, and 12 weeks, as well as 6 and 12 months after the procedure. A statistically significant increase in bone density was observed in the medial tibial condyle area, while a statistically insignificant decrease of bone density was noted in the medial femoral condyles. Bone density increased in the lateral tibial condyle area, whereas there were no density changes in the area of the lateral femoral condyles. The research results demonstrate that the relief achieved in ailments after high tibial osteotomies does not directly correspond to the bone density of the affected areas.     

Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic

The objective of the present study was (1) to test the hypothesis that the elastic and failure properties of the cancellous bone of the mandibular condyle depend on the loading direction, and (2) to relate these properties to bone density parameters. Uniaxial compression tests were performed on cylindrical specimens (n=47) obtained from the condyles of 24 embalmed cadavers. Two loading directions were examined, i.e., a direction coinciding with the predominant orientation of the plate-like trabeculae (axial loading) and a direction perpendicular to the plate-like trabeculae (transverse loading). Archimedes' principle was applied to determine bone density parameters. The cancellous bone was in axial loading 3.4 times stiffer and 2.8 times stronger upon failure than in transverse loading. High coefficients of correlation were found among the various mechanical properties and between them and the apparent density and volume fraction. The anisotropic mechanical properties can possibly be considered as a mechanical adaptation to the loading of the condyle in vivo.     

Changes in mechanical properties of bone within the mandibular condyle with age

The purpose of the study was to compare indentation modulus (IM) and hardness of condylar bone in young and adult dogs. In addition we desired to examine histologic sections for bone formation activity in the two groups. Mandibular condyles were obtained from adult (1- to 2-year-old) and young (approximately 5-m old) dogs. Two sections/condyle were obtained and one was processed for histomorphometry and the other for mechanical analyses. Indents were made on moist condylar trabecular bone to a depth of 500 nm at a loading rate of 10 nm/s using a custom-made hydration system to obtain IM and hardness. Histomorphometric analyses measured the bone volume/total volume (BV/TV%) and ratio of labeled to unlabeled bone within the condyle. Data were analyzed using a repeated-measures factorial analysis of variance and Tukey-Kramer method. Overall, the IM of the adult condyles (10.0+/-3.4 GPa, Mean+/-SD) were significantly (P<0.0001) higher than in young dogs (5.6+/-2.6 GPa). There was a greater bone mass in the young (60.2%) versus the adult condyles (42%). Also, significantly more labeled bone in the young (66.1%) condylar bone suggested higher bone forming activity than in adult condyles (27.5%). With age there is a change in mass and material properties in the trabecular bone of the mandibular condyle in dogs.     

Correlation between MRI evidence of degenerative condylar surface changes, induction of articular disc displacement and pathological joint sounds in the temporomandibular joint

Objectives: The relationship of bony changes in the condylar surfaces in articular disc displacement without reduction in temporomandibular joint (TMJ) was investigated using diagnostic imaging. The study also evaluated whether the bony changes in the condylar surfaces limit disc and condyle motion, and produce pathological joint sounds. Materials and methods: Thirty‐seven joints in 28 patients diagnosed with degenerative bony changes in the condylar surfaces radiographically and anterior disc displacement without reduction using magnetic resonance imaging (MRI) were studied. The bony changes were assessed by radiographic examination and classified into two types: pathological bone changes (PBCs) including erosion, osteophyte formation and deformity, and adaptive bone changes (ABCs) including flattening and concavity. MRI was performed on the TMJ to examine the configuration and position of the discs. Joint sounds in the TMJ were determined using electrovibratograghy with a joint vibration analysis. Results: The articular disc motion to the condyle in the PBC group was smaller than in the ABC group irrespective of the configuration of the disc, even though there were no significant differences between the two types of bony changes in the disc position during jaw closing. The joint vibration analysis of the TMJ showed that joint sounds with a higher frequency were observed in the PBC group than in the ABC group. High energy levels needed to produce the higher frequencies (over 300 Hz) were observed only in the PBC group.     

Variation in condylar morphology in different malocclusion among Indians

Temporo-mandibular joint (TMJ) joint and the condyle of mandible are observed in the radiographs of the skull and the jaw. Therefore, it is of interest to assess the predictability of four different shapes of condyle in skeletal class I, II and III malocclusion. The four commonly visualized shapes are oval, bird beak, diamond and crooked were assessed using an ortho pantomogram (OPG). Each of the malocclusion was visualized for different shapes of the condyle. 987 OPGs were radiographically evaluated and the morphology of 1974 condylar heads was visualized. The shapes of the condyles were grouped under four different types. Data shows that oval shaped condyle was most common followed by bird beak. There was variability in the diamond and crooked shape and was lesser than the other types. Thus, the shapes of the condyle are useful predictable guide in deciding the nature of the occlusion.     

Quantifying Abrasion of Stable Substrata in Streams: A New Disturbance Index for Epilithic Biota

Abrasion is a significant disturbing force to which the streambed epilithic biota is exposed during high flow periods. However, abrasion of biota in the field has not been measured, and effects of abrasion on biota are usually inferred. We describe a method that quantifies abrasion of a standardised substrate in the field. This provides an index of the level of abrasion to which flora and fauna are exposed. The method uses autoclaved lightweight aerated concrete (ALC) blocks that are fixed in place on the streambed and subsequently abraded. Two methods were used to quantify abrasion: the change in mass of the block from before to after deployment, and the reduction in cross-sectional area of the corners of the blocks as measured by image analysis. We performed preliminary trials in the laboratory to quantify the amount of work required to remove mass from the blocks. These measurements confirmed that ALC was a consistent substrate with regards to the amount of work required to remove a given mass. The technique was field-tested during a year-long survey at six sites in the Acheron valley, south-eastern Australia. Blocks were deployed for approximately 2 months at a time at each of six sites. The method was able to distinguish average differences in abrasion between trials and sites, but neither of these factors was constant. The variability of abrasion within sites was also high. Results show that the technique in its current form can be used to provide an index of the amount of abrasion to which the epilithic biota is exposed in streams and rivers. An assessment of the strengths and weaknesses of the technique is provided, and suggestions made for further improvements and research.     

Intrauterine growth restriction affects bone mineral density of the mandible and the condyle in growing rats

Objectives:To investigate in growing rats the effect of intrauterine growth restriction (IUGR) on the bone mineral density of the mandible and tibia, as well as the quality of the mandibular and condylar bone.Methods:Twelve male rats were born IUGR by mothers sustaining 50% food restriction during pregnancy. Twelve control male rats were born by mothers fed ad libitum. Dual-energy X-ray absorptiometry (DEXA) of the tibia, proximal tibial metaphysis and the mandible, biochemical markers, histology and histomorphometrical analysis on the mandibular and subchondral bone of the condyle were performed.Results:IUGR significantly affected bone mineral density (BMD) of both tibial and mandibular bones. IUGR rats had significantly lower osteocalcin values (p=0.021) and phosphorus (p=0.028), but not 25-OH vitamin D (p=0.352). Bone area percentage in the mandible was significantly lower (51.21±5.54) in IUGR compared to controls (66.00±15.49), and for subchondral bone of the condyle for IUGR (47.01±6.82) compared to controls (68.27±13.37). IUGR had a significant reduction in the fibrous layer, but not the proliferating layer, with the hypertrophic layer significantly increased.Conclusion:Maternal restricted nutrition during gestation can affect BMD of the mandible and the tibia of the offspring animals.     

Effect of alendronate on endochondral ossification in mandibular condyles of growing rats

The replacement of the calcified cartilage by bone tissue during the endochondral ossification of the mandibular condyle is dependent of the resorbing activity of osteoclats. After partial resorption, calcified cartilage septa are covered by a primary bone matrix secreted by osteoblasts. Osteoadherin (OSAD) is a small proteoglycan present in bone matrix but absent in cartilage during the endochondral ossification. The aim of this study was to analyze the effect of alendronate, a drug known to inhibit bone resorption by osteoclasts, on the endochondral ossification of the mandibular condyle of young rats, by evaluating the distribution of osteoclasts and the presence of OSAD in the bone matrix deposited. Wistar newborn rats (n=45) received daily injections of alendronate (n=27) or sterile saline solution as control (n=18) from the day of birth until the ages of 4, 14 and 30 days. At the days mentioned, the mandibular condyles were collected and processed for transmission electron microscopy analysis. Specimens were also submitted to tartrate resistant acid phosphatase (TRAP) histochemistry and ultrastructural immunodetection of OSAD. Alendronate treatment did not impede the recruitment and fusion of osteoclasts at the ossification zone during condyle growth, but they presented inactivated phenotype. The trabeculae at the ossification area consisted of cartilage matrix covered by a layer of primary bone matrix that was immunopositive to OSAD at all time points studied. Apparently, alendronate impeded the removal of calcified cartilage and maturation of bone trabeculae in the mandibular ramus, while in controls they occurred normally. These findings highlight for giving attention to the potential side-effects of bisphosphonates administered to young patients once it may represent a risk of disturbing maxillofacial development.     

A Tachyglossid-Like Humerus from the Early Cretaceous of South-Eastern Australia

A partial right humerus has been recovered from the Early Cretaceous (Albian) Eumeralla Formation at Dinosaur Cove in south-eastern Australia. General morphology, size and the presence of a single epicondylar foramen (the entepicondylar) suggest that the bone is from a mammal or an advanced therapsid reptile. The humerus is similar in size, shape and torsion to the equivalent bone of extant and late Neogene echidnas (Tachyglossidae) but, contrary to the situation in extant monotremes, in which the ulna and radius articulate with a single, largely bulbous condyle, it bears a shallow, pulley-shaped (i.e. trochlear-form) ulnar articulation that is confluent ventro-laterally with the bulbous radial condyle. This form of ulnar articulation distinguishes this bone from the humeri of most advanced therapsids and members of several major groups of Mesozoic mammals, which have a condylar ulnar articulation, but parallels the situation found in therian mammals and in some other lineages of Mesozoic mammals. As in extant monotremes the distal humerus is greatly expanded transversely and humeral torsion is strong. Transverse expansion of the distal humerus is evident in the humeri of the fossorial docodont Haldanodon, highly-fossorial talpids and some clearly fossorial dicynodont therapsids, but the fossil shows greatest overall similarity to extant monotremes and it is possible that the peculiar elbow joint of extant monotremes evolved from a condition approximating that of the fossil. On the basis of comparisons with Mesozoic and Cainozoic mammalian taxa in which humeral morphology is known, the Dinosaur Cove humerus is tentatively attributed to a monotreme. However, several apparently primitive features of the bone exclude the animal concerned from the extant families Tachyglossidae and Ornithorhynchidae and suggest that, if it is a monotreme, it is a stem-group monotreme. Whatever, the animal's true affinity, the gross morphology of its humerus indicates considerable capacity for rotation-thrust digging.     

单端固定式下颌骨修复体的应力分析

目的:针对包括一侧髁状突的下颌骨缺损,通过有限元应力分析,了解单端固定式下颌骨修复体在功能运动时的受力与变形规律,以期寻求更加合理的修复体的设计和固定方式。方法:建立下颌骨断端和修复体的简易三维模型,模拟咀嚼运动,施加垂直方向载荷,进行有限元法应力分析,计算出该模型各组成部分的应力分布和受力变形。结果:在该模型加载时,延伸板基部和近断端处上部的螺钉颈部是应力集中的部位,近断端处下部的螺钉颈部和修复体的远端舌侧为形变最大的部位。结论:单端固定式下颌骨修复体在加载时,延伸板的基部和靠近断端的固定螺钉是应力集中的部位,修复体远离固定的一侧是变形最大的部位,提示我们应将延伸板形态设计为尽可能加宽,并应增加下颌骨下缘处的固定,使修复体与下颌骨断端受力更加合理,变形也尽可能缩小。     

The relationship between lateral meniscus shape and joint contact parameters in the knee: a study using data from the Osteoarthritis Initiative

Introduction

The meniscus has an important role in force transmission across the knee, but a detailed three-dimensional (3D) morphometric shape analysis of the lateral meniscus to elucidate subject-specific function has not been conducted. The aim of this study was to perform 3D morphometric analyses of the lateral meniscus in order to correlate shape variables with anthropometric parameters, thereby gaining a better understanding of the relationship between lateral meniscus shape and its load-bearing function.

Methods

The lateral meniscus (LM) was manually segmented from magnetic resonance images randomly selected from the Osteoarthritis Initiative (OAI) non-exposed control subcohort. A 3D statistical shape model (SSM) was constructed to extract the principal morphological variations (PMV) of the lateral meniscus for 50 subjects (25 male and 25 female). Correlations between the principal morphological variations and anthropometric parameters were tested. Anthropometric parameters that were selected included height, weight, body mass index (BMI), femoral condyle width and axial rotation.

Results

The first principal morphological variation (PMV) was found to correlate with height (r = 0.569), weight (r = 0.647), BMI (r = 0.376), and femoral condyle width (r = 0.622). The third PMV was found to correlate with height (r = 0.406), weight (r = 0.312), and femoral condyle width (r = 0.331). The percentage of the tibial plateau covered by the lateral meniscus decreases as anthropometric parameters relating to size of the subject increase. Furthermore, when the size of the subject increases, the posterior and anterior horns become proportionally longer and wider.

Conclusion

The correlations discovered suggest that variations in meniscal shape can be at least partially explained by the levels of loads transmitted across the knee on a regular basis. Additionally, as the size of the subject increases and body weight rises, the coverage percentage of the meniscus is reduced, suggesting that there would be an increase in the load-bearing by the cartilage. However, this reduced coverage percentage is compensated by the proportionally wider and longer meniscal horn.     

Role of Articular Disc in Condylar Regeneration of the Mandible

The articular disc in the temporomandibular joint plays an important role in mandibular growth. Functional appliances induce regeneration of the condyle even after condylectomy. The aim of this study was to examine the role of the articular disc in regeneration of the condyle after unilateral condylectomy with use of a functional appliance in growing rats. Fifty growing rats were subjected to unilateral condylectomy and then half of them underwent discectomy. The functional appliance was applied to half of the rats in each group to induce regeneration of the condyle. Four and eight weeks later, morphometric and histologic analyses of the mandible were performed. Regeneration of the condyle was demonstrated in the two condylectomy groups. In the condylectomy+appliance group, the shape and cartilage of the condyle were equivalent to a normal condyle. However, regeneration of the condyle was not observed in the two discectomy groups even with the use of the functional appliance. The articular disc appears to be crucial in the regeneration of a damaged condyle, suggesting that defects or damage to the articular disc may influence mandibular growth and regeneration or repair of the condyle.     

Sexual dimorphism in striped dolphin (Stenella coeruleoalba) crania from South Africa

This study assessed the extent of sexual dimorphism in striped dolphin (Stenella coeruleoalba) cranial size and shape off the South African coast. Dorsal and ventral features of 60 striped dolphin crania from both the western and eastern coasts of South Africa were analyzed using landmark‐based geometric morphometrics. Although there was no evidence of dimorphism in cranial size, evidence for small, but significant, variation in both dorsal and ventral cranial shape was found between the sexes. The observed dimorphism was partly associated with changes in shape around the temporal fossa, occipital condyle and supraoccipital bone, the nasal bone, and the paraoccipital process and basiocciptal. The temporal fossa serves as an attachment point for the temporal muscle, which functions to close the lower jaw, and the occipital area serves as the anterior insertion of the epaxial muscles, which power the upstroke of the flukes during swimming. Both the paraoccipital process and basiocciptal are associated with the functioning of the hyoid apparatus, which serves as an attachment point for muscles and ligaments involved in feeding and sound production. These findings suggest the possibility of differences in diet, foraging behavior, vocalizations, and locomotion between the sexes of this species.