Analysis of laser-induced plasmid DNA photolysis by capillary electrophoresis

Capillary electrophoresis (CE) was used to monitor the laser-induced conversion of supercoiled pKOL8UV5 plasmid DNA into nicked conformers. The plasmid samples (0.1 mg/ml) were incubated in the absence or presence of 110 μmol/l ethidium bromide (EB) and then exposed to 110 J of argon laser radiation (488 nm). The nicked, open circular conformers were separated from the supercoiled DNA by a 15% increase in retention time. Approximately 90% of the control DNA was in the supercoiled form. Laser radiation in the presence of EB caused complete conversion of the supercoiled plasmid DNA into nicked conformers. Laser-induced fluorescence CE (LIF-CE) was about 100-fold more sensitive than UV-CE in the detection of these conformers. Agarose gel electrophoresis confirmed these findings and showed the presence of the nicked plasmid conformers. Based on these comparisons, CE is an efficient analytical tool for the identification of laser-induced conformational changes in plasmid DNA.     

Capillary electrophoresis with laser-induced fluorescence detection for fast and reliable apolipoprotein E genotyping

The use of capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection for the rapid determination of apolipoprotein E (apoE) genotypes was studied. High resolution and sensitive detection of the concerned DNA restriction fragments was achieved using CE buffers with hydroxypropylmethylcellulose (HPMC) as sieving polymer and ethidium bromide (EB) as fluorescent intercalating agent. In order to achieve adequate resolutions in short analysis times, parameters such as concentration of HPMC and EB, separation voltage, and length and coating of the capillary were evaluated. Using a separation buffer with 0.8% (w/w) HPMC and 7 microM EB, characteristic DNA-fragment profiles could be obtained for all common apoE genotypes at an overall rate of ten samples per hour. The method allows direct injection of untreated PCR samples and the use of standard fused-silica capillaries which are effectively coated following a short, one-step rinse procedure. With a simple computerized algorithm based on migration-time ratios for pattern assignment, highly reliable apoE genotyping was achieved. Overall, in terms of speed, ease of use and objectivity the presented method provides a significant improvement over previously reported CE-based procedures for apoE genotyping.     

Large-volume sample stacking-capillary electrophoresis used for the determination of 3-nitrotyrosine in rat urine

Large-volume sample stacking using the electroosmotic flow (EOF) pump technique has been investigated for the quantification of 3-nitrotyrosine in urine of diabetic rats. The best separation conditions for these highly complex samples were obtained using capillary electrophoresis (CE) in the reversed polarity mode (i.e., injecting at the cathode and detecting at the anode) using cetyltrimethylammonium bromide (CTAB) in the running buffer. The optimum CE separation conditions were achieved using a phosphate buffer prepared with 0.15M phosphoric acid and 0.5 mM CTAB adjusted to pH 6.4 with sodium hydroxide. In such CE conditions, the limit of detection (LOD) was 1.77 microM for 3-nitrotyrosine with normal injection mode, meanwhile with the large-volume sample stacking technique a more than 20-fold improvement was observed (i.e., LOD = 0.08 microM was obtained) without noticeable loss of resolution. This value allowed the detection of 3-nitrotyrosine in urine from diabetic rats. To our knowledge, this work is one of the few applications showing the great possibilities of these stacking procedures to analyse biological samples by CE.     

Simultaneous electroelution and concentration of DNA fragments from agarose gels

A rapid and inexpensive method for the electroelution of DNA fragments from agarose gels is described. DNA fragments were separated by agarose gel electrophoresis and visualized by staining with ethidium bromide. Selected DNA fragments were placed into electroeluter tubes capped with dialysis membrane and electroeluted into a small volume of buffer using a conventional horizontal gel electrophoresis apparatus. The method successfully eluted and concentrated DNA fragments with molecular weights ranging from 2.7 to 13.9 MDa in 3 h.     

Minimizing the time required for DNA amplification by efficient heat transfer to small samples

Hot-air temperature cycling of 1- to 10-microliters samples in glass capillary tubes can amplify DNA by the polymerase chain reaction in 15 min or less. A rapid temperature cycler of low thermal mass was constructed to change sample temperatures among denaturation, annealing, and elongation segments in a few seconds. After 30 cycles of 30 s each, a 536-bp beta-globin fragment of human genomic DNA was easily visualized with ethidium bromide on agarose gels. With rapid cycling, amplification yield depended on polymerase concentration. The time required for DNA amplification can be markedly reduced from prevailing protocols if appropriate equipment and sample containers are used for rapid heat transfer to the sample.     

Tag/hybridization-based sensitive detection of polymerase chain reaction products

The polymerase chain reaction (PCR) is an important technology to amplify a single copy or a few copies of DNA segment in genomic DNAs, visualizing the segment as DNA fragment. Thus, PCR is frequently used in various examinations such as detection of bacteria and fungi in the food industry. Here, we report a simple and sensitive method for detection of PCR products using single-strand tag sequence and hybridization of the tag sequence to the complementary tag sequence immobilized on solid material (STH). The detection sensitivity was found to be at least 50 times higher than electrophoresis/ethidium bromide (EtBr) visualization for approximately a 500-bp fragment and higher than the ordinary hybridization, that is, hybridization of denatured PCR product to probe sequence immobilized on solid material.     

Modification of gel architecture and TBE/TAE buffer composition to minimize heating during agarose gel electrophoresis

Agarose gel electrophoresis of DNA and RNA is routinely performed using buffers containing either Tris, acetate, and EDTA (TAE) or Tris, borate, and EDTA (TBE). Gels are run at a low, constant voltage (∼10 V/cm) to minimize current and asymmetric heating effects, which can induce band artifacts and poor resolution. In this study, alterations of gel structure and conductive media composition were analyzed to identify factors causing higher electrical currents during horizontal slab gel electrophoresis. Current was reduced when thinner gels and smaller chamber buffer volumes were used, but was not influenced by agarose concentration or the presence of ethidium bromide. Current was strongly dependent on the amount and type of EDTA used and on the concentrations of the major acid–base components of each buffer. Interestingly, resolution and the mobilities of circular versus linear plasmid DNAs were also affected by the chemical form and amount of EDTA. With appropriate modifications to gel structure and buffer constituents, electrophoresis could be performed at high voltages (20–25 V/cm), reducing run times by up to 3-fold. The most striking improvements were observed with small DNAs and RNAs (10–100 bp): high voltages and short run times produced sharper bands and higher resolution.     

Detection of Pseudomonas aeruginosa from clinical and environmental samples by amplification of the exotoxin A gene using PCR.

PCR was used to detect Pseudomonas aeruginosa from water samples by amplifying a 396-bp region of the exotoxin A (ETA) structural gene sequence. The identify of the amplified 396-bp fragment was confirmed by digesting it with PvuI restriction endonuclease, which produced the predicted 246- and 150-bp fragments. Specific primers amplified ETA-positive P. aeruginosa DNA, whereas other species of Pseudomonas and GC-rich bacteria did not yield any 396-bp fragment. The specificity and sensitivity of the assay were 100 and 96%, respectively, which confirms the assay's reliability for diagnostic and epidemiological studies. The assay can detect as few as 5 to 10 cells in a 10-ml water sample or 0.1 pg of P. aeruginosa DNA per reaction mixture (5 microliters) by ethidium bromide staining of an agarose gel. Ten-times-lower concentrations were detected by hybridization with a digoxigenin-labeled oligonucleotide probe internal to the PCR product. With this PCR method, ETA-positive P. aeruginosa was detected in animal cage water samples at a level of 40 cells per ml. This method is rapid and less cumbersome than other diagnostic methods for the identification of P. aeruginosa strains. The method described can be used to detect a low level of P. aeruginosa from environmental and clinical samples without the use of selective media or additional biochemical tests.     

Large-volume sample stacking of selected drugs of forensic significance by capillary electrophoresis

Large-volume sample stacking capillary electrophoresis (LVSS-CE) and conventional capillary electrophoresis (CE) are compared for the separation of drugs of significance to forensic and clinical analyses. LVSS-CE for cations requires the use of an electroosmotic flow (EOF) modifier in conjunction with polarity switching to effect on-column concentration of an analyte and its subsequent migration in the capillary. The run buffer consists of 0.05 mol dm⁻³ disodium tetraborate adjusted to pH 2.2 with orthophosphoric acid, and the EOF modifier is 0.002 mol dm⁻³ cetyltrimethylammonium bromide. CE investigations used an identical run buffer minus the EOF modifier. LVSS-CE and CE investigations used injection times of 30 s and 3 s, respectively. Both modes of capillary electrophoresis are compared in terms of their limits of detection, efficiency, resolution and reproducibility. LVSS-CE is also applied to the analysis of a spiked urine sample.     

Supercondensed structure of plasmid pBR322 DNA in an Escherichia coli DNA topoisomerase II mutant

An unusual structural component, supercondensed pBR322 DNA, has been found in plasmid pBR322 DNA samples isolated from a DNA topoisomerase II mutant of Escherichia coli, SD108 (topA+, gyrB225). The supercondensed pBR322 DNA moved faster than supercoiled pBR322 DNA as a homogeneous band in agrose gels when the DNA samples were analysed by electrophoresis. The mobility of the supercondensed DNA was not substantially affected by chloroquine intercalation. The supercondensed pBR322 DNA migrated as a high density "third DNA band" when the samples were subjected to caesium chloride/ethidium bromide gradient equilibrium centrifugation. The unusual pBR322 DNA visualized by electron microscopy was a globoid-shaped particle. These observations suggest that the pBR322 plasmid can assume a tertiary structure other than a supercoiled or relaxed structure. DNA topoisomerases may be involved in the supercondensation of plasmid DNA and chromosomal DNA.     

Improved electrophoretic separation of supercoiled and relaxed DNA in the presence of ethidium bromide.

Supercoiled and relaxed DNA were resolved electrophoretically in the presence of 0.5 micrograms/ml ethidium bromide. Under these conditions the Gaussian distributions of topological isomers of both supercoiled and relaxed DNA migrated as discrete bands. The separation of these DNAs was optimized by varying the concentration of electrode buffer. Electrophoresis in the presence of 160 mM Tris-acetate, pH 8.3, 4 mM EDTA resulted in a 20-fold increase in the separation of relaxed and supercoiled DNA relative to electrophoresis in 40 mM Tris-acetate, pH 8.3, 1 mM EDTA.     

Interaction of 2-chloro-N10-substituted phenoxazine with DNA and effect on DNA melting

Five N10-substituted phenoxazines having different R groups and -Cl substitution at C-2 were found to bind to calf -thymus DNA and plasmid DNA with high affinity as seen from by UV and CD spectroscopy. The effect of phenoxazines on DNA were studied using DNA-ethidium bromide complexes. Upon addition of phenoxazines, the ethidium bromide dissociated from the complex with DNA. The binding of phenoxazines to plasmid PUC18 reduced ethidium bromide binding as seen from the agarose gel electrophoresis. Butyl, and propyl substituted phenoxazines were able to release more ethidium bromide compared with that of acetyl substitution. Addition of phenoxazines also enhanced melting temperature of DNA.     

Restriction enzyme analysis of mitochondrial DNA of Acanthamoeba strains in Japan

Eight isolates, identified as either Acanthamoeba castellanii or A. polyphaga from human eye infections, contact lens containers, and soil in Japan, were characterized by restriction fragment length polymorphisms (RFLP) of mitochondrial DNA (mtDNA). Mitochondrial DNA was digested with either Bgl II, EcoR I, Hind III, Hpa I, Sca I or Xba I, electrophoresed in agarose gels, and stained with ethidium bromide. Four distinct RFLP phenotypes that refer to the collection of six fragment size patterns obtained for a single strain with six enzymes, were discovered among the eight strains used in this study. Three strains morphologically classified as A. polyphaga share a single RFLP phenotype with the Ma strain of A. castellanii. The interspecific sequence differences of 7.06-12.74% in DNA nucleotide were estimated from the proportion of DNA fragments shared by each pair of mtDNA.     

Restriction Enzyme Analysis of Mitochondrial DNA of Acanthamoeba Strains in Japan

ABSTRACT. Eight isolates, identified as either Acanthamoeba castellanii or A. polyphaga from human eye infections, contact lens containers, and soil in Japan, were characterized by restriction fragment length polymorphisms (RFLP) of mitochondrial DNA (mtDNA). Mitochondrial DNA was digested with either Bgl II, Eco R I, Hind III, Hpa I, Sca I or Xba I, electrophoresed in agarose gels, and stained with ethidium bromide. Four distinct RFLP phenotypes that refer to the collection of six fragment size patterns obtained for a single strain with six enzymes, were discovered among the eight strains used in this study. Three strains morphologically classified as A. polyphaga share a single RFLP phenotype with the Ma strain of A. castellanii. The interspecific sequence differences of 7.06–12.74% in DNA nucleotide were estimated from the proportion of DNA fragments shared by each pair of mtDNA.     

Identification of the Hind III polymorphic site in the PAI-1 gene: analysis of the PAI-1 Hind III polymorphism by PCR

The identification of the Hind III polymorphic site in the 3' end of the plasminogen activator inhibitor 1 (PAI-1) gene and a simple method to identify the Hind III polymorphism rapidly in the PAI-1 gene using PCR is described. The Hind III restriction site was identified by restriction site mapping and sequence analysis from a cosmid DNA clone. Genomic DNA was isolated from individual human umbilical cords and a 754-bp fragment of the human PAI-1 gene was amplified by PCR. Aliquots of the PCR products were digested with Hind III and analyzed by agarose gel electrophoresis. The presence of two fragments, 754 and 567 bp, was identified, and they were designated as 1/1 (750-bp band), 1/2 (754- and 567-bp bands), and 2/2 (567-bp band). The PCR method is considerably less time consuming than the conventional DNA genotyping using Southern blot analysis. To ensure that this new method identified the same PAI-1 genotypes as previously identified by Hind III restriction fragment length polymorphism (RFLP), samples were simultaneously genotyped by PCR and Southern blot analysis. Both methods identified the same Hind III genotypes in all the samples, confirming the reliability of this new PCR method for the rapid identification of the Hind III polymorphism in the human PAI-1 gene.     

Interaction of 2‐Chloro‐N10‐Substituted Phenoxazine with DNA and Effect on DNA Melting

Five N¹⁰‐substituted phenoxazines having different R groups and –Cl substitution at C‐2 were found to bind to calf –thymus DNA and plasmid DNA with high affinity as seen from by UV and CD spectroscopy. The effect of phenoxazines on DNA were studied using DNA‐ethidium bromide complexes. Upon addition of phenoxazines, the ethidium bromide dissociated from the complex with DNA. The binding of phenoxazines to plasmid _PUC18 reduced ethidium bromide binding as seen from the agarose gel electrophoresis. Butyl, and propyl substituted phenoxazines were able to release more ethidium bromide compared with that of acetyl substitution. Addition of phenoxazines also enhanced melting temperature of DNA.     

Comparison of ethidium bromide and 4′,6-diamidino-2-phenylindole as quantitative fluorescent stains for DNA in agarose gels

Two methods of quantitative, fluorescent detection of DNA bands in agarose gels separated by electrophoresis were evaluated for sensitivity and linearity of response. Comparisons of ethidium bromide staining with a method using 4′,6-diamidino-2-phenylindole (DAPI) developed in this work showed that DAPI is several times more sensitive than ethidium bromide in conditions of comparable background flourescence. Optimum flourescent staining and detection conditions for DNA bands in agarose gels using DAPI are desctribed, and advantages of this method over other fluorescent detection methods are discussed.     

Dependence of mammalian DNA replication on DNA supercoiling. I. Effects of ethidium bromide on DNA synthesis in permeable Chinese hamster ovary cells.

Chinese hamster ovary cells labelled with [14C]thymidine were made permeable, incubated with various concentrations of the intercalating dye ethidium bromide, and centrifuged through neutral sucrose gradients. The gradient profiles of these cells were qualitatively similar to those obtained by centrifuging DNA from untreated, lysed permeable cells through gradients containing ethidium bromide. The sedimentation distance of DNA had a biphasic dependence on the concentration of ethidium bromide, suggesting that the dye altered the amount of DNA supercoiling in situ. The effect of ethidium bromide intercalation on incorporation of [3H]dTMP into acid-precipitable material in an in vitro DNA synthesis mixture was measured. The incorporation of [3H]dTMP was unaffected by less than 1 microgram/ml of ethidium bromide, enhanced up to two-fold by 1--10 microgram/ml, and inhibited by concentrations greater than 10 micrograms/ml. Alkaline sucrose gradient analysis revealed a higher percentage of small DNA fragments (6--20 S) in the cells treated with 2 micrograms/ml ethidium bromide than in control cells. These fragments attained parental size within the same time as the fragments in control cells. In cells treated with 2 micrograms/ml ethidium bromide, a significant fraction of newly synthesized DNA resulted from new starts, whereas in untreated cells practically none of the newly synthesized DNA resulted from new starts. These results suggest that relaxation of DNA supercoiled structures ahead of the replication fork generates spurious initiations of DNA synthesis and that in intact cells the rate of chain elongation is limited by supercoiled regions ahead of the growing point.     

Enhanced resolution of random amplified polymorphic DNA genotyping of Pseudomonas aeruginosa

AIMS: To develop a rapid, sensitive and reproducible screening test for the detection of nosocomial spreading of Pseudomonas aeruginosa. METHODS AND RESULTS: Ps. aeruginosa genomic DNA extraction, RAPD-PCR, electrophoresis on acrylamide gel and silver staining were performed by using standardized reagents and conditions. The results were compared with the agarose gel electrophoresis followed by ethidium bromide staining. CONCLUSIONS: The coupling of acrylamide gel electrophoresis and silver staining gave about 80% more DNA bands than the traditional method, allowing a finer discrimination among different Ps. aeruginosa strains. SIGNIFICANCE AND IMPACT OF THE STUDY: By enhancing the resolution of the electrophoretic separation and the sensitivity of the staining, random amplification could be easily applied to the surveillance and prevention of nosocomial infections by clinical microbiology laboratories.     

Optimized sample preparation for tandem capillary electrophoresis single-stranded conformational polymorphism/ heteroduplex analysis

Here we describe DNA sample preparation methods that allow the rapid, simultaneous generation of both single-stranded conformational polymorphism (SSCP) and heteroduplex DNA elements from a single sample in a single tube, which are suitable for direct injection into a capillary electrophoresis (CE) instrument with excellent sensitivity of genetic mutation detection. The p53 gene was used as a model DNA region for this study, which was performed on a high-throughput MegaBACE 96-capillary array electrophoresis instrument. We found that, contrary to the practice common in slab-gel SSCP analysis, denaturants such as formamide are incompatible with this novel technique because they result in homo- and heteroduplex peak broadening in CE (possibly as a result of incomplete dsDNA re-hybridization) that reduces the peak resolution and hence the sensitivity of mutation detection. We also have found that PCR buffers, which are typically used to suspend samples for slab-gel heteroduplex analysis (HA), but which are less suitable for CE because of the presence of extra salt that reduces the efficiency of electrokinetic injection, may be substituted with a 10 mM Tris-HCI buffer (pH 8.5). The use of this Tris-HCl buffer for sample preparation provides both a high sensitivity of mutation detection by tandem SSCP/HA and high efficiency ofelectrokinetic injection by CE. In a related study (published elsewhere), we have applied this optimized protocol to the screening of a set of 32 mutant DNA samples from p53 exons 7 and 8 and recorded 100% sensitivity of mutation detection for tandem CE-SSCP/HA, whereas each individual method yielded lower sensitivity on its own (93% for SSCP and 75% for HA).