In vitro hyperprocessing of Drosophila tRNAs by the catalytic RNA of RNase P the cloverleaf structure of tRNA is not always stable?

We have previously reported that the catalytic RNA subunit of RNase P of Escherichia coli (M1 RNA) cleaves Drosophila initiator methionine tRNA (tRNA(Met)i) within the mature tRNA sequence to produce specific fragments. This cleavage was dependent on the occurrence of an altered conformation of the tRNA substrate. We call this further cleavage hyperprocessing. In the present paper, to search for another tRNA that can be hyperprocessed in vitro, we used total mature tRNAs from Drosophila as substrates for the in vitro M1 RNA reaction. We found that some tRNAs can be hyperprocessed by M1 RNA and that two such tRNAs are an alanine tRNA and a histidine tRNA. Using mutant substrates of these tRNAs, we also show that the hyperprocessing by M1 RNA is dependent on the occurrence of altered conformations of these tRNAs. The altered conformations were very similar to that of tRNA(Met)i. We show here that M1 RNA can be used as a powerful tool to detect the alternative conformation of tRNAs. The relationship between these hyperprocessing reactions and stability of the tRNA structure will also be discussed.     

Human tyrosine tRNA is also internally cleavable by E. coli ribonuclease P RNA ribozyme in vitro

Transfer RNA is an essential molecule for biological system, and each tRNA molecule commonly has a cloverleaf structure. Previously, we experimentally showed that some Drosophila tRNA (tRNA(Ala), tRNA(His), and tRNA(iMet)) molecules fit to form another, non-cloverleaf, structure in which the 3'-half of the tRNA molecules forms an alternative hairpin, and that the tRNA molecules are internally cleaved by the catalytic RNA of bacterial ribonuclease P (RNase P). Until now, the hyperprocessing reaction of tRNA has only been reported with Drosophila tRNAs. This time, we applied the hyperprocessing reaction to one of human tRNAs, human tyrosine tRNA, and we showed that this tRNA was also hyperprocessed by E. coli RNase P RNA. This tRNA is the first example for hyperprocessed non-Drosophila tRNAs. The results suggest that the hyperprocessing reaction can be a useful tool detect destablized tRNA molecules from any species.     

Protection from chemical modification of nucleotides in complexes of M1 RNA, the catalytic subunit of RNase P from E coli, and tRNA precursors.

Certain nucleotides in M1 RNA, the catalytic RNA subunit of RNase P from E coli, are protected from chemical modification when M1 RNA forms complexes with tRNA precursor molecules (ES complexes). Many of these nucleotides are important in the formation of the Michaelis complex. In the presence of tRNA precursor molecules, the pattern of protection from chemical modification of a region in M1 RNA that resembles the E site in 23S rRNA is similar to the pattern of protection of the E site in the presence of deacylated tRNA. In the complex with the RNA enzyme, more nucleotides in the substrate become accessible to modification, an indication that the substrate is in an unfolded conformation under these conditions.     

Human Tyrosine tRNA Is Also Internally Cleavable by E. coli Ribonuclease P RNA Ribozyme in Vitro

Transfer RNA is an essential molecule for biological system, and each tRNA molecule commonly has a cloverleaf structure. Previously, we experimentally showed that some Drosophila tRNA (tRNA^Ala, tRNA^His, and tRNA_i ^Met) molecules fit to form another, non-cloverleaf, structure in which the 3'-half of the tRNA molecules forms an alternative hairpin, and that the tRNA molecules are internally cleaved by the catalytic RNA of bacterial ribonuclease P (RNase P). Until now, the hyperprocessing reaction of tRNA has only been reported with Drosophila tRNAs. This time, we applied the hyperprocessing reaction to one of human tRNAs, human tyrosine tRNA, and we showed that this tRNA was also hyperprocessed by E. coli RNase P RNA. This tRNA is the first example for hyperprocessed non-Drosophila tRNAs. The results suggest that the hyperprocessing reaction can be a useful tool to detect destablized tRNA molecules from any species.     

Evolution of the secondary structures and compensatory mutations of the ribosomal RNAs of Drosophila melanogaster

This paper examines the effects of DNA sequence evolution on RNA secondary structures and compensatory mutations. Models of the secondary structures of Drosophila melanogaster 18S ribosomal RNA (rRNA) and of the complex between 2S, 5.8S, and 28S rRNAs have been drawn on the basis of comparative and energetic criteria. The overall AU richness of the D. melanogaster rRNAs allows the resolution of some ambiguities in the structures of both large rRNAs. Comparison of the sequence of expansion segment V2 in D. melanogaster 18S rRNA with the same region in three other Drosophila species and the tsetse fly (Glossina morsitans morsitans) allows us to distinguish between two models for the secondary structure of this region. The secondary structures of the expansion segments of D. melanogaster 28S rRNA conform to a general pattern for all eukaryotes, despite having highly divergent sequences between D. melanogaster and vertebrates. The 70 novel compensatory mutations identified in the 28S rRNA show a strong (70%) bias toward A-U base pairs, suggesting that a process of biased mutation and/or biased fixation of A and T point mutations or AT-rich slippage-generated motifs has occurred during the evolution of D. melanogaster rDNA. This process has not occurred throughout the D. melanogaster genome. The processes by which compensatory pairs of mutations are generated and spread are discussed, and a model is suggested by which a second mutation is more likely to occur in a unit with a first mutation as such a unit begins to spread through the family and concomitantly through the population. Alternatively, mechanisms of proofreading in stem-loop structures at the DNA level, or between RNA and DNA, might be involved. The apparent tolerance of noncompensatory mutations in some stems which are otherwise strongly supported by comparative criteria within D. melanogaster 28S rRNA must be borne in mind when compensatory mutations are used as a criterion in secondary-structure modeling. Noncompensatory mutation may extend to the production of unstable structures where a stem is stabilized by RNA- protein or additional RNA-RNA interactions in the mature ribosome. Of motifs suggested to be involved in rRNA processing, one (CGAAAG) is strongly overrepresented in the 28S rRNA sequence. The data are discussed both in the context of the forces involved with the evolution of multigene families and in the context of molecular coevolution in the rDNA family in particular.      

Kinetics of hyperprocessing reaction of human tyrosine tRNA by ribonuclease P ribozyme from Escherichia coli

Human tyrosine tRNA and fly alanine, histidine, and initiator methionine tRNAs are generally cleavable internally by bacterial ribonuclease P ribozyme. The unusual internal cleavage reaction of tRNA, called hyperprocessing, occurs when the cloverleaf structure of the tRNA molecule is denatured to form a double-hair-pin-like structure. The hyperprocessing reaction of these tRNAs requires magnesium ions. We analyzed details of this reaction using human tyrosine tRNA and Escherichia coli RNase P ribozyme. The usual processing reaction occurred efficiently with magnesium at 5 mM, but for the hyperprpocessing reaction, higher concentrations were needed. With such high concentrations, hyperprocessing cleaved both mature tRNA and tRNA precursor as substrates. When mature tRNA was the substrate, the apparent K(M) was almost the same as in the usual reaction, but k(cat) was smaller. These results indicated that the occurrence of hyperprocessing depends on the magnesium ion concentration, and suggested that magnesium ions contribute to the recognition of the shape of the substrate by bacterial RNase P enzymes.     

The structure of a single unit of ribosomal RNA gene (rDNA) including intergenic subrepeats in the Australian bulldog ant Myrmecia croslandi (Hymenoptera: Formicidae)

A complete single unit of a ribosomal RNA gene (rDNA) of M. croslandi was sequenced. The ends of the 18S, 5.8S and 28S rRNA genes were determined by using the sequences of D. melanogaster rDNAs as references. Each of the tandemly repeated rDNA units consists of coding and non-coding regions whose arrangement is the same as that of D. melanogaster rDNA. The intergenic spacer (IGS) contains, as in other species, a region with subrepeats, of which the sequences are different from those previously reported in other insect species. The length of IGSs was estimated to be 7-12 kb by genomic Southern hybridization, showing that an rDNA repeating unit of M. croslandi is 14-19 kb-long. The sequences of the coding regions are highly conserved, whereas IGS and ITS (internal transcribed spacer) sequences are not. We obtained clones with insertions of various sizes of R2 elements, the target sequence of which was found in the 28S rRNA coding region. A short segment in the IGS that follows the 3' end of the 28S rRNA gene was predicted to form a secondary structure with long stems.     

Escherichia coli 16S rRNA 3''-end formation requires a distal transfer RNA sequence at a proper distance.

The 16S rRNA species in bacterial precursor rRNAs is followed by two evolutionarily conserved features: (i) a double-stranded stem formed by complementary sequences adjacent to the 5' and 3' ends of the 16S rRNA; and (ii) a 3'-transfer RNA sequence. To assess the possible role of these features, plasmid constructs with precursor-specific features deleted were tested for their capacity to form mature rRNA. Stem-forming sequences were dispensable for both 5' and 3' terminus formation; whereas an intact spacer tRNA positioned greater than 24 nucleotides downstream of the 16S RNA sequence was required for correct 3'-end maturation. These results suggest that spacer tRNA at an appropriate location helps form a conformation obligate for pre-rRNA processing, perhaps by binding to a nascent binding site in preribosomes. Thus, spacer tRNAs may be an obligate participant in ribosome formation.     

Similarities between a predicted secondary structure for the M1 RNA ribozyme and the tRNA binding center of 16 S rRNA from E. coli

We propose a new model for the secondary structure of the M1 RNA component of E. coli RNase P which is based on significant sequence homologies with parts of the E. coli 16 S rRNA. A large domain of the new model resembles closely the secondary structure of the tRNA binding center of 16 S rRNA. We suggest that this domain of M1 RNA when functioning as a ribozyme binds the mature part of the precursor tRNA.     

Independent binding sites in mouse 5.8S ribosomal ribonucleic acid for 28S ribosomal ribonucleic acid

Limited digestion of mouse 5.8S ribosomal RNA (rRNA) with RNase T2 generates 5'- and 3'-terminal "half-molecules". These fragments are capable of independently and specifically binding to 28S rRNA, so there exist at least two contacts in the 5.8S rRNA for the 28S rRNA. The dissociation constants for the 5.8S/28S, 5' 5.8S fragment/28S, and 3' 5.8S fragment/28S complexes are 9 x 10(-8) M, 6 x 10(-8) M, and 13 x 10(-8) M, respectively. Thus, each of the fragment binding sites contributes about equally to the overall binding energy of the 5.8S/28S rRNA complex, and the binding sites act independently, rather than cooperatively. The dissociation constants suggest that the 5.8S rRNA termini from short, irregular helices with 28S rRNA. Thermal denaturation data on complexes containing 28S rRNA and each of the half-molecules of 5.8S rRNA indicate that the 5'-terminal binding site(s) exist(s) in a single conformation while the 3'-terminal site exhibits two conformational alternatives. The functional significance of the different conformational states is presently indeterminate, but the possibility they may represent alternative forms of a conformational switch operative during ribosome function is discussed.     

Human glutamate tRNA forms stable hybrids in vitro with 28S ribosomal RNA.

A human glutamate tRNA has been shown to form stable hybrids with 28S ribosomal RNA. This tRNA was purified from HeLa cell cytoplasmic RNA by RNA-RNA solution hybridization followed by the isolation of tRNA-28S rRNA complexes by hybridization-selection with ribosomal DNA or by recovery of the 28S peak from formamide-sucrose gradients. The single hybridizing tRNA species was identified as tRNAGluCUC by sequencing: pU-C-C-C-U-G-G-U-G-m2G-U-C-phi-A-G-U-G-G-D-phi-A-G-G-A-U-U- C-G-G-C-G-C-U-C-U-C-A-C-C-G-C-G-G-C-m5C-m5C-G-G-G-Tm-phi-C-G-A- U-U-C-C-C-G-G-U-C-A-G-G-G-A-A-C-C-AOH. Computer analysis located a nucleotide sequence near the middle of human 28S rRNA which is complementary to 15-26 nucleotides between residues 20 and 50 of this tRNA. An interaction between this tRNA and 28S rRNA suggests that tRNAGluCUC may have functions in the cell in addition to translation.     

A cloned Drosophila DNA fragment which codes for a 4 S RNA species.

A collection of random Drosophila melanogaster DNA fragments cloned individually in Escherichia coli was screened for the presence of sequences complementary to the 4 S, 5 S and 5.8 S RNA species produced in the D. melanogaster Kc tissue culture line. Four D. melanogaster DNA fragments were found which possessed sequences complementary to the 4 S RNA species but not complementary to the 5 S or 5.8 S RNA. One such cloned fragment (6.81 kilobase in length) was characterized further. It hybridizes in situ to region 22A-C of the left arm of chromosome 2 and does not contain repetitive sequences detectable by renaturation (cot) analysis. This same region was reported earlier by Steffensen and Wimber (Genetics (1971) 69, 163--178) to hybridize in situ to bulk tRNA extracted from D. melanogaster.