PCR-based gene synthesis to produce recombinant proteins for crystallization

Background  

Gene synthesis technologies are an important tool for structural biology projects, allowing increased protein expression through codon optimization and facilitating sequence alterations. Existing methods, however, can be complex and not always reproducible, prompting researchers to use commercial suppliers rather than synthesize genes themselves.     

A simple,universal, efficient PCR-based gene synthesis method: Sequential OE-PCR gene synthesis

Herein we present a simple, universal, efficient gene synthesis method based on sequential overlap extension polymerase chain reactions (OE-PCRs). This method involves four key steps: (i) the design of paired complementary 54-mer oligonucleotides with 18 bp overlaps, (ii) the utilisation of sequential OE-PCR to synthesise full-length genes, (iii) the cloning and sequencing of four positive T-clones of the synthesised genes and (iv) the resynthesis of target genes by OE-PCR with correct templates. Mispriming and secondary structure were found to be the principal obstacles preventing successful gene synthesis and were easily identified and solved in this method. Compensating for the disadvantages of being laborious and time-consuming, this method has many attractive advantages, such as the ability to guarantee successful gene synthesis in most cases and good allowance for Taq polymerase, oligonucleotides, PCR conditions and a high error rate. Thus, this method provides an alternative tool for individual gene synthesis without strict needs of the high-specialised experience.     

A one-step approach to the synthesis of germanicane triterpenoids from allobetulin

A new triterpenoid of the germanicane series 3S,19R-diacetoxy-17-iodomethylenoleanane has been synthesized by treating allobetulin with acetyl chloride and sodium iodide in acetonitrile. The structure of the compound obtained has been corroborated by X-ray analysis data.     

A PCR-based approach to sequence the Candida tropicalis HSP90 gene

The heat shock protein 90 (hsp90) gene sequence is known to be highly conserved across the species barrier. A PCR-based method was thus utilised in an attempt to sequence the Candida tropicalis hsp90 gene. Primers for PCR were designed from conserved regions of the gene, which were identified by comparing the Saccharomyces cerevisiae and Candida albicans hsp90 gene sequences. Different sets of primers were designed to amplify and obtain overlapping DNA sequences of the C tropicalis gene. PCR was carried out on genomic DNA of Candidca tropicalis and the PCR products were cloned into suitable vector molecules for sequencing. In this way, a 2,070-basepair sequence of the C. tropicalis hsp90 gene was obtained. The PCR-based approach proved to be an easier method of obtain the sequence of a highly conserved gene, as compared to more conventional methods.     

Directed termination PCR: a one-step approach to mutation detection.

We describe a novel PCR-based method that allows the generation of nested termination fragments by integrating both selective DNA amplification and directed chain termination into a single PCR reaction. These termination fragments can be examined for sequence variation in either denaturing or non-denaturing polyacrylamide gels. This method provides a one-step and highly effective approach for the detection of both insertions/deletions and single base pair substitutions in sequences up to 1 kb in length.     

PCR-based gene synthesis as an efficient approach for expression of the A+T-rich malaria genome

The A+T-rich genome of the human malaria parasite Plasmodium falciparum encodes genes of biological importance that cannot be expressed efficiently in heterologous eukaryotic systems, owing to an extremely biased codon usage and the presence of numerous cryptic polyadenylation sites. In this work we have optimized an assembly polymerase chain reaction (PCR) method for the fast and extremely accurate synthesis of a 2.1 kb Plasmodium falciparum gene (pfsub-1) encoding a subtilisin-like protease. A total of 104 oligonucleotides, designed with the aid of dedicated computer software, were assembled in a single-step PCR. The assembly was then further amplified by PCR to produce a synthetic gene which has been cloned and successfully expressed in both Pichia pastoris and recombinant baculovirus-infected High Five(TM) cells. We believe this strategy to be of special interest as it is simple, accessible and has no limitation with respect to the size of the gene to be synthesized. Used as a systematic approach for the malarial genome or any other A + T-rich organism, the method allows the rapid synthesis of a nucleotide sequence optimized for expression in the system of choice and production of sufficiently large amounts of biological material for complete molecular and structural characterization.     

DNAWorks: an automated method for designing oligonucleotides for PCR-based gene synthesis

The availability of sequences of entire genomes has dramatically increased the number of protein targets, many of which will need to be overexpressed in cells other than the original source of DNA. Gene synthesis often provides a fast and economically efficient approach. The synthetic gene can be optimized for expression and constructed for easy mutational manipulation without regard to the parent genome. Yet design and construction of synthetic genes, especially those coding for large proteins, can be a slow, difficult and confusing process. We have written a computer program that automates the design of oligonucleotides for gene synthesis. Our program requires simple input information, i.e. amino acid sequence of the target protein and melting temperature (needed for the gene assembly) of synthetic oligonucleotides. The program outputs a series of oligonucleotide sequences with codons optimized for expression in an organism of choice. Those oligonucleotides are characterized by highly homogeneous melting temperatures and a minimized tendency for hairpin formation. With the help of this program and a two-step PCR method, we have successfully constructed numerous synthetic genes, ranging from 139 to 1042 bp. The approach presented here simplifies the production of proteins from a wide variety of organisms for genomics-based studies.     

Experimental analysis of gene assembly with TopDown one-step real-time gene synthesis

Herein we present a simple, cost-effective TopDown (TD) gene synthesis method that eliminates the interference between the polymerase chain reactions (PCR) assembly and amplification in one-step gene synthesis. The method involves two key steps: (i) design of outer primers and assembly oligonucleotide set with a melting temperature difference of >10°C and (ii) utilization of annealing temperatures to selectively control the efficiencies of oligonucleotide assembly and full-length template amplification. In addition, we have combined the proposed method with real-time PCR to analyze the step-wise efficiency and the kinetics of the gene synthesis process. Gel electrophoresis results are compared with real-time fluorescence signals to investigate the effects of oligonucleotide concentration, outer primer concentration, stringency of annealing temperature, and number of PCR cycles. Analysis of the experimental results has led to insights into the gene synthesis process. We further discuss the conditions for preventing the formation of spurious DNA products. The TD real-time gene synthesis method provides a simple and efficient method for assembling fairly long DNA sequence, and aids in optimizing gene synthesis conditions. To our knowledge, this is the first report that utilizes real-time PCR for gene synthesis.     

Improved PCR-based gene synthesis method and its application to the Citrobacter freundii phytase gene codon modification

Gene synthesis technologies provide a powerful tool for increasing protein expression through codon optimization and gene modification. Here we describe an improved PCR-based gene synthesis technology, which is accurate, simple and cheap. The improved PCR-based gene synthesis (IPS) method consists of two steps. The first one is the synthesis of 300-400 bp fragments by PCR reaction with Pfu DNA polymerase from 60-mer and 30-mer oligonucleotides with a 15 bp overlap. The second one is assembling of fragments from the first step into the full-length gene by PCR reaction. Using this approach, we have successfully synthesized a modified phytase gene with 1256 bp in length with optimal codons for expression in Pichia pastoris. P. pastoris strain that expressed the modified phytase gene (phyA-mod) showed a 50% increase in phytase activity level. In addition, we propose an inexpensive method for error correction, based on overlap-extension PCR (OE-PCR).     

Thermodynamically balanced inside-out (TBIO) PCR-based gene synthesis: a novel method of primer design for high-fidelity assembly of longer gene sequences

A novel thermodynamically-balanced inside-out (TBIO) method of primer design was developed and compared with a thermodynamically-balanced conventional (TBC) method of primer design for PCR-based gene synthesis of codon-optimized gene sequences for the human protein kinase B-2 (PKB2; 1494 bp), p70 ribosomal S6 subunit protein kinase-1 (S6K1; 1622 bp) and phosphoinositide-dependent protein kinase-1 (PDK1; 1712 bp). Each of the 60mer TBIO primers coded for identical nucleotide regions that the 60mer TBC primers covered, except that half of the TBIO primers were reverse complement sequences. In addition, the TBIO and TBC primers contained identical regions of temperature- optimized primer overlaps. The TBC method was optimized to generate sequential overlapping fragments (~0.4–0.5 kb) for each of the gene sequences, and simultaneous and sequential combinations of overlapping fragments were tested for their ability to be assembled under an array of PCR conditions. However, no fully synthesized gene sequences could be obtained by this approach. In contrast, the TBIO method generated an initial central fragment (~0.4–0.5 kb), which could be gel purified and used for further inside-out bidirectional elongation by additional increments of 0.4–0.5 kb. By using the newly developed TBIO method of PCR-based gene synthesis, error-free synthetic genes for the human protein kinases PKB2, S6K1 and PDK1 were obtained with little or no corrective mutagenesis.     

Enantiomeric determination of amphetamines: exploring a novel one-step solid-phase microextraction-based approach

The recent advances in fiber manufacturing technology, solid-phase microextraction (SPME) is now widely studied for its effectiveness for the pretreatment of various categories of samples. This study explores a novel SPME approach for enantiomeric analysis of amphetamines, in which absorption/derivatization are accomplished in one step. Specifically, (S)-(-)-N-(Trifluoroacetyl)-prolyl chloride was adopted as the chiral derivatizing reagent and added directly into the sample matrix. Analytical parameters, such as temperature, absorption/desorption duration, and the amount of derivatizing reagent, were studied to determine their effects on the yield of analytes. The derivatization products resulting from this study show excellent desorption characteristics on the polydimethylsiloxane-coated fiber adopted in this study. Optimal operational parameters (absorption: 70 degrees C for 10 min; injection: 250 degrees C for 5 min) cause minimal negative impact on the fiber, allowing repeated use of the fiber for more than 30 times. For quantitation, data were collected under selected ion monitoring (SIM) mode using m/z 237 and 251 to designate derivatized amphetamine and methamphetamine. This method was evaluated and proved to be effective in (a) quantitative determination of the enantiomeric pairs of amphetamine and methamphetamine--in terms of repeatability, linearity, and limits of detection and quantitation; and (b) generating case-specimen data comparable to those derived from a conventional Liquid-liquid extraction approach. Good linearity for the calibration curves were established in the range of 1000-50 ng/mL for both analytes. The limits of detection for these analytes were 30 ng/mL.     

Rational design and PCR-based synthesis of an artificial Schizophyllum commune xylanase gene.

A synthetic gene encoding the Schizophyllum commune xylanase XynA was constructed by a novel PCR-based procedure. Three long oligonucleotides were synthesized and used in combination with flanking PCR primers to generate a 607 base pair gene which contained 31 unique locations for restriction enzyme cleavage. The amino acid sequence was tailored for expression in Escherichia coli by using only those codons found in highly expressed E. coli genes. The availability of the gene will facilitate analysis of the structure and function of this and other beta-(1,4) xylanases.     

PhenomeNET: a whole-phenome approach to disease gene discovery

Phenotypes are investigated in model organisms to understand and reveal the molecular mechanisms underlying disease. Phenotype ontologies were developed to capture and compare phenotypes within the context of a single species. Recently, these ontologies were augmented with formal class definitions that may be utilized to integrate phenotypic data and enable the direct comparison of phenotypes between different species. We have developed a method to transform phenotype ontologies into a formal representation, combine phenotype ontologies with anatomy ontologies, and apply a measure of semantic similarity to construct the PhenomeNET cross-species phenotype network. We demonstrate that PhenomeNET can identify orthologous genes, genes involved in the same pathway and gene-disease associations through the comparison of mutant phenotypes. We provide evidence that the Adam19 and Fgf15 genes in mice are involved in the tetralogy of Fallot, and, using zebrafish phenotypes, propose the hypothesis that the mammalian homologs of Cx36.7 and Nkx2.5 lie in a pathway controlling cardiac morphogenesis and electrical conductivity which, when defective, cause the tetralogy of Fallot phenotype. Our method implements a whole-phenome approach toward disease gene discovery and can be applied to prioritize genes for rare and orphan diseases for which the molecular basis is unknown.     

Superiority of the PCR-based approach for cloning the acetate kinase gene of Clostridium thermocellum

Cloning of Clostridium thermocellum acetate kinase (ack) and/or phosphotransacetylase (pta) genes in Escherichia coli by functional complementation of ack and/or pta mutants was complicated by an alternative acetate assimilation pathway involving acetyl-CoA synthetase (ACS). In addition to the problems encountered with the complementation approach, cloning of these genes was not readily achieved using heterologous probing with corresponding genes from Escherichia coli and Methanosarcina thermophila due to the lack of sufficient homology. The use of a PCR-based approach, on the other hand, yielded a specific C. thermocellum gene fragment which showed significant sequence identity to the ack gene for which primers were designed. The subcloned ack fragment was then successfully used as a probe for the isolation of the corresponding gene and restriction analysis of that region. Received 22 January 1998/ Accepted in revised form 31 August 1998