Cloning and over-expression of an alkaline protease from Bacillus licheniformis

The alkaline protease gene, apr, from Bacillus licheniformis 2709 was cloned into a Bacillus shuttle expression vector, pHL, to yield the recombinant plasmid pHL-apr. The pHL-apr was expressed in Bacillus subtilis WB600, yielding a high expression strain BW-016. The amount of alkaline protease produced in the recombinant increased by 65% relative to the original strain. SDS-PAGE analysis indicated a Mr of 30.5 kDa. The amino acid sequence deduced from the DNA sequence analysis revealed a 98% identity to that of Bacillus licheniformis 6816.     

A continuous culture study of the bioenergetic aspects of growth and production of exocellular protease in Bacillus licheniformis

Summary Bacillus licheniformis S 1684 is able to produce an alkaline serine protease exocellularly. In glucose-limited chemostat cultures the specific rate of protease production was maximal at a -value of 0.22. Above this growth rate protease production was repressed. Dependent on 10–20% of the glucose input was used for exocellular product formation. The degree of reduction of exocellular products was 4.1.Maximum molar growth yields were high and indicate a high efficiency of growth. The values of Y _glu ^max and YO ₂ ^max were 83.8 and 53.3, respectively. When Y _glu ^max was corrected for the amount of glucose used for product formation a value of 100.3 was obtained. These high maximum molar growth yields are most probably caused by a high Y _ATP ^max . Anaerobic batch experiments showed a Y _ATP of 14.6.Sometimes the used strain was instable in cell morphology and protease production. Non-protease producing cells most probably develop from producing cells by mutation in the rel-gene. Producing cells most probably are relaxed (rel ^-) and non-producing cells stringent (rel ⁺).Glossary specific growth rate (h^-1) - Y _sub growth yield permol substrate (g biomass/mol) - Y ^max maximum molar growth yield, corrected for maintenance requirements (g biomass/mol) - Y ^max(corr) Y ^max corrected for product formation (g biomass/mol) - m _sub maintenance requirements (mol/g biomass·h) - m _sub(corr) maintenance requirements corrected for product formation (mol/g biomass·h) - Y _c fraction of organic substrate converted in biomass - z fraction of organic substrate converted in exocellular products - d fraction of organic substrate converted in CO₂ (g mol/g atom C) - Crec% carbon recovery % - average degree of reduction of exocellular products - P/O amount of ATP produced during electron-transport of 2 electrons to oxygen     

Production of 2,3-butanediol from glucose byBacillus licheniformis

Bacillus licheniformis produced 2,3-butanediol from glucose with an optimum yield of 47 g/100 g glucose after 72 h of growth on a peptone/beef extract medium containing 2% (w/v) glucose at pH 6.0 and 37°C. This yield of 2,3-butanediol was higher than those previously reported forKlebsiella oxytoca (37 g/100 g glucose) andBacillus polymyxa (24 g/100 glucose).     

Purification and characterisation of an alkaline protease used in tannery industry from Bacillus licheniformis

An extracellular alkaline protease produced by Bacillus licheniformis AP-1 was purified 76-fold, yielding a single 28 kDa band on SDS-PAGE. It was optimally active at pH 11 and at 60 degrees C (assayed over 10 min). The protease was completely inhibited by phenylmethylsulfonyl fluoride and diodopropyl fluorophosphate, with little increase upon Ca2+ and Mg2+ addition.     

Tannase production by Bacillus licheniformis

Bacillus licheniformis KBR 6 produced maximum extracellular tannase activity at 0.21 U ml^–1 with 1.5% (w/v) tannic acid either in the absence or presence of glucose (1 g l^–1) after 18–21 h growth though the organism did not attain maximum growth until 36 h.     

Extractive fermentation for enhanced production of alkaline phosphatase from Bacillus licheniformis MTCC 1483 using aqueous two-phase systems

A study was made to find out maximum partitioning of Bacillus licheniformis alkaline phosphatase in different ATPSs composed of different molecular weight of PEG X (X = 2000, 4000, 6000) with salts (magnesium sulphate, sodium sulphate, sodium citrate) and polymers (dextran 40, dextran T500). Physicochemical factors such as effect of system pH, system temperature and production media were evaluated for partitioning of alkaline phosphatase. PEG 4000 [9.0% (w/v)] and dextran T500 [9.6% (w/v)] were selected as most suitable system components for alkaline phosphatase production by B. licheniformis based on greater partition coefficient (k = 5.23). The two-phase system produced fewer enzymes than the homogeneous fermentation (control) in early stage of fermentation, but after 72 h the enzyme produced in the control system was less than that in the ATPS. Total alkaline phosphatase yield in ATPS fermentation was 3907.01 U/ml and in homogeneous fermentation 2856.50 U/ml.     

Isolation, characterization and evolution of a new thermophilic Bacillus licheniformis for lactic acid production in mineral salts medium

The high fermentation cost of lactic acid is a barrier for polylactic acid (PLA) to compete with the petrochemical derived plastics. In order to lower the cost of lactic acid, the industry needs a microorganism that can ferment various sugars at high temperature (50 °C) and at the same time using low cost mineral salts (MS) medium. One such bacterium, BL1, was isolated at 50 °C and identified as Bacillus licheniformis. BL1 can ferment glucose to optically pure l-lactate with a maximum specific productivity of 7.8 g/h l in LB medium and 0.7 g/h l in MS medium at 50 °C. BL1 can also consume 10% and 15% glucose in 20 and 48 h, respectively. After serial transfer of BL1 and BL2 in different concentrations of xylose and MS medium respectively, the final mutant BL3 could efficiently ferment glucose and xylose with specific productivity of 1.9 g/h l and 1.2 g/h l in strict MS medium.     

Purification and characterization of organic solvent stable protease from Bacillus licheniformis RSP-09-37

A protease was purified from the cell-free supernatant of Bacillus licheniformis RSP-09-37, a mutant from a thermophilic bacterial strain, B. licheniformis RSP-09, using affinity chromatography with alpha-casein agarose resin. The protease was purified 85-fold to electrophoretic homogeneity. The apparent molecular mass of purified protease was 55 kDa using gel filtration in high-performance liquid chromatography, which is in agreement with the results obtained from sodium dodecyl sulfate-polyacrylamide gel electrophoresis, suggesting a monomeric nature of the protein. The purified protease revealed temperature optima of 50 degrees C and pH optima of 10.0 and was classified as serine protease based on its complete inhibition with phenyl methyl sulfonyl fluoride. The purified protease exhibited tolerance to both detergents and organic solvent. The synthetic activity of the protease was tested using the transesterification reaction between N-acetyl-L-phenylalanine-ethyl ester and n-propanol in organic solvents varying in their log P values and the kinetic parameters of the enzyme in these organic solvents were studied. The enzyme has potential to be employed for synthetic reactions and in detergent formulations.     

Metabolic flux analyses for serine alkaline protease production

The intracellular metabolic fluxes through the central carbon pathways in Bacillus licheniformis in serine alkaline protease (SAP) production were calculated to predict the potential strategies for increasing the performance of the bacilli, by using two optimization approaches, i.e. the theoretical data-based (TDA) and the theoretical data-based capacity (TDC) analyses based on respectively minimum in-vivo SAP accumulation rate and maximum SAP synthesis rate assumptions, at low-, medium-, and high-oxygen transfer conditions. At all periods of low-oxygen transfer condition, in lag and early exponential periods of medium-oxygen transfer (MOT) condition, and SAP synthesis period of high-oxygen transfer (HOT) condition, the TDA and TDC analyses revealed that SAP overproduction capacity is almost equal to the observed SAP production due to the regulation effect of the oxygen transfer. In the growth and early SAP synthesis period and in SAP synthesis period at MOT condition the calculated results of the two analyses reveal that SAP synthesis rate of the microorganism can be increased 7.2 and 16.7 folds, respectively; whereas, in the growth and early SAP synthesis period at HOT condition it can be increased 12.6 folds. The diversions in the biochemical reaction network and the influence of the oxygen transfer on the performance of the bacilli were also presented. The results encourage the application of metabolic engineering for lifting the rate limitations and for improving the genetic regulations in order to increase the SAP production.     

一株地衣芽胞杆菌产碱性蛋白酶条件优化

【背景】碱性蛋白酶是众多芽胞杆菌的发酵产物,是工业上极其重要的一类酶。【目的】利用酪素培养基从环境样品中筛选出一株产碱性蛋白酶的菌株,对传代次数、发酵的碳源、氮源、金属离子、磷酸盐、初始pH、接种量和温度进行优化,提高其产碱性蛋白酶的能力并降低发酵成本。【方法】采用革兰氏染色法、扫描电镜、生理生化试验、16S rRNA基因序列对分离的菌株进行鉴定;采用单因素、Plackett-Burman、最陡爬坡和响应面试验优化碱性蛋白酶的发酵条件,使用Minitab对试验数据进行分析。【结果】经鉴定分离菌株为地衣芽胞杆菌,命名为Bacillus licheniformis NWMCC0046。优化后的发酵培养基组成为（g/L）:豆粕50.00,葡萄糖10.00,酵母浸膏13.46,CaCl₂ 0.50,Na₂HPO₄·12H₂O 4.00,KH₂PO₄ 0.30;优化后的培养条件为:pH 7.5,34.81℃,接种量4.13%。在此条件下,摇瓶发酵48 h时碱性蛋白酶...     

Repeated pH-stat fed-batch fermentation for rhamnolipid production with indigenous Pseudomonas aeruginosa S2

Rhamnolipid is one of the most commonly used biosurfactants with the ability to reduce the surface tension of water from 72 to 30 mN/m. An indigenous isolate Pseudomonas aeruginosa S2 possessing excellent ability to produce rhamnolipid was used as a model strain to explore fermentation technology for rhamnolipid production. Using optimal medium and operating conditions (37°C, pH 6.8, and 250 rpm agitation) obtained from batch fermentation, P. aeruginosa S2 was able to produce up to 5.31 g/l of rhamnolipid from glucose-based medium. To further improve the rhamnolipid yield, a pH-stat fed-batch culture was performed by maintaining a constant pH of 6.8 through manipulating glucose feeding. The effect of influent glucose concentration on rhamnolipid yield and productivity was investigated. Using the pH-stat culture, a maximum rhamnolipid concentration (6.06 g/l) and production rate (172.5 ml/h/l) was obtained with 6% glucose in the feed. Moreover, combining pH-stat culture with fill-and-draw operation allowed a stable repeated fed-batch operation for approximately 500 h. A marked increase in rhamnolipid production was achieved, leading to the best rhamnolipid yield of approximately 9.4 g/l during the second repeated run.     

Fed-batch fermentation for production of Kluyveromyces marxianusFII 510700 cultivated on a lactose-based medium

A strain of Kluyveromyces marxianus was grown in batch culture in lactose-based media at varying initial lactose concentrations (10–60 g L^–1) at 30°C, pH 5.0, dissolved oxygen concentrations greater than 20%. Increasing the concentration of mineral salts three-fold at 40 g L^–1 and 60 g L^–1 initial lactose concentration showed only a small increase in the yield of biomass, from 0.38 g g^–1 to 0.41 g g^–1, indicating that the initial batch cultures were not significantly nutrient- (mineral salts)-limited. A relatively high biomass concentration (105 g L^–1) was obtained in fed-batch culture following extended lactose feeding. An average specific growth rate (0.27 h^–1), biomass yield (0.38 g g^–1) and overall productivity (2.9 g L^–1 h^–1) were obtained for these fed-batch conditions. This fed-batch protocol provides a strategy for achieving relatively high concentrations and productivities of K. marxianus on other lactose-based substrate streams (e.g., whey) from the dairy industry.     

Effect of Cultivation Conditions on Growth and Adhesion of Bacillus licheniformis

Adhesion to glass of actively growing cells of the thermophilic Bacillus licheniformis, isolated from the Medyaginskaya test borehole (Yaroslavl' oblast), was studied. The reversible adhesion (RA) manifests itself in a decline of cell density (without cell lysis) in the liquid culture over the first 20–40 min of growth followed by normal exponential growth. The RA is minimal under favorable growth conditions but increases when cells are transferred to a new medium, especially one with a pH, temperature, salinity, or concentration of Ca²⁺ ions nonoptimal for the given species. Under unfavorable growth conditions, the adhesion becomes irreversible. The obtained data suggest that RA represents an adaptation mechanism important for population survival.     

Isolation and characterization of a new keratinolytic Bacillus licheniformis strain

A keratin-degrading bacterium strain (K-508) was isolated from partially degraded feathers and characterized. This isolate exhibited a high chicken feather-degrading activity when cultured in feather-containing broth with a growth optimum of pH 7.0 and 47 °C. On the basis of its phenotypic characteristics (quickly moving, Gram-positive rods), the results of metabolic tests and rDNA sequence analysis, it was identified as Bacillus licheniformis. Its fermentation broth showed activity on N-Bz-l-Phe-l-Val-l-Arg-p-nitroanilide, N-Suc-l-Ala-l-Ala-l-Pro-l-Phe-p-nitroanilide, N-CBZ-Gly-Gly-l-Leu-p-nitroanilide and N-CBZ-l-Ala-l-Ala-l-Leu-p-nitroanilide as chromogenic protease substrates at near neutral pH. Both trypsin-like and chymotrypsin-like proteases were constitutively secreted by this strain.     

Arrowroot (Marantha arundinacea) starch as a new low-cost substrate for alkaline protease production

The feasibility of arrowroot (Marantha arundinacea) starch for alkaline protease production using an alkalophilic Bacillus lentus isolate was evaluated in batch fermentations in shake flasks and in a bioreactor under a range of conditions. A new arrowroot starch-casein medium (pH 10.2) was formulated having a composition (%, w/v): arrowroot starch 1, casein 1, sodium succinate 0.25, NH₄Cl 0.05, NaCl 0.05, KH₂PO₄ 0.04, K₂HPO₄ 0.03, MgCl₂ 0.01, yeast extract 0.01 and Na₂CO₃ 1.05. The isolate produced a maximum protease yield (6754.7 U ml^–1) in this medium when grown for 72 h at 250 rev/min and 37 °C. Scaling-up studies in a bioreactor showed a 5-fold increase in alkaline protease yields (31899 U ml^–1) at a lower production time of 45 h, aeration of 1 v/v/m and agitation of 400 rev/min at 37 °C.     

Chitobiose production by using a novel thermostable chitinase from Bacillus licheniformis strain JS isolated from a mushroom bed

The thermophilic Bacillus licheniformis strain JS was isolated from a bed of mushrooms, Pleurotus sajor-caju. The organism could produce a novel, single-component, thermostable chitinase that was purified by ion-exchange chromatography using DEAE-cellulose in 7.64% yield and in an 8.1-fold enhancement in purity. Its molecular weight is 22 kDa. The enzyme is a chitobiosidase, since the chitin hydrolysate is N^I,N^II-diacetylchitobiose. The optimum temperature for enzyme activity is 55 °C, and the optimum pH is 8.0. It was completely inhibited by Hg²⁺ ions whereas Co²⁺ ions served as an activator. The thermostability of this enzyme is important in the bioconversion of chitinous waste and for the production of chitooligosaccharides.     

Multi-copy expression and fed-batch production of Rhodotorula araucariae epoxide hydrolase in Yarrowia lipolytica

Epoxide hydrolases (EHs) of fungal origin have the ability to catalyze the enantioselective hydrolysis of epoxides to their corresponding diols. However, wild type fungal EHs are limited in substrate range and enantioselectivity. Additionally, the production of fungal epoxide hydrolase (EH) by wild-type strains is typically very low. In the present study, the EH-encoding gene from Rhodotorula araucariae was functionally expressed in Yarrowia lipolytica, under the control of a growth phase inducible hp4d promoter, in a multi-copy expression cassette. The transformation experiments yielded a positive transformant, with a final EH activity of 220 U/g dw in shake-flask cultures. Evaluation of this transformant in batch fermentations resulted in ~ 7-fold improvement in EH activity over the flask scale. Different constant specific feed rates were tested in fed-batch fermentations, resulting in an EH activity of 1,750 U/g dw at a specific feed rate of ~ 0.1 g/g/h, in comparison to enzyme production levels of 0.3 U/g dw for the wild type R. araucariae and 52 U/g dw for an Escherichia coli recombinant strain expressing the same gene. The expression of EH in Y. lipolytica using a multi-copy cassette demonstrates potential for commercial application.     

Thermotolerant strain of Bacillus licheniformis producing lipase

A thermotolerant variant of Bacillus licheniformis strain H1 (isolated from Jordan valley soil), was highly active in degrading macromolecules, and possessed a lipase activity with a half life of 30 min at 70°C. This activity was produced during exponential growth. The extracellular crude lipase showed maximal activity at pH 10, and retained 65% of its stability at pH 12.The author is with the Department of Biological Sciences, University of Jordan, P.O. Box 2686, Amman 11181, Jordan     

Fermentation characteristics and secretion of proteases of a new keratinolytic strain of Bacillus licheniformis

A keratin-degrading strain of Bacillus licheniformis (K-508) was isolated from partially-degraded feathers and characterised. It had high chicken feather-degrading activity when cultured in feather-containing broth, with a growth optimum at pH 7 and 47 °C. Broth filtrates were active towards N-Bz-Phe-Val-Arg-p-nitroanilide and N-Suc-Ala-Ala-Pro-Phe-p-nitroanilide, as chromogenic protease substrates at pH 8. Strain K-508 displays keratinolytic activity against native feather keratin (without any pretreatment) in the presence of SH-reducing compounds. It constitutively secreted both trypsin-like and chymotrypsin-like proteases.     

Purification and characterization of a family 5 endoglucanase from a moderately thermophilic strain of Bacillus licheniformis

Strains of thermophilic bacilli were screened for cellulolytic activity by gel diffusion assay on selective medium at 55°C. Strain B-41361, identified as a strain of Bacillus licheniformis, displayed activity against carboxymethylcellulose. Zymogram analysis demonstrated several catalytically active polypeptides with the most prominent species having a mass of 37 kDa. The enzyme was purified 60-fold with a 17% yield and specific activity of 183 U/mg. The amino terminal sequence was homologous to members of glycoside hydrolase family 5. Optimal temperature was 65°C (measured over 30 min), but the enzyme was most stable at 60°C, retaining greater than 90% activity after one hour. The enzyme had a broad pH range, with maximal activity at pH 6.0, 75% maximal activity at pH 4.5, and 40% at pH 10. The enzyme hydrolyzed p-nitrophenylcellobioside, barley β-glucan, and lichenan, but no activity was detected against avicel or acid-swollen cellulose.Mention of a trade name or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.