Characterization of a neopullulanase and an alpha-glucosidase from Bacteroides thetaiotaomicron 95-1.

Previously, we constructed a gene disruption in the pullulanase I gene of Bacteroides thetaiotaomicron 5482A. This mutant, designated B. thetaiotaomicron 95-1, had a lower level of pullulanase specific activity than did wild-type B. thetaiotaomicron but still exhibited a substantial amount of pullulanase activity. Characterization of the remaining pullulanase activity present in B. thetaiotaomicron 95-1 has identified an alpha(1----4)-D-glucosidic bond cleaving pullulanase which has been tentatively designated a neopullulanase. The neopullulanase (pullulanase II) is a 70-kDa soluble protein which cleaves alpha(1----4)-D-glucosidic bonds in pullulan to produce panose. The neopullulanase also cleaved alpha(1----4) bonds in amylose and in oligosaccharides of maltotriose through maltoheptaose in chain length. An alpha-glucosidase from B. thetaiotaomicron 95-1 was characterized. The alpha-glucosidase was partially purified to a preparation containing three proteins of 80, 57, and 50 kDa. Pullulan and amylose were not hydrolyzed by the alpha-glucosidase. alpha(1----4)-D-Glucosidic oligosaccharides from maltose to maltoheptaose were hydrolyzed to glucose by the alpha-glucosidase. The alpha-glucosidase also hydrolyzed alpha(1----6)-linked oligosaccharides such as panose (the product of the pullulanase II action on pullulan) and isomaltotriose.     

Genetic evidence that outer membrane binding of starch is required for starch utilization by Bacteroides thetaiotaomicron

Mutagenesis of Bacteroides thetaiotaomicron with the transposon Tn4351 produced five classes of mutants that were not able to grow on amylose or amylopectin. These classes of mutants differed in their ability to grow on maltoheptaose (G7) and in the level of starch-degrading enzymes produced when bacteria were grown on maltose. All of the mutants were deficient in starch binding. Since one class of mutants retained normal levels of starch-degrading enzymes, this indicates that binding of the starch molecule by a cell surface receptor is necessary for starch utilization by B. thetaiotaomicron. Analysis of a starch-negative mutant that grew on G7 indicated that B. thetaiotaomicron possessed two starch-binding components or sites. One component (site A), apparently missing in this mutant, had an absolute preference for larger starch oligomers, whereas the other component (site M) also had a high affinity for maltodextrins (G4 through G7). Mutants not able to grow on maltodextrins (greater than G4) probably lacked both of these binding components. Only one class of mutants did not grow normally on maltose, but instead had a 4- to 5-h lag on maltose and a slower growth rate than the wild type. This class of mutants did not produce any of the starch-degrading enzymes or bind starch, even when growing on maltose. Such a phenotype probably resulted from transposon inactivation of a central regulatory gene or a gene encoding an enzyme that produces the inducer. The fact that both the degradative enzymes and the starch-binding activity were affected in this mutant indicates that genes encoding the cell surface starch-binding site are under the same regulatory control as genes encoding the enzymes.     

Cell-associated pullulanase from Bacteroides thetaiotaomicron: cloning, characterization, and insertional mutagenesis to determine role in pullulan utilization.

We have cloned a pullulanase gene from Bacteroides thetaiotaomicron. The pullulanase expressed from this clone in Escherichia coli was cell associated and soluble and had a molecular mass of 72 kilodaltons by gel filtration. Maxicell analysis of proteins coded by the cloned insert showed that a 71.6- to 73.2-kilodalton doublet was associated with pullulanase activity. Thus, the pullulanase is probably a monomer. The cloned pullulanase produced maltotriose as an end product of pullulan digestion. In B. thetaiotaomicron the pullulanase activity was cell associated. Approximately 80% of the activity was soluble, and 16 to 18% was membrane associated. The molecular mass of the soluble pullulanase was 77 kilodaltons by gel filtration. To determine whether the cloned pullulanase gene was essential for pullulan utilization, we used directed insertional mutagenesis to inactivate the B. thetaiotaomicron pullulanase gene. The pullulanase specific activity of the mutant was approximately 45% of that of wild-type B. thetaiotaomicron. However, the pullulanase-negative insertional mutant 95-1 was still able to grow on pullulan at a rate similar to that of wild-type B. thetaiotaomicron. Thus, there must be a second pullulanase in B. thetaiotaomicron.     

Biochemical evidence that starch breakdown by Bacteroides thetaiotaomicron involves outer membrane starch-binding sites and periplasmic starch-degrading enzymes.

Bacteroides thetaiotaomicron can utilize amylose, amylopectin, and pullulan as sole sources of carbon and energy. The enzymes that degrade these polysaccharides were found to be primarily cell associated rather than extracellular. Although some activity was detected in extracellular fluid, this appeared to be the result of cell lysis. The cell-associated amylase, amylopectinase, and pullulanase activities partitioned similarly to the periplasmic marker, acid phosphatase, when cells were exposed to a cold-shock treatment. Two other enzymes associated with starch breakdown, alpha-glucosidase and maltase, appeared to be located in the cytoplasm. Intact cells of B. thetaiotaomicron were found to bind 14C-starch. Binding was probably mediated by a protein because it was saturable and was decreased by treatment of cells with proteinase K. Results of competition experiments showed that the starch-binding proteins had a preference for maltodextrins larger than maltohexaose and a low affinity for maltose and maltotriose. Both the degradative enzymes and starch binding were induced by maltose. These findings indicate that starch utilization by B. thetaiotaomicron apparently does not involve secretion of extracellular enzymes. Rather, binding of the starch molecule to the cell surface appears to be a first step to passing the molecule through the outer membrane and into the periplasmic space.     

Screening for and identification of starch-, amylopectin-, and pullulan-degrading activities in bifidobacterial strains

Forty-two bifidobacterial strains were screened for alpha-amylase and/or pullulanase activity by investigating their capacities to utilize starch, amylopectin, or pullulan. Of the 42 bifidobacterial strains tested, 19 were capable of degrading potato starch. Of these 19 strains, 11 were able to degrade starch and amylopectin, as well as pullulan. These 11 strains, which were shown to produce extracellular starch-degrading activities, included 5 strains of Bifidobacterium breve, 1 B. dentium strain, 1 B. infantis strain, 3 strains of B. pseudolongum, and 1 strain of B. thermophilum. Quantitative and qualitative enzyme activities were determined by measuring the concentrations of released reducing sugars and by high-performance thin-layer chromatography, respectively. These analyses confirmed both the inducible nature and the extracellular nature of the starch- and pullulan-degrading enzyme activities and showed that the five B. breve strains produced an activity that is consistent with type II pullulanase (amylopullulanase) activity, while the remaining six strains produced an activity with properties that resemble those of type III pullulan hydrolase.     

Structure, specificity and function of cyclomaltodextrinase, a multispecific enzyme of the alpha-amylase family

Cyclomaltodextrinase (CDase, EC 3.2.1.54), maltogenic amylase (EC 3. 2.1.133), and neopullulanase (EC 3.2.1.135) are reported to be capable of hydrolyzing all or two of the following three types of substrates: cyclomaltodextrins (CDs); pullulan; and starch. These enzymes hydrolyze CDs and starch to maltose and pullulan to panose by cleavage of alpha-1,4 glycosidic bonds whereas alpha-amylases essentially lack activity on CDs and pullulan. They also catalyze transglycosylation of oligosaccharides to the C3-, C4- or C6-hydroxyl groups of various acceptor sugar molecules. The present review surveys the biochemical, enzymatic, and structural properties of three types of such enzymes as defined based on the substrate specificity toward the CDs: type I, cyclomaltodextrinase and maltogenic amylase that hydrolyze CDs much faster than pullulan and starch; type II, Thermoactinomyces vulgaris amylase II (TVA II) that hydrolyzes CDs much less efficiently than pullulan; and type III, neopullulanase that hydrolyzes pullulan efficiently, but remains to be reported to hydrolyze CDs. These three types of enzymes exhibit 40-60% amino acid sequence identity. They occur in the cytoplasm of bacteria and have molecular masses from 62 to 90 kDa which are slightly larger than those of most alpha-amylases. Multiple amino acid sequence alignment and crystal structures of maltogenic amylase and TVA II reveal the presence of an N-terminal extension of approximately 130 residues not found in alpha-amylases. This unique N-terminal domain as seen in the crystal structures apparently contributes to the active site structure leading to the distinct substrate specificity through a dimer formation. In aqueous solution, most of these enzymes show a monomer-dimer equilibrium. The present review discusses the multiple specificity in the light of the oligomerization and the molecular structures arriving at a clarified enzyme classification. Finally, a physiological role of the enzymes is proposed.     

Highly thermostable amylase and pullulanase of the extreme thermophilic eubacterium Rhodothermus marinus: production and partial characterization

Five strains of the extreme thermophilic Rhodothermus marinus were screened for the production of amylolytic and pullulytic activities. The culture medium for the selected strain, R. marinus ITI 990, was optimized using central composite designs for enhanced enzyme production. The optimized medium containing 1.5 gl(-1) of maltose and 8.3 gl(-1) of yeast extract yielded amylase, pullulanase and alpha-glucosidase activities of 45, 33 and 2.1 nkatml(-1), respectively. Among the various carbon sources tested, maltose was most effective for the formation of these enzymes, followed by soluble maize starch, glycogen and pullulan. The crude amylase and pullulanase showed maximum activities at pH 6.5-7.0, and 85 and 80 degrees C, respectively. At 85 degrees C amylase and pullulanase had half lives of 3 h and 30 min, respectively.     

Screening for and Identification of Starch-, Amylopectin-, and Pullulan-Degrading Activities in Bifidobacterial Strains

Forty-two bifidobacterial strains were screened for α-amylase and/or pullulanase activity by investigating their capacities to utilize starch, amylopectin, or pullulan. Of the 42 bifidobacterial strains tested, 19 were capable of degrading potato starch. Of these 19 strains, 11 were able to degrade starch and amylopectin, as well as pullulan. These 11 strains, which were shown to produce extracellular starch-degrading activities, included 5 strains of Bifidobacterium breve, 1 B. dentium strain, 1 B. infantis strain, 3 strains of B. pseudolongum, and 1 strain of B. thermophilum. Quantitative and qualitative enzyme activities were determined by measuring the concentrations of released reducing sugars and by high-performance thin-layer chromatography, respectively. These analyses confirmed both the inducible nature and the extracellular nature of the starch- and pullulan-degrading enzyme activities and showed that the five B. breve strains produced an activity that is consistent with type II pullulanase (amylopullulanase) activity, while the remaining six strains produced an activity with properties that resemble those of type III pullulan hydrolase.     

Thermostable Amylolytic Enzymes from a New Clostridium Isolate

A new Clostridium strain was isolated on starch at 60°C. Starch, pullulan, maltotriose, and maltose induced the synthesis of α-amylase and pullulanase, while glucose, ribose, fructose, and lactose did not. The formation of the amylolytic enzymes was dependent on growth and occurred predominantly in the exponential phase. The enzymes were largely cell bound during growth of the organism with 0.5% starch, but an increase of the starch concentration in the growth medium was accompanied by the excretion of α-amylase and pullulanase into the culture broth; but also by a decrease of total activity. α-Amylase, pullulanase, and α-glucosidase were active in a broad temperature range (40 to 85°C) and displayed temperature optima for activity at 60 to 70°C. During incubation with starch under aerobic conditions at 75°C for 2 h, the activity of both enzymes decreased to only 90 or 80%. The apparent K_m values of α-amylase, pullulanase, and α-glucosidase for their corresponding substrates, starch, pullulan, and maltose were 0.35 mg/ml, 0.63 mg/ml, and 25 mM, respectively.     

Location and characterization of genes involved in binding of starch to the surface of Bacteroides thetaiotaomicron.

Previous studies of starch utilization by the gram-negative anaerobe Bacteroides thetaiotaomicron have demonstrated that the starch-degrading enzymes are cell associated rather than extracellular, indicating that the first step in starch utilization is binding of the polysaccharide to the bacterial surface. Five transposon-generated mutants of B. thetaiotaomicron which were defective in starch binding (Ms-1 through Ms-5) had been isolated, but initial attempts to identify membrane proteins missing in these mutants were not successful. We report here the use of an immunological approach to identify four maltose-inducible membrane proteins, which were missing in one or more of the starch-binding mutants of B. thetaiotaomicron. Three of the maltose-inducible proteins were outer membrane proteins (115, 65, and 43 kDa), and one was a cytoplasmic membrane protein (80 kDa). The genes encoding these proteins were shown to be clustered in an 8.5-kbp segment of the B. thetaiotaomicron chromosome. Two other loci defined by transposon insertions, which appeared to contain regulatory genes, were located within 7 kbp of the cluster of membrane protein genes. The 115-kDa outer membrane protein was essential for utilization of maltoheptaose (G7), whereas loss of the other proteins affected growth on starch but not on G7. Not all of the proteins missing in the mutants were maltose regulated. We also detected two constitutively produced proteins (32 and 50 kDa) that were less prominent in all of the mutants than in the wild type. Both of these were outer membrane proteins.     

Gene cloning, nucleotide sequence and biochemical properties of a cytoplasmic cyclomaltodextrinase (neopullulanase) from Alicyclobacillus acidocaldarius, reclassification of a group of enzymes

A gene encoding a cyclomaltodextrinase (neopullulanase) was cloned from the thermoacidophilic bacterium Alicyclobacillus acidocaldarius ATCC27009 and its nucleotide sequence was determined. The encoded CdaA protein lacked an N-terminal signal sequence and aligned well with a family of bacterial proteins described as maltogenic alpha-amylases, neopullulanases or cyclomaltodextrinases. Escherichia coli cells harboring the cloned cdaA gene produced a 66-kDa protein that degraded pullulan in a sodium dodecyl sulfate-polyacrylamide gel. A. acidocaldarius cells grown on maltose, soluble starch or pullulan synthesized the same protein. Neopullulanase activity of the protein was cytoplasmic and its pH optimum of 5.5 was close to the pH value of the cytoplasm. CdaA degraded cyclomaltodextrins rapidly and pullulan (to panose) more slowly. It is proposed that CdaA functions as a cytoplasmic cyclomaltodextrinase (EC 3.2.1.54).     

Cloning, sequencing, and characterization of a heat- and alkali-stable type I pullulanase from Anaerobranca gottschalkii

The gene encoding a type I pullulanase was identified from the genome sequence of the anaerobic thermoalkaliphilic bacterium Anaerobranca gottschalkii. In addition, the homologous gene was isolated from a gene library of Anaerobranca horikoshii and sequenced. The proteins encoded by these two genes showed 39% amino acid sequence identity to the pullulanases from the thermophilic anaerobic bacteria Fervidobacterium pennivorans and Thermotoga maritima. The pullulanase gene from A. gottschalkii (encoding 865 amino acids with a predicted molecular mass of 98 kDa) was cloned and expressed in Escherichia coli strain BL21(DE3) so that the protein did not have the signal peptide. Accordingly, the molecular mass of the purified recombinant pullulanase (rPulAg) was 96 kDa. Pullulan hydrolysis activity was optimal at pH 8.0 and 70 degrees C, and under these physicochemical conditions the half-life of rPulAg was 22 h. By using an alternative expression strategy in E. coli Tuner(DE3)(pLysS), the pullulanase gene from A. gottschalkii, including its signal peptide-encoding sequence, was cloned. In this case, the purified recombinant enzyme was a truncated 70-kDa form (rPulAg'). The N-terminal sequence of purified rPulAg' was found 252 amino acids downstream from the start site, presumably indicating that there was alternative translation initiation or N-terminal protease cleavage by E. coli. Interestingly, most of the physicochemical properties of rPulAg' were identical to those of rPulAg. Both enzymes degraded pullulan via an endo-type mechanism, yielding maltotriose as the final product, and hydrolytic activity was also detected with amylopectin, starch, beta-limited dextrins, and glycogen but not with amylose. This substrate specificity is typical of type I pullulanases. rPulAg was inhibited by cyclodextrins, whereas addition of mono- or bivalent cations did not have a stimulating effect. In addition, rPulAg' was stable in the presence of 0.5% sodium dodecyl sulfate, 20% Tween, and 50% Triton X-100. The pullulanase from A. gottschalkii is the first thermoalkalistable type I pullulanase that has been described.     

Isolation, characterization, and identification of Geobacillus thermodenitrificans HRO10, an alpha-amylase and alpha-glucosidase producing thermophile

Thermophilic and amylolytic aerobic bacteria were isolated from soil through a selective enrichment procedure at 60 degrees C with starch as the carbon source. One of the isolates designated as HRO10 produced glucose aside from limit dextrin as the only hydrolysis product from starch and was characterized in detail. The starch-degrading enzymes produced by strain HRO10 were determined to be alpha-amylase and alpha-glucosidase. Whereas the alpha-amylase activity was detected exclusively in the culture supernatant, alpha-glucosidase occurred intracellular, extracellular, or on the surface of the bacteria depending on the growth phase. The optimum temperature and pH required for the growth of strain HRO10 were about 50 degrees C and pH 6.5 to 7.5. The strain used different carbohydrates as the carbon source, but the maximum production of alpha-amylase occurred when 1.0% (w/v) starch or dextrin was used. The use of organic vs. inorganic nitrogen favored the production of alpha-amylase in strain HRO10. The metal ions Li+, Mg2+, and Mn2+ stimulated the production of both enzymes. Identification of strain HRO10 by physiological and molecular methods including sequencing of the 16S rDNA showed that this strain belongs to the species Geobacillus thermodenitrificans. Biochemically, strain HRO10 differs from the type strain DSM 465 only in its ability to hydrolyze starch.     

Characterization of ApuB, an extracellular type II amylopullulanase from Bifidobacterium breve UCC2003

The apuB gene of Bifidobacterium breve UCC2003 was shown to encode an extracellular amylopullulanase. ApuB is composed of a distinct N-terminally located alpha-amylase-containing domain which hydrolyzes alpha-1,4-glucosidic linkages in starch and related polysaccharides and a C-terminally located pullulanase-containing domain which hydrolyzes alpha-1,6 linkages in pullulan, allowing the classification of this enzyme as a bifunctional class II pullulanase. A knockout mutation of the apuB gene in B. breve UCC2003 rendered the resulting mutant incapable of growth in medium containing starch, amylopectin, glycogen, or pullulan as the sole carbon and energy source, confirming the crucial physiological role of this gene in starch metabolism.     

一种新型淀粉酶的鉴定及其产酶菌株的筛选

对筛选到的菌株ZX99产生的一种新型淀粉酶（异麦芽低聚糖酶）进行了分析鉴定,ZX99菌株能产生一种胞外淀粉酶,该酶能催化淀粉的降解产生异麦芽低聚糖,对原产酶菌株ZX99多次进行紫外线照射诱变后,获得了优良,稳定的变异菌株RB3．232,其产酶水平为原株的160％,产物薄层层析证明,该酶能催化淀粉的降解,产生异麦芽糖,潘糖,异麦芽三糖和异麦芽四糖等低聚糖,但对普鲁兰基本不起作用,由此证明它是一种不同于新型普鲁兰酶（nepullulanase)和 传统淀粉酶（amylase)的一种新型淀粉酶。     

A new thermoactive pullulanase from Desulfurococcus mucosus: cloning, sequencing, purification, and characterization of the recombinant enzyme after expression in Bacillus subtilis

The gene encoding a thermoactive pullulanase from the hyperthermophilic anaerobic archaeon Desulfurococcus mucosus (apuA) was cloned in Escherichia coli and sequenced. apuA from D. mucosus showed 45.4% pairwise amino acid identity with the pullulanase from Thermococcus aggregans and contained the four regions conserved among all amylolytic enzymes. apuA encodes a protein of 686 amino acids with a 28-residue signal peptide and has a predicted mass of 74 kDa after signal cleavage. The apuA gene was then expressed in Bacillus subtilis and secreted into the culture fluid. This is one of the first reports on the successful expression and purification of an archaeal amylopullulanase in a Bacillus strain. The purified recombinant enzyme (rapuDm) is composed of two subunits, each having an estimated molecular mass of 66 kDa. Optimal activity was measured at 85 degrees C within a broad pH range from 3.5 to 8.5, with an optimum at pH 5.0. Divalent cations have no influence on the stability or activity of the enzyme. RapuDm was stable at 80 degrees C for 4 h and exhibited a half-life of 50 min at 85 degrees C. By high-pressure liquid chromatography analysis it was observed that rapuDm hydrolyzed alpha-1,6 glycosidic linkages of pullulan, producing maltotriose, and also alpha-1,4 glycosidic linkages in starch, amylose, amylopectin, and cyclodextrins, with maltotriose and maltose as the main products. Since the thermoactive pullulanases known so far from Archaea are not active on cyclodextrins and are in fact inhibited by these cyclic oligosaccharides, the enzyme from D. mucosus should be considered an archaeal pullulanase type II with a wider substrate specificity.     

Pattern of action of Bacillus stearothermophilus neopullulanase on pullulan.

The action of neopullulanase from Bacillus stearothermophilus on many oligosaccharides was tested. The enzyme hydrolyzed not only alpha-(1----4)-glucosidic linkages but also specific alpha-(1----6)-glucosidic linkages of several branched oligosaccharides. When pullulan was used as a substrate, panose, maltose, and glucose, in that order, were produced as final products at a final molar ratio of 3:1:1. According to these results, we proposed a model for the pattern of action of neopullulanase on pullulan as follows. In the first step, the enzyme hydrolyzes only alpha-(1----4)-glucosidic linkages on the nonreducing side of alpha-(1----6) linkages of pullulan and produces panose and several intermediate products composed of some panose units. In the second step, taking 6(2)-O-alpha-(6(3)-O-alpha-glucosyl-maltotriosyl)-maltose as an example of one of the intermediate products, the enzyme hydrolyzes either alpha-(1----4) (the same position as that described above) or alpha-(1----6) linkages and produces panose or 6(3)-O-alpha-glucosyl-maltotriose plus maltose, respectively. In the third step, the alpha-(1----4) linkage of 6(3)-O-alpha-glucosyl-maltotriose is hydrolyzed by the enzyme, and glucose and another panose are produced. To confirm the model of the pattern of action, we extracted intermediate products produced from pullulan by neopullulanase and analyzed the structures by glucoamylase, pullulanase, and neopullulanase analyses. The experimental results supported the above-mentioned model of the pattern of action of neopullulanase on pullulan.     

Molecular cloning and biochemical characterization of a heat-stable type I pullulanase from Thermotoga neapolitana

The gene encoding a type I pullulanase from the hyperthermophilic anaerobic bacterium Thermotoga neapolitana (pulA) was cloned in Escherichia coli and sequenced. The pulA gene from T. neapolitana showed 91.5% pairwise amino acid identity with pulA from Thermotoga maritima and contained the four regions conserved in all amylolytic enzymes. pulA encodes a protein of 843 amino acids with a 19-residue signal peptide. The pulA gene was subcloned and overexpressed in E. coli under the control of the T7 promoter. The purified recombinant enzyme (rPulA) produced a 93-kDa protein with pullulanase activity. rPulA was optimally active at pH 5-7 and 80°C and had a half-life of 88 min at 80°C. rPulA hydrolyzed pullulan, producing maltotriose, and hydrolytic activities were also detected with amylopectin, starch, and glycogen, but not with amylose. This substrate specificity is typical of a type I pullulanase. Thin layer chromatography of the reaction products in the reaction with pullulan and aesculin showed that the enzyme had transglycosylation activity. Analysis of the transfer product using NMR and isoamylase treatment revealed it to be α-maltotriosyl-(1,6)-aesculin, suggesting that the enzyme transferred the maltotriosyl residue of pullulan to aesculin by forming α-1,6-glucosidic linkages. Our findings suggest that the pullulanase from T. neapolitana is the first thermostable type I pullulanase which has α-1,6-transferring activity.     

Pullulanase type I from Fervidobacterium pennavorans Ven5: cloning, sequencing, and expression of the gene and biochemical characterization of the recombinant enzyme

The gene encoding the type I pullulanase from the extremely thermophilic anaerobic bacterium Fervidobacterium pennavorans Ven5 was cloned and sequenced in Escherichia coli. The pulA gene from F. pennavorans Ven5 had 50.1% pairwise amino acid identity with pulA from the anaerobic hyperthermophile Thermotoga maritima and contained the four regions conserved among all amylolytic enzymes. The pullulanase gene (pulA) encodes a protein of 849 amino acids with a 28-residue signal peptide. The pulA gene was subcloned without its signal sequence and overexpressed in E. coli under the control of the trc promoter. This clone, E. coli FD748, produced two proteins (93 and 83 kDa) with pullulanase activity. A second start site, identified 118 amino acids downstream from the ATG start site, with a Shine-Dalgarno-like sequence (GGAGG) and TTG translation initiation codon was mutated to produce only the 93-kDa protein. The recombinant purified pullulanases (rPulAs) were optimally active at pH 6 and 80 degrees C and had a half-life of 2 h at 80 degrees C. The rPulAs hydrolyzed alpha-1,6 glycosidic linkages of pullulan, starch, amylopectin, glycogen, alpha-beta-limited dextrin. Interestingly, amylose, which contains only alpha-1,4 glycosidic linkages, was not hydrolyzed by rPulAs. According to these results, the enzyme is classified as a debranching enzyme, pullulanase type I. The extraordinary high substrate specificity of rPulA together with its thermal stability makes this enzyme a good candidate for biotechnological applications in the starch-processing industry.