Novel cyanine dye-labeled dideoxynucleoside triphosphates for DNA sequencing

Single color cyanine dye-labeled (Cy 5.0 and Cy 5.5) dideoxynucleoside-5'-triphosphates, or 'terminators', containing different spacer lengths were synthesized and evaluated for efficacy in DNA sequencing methods using a modified thermally stable DNA polymerase. The single color cyanine dye terminators were formulated into two separate sets of sequencing mixes, one for Cy 5.0 and the other for Cy 5.5, and evaluated on different automated sequencing platforms. Each set of mixes included two pyrimidine terminators with 17-atom linkers and two purine terminators with 10-atom linkers between the dye and the nucleotide. The two sets of cyanine dye-labeled terminators chosen for this cycle sequencing study produced improved band patterns with band uniformity similar to that obtained with dye-primer sequencing methods.     

Uniform Band Intensities in Fluorescent Dye Terminator Sequencing

Abstract

The use of Cyanine dye (Cy^TM 5 and Cy5.5) labeled dideoxy terminators with Thermo Sequenase^TM DNA polymerase in DNA sequencing provides uniform band intensity, improved sequence read-length, and accuracy. It also greatly improves the ability to detect single base heterozygotes with dye-terminator sequencing method.     

Comparison of the Sequence-Dependent Fluorescence of the Cyanine Dyes Cy3, Cy5, DyLight DY547 and DyLight DY647 on Single-Stranded DNA

Cyanine dyes are commonly used for fluorescent labeling of DNA and RNA oligonucleotides in applications including qPCR, sequencing, fluorescence in situ hybridization, Förster resonance energy transfer, and labeling for microarray hybridization. Previous research has shown that the fluorescence efficiency of Cy3 and Cy5, covalently attached to the 5′ end of single-stranded DNA, is strongly sequence dependent. Here, we show that DY547 and DY647, two alternative cyanine dyes that are becoming widely used for nucleic acid labeling, have a similar pattern of sequence-dependence, with adjacent purines resulting in higher intensity and adjacent cytosines resulting in lower intensity. Investigated over the range of all 1024 possible DNA 5mers, the intensities of Cy3 and Cy5 drop by ∼50% and ∼65% with respect to their maxima, respectively, whereas the intensities of DY547 and DY647 fall by ∼45% and ∼40%, respectively. The reduced magnitude of change of the fluorescence intensity of the DyLight dyes, particularly of DY647 in comparison with Cy5, suggests that these dyes are less likely to introduce sequence-dependent bias into experiments based on fluorescent labeling of nucleic acids.     

Factors Affecting the Tailing of Blunt End DNA with Fluorescent Pyrimidine dNTPs

The transferase activity of non-proofreading DNA polymerases is a well-known phenomenon that has been utilized in cloning and sequencing applications. The non-templated addition of modified nucleotides at DNA blunt ends is a potentially useful feature of DNA polymerases that can be used for selective transformation of DNA 3′ ends. In this paper, we characterized the tailing reaction at perfectly matched and mismatched duplex ends with Cy3- and Cy5-modified pyrimidine nucleotides. It was shown that the best DNA tailing substrate does not have a perfect Watson–Crick base pair at the end. Mismatched duplexes with a 3′ dC were the most efficient in the Taq DNA polymerase-catalysed tailing reaction with a Cy5-modified dUTP. We further demonstrated that the arrangement of the dye residue relative to the nucleobase notably affects the outcome of the tailing reaction. A comparative study of labelled deoxycytidine and deoxyuridine nucleotides showed higher efficiency for dUTP derivatives. The non-templated addition of modified nucleotides by Taq polymerase at a duplex blunt end was generally complicated by the pyrophosphorolysis and 5′ exonuclease activity of the enzyme.     

Silver particles enhance emission of fluorescent DNA oligomers

Here we describe a new opportunity in methodology for increasing the detectability of fluorescently labeled DNA on solid substrates. We show that the use of glass substrates coated with metallic silver particles results in an approximate 5-fold increase in the intensity of Cy3- or Cy5-labeled DNA oligomers. Proximity to these silver particles also increases the photostability of Cy3- and Cy5-labeled oligomers. These results suggest the use of DNA array substrates with silver particles for increased sensitivity in genetic analysis.     

Towards single-molecule DNA sequencing: assays with low nonspecific adsorption

New DNA sequencing techniques are currently being developed using single-molecule fluorescence-based detection of enzymatic double-strand synthesis. Such application requires surface architectures on which single-stranded templates can be immobilized. A further important attribute is a very low tendency to attract fluorescently labeled bases nonspecifically. On this account, the adsorption behaviour of Cy5-dNTPs on a variety of surface coatings was studied by performing real-time measurements of the DNA synthesis using a supercritical angle fluorescence biosensor. It is demonstrated that polyacrylic acid coatings are an excellent choice to minimize the nonspecific binding of the bases.     

Possible sources of dye-related signal correlation bias in two-color DNA microarray assays

DNA microarray analyses commonly use two spectrally distinct fluorescent labels to simultaneously compare different mRNA pools. Signal correlation bias currently limits accepted resolution to twofold changes in gene expression. This bias was investigated by (i) examining fluorescence and absorption spectra and changes in relative fluorescence of DNAs labeled with the Cy3, Cy5, Alexa Fluor 555, and Alexa Fluor 647 dyes and by (ii) using homotypic hybridization assays to compare the Cy dye pair with the Alexa Fluor dye pair. Cy3 or Cy5 dye-labeled DNA exhibited reduced fluorescence and absorption anomalies that were eliminated by nuclease treatment, consistent with fluorescence quenching that arises from dye-dye or dye-DNA-dye interactions. Alexa Fluor 555 and Alexa Fluor 647 dye-labeled DNA exhibited little or no such anomalies. In microarray hybridization, the Alexa Fluor dye pair provided higher signal correlation coefficients (R2) than did the Cy dye pair; at the 95% prediction level, a 1.3-fold change in gene expression was significant using the Alexa Fluor dye pair. Lowered signal correlation of the Cy dye pair was associated with high variance in Cy5 dye signals. These results indicate that fluorescence quenching may be a source of signal bias associated with the Cy dye pair.     

Development of the Handy Bio-Strand and its application to genotyping of OPRM1 (A118G)

We previously developed a three-dimensional microarray system, the Bio-Strand, which exhibits advantages in automated DNA analysis in combination with our Magtration Technology. In the current study, we have developed a compact system for the Bio-Strand, the Handy Bio-Strand, which consists of several tools for the preparation of Bio-Strand Tip, hybridization, and detection. Using the Handy Bio-Strand, we performed single nucleotide polymorphism (SNP) genotyping of OPRM1 (A118G) by allele-specific oligonucleotide competitive hybridization (ASOCH). DNA fragments containing SNP sites were amplified from genomic DNA by PCR and then were fixed on a microporous nylon thread. Thus, prepared Bio-Strand Tip was hybridized with allele-specific Cy5 probes (<15mer), on which the SNP site was designed to be located in the center. By optimizing the amount of competitors, the selectivity of Cy5 probes increased without a drastic signal decrease. OPRM1 (A118G) genotypes of 23 human genomes prepared from whole blood samples were determined by ASOCH using the Handy Bio-Strand. The results were perfectly consistent with those determined by PCR direct sequencing. ASOCH using the Handy Bio-Strand would be a very simple and reliable method for SNP genotyping for small laboratories and hospitals.     

Fluorescence stopped-flow studies of single turnover kinetics of E.coli RecBCD helicase-catalyzed DNA unwinding

We have developed and optimized a stopped-flow fluorescence assay for use in studying DNA unwinding catalyzed by Escherichia coli RecBCD helicase. This assay monitors changes in fluorescence resonance energy transfer (FRET) between a pair of fluorescent probes (Cy3 donor and Cy5 acceptor) placed on opposite sides of a nick in duplex DNA. As such, this is an "all-or-none" DNA unwinding assay. Single turnover DNA unwinding experiments were performed using a series of eight fluorescent DNA substrates containing duplex DNA regions ranging from 24 bp to 60 bp. The time-courses obtained by monitoring Cy3 fluorescence display a distinct lag phase that increases with increasing duplex DNA length, reflecting the transient formation of partially unwound DNA intermediates. These Cy3 FRET time-courses are identical with those obtained using a chemical quenched-flow kinetic assay developed previously. The signal from the Cy5 fluorescence probe shows additional effects that appear to specifically monitor the RecD helicase subunit. The continuous nature of this fluorescence assay enabled us to acquire more precise time-courses for many more duplex DNA lengths in a significantly reduced amount of time, compared to quenched-flow methods. Global analysis of the Cy3 and Cy5 FRET time-courses, using an n-step sequential DNA unwinding model, indicates that RecBCD unwinds duplex DNA with an average unwinding rate constant of kU = 200(+/-40) steps s(-1) (mkU = 680(+/-12)bp s(-1)) and an average kinetic step size, m = 3.4 (+/-0.6) bp step(-1) (5 mM ATP, 10 mM MgCl(2), 30 mM NaCl, pH 7.0, 5% (v/v) glycerol, 25.0 degrees C), in excellent agreement with the kinetic parameters determined using quenched-flow techniques. Under these same conditions, the RecBC enzyme unwinds DNA with a very similar rate. These methods will facilitate detailed studies of the mechanisms of DNA unwinding and translocation of the RecBCD and RecBC helicases.     

Multiple hybridization-extension sequencing (MHES) on microarray

Sequencing-by-synthesis (SBS) by fluorescein-labelled nucleotide incorporating into a target DNA template has been greatly concerned on microarray. The extended fluorophore-base must be required to be quenched prior to sequencing the next one. However, the low quenching efficiency has been an obstacle in length-read. Here, we present a new sequencing strategy, multiple hybridization-extension sequencing (MHES), to resolve the above problem. First, the sequencing primers hybridize to the ssDNA template immobilized on microarray. The first 3-5 bases next to the primer's end are sequenced by SBS of Cy5-dNTP. The extended primers are rapidly removed by lambda DNA exonuclease. Then, the same primers hybridize to the same ssDNA templates again. The sequenced bases are polished by natural dNTP. The other 3-5 bases next to the polished primer's end are sequenced. According to this principle, the unknown sequences of a target DNA could be sequenced after primers' hybridization-extension multiple times. Although the fluorescein-labelled nucleotides are also needed, it is unnecessary to quench the fluorophore-bases in the process of sequencing. It has been successfully demonstrated that 10 bp fragment from synthetic template and 10 bp fragment from DTBNP1 gene were accurately sequenced. The new method has a great potential in read-length and high-throughput sequencing on microarray.     

Tunable blinking kinetics of cy5 for precise DNA quantification and single-nucleotide difference detection

Fluorescence correlation spectroscopy (FCS) can resolve the intrinsic fast-blinking kinetics (FBKs) of fluorescent molecules that occur on the order of microseconds. These FBKs can be heavily influenced by the microenvironments in which the fluorescent molecules are contained. In this work, FCS is used to monitor the dynamics of fluorescence emission from Cy5 labeled on DNA probes. We found that the FBKs of Cy5 can be tuned by having more or less unpaired guanines (upG) and thymines (upT) around the Cy5 dye. The observed FBKs of Cy5 are found to predominantly originate from the isomerization and back-isomerization processes of Cy5, and Cy5-nucleobase interactions are shown to slow down these processes. These findings lead to a more precise quantification of DNA hybridization using FCS analysis, in which the FBKs play a major role rather than the diffusion kinetics. We further show that the alterations of the FBKs of Cy5 on probe hybridization can be used to differentiate DNA targets with single-nucleotide differences. This discrimination relies on the design of a probe-target-probe DNA three-way-junction, whose basepairing configuration can be altered as a consequence of a single-nucleotide substitution on the target. Reconfiguration of the three-way-junction alters the Cy5-upG or Cy5-upT interactions, therefore resulting in a measurable change in Cy5 FBKs. Detection of single-nucleotide variations within a sequence selected from the Kras gene is carried out to validate the concept of this new method.     

Metagenomic profiling: microarray analysis of an environmental genomic library

Genomic libraries derived from environmental DNA (metagenomic libraries) are useful for characterizing uncultured microorganisms. However, conventional library-screening techniques permit characterization of relatively few environmental clones. Here we describe a novel approach for characterization of a metagenomic library by hybridizing the library with DNA from a set of groundwater isolates, reference strains, and communities. A cosmid library derived from a microcosm of groundwater microorganisms was used to construct a microarray (COSMO) containing approximately 1-kb PCR products amplified from the inserts of 672 cosmids plus a set of 16S ribosomal DNA controls. COSMO was hybridized with Cy5-labeled genomic DNA from each bacterial strain, and the results were compared with the results for a common Cy3-labeled reference DNA sample consisting of a composite of genomic DNA from multiple species. The accuracy of the results was confirmed by the preferential hybridization of each strain to its corresponding rDNA probe. Cosmid clones were identified that hybridized specifically to each of 10 microcosm isolates, and other clones produced positive results with multiple related species, which is indicative of conserved genes. Many clones did not hybridize to any microcosm isolate; however, some of these clones hybridized to community genomic DNA, suggesting that they were derived from microbes that we failed to isolate in pure culture. Based on identification of genes by end sequencing of 17 such clones, DNA could be assigned to functions that have potential ecological importance, including hydrogen oxidation, nitrate reduction, and transposition. Metagenomic profiling offers an effective approach for rapidly characterizing many clones and identifying the clones corresponding to unidentified species of microorganisms.     

Metagenomic Profiling: Microarray Analysis of an Environmental Genomic Library

Genomic libraries derived from environmental DNA (metagenomic libraries) are useful for characterizing uncultured microorganisms. However, conventional library-screening techniques permit characterization of relatively few environmental clones. Here we describe a novel approach for characterization of a metagenomic library by hybridizing the library with DNA from a set of groundwater isolates, reference strains, and communities. A cosmid library derived from a microcosm of groundwater microorganisms was used to construct a microarray (COSMO) containing ~1-kb PCR products amplified from the inserts of 672 cosmids plus a set of 16S ribosomal DNA controls. COSMO was hybridized with Cy5-labeled genomic DNA from each bacterial strain, and the results were compared with the results for a common Cy3-labeled reference DNA sample consisting of a composite of genomic DNA from multiple species. The accuracy of the results was confirmed by the preferential hybridization of each strain to its corresponding rDNA probe. Cosmid clones were identified that hybridized specifically to each of 10 microcosm isolates, and other clones produced positive results with multiple related species, which is indicative of conserved genes. Many clones did not hybridize to any microcosm isolate; however, some of these clones hybridized to community genomic DNA, suggesting that they were derived from microbes that we failed to isolate in pure culture. Based on identification of genes by end sequencing of 17 such clones, DNA could be assigned to functions that have potential ecological importance, including hydrogen oxidation, nitrate reduction, and transposition. Metagenomic profiling offers an effective approach for rapidly characterizing many clones and identifying the clones corresponding to unidentified species of microorganisms.     

Fluorescently labeled model DNA sequences for exonucleolytic sequencing

We describe here the enzyme-catalyzed, low-density labeling of DNAs with fluorescent dyes. Firstly, for "natural" template DNAs, dNTPs were partially substituted in the labeling reactions by the respective fluorophore-bearing analogs. The DNAs were labeled by PCR using Taq DNA polymerase. The covalent incorporation of dye-dNTPs decreased in the following order: rhodamine-green-5-dUTP (Molecular Probes, the Netherlands), tetramethylrhodamine-4-dUTP (FluoroRed, Amersham Pharmacia Biotech), Cy5-dCTP (Amersham Pharmacia Biotech). Exonucleolytic degradation by the 3'-->5' exonuclease activity of T7 DNA polymerase (wild type) in the presence of excess reduced thioredoxin proceeded to complete breakdown of the labeled DNAs. The catalytic cleavage constants determined by fluorescence correlation spectroscopy were between 0.5 and 1.5 s(-1) at 16 degrees C, normalized for the covalently incorporated dye-nucleotides. Secondly, rhodamine-green-X-dUTP (Roche Diagnostics), tetramethylrhodamine-6-dUTP (Roche Diagnostics), and Cy5-dCTP were covalently incorporated into the antisense strand of "synthetic" 218-b DNA template constructs (master sequences) at well defined positions, starting from the primer binding site, by total substitution for the naturally occurring dNTPs. The 218-b DNA constructs were labeled by PCR with a thermostable 3'-->5' exonuclease deficient mutant of the Tgo DNA polymerase which we have selected. The advantage of the special, synthetic DNA constructs as compared to natural DNAs lies in the possibility of obtaining tailor-made nucleic acids, optimized for testing the performance of exonucleolytic sequencing. The number of incorporated fluorescent nucleotides determined by complete exonucleolytic degradation and fluorescence correlation spectroscopy were six out of six possible incorporations for rhodamine-green-X-dUTP and tetramethylrhodamine-6-dUTP, respectively. Their covalent and base-specific incorporations were confirmed by the novel analysis methodology of re-sequencing (i.e. mobility-shift gel electrophoresis, reversion-PCR and re-sequencing) first developed in the paper F?ldes-Papp et al. (2001) and in this paper. This methodology was then used by other groups within the whole sequencing project.     

A binary Cy3 aptamer probe composed of folded modules

Aptamers are short single-stranded DNA or RNA sequences that are selected in vitro based on their high affinity to a target molecule. Dye-binding aptamers are promising tools for real-time detection of not only DNA or RNA sequences but also proteins of interest both in vitro and in vivo. In this study, we aimed to isolate an RNA aptamer to Cy3, a widely used, membrane-permeant, and nontoxic fluorescent cyanine dye. Extensive selection of affinity RNA molecules to Cy3 yielded a unique sequence aptamer named Cy3_apt. The selected Cy3_apt was 83 nucleotides long and successfully shortened to 49 nucleotides long with increased affinity to Cy3 by multiple base changes. The shortest Cy3_apt is composed of two separate hairpin modules that are required for the affinity to Cy3 as monitored by the surface plasmon resonance (SPR) assay. Also, the fluorescence of Cy3 increased on binding to Cy3_apt. The two modules of Cy3_apt, when detached from each other, functioned as a binary aptamer probe. We demonstrate that the binary Cy3_apt probe is applicable to the detection of target oligonucleotides or RNA-RNA interaction by tagging with target sequences. This binary probe consists of two folded modules, referred to as a folded binary probe.     

Fluorescence spectral properties of cyanine dye labeled DNA near metallic silver particles

Recent studies have demonstrated that silver metallic particles can increase the quantum yield and decrease the lifetimes of nearby fluorophores. These studies are extended to double stranded DNA oligomers labeled with N,N'-(dipropyl)-tetramethylindocarbocyanine (Cy3) or N,N-(dipropyl)-tetramethylindodicarbocyanine (Cy5). The proximity to silver particles increases the apparent quantum yields and decreases the lifetimes of the double helical DNA 23-mer labeled individually with Cy3 or Cy5. The decreased lifetimes are accompanied by apparently increased photostability of the labeled oligomers near silver particles. Because of spatial averaging across the sample these results are likely to significantly underestimate the effects of silver particles on labeled DNA localized at an optimal distance from the metallic surface. These results suggest that DNA arrays fabricated on substrates with silver particles can display increased sensitivity and photostability in the analysis of gene expression.     

Increasing the sensitivity of DNA microarrays by metal-enhanced fluorescence using surface-bound silver nanoparticles

The effects of metal-enhanced fluorescence (MEF) have been measured for two dyes commonly used in DNA microarrays, Cy3 and Cy5. Silver island films (SIFs) grown on glass microscope slides were used as substrates for MEF DNA arrays. We examined MEF by spotting biotinylated, singly-labeled 23 bp DNAs onto avidin-coated SIF substrates. The fluorescence enhancement was found to be dependent on the DNA spotting concentration: below ~12.5 μM, MEF increased linearly, and at higher concentrations MEF remained at a constant maximum of 28-fold for Cy5 and 4-fold for Cy3, compared to avidin-coated glass substrates. Hybridization of singly-labeled oligonucleotides to arrayed single-stranded probes showed lower maximal MEF factors of 10-fold for Cy5 and 2.5-fold for Cy3, because of the smaller amount of immobilized fluorophores as a result of reduced surface hybridization efficiencies. We discuss how MEF can be used to increase the sensitivity of DNA arrays, especially for far red emitting fluorophores like Cy5, without significantly altering current microarray protocols.     

Structures of an Apo and a Binary Complex of an Evolved Archeal B Family DNA Polymerase Capable of Synthesising Highly Cy-Dye Labelled DNA

Thermophilic DNA polymerases of the polB family are of great importance in biotechnological applications including high-fidelity PCR. Of particular interest is the relative promiscuity of engineered versions of the exo- form of polymerases from the Thermo- and Pyrococcales families towards non-canonical substrates, which enables key advances in Next-generation sequencing. Despite this there is a paucity of structural information to guide further engineering of this group of polymerases. Here we report two structures, of the apo form and of a binary complex of a previously described variant (E10) of Pyrococcus furiosus (Pfu) polymerase with an ability to fully replace dCTP with Cyanine dye-labeled dCTP (Cy3-dCTP or Cy5-dCTP) in PCR and synthesise highly fluorescent “CyDNA” densely decorated with cyanine dye heterocycles. The apo form of Pfu-E10 closely matches reported apo form structures of wild-type Pfu. In contrast, the binary complex (in the replicative state with a duplex DNA oligonucleotide) reveals a closing movement of the thumb domain, increasing the contact surface with the nascent DNA duplex strand. Modelling based on the binary complex suggests how bulky fluorophores may be accommodated during processive synthesis and has aided the identification of residues important for the synthesis of unnatural nucleic acid polymers.     

Location of cyanine-3 on double-stranded DNA: importance for fluorescence resonance energy transfer studies

Fluorescence resonance energy transfer provides valuable long-range distance information about macromolecules in solution. Fluorescein and Cy3 are an important donor-acceptor pair of fluorophores; the characteristic F?rster length for this pair on DNA is 56 A, so the pair can be used to study relatively long distances. Measurement of FRET efficiency for a series of DNA duplexes terminally labeled with fluorescein and Cy3 suggests that the Cy3 is close to the helical axis of the DNA. An NMR analysis of a self-complementary DNA duplex 5'-labeled with Cy3 shows that the fluorophore is stacked onto the end of the helix, in a manner similar to that of an additional base pair. This provides a known point from which distances calculated from FRET measurements are measured. Using the FRET efficiencies for the series of DNA duplexes as restraints, we have determined an effective position for the fluorescein, which is maximally extended laterally from the helix. The knowledge of the fluorophore positions can now be used for more precise interpretation of FRET data from nucleic acids.