The crystal structure of yeast thiamin pyrophosphokinase.

BACKGROUND: Thiamin pyrophosphokinase (TPK) catalyzes the transfer of a pyrophosphate group from ATP to vitamin B1 (thiamin) to form the coenzyme thiamin pyrophosphate (TPP). Thus, TPK is important for the formation of a coenzyme required for central metabolic functions. TPK has no sequence homologs in the PDB and functions by an unknown mechanism. The TPK structure has been determined as a significant step toward elucidating its catalytic action. RESULTS: The crystal structure of Saccharomyces cerevisiae TPK complexed with thiamin has been determined at 1.8 A resolution. TPK is a homodimer, and each subunit consists of two domains. One domain resembles a Rossman fold with four alpha helices on each side of a 6 strand parallel beta sheet. The other domain has one 4 strand and one 6 strand antiparallel beta sheet, which form a flattened sandwich structure containing a jelly-roll topology. The active site is located in a cleft at the dimer interface and is formed from residues from domains of both subunits. The TPK dimer contains two compound active sites at the subunit interface. CONCLUSIONS: The structure of TPK with one substrate bound identifies the location of the thiamin binding site and probable catalytic residues. The structure also suggests a likely binding site for ATP. These findings are further supported by TPK sequence homologies. Although possessing no significant sequence homology with other pyrophospokinases, thiamin pyrophosphokinase may operate by a mechanism of pyrophosphoryl transfer similar to those described for pyrophosphokinases functioning in nucleotide biosynthesis.     

Three-dimensional structure of thymidine phosphorylase from Escherichia coli at 2.8 A resolution

The three-dimensional structure of thymidine phosphorylase from Escherichia coli has been determined at 2.8 A resolution using multiple-isomorphous-replacement techniques. The amino acid sequence deduced from the deoA DNA sequence is also reported. Thymidine phosphorylase exists in the crystal as an S-shaped dimer in which the subunits are related by a crystallographic 2-fold axis. Each subunit is composed of a small alpha-helical domain of six helices and a large alpha/beta domain. The alpha/beta domain includes a six-stranded mixed beta-sheet and a four-stranded antiparallel beta-sheet. The active site has been identified by difference Fourier analyses of the binding of thymine and thymidine and lies in a cavity between the small and large domains. The central beta-sheet is splayed open to accommodate a putative phosphate-binding site which is probably occupied by a sulfate ion in the crystal.     

The structure of yeast enolase at 2.25-A resolution. An 8-fold beta + alpha-barrel with a novel beta beta alpha alpha (beta alpha)6 topology

The three-dimensional structure of yeast enolase has been determined by the multiple isomorphous replacement method followed by the solvent flattening technique. A polypeptide model, corresponding with the known amino acid sequence, has been fitted to the electron density map. Crystallographic restrained least-squares refinement of the model without solvent gave R = 20.0% for 6-2.25-A resolution with good geometry. A model with 182 water molecules and 1 sulfate which is still being refined has presently R = 17.0%. The molecule is a dimer with subunits related by 2-fold crystallographic symmetry. The subunit has dimensions 60 X 55 X 45 A and is built from two domains. The smaller N-terminal domain has an alpha + beta structure based on a three-stranded antiparallel meander and four helices. The main domain is an 8-fold beta + alpha-barrel. The enolase barrel is, however, different from the triose phosphate isomerase barrel; its topology is beta beta alpha alpha (beta alpha)6 rather than (beta alpha)8 as found in triose phosphate isomerase. The inner beta-barrel is not entirely parallel, the second strand is antiparallel to the other strands, and the direction of the first helix is also reversed with respect to the other helices. This supports the hypothesis that some enzymes evolved independently producing the stable structure of beta alpha barrels with either enolase or triose phosphate isomerase topology. The active site of enolase is located at the carboxylic end of the barrel. A fragment of the N-terminal domain and two long loops protruding from the barrel domain form a wide crevice leading to the active site region. Asp246, Glu295, and Asp320 are the ligands of the conformational cation. Other residues in the active site region are Glu168, Asp321, Lys345, and Lys396.     

Three-dimensional structure of a barley beta-D-glucan exohydrolase, a family 3 glycosyl hydrolase.

BACKGROUND: Cell walls of the starchy endosperm and young vegetative tissues of barley (Hordeum vulgare) contain high levels of (1-->3,1-->4)-beta-D-glucans. The (1-->3,1-->4)-beta-D-glucans are hydrolysed during wall degradation in germinated grain and during wall loosening in elongating coleoptiles. These key processes of plant development are mediated by several polysaccharide endohydrolases and exohydrolases. RESULTS:. The three-dimensional structure of barley beta-D-glucan exohydrolase isoenzyme ExoI has been determined by X-ray crystallography. This is the first reported structure of a family 3 glycosyl hydrolase. The enzyme is a two-domain, globular protein of 605 amino acid residues and is N-glycosylated at three sites. The first 357 residues constitute an (alpha/beta)8 TIM-barrel domain. The second domain consists of residues 374-559 arranged in a six-stranded beta sandwich, which contains a beta sheet of five parallel beta strands and one antiparallel beta strand, with three alpha helices on either side of the sheet. A glucose moiety is observed in a pocket at the interface of the two domains, where Asp285 and Glu491 are believed to be involved in catalysis. CONCLUSIONS: The pocket at the interface of the two domains is probably the active site of the enzyme. Because amino acid residues that line this active-site pocket arise from both domains, activity could be regulated through the spatial disposition of the domains. Furthermore, there are sites on the second domain that may bind carbohydrate, as suggested by previously published kinetic data indicating that, in addition to the catalytic site, the enzyme has a second binding site specific for (1-->3, 1-->4)-beta-D-glucans.     

Three dimensional structure of porcine pancreatic alpha-amylase at 2.9 A resolution. Role of calcium in structure and activity.

The crystal structure of porcine pancreatic alpha-amylase (PPA) has been solved at 2.9 A resolution by X-ray crystallographic methods. The enzyme contains three domains. The larger, in the N-terminal part, consists of 330 amino acid residues. This central domain has the typical parallel-stranded alpha-beta barrel structure (alpha beta)8, already found in a number of other enzymes like triose phosphate isomerase and pyruvate kinase. The C-terminal domain forms a distinct globular unit where the chain folds into an eight-stranded antiparallel beta-barrel. The third domain lies between a beta-strand and a alpha-helix of the central domain, in a position similar to those found for domain B in triose phosphate isomerase and pyruvate kinase. It is essentially composed of antiparallel beta-sheets. The active site is located in a cleft within the N-terminal central domain, at the carboxy-end of the beta-strands of the (alpha beta)8 barrel. Binding of various substrate analogues to the enzyme suggests that the amino acid residues involved in the catalytic reaction are a pair of aspartic acids. A number of other residues surround the substrate and seem to participate in its binding via hydrogen bonds and hydrophobic interactions. The 'essential' calcium ion has been located near the active site region and between two domains, each of them providing two calcium ligands. On the basis of sequence comparisons this calcium binding site is suggested to be a common structural feature of all alpha-amylases. It represents a new type of calcium-protein interaction pattern.(ABSTRACT TRUNCATED AT 250 WORDS)     

Refined crystal structure of beta-lactamase from Staphylococcus aureus PC1 at 2.0 A resolution

The crystal structure of a class A beta-lactamase from Staphylococcus aureus PC1 has been refined at 2.0 A resolution. The resulting crystallographic R-factor (R = sigma h parallel Fo[-]Fc parallel/sigma h[Fo], where [Fo] and [Fc] are the observed and calculated structure factor amplitudes, respectively), is 0.163 for the 17,547 reflections with I greater than or equal to 2 sigma (I) within the 8.0 A to 2.0 A resolution range. The molecule consists of two closely associated domains. One domain is formed by a five-stranded antiparallel beta-sheet with three helices packing against a face of the sheet. The second domain is formed mostly by helices that pack against the second face of the sheet. The active site is located in the interface between the two domains, and many of the residues that form it are conserved in all known sequences of class A beta-lactamases. Similar to the serine proteases, an oxyanion hole is implicated in catalysis. It is formed by two main-chain nitrogen atoms, that of the catalytic seryl residue, Ser70, and that of Gln237 on an edge beta-strand of the major beta-sheet. Ser70 is interacting with another conserved seryl residue, Ser130, located between the two ammonium groups of the functionally important lysine residues, Lys73 and Lys234. Such intricate interactions point to a possible catalytic role for this second seryl residue. Another key catalytic residue is Glu166. There are several unusual structural features associated with the active site. (1) A cis peptide bond has been identified between the catalytic Glu166 and Ile167. (2) Ala69 and Leu220 have strained phi, psi dihedral angles making close contacts that restrict the conformation of the active site beta-strand involved in the formation of the oxyanion hole. (3) A buried aspartate residue, the conserved Asp233, is located next to the active site Lys234. It is interacting with another buried aspartyl residue, Asp246. An internal solvent molecule is also involved, but the rest of its interactions with the protein indicate it is not a cation. (4) Another conserved aspartyl residue that is desolvated is Asp131, adjacent to Ser130. Its charge is stabilized by interactions with four main-chain nitrogen atoms. (5) An internal cavity underneath the active site depression is filled with six solvent molecules. This, and an adjacent cavity occupied by three solvent molecules partially separate the omega-loop associated with the active site from the rest of the protein.(ABSTRACT TRUNCATED AT 250 WORDS)     

Three-dimensional structure of the tryptophan synthase alpha 2 beta 2 multienzyme complex from Salmonella typhimurium

The three-dimensional structure of the alpha 2 beta 2 complex of tryptophan synthase from Salmonella typhimurium has been determined by x-ray crystallography at 2.5 A resolution. The four polypeptide chains are arranged nearly linearly in an alpha beta beta alpha order forming a complex 150 A long. The overall polypeptide fold of the smaller alpha subunit, which cleaves indole glycerol phosphate, is that of an 8-fold alpha/beta barrel. The alpha subunit active site has been located by difference Fourier analysis of the binding of indole propanol phosphate, a competitive inhibitor of the alpha subunit and a close structural analog of the natural substrate. The larger pyridoxal phosphate-dependent beta subunit contains two domains of nearly equal size, folded into similar helix/sheet/helix structures. The binding site for the coenzyme pyridoxal phosphate lies deep within the interface between the two beta subunit domains. The active sites of neighboring alpha and beta subunits are separated by a distance of about 25 A. A tunnel with a diameter matching that of the intermediate substrate indole connects these active sites. The tunnel is believed to facilitate the diffusion of indole from its point of production in the alpha subunit active site to the site of tryptophan synthesis in the beta active site and thereby prevent its escape to the solvent during catalysis.     

Three-dimensional structure of cyclodextrin glycosyltransferase from Bacillus circulans at 3.4 A resolution

Cyclodextrin glycosyltransferase (EC 2.4.1.19) from Bacillus circulans has been purified, crystallized and analyzed by X-ray diffraction. The enzyme is monomeric. SDS/polyacrylamide gel electrophoresis gave an Mr of 73,600(+/- 1000), corresponding to 670(+/- 10) amino acid residues. The structure of the crystalline enzyme has been elucidated at a resolution of 3.4 A, using multiple isomorphous replacement and solvent flattening for phase determination. The resulting electron density map allowed tracing of the polypeptide chain; 664 residue positions have been assigned. The chain fold has been subdivided into five domains. The N-terminal domain forms a (beta alpha)8-barrel, which contains the second domain of about 55 residues as an insert after the third beta-strand. The three remaining domains form almost exclusively beta-pleated sheet structures and consist of about 90, 80 and 95 residues. The chain fold of the three N-terminal domains of 492 residues resembles closely the two known structures of alpha-amylases. This geometric similarity corresponds to the observed amino acid sequence homology. On the basis of the sequence homology with alpha-amylases, the active center can be located. The fourth domain has an immunoglobulin fold and is far away from the active center, while the fifth domain participates in the formation of the broad depression at the active center. Accordingly, the cyclodextrin glycosyltransferase chain fold can be considered as an alpha-amylase chain fold with two additional domains.     

Crystal structure of the N-terminal domain of MukB: a protein involved in chromosome partitioning.

BACKGROUND: The 170 kDa protein MukB has been implicated in ATP-dependent chromosome partitioning during cell division in Escherichia coli. MukB shares its dimeric structure and domain architecture with the ubiquitous family of SMC (structural maintenance of chromosomes) proteins that facilitate similar functions. The N-terminal domain of MukB carries a putative Walker A nucleotide-binding region and the C-terminal domain has been shown to bind to DNA. Mutant phenotypes and a domain arrangement similar to motor proteins that move on microtubules led to the suggestion that MukB might be a motor protein acting on DNA. RESULTS: We have cloned, overexpressed and crystallized a 26 kDa protein consisting of 227 N-terminal residues of MukB from E. coli. The structure has been solved using multiple anomalous dispersion and has been refined to 2.2 A resolution. The N-terminal domain of MukB has a mixed alpha/beta fold with a central six-stranded antiparallel beta sheet. The putative nucleotide-binding loop, which is part of an unexpected helix-loop-helix motif, is exposed on the surface and no nucleotide-binding pocket could be detected. CONCLUSIONS: The N-terminal domain of MukB has no similarity to the kinesin family of motor proteins or to any other nucleotide-binding protein. Together with the finding of the exposed Walker A motif this observation supports a model in which the N- and C-terminal domains come together in the dimer of MukB to form the active site. Conserved residues on one side of the molecule delineate a region of the N-terminal domain that is likely to interact with the C-terminal domain.     

Three-dimensional solution structure of the src homology 2 domain of c-abl.

SH2 regions are protein motifs capable of binding target protein sequences that contain a phosphotyrosine. The solution structure of the abl SH2 product, a protein of 109 residues and 12.1 kd, has been determined by multidimensional nuclear magnetic resonance spectroscopy. It is a compact spherical domain with a pair of three-stranded antiparallel beta sheets and a C-terminal alpha helix enclosing the hydrophobic core. Three arginines project from a short N-terminal alpha helix and one beta sheet into the putative phosphotyrosine-binding site, which lies on a face distal from the termini. Comparison with other SH2 sequences supports a common global fold and mode of phosphotyrosine binding for this family.     

Gelsolin domains 4-6 in active,actin-free conformation identifies sites of regulatory calcium ions

Structural analysis of gelsolin domains 4-6 demonstrates that the two highest-affinity calcium ions that activate the molecule are in domains 5 and 6, one in each. An additional calcium site in domain 4 depends on subsequent actin binding and is seen only in the complex. The uncomplexed structure is primed to bind actin. Since the disposition of the three domains is similar in different crystal environments, either free or in complex with actin, the conformation in calcium is intrinsic to active gelsolin itself. Thus the actin-free structure shows that the structure with an actin monomer is a good model for an actin filament cap. The last 13 residues of domain 6 have been proposed to be a calcium-activated latch that, in the inhibited form only, links two halves of gelsolin. Comparison with the active structure shows that loosening of the latch contributes but is not central to activation. Calcium binding in domain 6 invokes a cascade of swapped ion-pairs. A basic residue swaps acidic binding partners to stabilise a straightened form of a helix that is kinked in inhibited gelsolin. The other end of the helix is connected by a loop to an edge beta-strand. In active gelsolin, an acidic residue in this helix breaks with its loop partner to form a new intrahelical ion-pairing, resulting in the breakage of the continuous sheet between domains 4 and 6, which is central to the inhibited conformation. A structural alignment of domain sequences provides a rationale to understand why the two calcium sites found here have the highest affinity amongst the five different candidate sites found in other gelsolin structures.     

Solution structure of the SEA domain from the murine homologue of ovarian cancer antigen CA125 (MUC16)

Human CA125, encoded by the MUC16 gene, is an ovarian cancer antigen widely used for a serum assay. Its extracellular region consists of tandem repeats of SEA domains. In this study we determined the three-dimensional structure of the SEA domain from the murine MUC16 homologue using multidimensional NMR spectroscopy. The domain forms a unique alpha/beta sandwich fold composed of two alpha helices and four antiparallel beta strands and has a characteristic turn named the TY-turn between alpha1 and alpha2. The internal mobility of the main chain is low throughout the domain. The residues that form the hydrophobic core and the TY-turn are fully conserved in all SEA domain sequences, indicating that the fold is common in the family. Interestingly, no other residues are conserved throughout the family. Thus, the sequence alignment of the SEA domain family was refined on the basis of the three-dimensional structure, which allowed us to classify the SEA domains into several subfamilies. The residues on the surface differ between these subfamilies, suggesting that each subfamily has a different function. In the MUC16 SEA domains, the conserved surface residues, Asn-10, Thr-12, Arg-63, Asp-75, Asp-112, Ser-115, and Phe-117, are clustered on the beta sheet surface, which may be functionally important. The putative epitope (residues 58-77) for anti-MUC16 antibodies is located around the beta2 and beta3 strands. On the other hand the tissue tumor marker MUC1 has a SEA domain belonging to another subfamily, and its GSVVV motif for proteolytic cleavage is located in the short loop connecting beta2 and beta3.     

Crystal structure of histidyl-tRNA synthetase from Escherichia coli complexed with histidyl-adenylate.

The crystal structure at 2.6 A of the histidyl-tRNA synthetase from Escherichia coli complexed with histidyl-adenylate has been determined. The enzyme is a homodimer with a molecular weight of 94 kDa and belongs to the class II of aminoacyl-tRNA synthetases (aaRS). The asymmetric unit is composed of two homodimers. Each monomer consists of two domains. The N-terminal catalytic core domain contains a six-stranded antiparallel beta-sheet sitting on two alpha-helices, which can be superposed with the catalytic domains of yeast AspRS, and GlyRS and SerRS from Thermus thermophilus with a root-mean-square difference on the C alpha atoms of 1.7-1.9 A. The active sites of all four monomers are occupied by histidyl-adenylate, which apparently forms during crystallization. The 100 residue C-terminal alpha/beta domain resembles half of a beta-barrel, and provides an independent domain oriented to contact the anticodon stem and part of the anticodon loop of tRNA(His). The modular domain organization of histidyl-tRNA synthetase reiterates a repeated theme in aaRS, and its structure should provide insight into the ability of certain aaRS to aminoacylate minihelices and other non-tRNA molecules.     

Structure of a novel N-acetyl-L-citrulline deacetylase from Xanthomonas campestris

The structure of a novel acetylcitrulline deacetylase from the plant pathogen Xanthomonas campestris has been solved by multiple-wavelength anomalous dispersion (MAD) using crystals grown from selenomethionine-substituted protein and refined at 1.75 A resolution. The asymmetric unit of the crystal contains one monomer consisting of two domains, a catalytic domain and a dimerization domain. The catalytic domain is able to bind a single Co(II) ion at the active site with no change in conformation. The dimerization domain forms an interface between two monomers related by a crystallographic two-fold symmetry axis. The interface is maintained by hydrophobic interactions between helices and hydrogen bonding between two beta strands that form a continuous beta sheet across the dimer interface. Because the dimers are also related by two-fold crystallographic axes, they pack together across the crystal via the dimerization domain, suggesting that higher order oligomers may form in solution. The polypeptide fold of the monomer is similar to the fold of Pseudomonas sp. carboxypeptidase G2 and Neisseria meningitidis succinyl diaminopimelate desuccinylase. Structural comparison among these enzymes allowed modeling of substrate binding and suggests a possible catalytic mechanism, in which Glu130 functions as a bifunctional general acid-base catalyst and the metal ion polarizes the carbonyl of the acetyl group.     

Crystal structure of cholesterol oxidase from Brevibacterium sterolicum refined at 1.8 A resolution

Cholesterol oxidase (3 beta-hydroxysteroid oxidase, EC 1.1.3.6) is an FAD-dependent enzyme that carries out the oxidation and isomerization of steroids with a trans A : B ring junction. The crystal structure of the enzyme from Brevibacterium sterolicum has been determined using the method of isomorphous replacement and refined to 1.8 A resolution. The refined model includes 492 amino acid residues, the FAD prosthetic group and 453 solvent molecules. The crystallographic R-factor is 15.3% for all reflections between 10.0 A and 1.8 A resolution. The structure is made up of two domains: an FAD-binding domain and a steroid-binding domain. The FAD-binding domain consists of three non-continuous segments of sequence, including both the N terminus and the C terminus, and is made up of a six-stranded beta-sheet sandwiched between a four-stranded beta-sheet and three alpha-helices. The overall topology of this domain is very similar to other FAD-binding proteins. The steroid-binding domain consists of two non-continuous segments of sequence and contains a six-stranded antiparallel beta-sheet forming the "roof" of the active-site cavity. This large beta-sheet structure and the connections between the strands are topologically similar to the substrate-binding domain of the FAD-binding protein para-hydroxybenzoate hydroxylase. The active site lies at the interface of the two domains, in a large cavity filled with a well-ordered lattice of 13 solvent molecules. The flavin ring system of FAD lies on the "floor" of the cavity with N-5 of the ring system exposed. The ring system is twisted from a planar conformation by an angle of approximately 17 degrees, allowing hydrogen-bond interactions between the protein and the pyrimidine ring of FAD. The amino acid residues that line the active site are predominantly hydrophobic along the side of the cavity nearest the benzene ring of the flavin ring system, and are more hydrophilic on the opposite side near the pyrimidine ring. The cavity is buried inside the protein molecule, but three hydrophobic loops at the surface of the molecule show relatively high temperature factors, suggesting a flexible region that may form a possible path by which the substrate could enter the cavity. The active-site cavity contains one charged residue, Glu361, for which the side-chain electron density suggests a high degree of mobility for the side-chain. This residue is appropriately positioned to act as the proton acceptor in the proposed mechanism for the isomerization step.     

The crystal structure of muscle phosphoglucomutase refined at 2.7-angstrom resolution.

A model of rabbit muscle phosphoglucomutase was refined at 2.7-A resolution by using two heavy atom derivatives for initial phasing and standard refinement procedures, including molecular replacement averaging about a 2-fold axis and dynamic simulation: final R-factor, 0.223 (no solvent modeling); RMS deviation from standard bond lengths and angles, 0.020 A and 3.6 degrees, respectively (all 8658 nonhydrogen atoms plus 36,953 reflections (F/sigma greater than or equal to 3) between 8- and 2.7-A resolutions); average of individually refined atomic B-factors, 40 A2 (all atoms) and 30 A2 (all atoms in domains I-III). An H-bonding scheme with 538 main chain H-bonds for the two monomers in the asymmetric unit and probable ligands for six uranyl ions in one heavy atom derivative is given. The monomer contains 42 strands/helices arranged into four alpha/beta-domains. Each of the first three domains contains an alpha 3 beta 4 alpha 1 motif, where the topology of beta 4 is 2,1,3,4:[arrows: see text] which is a topology not encountered in an extensive search among known protein structures. A spatial similarity is observed between corresponding residues in the three repetitions of this motif per monomer, but the minimal mutational distance between spatially corresponding residues is not statistically significant. The loop between the antiparallel strands in each of these domains is an important feature of the active site. In domain IV, beta-sheet topology is 2,1,3,4,5,6:[arrows:see text]. Noncovalent domain/domain interactions within the monomer are greatest between adjacent domains along the polypeptide chain, which are not substantially interdigitated and can be cleanly disengaged by altering the phi/psi torsional angles of three uniquely positioned residues in the model. The observed hierarchy of noncovalent interactions between structural units within the crystal, based on a semi-empirical paradigm, suggests that monomer-monomer contacts within the asymmetric unit are formed during growth of the lattice and provides a rationale for some of the diffraction characteristics of phosphoglucomutase crystals. An unusually deep crevice involving 58 residues is formed by the head-to-tail, twisted semicircular arrangement of the four domains of the monomer that places no atom more than 12 A from the water-accessible surface. The active site of the enzyme is extensively buried at the bottom of this crevice, at the approximate confluence of the four domains. Other features of the active site, including the surrounding helical dipoles, and the metal-ion binding pocket are described, together with structure/function comparisons with a number of other enzymes.     

Crystal structure of Streptococcus mutans pyrophosphatase: a new fold for an old mechanism

BACKGROUND: Streptococcus mutans pyrophosphatase (Sm-PPase) is a member of a relatively uncommon but widely dispersed sequence family (family II) of inorganic pyrophosphatases. A structure will answer two main questions: is it structurally similar to the family I PPases, and is the mechanism similar? RESULTS: The first family II PPase structure, that of homodimeric Sm-PPase complexed with metal and sulfate ions, has been solved by X-ray crystallography at 2.2 A resolution. The tertiary fold of Sm-PPase consists of a 189 residue alpha/beta N-terminal domain and a 114 residue mixed beta sheet C-terminal domain and bears no resemblance to family I PPase, even though the arrangement of active site ligands and the residues that bind them shows significant similarity. The preference for Mn2+ over Mg2+ in family II PPases is explained by the histidine ligands and bidentate carboxylate coordination. The active site is located at the domain interface. The C-terminal domain is hinged to the N-terminal domain and exists in both closed and open conformations. CONCLUSIONS: The active site similiarities, including a water coordinated to two metal ions, suggest that the family II PPase mechanism is "analogous" (not "homologous") to that of family I PPases. This is a remarkable example of convergent evolution. The large change in C-terminal conformation suggests that domain closure might be the mechanism by which Sm-PPase achieves specificity for pyrophosphate over other polyphosphates.     

NMR solution structure of the acylphosphatase from Escherichia coli

The solution structure of Escherichia coli acylphosphatase (E. coli AcP), a small enzyme catalyzing the hydrolysis of acylphosphates, was determined by (1)H and (15)N NMR and restrained modelling calculation. In analogy with the other members of AcP family, E. coli AcP shows an alpha/beta sandwich domain composed of four antiparallel and one parallel beta-strand, assembled in a five-stranded beta-sheet facing two antiparallel alpha-helices. The pairwise RMSD values calculated for the backbone atoms of E. coli and Sulfolobus solfataricus AcP, Bovine common type AcP and Horse muscle AcP are 2.18, 5.31 and 5.12 A, respectively. No significant differences are present in the active site region and the catalytic residue side chains are consistently positioned in the structures.     

Crystal structure of 1-deoxy-d-xylulose-5-phosphate reductoisomerase from Zymomonas mobilis at 1.9-A resolution

1-Deoxy-d-xylulose-5-phosphate reductoisomerase (DXR) is the second enzyme in the non-mevalonate pathway of isoprenoid biosynthesis. The structure of the apo-form of this enzyme from Zymomonas mobilis has been solved and refined to 1.9-A resolution, and that of a binary complex with the co-substrate NADPH to 2.7-A resolution. The subunit of DXR consists of three domains. Residues 1-150 form the NADPH binding domain, which is a variant of the typical dinucleotide-binding fold. The second domain comprises a four-stranded mixed beta-sheet, with three helices flanking the sheet. Most of the putative active site residues are located on this domain. The C-terminal domain (residues 300-386) folds into a four-helix bundle. In solution and in the crystal, the enzyme forms a homo-dimer. The interface between the two monomers is formed predominantly by extension of the sheet in the second domain. The adenosine phosphate moiety of NADPH binds to the nucleotide-binding fold in the canonical way. The adenine ring interacts with the loop after beta1 and with the loops between alpha2 and beta2 and alpha5 and beta5. The nicotinamide ring is disordered in crystals of this binary complex. Comparisons to Escherichia coli DXR show that the two enzymes are very similar in structure, and that the active site architecture is highly conserved. However, there are differences in the recognition of the adenine ring of NADPH in the two enzymes.