Effective extracellular production of Bacillus stearothermophilus esterase by pH-stat modal fed-batch culture of recombinant Bacillus brevis

An automated two-component substrate feeding strategy with a pH-stat modal fed-batch culture using a high pH limit was developed to effectively porduce esterase from a hyperprotein exreting Bacillus brevis HPD31 harboring a plasmid pHSC131 which carries a Bacillus stearothermo philus esterase gene. First, the effect of single- and multi-substrate feedings on the growth and activity of the excreted esterase was investigated. Then a two-component (polypepton + glucose) feeding using different feed rates was studied. Highest activity of the excreted esterase (34 U/mL) was obtained when the concentrations of poly-pepton and glucose in the nutrient feed solution were 250 and 41.60 g/L respectively. The absence and excessive amount of glucose in the nutrient feed solution was ineffective for the exracellular esterase formation because without glucose the increase in cell concentration was minimum while excessive amount of glucose favored cell growth at the expense of the esterase production. It is believed that the mechanism of enzyme excretion is growth dependent and that a higher cell growth of the host is in effect unfavorable for the enzyme production. The feed rate, automatically controlled by the direct signal of the pH change, at 0.30 mL/pulse was found optimum for the esterase production while lower (0.15 mL/pulse) and higher (0.67 mL/pulse) feed rates did not produce good results. The activity of the excreted esterase was increased more than eight times from 4 U/mL obtained in the conventional batch culture to 34 U/mL obtained in this study. The esterase productivity was likewise increased more than threefold. (c) 1992 John Wiley & Sons, Inc.     

Extracellular esterase activity from Bacillus stearothermophilus

Bacillus stearothermophilus has been reported to produce an extracellular esterase with molecular weight of 42–47 kDa. Extracellular esterase activity in Bacillus stearothermophilus (NCIB 13335) was found to reside in protein with a molecular weight less than 10 kDa. This small esterase was responsible for all the esterase activity observed in this strain under the conditions studied.     

枯草芽胞杆菌乙酰木聚糖酯酶的鉴定及诱导剂对酯酶活力的影响

以枯草芽胞杆菌CICC 20034为研究对象,对其分泌的高相对分子质量酯酶进行鉴定,并考察诱导剂对其活力的影响。结果表明:枯草芽胞杆菌CICC 20034可分泌一种相对分子质量为1.07×105的酯酶,经蛋白质质谱鉴定为乙酰木聚糖酯酶,单体分相对子质量为3.56×104。在发酵培养基中添加乙酸乙酯和木糖可以显著的促进乙酰木聚糖酯酶的活力,而三丁酸甘油酯和大分子诱导剂——木聚糖、玉米芯粉和壳聚糖对酯酶的活力几乎无促进作用。枯草芽胞杆菌CICC 20034以乙酸乙酯为诱导剂时最高比酶活为0.62 U/mL,为已知报道的野生细菌乙酰木聚糖酯酶的最高酯酶活力。     

Molecular cloning of a thermostable neutral protease gene from Bacillus stearothermophilus in a vector plasmid and its expression in Bacillus stearothermophilus and Bacillus subtilis.

The structural gene for a thermostable protease from Bacillus stearothermophilus was cloned in plasmid pTB90. It is expressed in both B. stearothermophilus and Bacillus subtilis. B. stearothermophilus carrying the recombinant plasmid produced about 15-fold more protease (310 U/mg of cell dry weight) than did the wild-type strain of B. stearothermophilus. Some properties of the proteases that have been purified from the transformants of B. stearothermophilus and B. subtilis were examined. No significant difference was observed among the enzyme properties studied here despite the difference in host cells. We found that the protease, neutral in pH characteristics and with a molecular weight of 36,000, retained about 80% of its activity even after treatment of 65 degrees C for 30 min.     

Production and secretion of recombinant Leuconostoc mesenteroides dextransucrase DsrS in Bacillus megaterium

Leuconostoc mesenteroides dextransucrase DsrS was recombinantly produced in Bacillus megaterium and exported into the growth medium. For this purpose a plasmid-based xylose-inducible gene expression system was optimized via introduction of a multiple cloning site and an encoded optimal B. megaterium ribosome binding site. A cre mediating glucose-dependent catabolite repression was removed. Recombinant DsrS was found in the cytoplasm and exported via its native leader sequence into the growth medium. Elimination of the extracellular protease NprM increased extracellular DsrS concentrations by a factor of 4 and stabilized the recombinant protein for up to 12 h. Cultivation in a semi-defined medium resulted in a further doubling of extracellular DsrS concentration up to an activity of 65 Units/L. To develop an industrial process a high cell density cultivation of B. megaterium was established yielding cell dry weights of up to 80 g/L. After induction of dsrS expression high specific (362 Units/g) and volumetric (28,600 Units/L) activities of dextran free DsrS were measured. However, using high cell density cultivation, most DsrS was found cell-associated indicating current limitations of the production process. A protease accessibility assay identified the major limitation of DsrS production at the level of protein folding. Intracellular misfolding of DsrS hampered DsrS export via the SEC pathway at high cell densities. The subsequent use of a semi-defined mineral medium and the induction of DsrS production at lower cell densities increased protein export efficiency remarkably, but also led to extracellular DsrS aggregation. Further optimization strategies for the production of recombinant DsrS in B. megaterium are discussed.     

Secretory expression of thermostable T1 lipase through bacteriocin release protein

The extracellular production of T1 lipase was performed by co-expression of pJL3 vector encoding bacteriocin release protein in prokaryotic system. Secretory expression was optimized by considering several parameters, including host strains, inducer (IPTG) concentration, media, induction at A(600 nm), temperature, and time of induction. Among the host strains tested, Origami B excreted out 18,100 U/ml of lipase activity into culture medium when induced with 50 microM IPTG for 12 h. The Origami B harboring recombinant plasmid pGEX/T1S and pJL3 vector was chosen for further study. IPTG at 0.05 mM, YT medium, induction at A(600 nm) of 1.25, 30 degrees C, and 32 h of induction time were best condition for T1 lipase secretion with Origami B as a host.     

Construction of Bacillus thuringiensis wild-type S76 and Cry- derivatives expressing a green fluorescent protein: two potential marker organisms to study bacteria-plant interactions

Collectively, the species Bacillus thuringiensis, Bacillus cereus, and Bacillus anthracis represent microorganisms of high economic, medical, and biodefense importance. Although the genetic correlation and pathogenic characteristics have been extensively dissected, the ecological properties of these three species in their natural environments remain poorly understood. Thus, a tractable marker for detecting these bacteria under specific environmental and physiological conditions is a valuable tool. With this purpose, a plasmid (pAD43-25) carrying a functional gfp gene sequence (gfpmut3A) was introduced into the wild-type strain Bacillus thuringiensis subsp. kurstaki S76, which bears approximately 11 plasmids, allowing constitutive synthesis of green fluorescent protein (GFP) during vegetative growth (strain S76GFP+). Additionally, this vector was transferred to a plasmid-cured (Cry-) B. thuringiensis host. Bright green cells were detected by fluorescence microscopy in both recombinants by 2 h after inoculation in liquid medium and could be seen throughout the remaining cultivation time until complete sporulation was accomplished. For strain S76GFP+ protein profile and plasmid DNA analyses indicate, respectively, that this recombinant maintained Cry proteins expression and resident plasmid outline. Thus, in addition to the potential of strain S76GFP+ as a marker organism in bacteria-plant interaction studies, the production and stability of active GFPmut3a make this unique expression system a useful experimental model to study adaptive changes of host-plasmid as well as plasmid-plasmid relationships in a population of cells stressed by the production of a recombinant protein.     

High cell density culture of Yarrowia lipolytica using a one-step feeding process

Yarrowia lipolytica is a potentially useful host for heterologous protein production. To develop an efficient culture method for high cell density cultivation and heterologous gene expression of Y. lipolytica, the effects of medium components and their concentrations on the growth of Y. lipolytica have been investigated. Addition of yeast extract to the culture media was found to significantly reduce the long lag phase encountered when Y. lipolytica was cultivated in synthetic culture media containing high concentrations of glycerol. Therefore, by enriching with 0.3% yeast extract the synthetic culture medium containing 15% glycerol, we could cultivate Y. lipolytica up to 83 g/L dry cell weight in a batch culture. Furthermore, over 100 g/L and 88 units/mL of rice alpha-amylase activity were obtained in less than 50 h with a one-step feeding process in which a recombinant Y. lipolytica expressing rice alpha-amylase was cultivated in the 10% glycerol medium enriched with 0.3% yeast extract and fed only once with the concentrated feeding medium (60% glycerol). The easy cultivation of recombinant Y. lipolytica to a high cell density may strengthen its position as a host for heterologous protein production.     

Construction of an excretion vector and extracellular production of human growth hormone from Escherichia coli

A new excretion vector, pEAP8, was constructed to develop an excretion system for Escherichia coli. This plasmid, derived from pEAP37, carried the weakly activated kil gene of plasmid pMB9 [Kobayashi et al., J. Bacteriol. 166 (1986) 728-732] and the penicillinase promoter and signal region of an alkalophilic Bacillus sp. to excrete foreign gene products. A gene for human growth hormone (hGH) was joined to this signal sequence through the HindIII site. The recombinant plasmid p8hGH1 thus constructed, was introduced into E. coli. The hybrid protein which was produced in E. coli carrying p8hGH1 was processed during transport through the inner membrane, with the mature hGH being excreted into the medium through the outer membrane which was made permeable by the action of the kil gene. The N-terminal amino acid sequence and the biological activity of the extracellular hGH were consistent with those of the authentic hGH.     

Cloning and expression of a chitinase gene from Aeromonas hydrophila in Escherichia coli.

An extracellular secreted chitinase gene from Aeromonas hydrophila was cloned in Escherichia coli, and the gene product was detected in the culture medium. Like the natural chitinase protein, the excreted chitinase had a molecular weight of approximately 85,000 and was subject to catabolite repression by glucose.     

NK13中(S)- 酮基布洛芬拆分用酯酶基因的克隆及表达

以本实验室筛选出的一株具有不对称拆分消旋酮基布洛芬氯乙酯的菌株NK13为材料,经初步鉴定为巨大芽孢杆菌(Bacillus megaterium),通过构建其基因文库,从中筛选得到一阳性克隆重组子pUC-NK。测序分析表明,该重组子质粒中包含一长度为933bp的酯酶基因的完整开放阅读框,核苷酸同源性对比证明该酯酶基因属首次发现（GenBank登录号为DQ196347）,将此基因克隆到原核表达载体pET21b+中构建重组表达质粒pET-NKest,转化E.coli BL21,经IPTG诱导在宿主菌中得到表达,经SDS-PAGE电泳检测证明该酯酶蛋白分子量约为34KDa。薄层层析与HPLC检测结果显示,表达菌株的转化效率较原始菌有明显提高,由表达菌45min就能转化酮基布洛芬氯乙酯47.4％,而得到的(S)-酮基布洛芬过量（e.e.%）由野生菌NK13的5.84％提高到55.46％,提高将近10倍,说明该酯酶具有优先拆分得到(S)-酮基布洛芬的特性。     

磷脂酰丝氨酸合成酶基因的克隆及在枯草芽孢杆菌中的表达

应用 PCR技术从 Escherichia coli K12 Sgal- (ExPASy P23830) 中扩增到大小为 1350bp编码磷脂酰丝氨酸合成酶的 DNA片段,将其插入枯草芽孢杆菌诱导型表达载体 pBES,获得重组质粒 pBES-pss后转化 Bacillus subtilis DB104。经蔗糖诱导后,该磷脂酰丝氨酸合成酶在 Bacillus subtilis DB104 (pBES-pss)中获得胞外分泌表达,SDS-PAGE分析发现目的蛋白分子量约为 52kDa,酶联比色法检测酶活力为 1.50U/mL,提高了磷脂酰丝氨酸合成酶的表达产量,为工业化发酵生产磷脂酰丝氨酸合成酶奠定了良好的基础。     

Identification, sequence, and expression of the gene encoding gamma-glutamyltranspeptidase in Bacillus subtilis.

The Bacillus subtilis gene encoding gamma-glutamyltranspeptidase (GGT) activity encodes a protein of 587 amino acids having extensive homologies with other procaryotic GGTs. Inactivation of the gene abolished all measurable GGT activity, which in the wild type was found mainly to be excreted into the medium commencing at the end of vegetative growth.     

Production of recombinant L-leucine dehydrogenase from Bacillus cereus in pilot scale using the runaway replication system E. coli[pIET98

A method for the production of recombinant L-leucine dehydrogenase from Bacillus cereus in pilot scale is described employing the temperature induced runaway replication vector pIET98 and the Escherichia coli host strain BL21. Fed-batch cultivation using a semi-synthetic high-cell densitiy medium was adjusted in 5-L scale to yield a constant growth rate of 0,17 h(-1) and a final cell concentration of 27 g dry weight/L by exponentially increasing the nutrient supply. Runaway replication and thus, LeuDH expression was induced during the feeding phase by increasing the cultivation temperature to 41 degrees C yielding a specific enzyme activity of 110 U/mg, which corresponds to 30% of the soluble cell protein. The cultivation was terminated when the dissolved oxygen content fell below 10% saturation. The final volume activity was 600,000 U/L cultivation. No change in growth, cell density, or expression activity was observed scaling up the cultivation volume to 200 L. Thus, 120,000,000 units L-leucine dehydrogenase were obtained from one cultivation. The purification of L-leucine dehydrogenase to homogeneity was carried out by heat denaturation, liquid-liquid extraction, gel filtration, and anion-exchange chromatography to give pure enzyme in 65% yield. The integrity of the recombinant enzyme was tested measuring the molecular weight and determining the N-terminal amino acid sequence.     

Proteome-based identification of fusion partner for high-level extracellular production of recombinant proteins in Escherichia coli

Extracellular production of recombinant proteins in Escherichia coli has several advantages over cytoplasmic or periplasmic production. However, nonpathogenic laboratory strains of E. coli generally excrete only trace amounts of proteins into the culture medium under normal growth conditions. Here we report a systematic proteome-based approach for developing a system for high-level extracellular production of recombinant proteins in E. coli. First, we analyzed the extracellular proteome of an E. coli B strain, BL21(DE3), to identify naturally excreted proteins, assuming that these proteins may serve as potential fusion partners for the production of recombinant proteins in the medium. Next, overexpression and excretion studies were performed for the 20 selected fusion partners with molecular weights below 40 kDa. Twelve of them were found to allow fused proteins to excrete into the medium at considerable levels. The most efficient excreting fusion partner, OsmY, was used as a carrier protein to excrete heterologous proteins into the medium. E. coli alkaline phosphatase, Bacillus subtilis alpha-amylase, and human leptin used as model proteins could all be excreted into the medium at concentrations ranging from 5 to 64 mg/L during the flask cultivation. When only the signal peptide or the mature part of OsmY was used as a fusion partner, no such excretion was observed; this confirmed that these proteins were truly excreted rather than released by outer membrane leakage. The recombinant protein of interest could be recovered by cleaving off the fusion partner by enterokinase as demonstrated for alkaline phosphatase as an example. High cell density cultivation allowed production of these proteins to the levels of 250-700 mg/L in the culture medium, suggesting the good potential of this approach for the excretory production of recombinant proteins.     

Homologous sequences other than insertion elements can serve as recombination sites in plasmid drug resistance gene amplification.

A plasmid (pRR983) was constructed which has a gene coding for neomycin and kanamycin resistance flanked by direct repeats of regions of homology which contain no known insertion sequences. pRR983 does not have any homologous IS1 sequences. Growth of Proteus mirabilis harboring pRR983 in medium containing high concentration of neomycin resulted in cells which were highly resistant to both neomycin and kanamycin. Plasmid DNA was analyzed by using restriction endonucleases. In most cases the neomycin resistance gene had been tandemly duplicated by using the homologous DNA sequences flanking the resistance gene as recombination sites. This is analogous to tandem duplication of drug resistance genes on NR1 using the two direct repeats of IS1 as recombination sites. The amplified plasmid DNA returned to its original structure by the deletion of amplified neomycin resistance determinants when the host cells were cultured without selection for high resistance to neomycin.     

Proteome-based identification of signal peptides for improved secretion of recombinant cyclomaltodextrin glucanotransferase in Escherichia coli

Secretion of recombinant proteins in heterologous host has drawn attention for its simpler purification and downstream processes. Searching for secretion aid molecules to improve protein secretion can be done through synthetic biology, screening of genome data and proteome-based approach. In the present study, the extracellular proteome on starch-containing medium of Bacillus lehensis G1 was analyzed to identify naturally secreted proteins with signal peptide. A total of 87 protein spots were identified by mass spectrometry, which were categorized mostly in the metabolism of carbohydrates and related molecules (20%). Over-expression and secretion studies were performed for all the 14 selected signal peptides fused to a reporter protein, cyclomaltodextrin glucanotransferase (CGTase). All clones were found to allow CGTase to be excreted into the medium, as observed and measured from the iodine plate assay and enzyme activity assay. Compared to native signal peptide (G1) of CGTase, signal peptide of GlcNAc-binding protein A (GAP) significantly improved CGTase activities by 735% and 205% in extracellular and periplasmic compartment, respectively, with an increase of only ∼1.7 fold the amount of β-galactosidase (cell lysis) in the medium. GAP has the highest secretion rate of 45.6 U/ml/h among all clones, where physicochemical characteristics of signal peptide play significant role.     

Regulation and secretion of an extracellular esterase from Streptomyces scabies.

Production of a heat-stable, extracellular esterase by Streptomyces scabies is regulated by zinc ions. The esterase-encoding gene (est) from S. scabies was cloned and expressed in Streptomyces lividans. In S. lividans, expression of the est gene is also regulated by Zn2+, and the esterase is efficiently secreted in this organism. The sequence of the est gene suggests that a 39-amino acid signal peptide is removed during secretion of this protein. Deletion analysis has indicated that the hydrophobic domain of the signal peptide is required for secretion. Gel retardation assays and DNaseI footprinting using an S-30 protein extract from S. scabies have previously identified a specific 23-bp protein-binding site upstream from the est coding sequence. Deletion of this protein-binding sequence significantly decreased expression of the est gene.     

Stable expression and secretion of polyhydroxybutyrate depolymerase of <Emphasis Type="Italic">Paucimonas lemoignei</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

An efficient strategy for the expression and secretion of extracellular polyhydroxybutyrate depolymerase (PhaZ1) of Paucimonas lemoignei in Escherichia coli was developed by employing the signal peptide of PhaZ1 and a truncated ice nucleation protein anchoring motif (INPNC). Directly synthesized mature form of Phaz1 was present in the cytoplasm of host cells as inclusion bodies, while a construct containing Phaz1 and its own N-terminal signal peptide (PrePhaz1) enabled the secretion of active Phaz1 into the extracellular medium. However, the PrePhaz1 construct was harmful to the host cell and resulted in atypical growth and instability of the plasmid during the cultivation. In contrast, INPNC-Phaz1 and INPNC-PrePhaz1 fusion constructs did not affect growth of host cells. INPNC-Phaz1 was successfully displayed on the cell surface with its fusion form, but did not retain Phaz1 activity. In the case of INPNC-PrePhaz1, the initially synthesized fusion form was separated by precise cleavage of the signal peptide, and active Phaz1 was consequently released into the culture medium. The amount of Phaz1 derived from E. coli (INPNC-PrePhaz1) was almost twice as great as that directly expressed from E. coli (PrePhaz1), and was predominantly (approximately 85%) located in the periplasm when cultivated at 22°C but was efficiently secreted into the extracellular medium when cultivated at 37°C.