Changes in the organization of the actin cytoskeleton during preimplantation development of the pig embryo

The organization of the actin cytoskeleton was studied in unfertilized porcine oocytes and preimplantation stage embryos from Day 1 through Day 8 of development. Fixed and detergent-extracted oocytes and embryos were analyzed by fluorescence microscopy after staining with either rhodamine-phalloidin to localize filamentous actin or with affinity-purified anti-actin antibodies to localize the total immunodetectable actin. Whereas unfertilized oocytes contain immunoreactive cytoplasmic actin, rhodamine-phalloidin binding is not detected until fertilization when a prominent cortical staining pattern becomes apparent. In early cleavage stage embryos, filamentous actin is concentrated in the cell cortex of blastomeres especially at sites of cell-cell contact. Compacting morulae exhibit a marked accumulation of actin at the margins of blastomeres where numerous interdigitating cell processes are located. The predominantly pericellular distribution of actin becomes a distinguishing feature of trophectodermal cells in the expanding blastocyst at Day 6 of development; these cells form a prominent actin-limited zone circumscribing the inner cell mass. In Day 8 blastocysts, three cell types are present that are readily distinguishable based upon their actin displays among other cytological features. Trophectodermal cells exhibit continuous actin-rich lateral borders and stress fibers along their basal surface. Inner cell mass cells contain a discontinuous actin boundary and prominent foci of actin along their blastocoelic surface. Lining the blastocoel are patches of endodermal cells in which the actin is exclusively cortical. The data are discussed with respect to differences between species and the chronology of actin rearrangements during preimplantation development of the porcine embryo.     

Structural and Viscoelastic Properties of Actin/Filamin Networks: Cross-Linked versus Bundled Networks

The high diversity of cytoskeletal actin structures is accomplished by myriads of actin binding proteins (ABPs). Depending on its concentration, even a single type of ABP can induce different actin microstructures. Thus, for an overall understanding of the cytoskeleton, a detailed characterization of the cross-linker's effect on structural and mechanical properties of actin networks is required for each ABP. Using confocal microscopy and macrorheology, we investigate both cross-linked and bundled actin/filamin networks and compare their microstructures as well as their viscoelastic properties in the linear and the nonlinear regime.     

Comparison of the properties of two kinds of preparations of human blood platelet actin with sarcomeric actin

A new procedure of purification of actin from human blood platelets was used. This method starting from acetone powder of whole platelets gives a much higher yield than the one previously described (actin I) (Landon et al. (1977) Eur. J. Biochem., 81, 571-577). This actin II preparation has the same reduced viscosity as skeletal muscle actin, while the reduced viscosity of actin I preparation is about 1/10 of this value. Moreover actin I has the form of very short filaments as shown by electron microscopy. After an extra step of purification actin I, when polymerized, acquired a high reduced viscosity. We confirmed that platelet and sarcomeric actins are similar in their polymerization properties and their ability to activate muscular myosin. A circular dichroism study showed that the overall conformation of both actins are similar, but the environment of their aromatic chromophores is different.     

Actin cytoskeletal organisation in osteoclasts: a model to decipher transmigration and matrix degradation

Osteoclasts are large monocyte-derived multinucleated cells whose function is to resorb bone, i.e. a mineralised extracellular matrix. They exhibit two different actin cytoskeleton organisations according to their substratum. On non-mineralised substrates they form canonical podosomes, but on mineralised extracellular matrices they form a sealing zone. Podosomes consist of two functionally different actin subdomains: a podosome core, probably made of branched actin organised through a CD44 transmembrane receptor, and an actin cloud of actin cables organised around alphavbeta3 integrin. During osteoclast differentiation, podosome patterning is highly dynamic, and we propose that it ends up in a sealing zone in mature bone-resorbing osteoclasts after a complete reorganisation of the two subdomains. In addition to matrix degradation, osteoclasts share with tumour cells the ability to transmigrate through cell layers and-for that purpose-can arrange their cytoskeleton in long protrusions reminiscent of invadopodia. In this review, we discuss the relationships between podosomes and sealing zone, comparing their structures, their molecular composition and their abilities to degrade extracellular matrices. The dynamic actin remodelling in osteoclasts appears then as a major factor to understand their unusual abilities reminiscent of metastatic tumour cells.     

Organization of actin networks in intact filopodia

Filopodia are finger-like extensions of the cell surface that are involved in sensing the environment, in attachment of particles for phagocytosis, in anchorage of cells on a substratum, and in the response to chemoattractants or other guidance cues. Filopodia present an excellent model for actin-driven membrane protrusion. They grow at their tips by the assembly of actin and are stabilized along their length by a core of bundled actin filaments. To visualize actin networks in their native membrane-anchored state, filopodia of Dictyostelium cells were subjected to cryo-electron tomography. At the site of actin polymerization, a peculiar structure, the "terminal cone," is built of short filaments fixed with their distal end to the filopod's tip and with their proximal end to the flank of the filopod. The backbone of the filopodia consists of actin filaments that are shorter than the entire filopod and aligned in parallel or obliquely to the filopod's axis. We hypothesize that growth of the highly dynamic filopodia of Dictyostelium is accompanied by repetitive nucleation of actin polymerization at the filopod tip, followed by the rearrangement of filaments within the shaft.     

Actin cytoskeleton dynamics and the cell division cycle

The network of actin filaments is one of the crucial cytoskeletal structures contributing to the morphological framework of a cell and which participates in the dynamic regulation of cellular functions. In adherent cell types, cells adhere to the substratum during interphase and spread to assume their characteristic shape supported by the actin cytoskeleton. This actin cytoskeleton is reorganized during mitosis to form rounded cells with increased cortical rigidity. The actin cytoskeleton is re-established after mitosis, allowing cells to regain their extended shape and attachment to the substratum. The modulation of such drastic changes in cell shape in coordination with cell cycle progression suggests a tight regulatory interaction between cytoskeleton signalling, cell–cell/cell–matrix adhesions and mitotic events. Here, we review the contribution of the actin cytoskeleton to cell cycle progression with an emphasis on the effectors responsible for the regulation of the actin cytoskeleton and integration of their activities with the cell cycle machinery.     

The complete amino acid sequence of actins from bovine aorta, bovine heart, bovine fast skeletal muscle, and rabbit slow skeletal muscle. A protein-chemical analysis of muscle actin differentiation.

Complete amino acid sequences for four mammalian muscle actins are reported: bovine skeletal muscle actin, bovine cardiac actin, the major component of bovine aorta actin, and rabbit slow skeletal muscle actin. The number of different actins in a higher mammal for which full amino acid sequences are now available is therefore increased from two to five. Screening of different smooth muscle tissues revealed in addition to the aorta type actin a second smooth muscle actin, which appears very similar if not identical to chicken gizzard actin. Since the sequence of chicken gizzard actin is known, six different actins are presently characterized in a higher mammal. The two smooth muscle actins--bovine aorta actin and chicken gizzard actin--differ by only three amino acid substitutions, all located in the amino-terminal end. In the rest of their sequences both smooth muscle actins share the same four amino acid substitutions, which distinguish them from skeletal muscle actin. Cardiac muscle actin differs from skeletal muscle actin by only four amino acid exchanges. No amino acid substitutions were found when actins from rabbit fast and slow skeletal muscle were compared. In addition we summarize the amino acid substitution patterns of the six different mammalian actins and discuss their tissue specificity. The results show a very close relationship between the four muscle actins in comparison to the nonmuscle actins. The amino substitution patterns indicate that skeletal muscle actin is the highest differentiated actin form, whereas smooth muscle actins show a noticeably cloer relation to nonmuscle actins. By these criteria cardiac muscle actin lies between skeletal muscle actin and smooth muscle actins.     

The Complete Amino Acid Sequence of Actins from Bovine Aorta, Bovine Heart, Bovine Fast Skeletal Muscle, and Rabbit, Slow Skeletal Muscle

Complete amino acid sequences for four mammalian muscle actins are reported: bovine skeletal muscle actin, bovine cardiac actin, the major component of bovine aorta actin, and rabbit slow skeletal muscle actin. The number of different actins in a higher mammal for which full amino acid sequences are now available is therefore increased from two to five. Screening of different smooth muscle tissues revealed in addition to the aorta type actin a second smooth muscle actin, which appears very similar if not identical to chicken gizzard actin. Since the sequence of chicken gizzard actin is known, six different actins are presently characterized in a higher mammal.
The two smooth muscle actins—bovine aorta actin and chicken gizzard actin—differ by only three amino acid substitutions, all located in the amino-terminal end. In the rest of their sequences both smooth muscle actins share the same four amino acid substitutions, which distinguish them from skeletal muscle actin. Cardiac muscle actin differs from skeletal muscle actin by only four amino acid exchanges. No amino acid substitutions were found when actins from rabbit fast and slow skeletal muscle were compared.
In addition we summarize the amino acid substitution patterns of the six different mammalian actins and discuss their tissue specificity. The results show a very close relationship between the four muscle actins in comparison to the nonmuscle actins. The amino substitution patterns indicate that skeletal muscle actin is the highest differentiated actin form, whereas smooth muscle actins show a noticeably closer relation to nonmuscle actins. By these criteria cardiac muscle actin lies between skeletal muscle actin and smooth muscle actins.     

Purified integrin adhesion complexes exhibit actin-polymerization activity

BACKGROUND: Cell adhesion and motility are accomplished through a functional linkage of the extracellular matrix with the actin cytoskeleton via adhesion complexes composed of integrin receptors and associated proteins. To determine whether this linkage is attained actively or passively, we isolated integrin complexes from nonadherent hematopoietic cells and determined their influence on the polymerization of actin. RESULTS: We observed that alpha(V)beta3 complexes are capable of dramatically accelerating the rate of actin assembly, resulting in actin fibers tethered at their growing ends by clustered integrins. The ability to enhance actin polymerization was dependent upon Arg-Gly-Asp-ligand-induced beta3 tyrosine phosphorylation, agonist-induced cellular activation, sequestration of Diaphanous formins, and clustering of the receptor. CONCLUSIONS: These results suggest that adhesion complexes actively promote actin assembly from their cytosolic face in order to establish a mechanical linkage with the extracellular matrix.     

Substrate deformation determines actin cytoskeleton reorganization: A mathematical modeling and experimental study

A mathematical model has been developed to define the relationship between the actin cytoskeleton reorganization of a cell and substrate deformation acting on the cell. The model is based on the following major assumptions: (a) normal substrate strain, not the shear substrate strain, determines the actin cytoskeleton reorganization; (b) the normal substrate strain is transmitted to individual actin filaments; (c) each actin filament has a basal strain energy (BSE) when the cell adheres to the substrate without stretching; and (d) the actin filaments undergo disassembly when their strain energies are decreased to zero or increased to twice their BSEs. The resulting model predicts that the actin filaments are formed in the direction where their BSEs are minimally altered. This direction is therefore the one without normal substrate strain. The prediction was confirmed by experiments conducted on both fibroblasts and endothelial cells. The present model may be relevant for understanding better the effects of mechanical stimuli on the cells.     

The Yeast Actin Cytoskeleton: from Cellular Function to Biochemical Mechanism

All cells undergo rapid remodeling of their actin networks to regulate such critical processes as endocytosis, cytokinesis, cell polarity, and cell morphogenesis. These events are driven by the coordinated activities of a set of 20 to 30 highly conserved actin-associated proteins, in addition to many cell-specific actin-associated proteins and numerous upstream signaling molecules. The combined activities of these factors control with exquisite precision the spatial and temporal assembly of actin structures and ensure dynamic turnover of actin structures such that cells can rapidly alter their cytoskeletons in response to internal and external cues. One of the most exciting principles to emerge from the last decade of research on actin is that the assembly of architecturally diverse actin structures is governed by highly conserved machinery and mechanisms. With this realization, it has become apparent that pioneering efforts in budding yeast have contributed substantially to defining the universal mechanisms regulating actin dynamics in eukaryotes. In this review, we first describe the filamentous actin structures found in Saccharomyces cerevisiae (patches, cables, and rings) and their physiological functions, and then we discuss in detail the specific roles of actin-associated proteins and their biochemical mechanisms of action.     

Participation of Rho, ROCK-2, and GAP activities during actin microfilament rearrangements in Entamoeba histolytica induced by fibronectin signaling

In Entamoeba histolytica little is known about the microfilament rearrangements formed by actin and ABPs. Fibronectin regulates many aspects of cell behavior involving the actin cytoskeleton and members of the Rho family of small GTPases. Using trophozoites interacted with fibronectin and glass, we present evidence related with the formation and regulation of different microfilament rearrangements and their cellular distribution, the effect of actin affecting drugs on these arrangements, and on trophozoites adhesion; we also demonstrate that actin isoforms are induced after adhesion, and also the selective participation of specific actin binding proteins such as ABP-120 and phospho-paxillin, regarding their location in the different actin structures. In addition, we show results that confirm the participation of EhRho, ROCK-2, and GAP activities. We propose that fibronectin induced signaling in E. histolytica trophozoites have important consequences in the actin cytoskeleton that may affect its behavior during the invasive process in the host.     

Clustering of VASP actively drives processive, WH2 domain-mediated actin filament elongation

Vasodilator-stimulated phosphoprotein (VASP) is a key regulator of dynamic actin structures like filopodia and lamellipodia, but its precise function in their formation is controversial. Using in vitro TIRF microscopy, we show for the first time that both human and Dictyostelium VASP are directly involved in accelerating filament elongation by delivering monomeric actin to the growing barbed end. In solution, DdVASP markedly accelerated actin filament elongation in a concentration-dependent manner but was inhibited by low concentrations of capping protein (CP). In striking contrast, VASP clustered on functionalized beads switched to processive filament elongation that became insensitive even to very high concentrations of CP. Supplemented with the in vivo analysis of VASP mutants and an EM structure of the protein, we propose a mechanism by which membrane-associated VASP oligomers use their WH2 domains to effect both the tethering of actin filaments and their processive elongation in sites of active actin assembly.     

Actin filament destruction by osmium tetroxide

We have studied the destruction of purified muscle actin filaments by osmium tetroxide (OsO4) to develop methods to preserve actin filaments during preparation for electron microscopy. Actin filaments are fragmented during exposure to OsO4. This causes the viscosity of solutions of actin filaments to decrease, ultimately to zero, and provides a convenient quantitative assay to analyze the reaction. The rate of filament destruction is determined by the OsO4 concentration, temperature, buffer type and concentration, and pH. Filament destruction is minimized by treatment with a low concentration of OsO4 in sodium phosphate buffer, pH 6.0, at 0 degrees C. Under these conditions, the viscosity of actin filament solutions is stable and actin filaments retain their straight, unbranched structure, even after dehydration and embedding. Under more severe conditions, the straight actin filaments are converted into what look like the microfilament networks commonly observed in cells fixed with OsO4. Destruction of actin filaments can be inhibited by binding tropomyosin to the actin. Cross-linking the actin molecules within a filament with glutaraldehyde does not prevent their destruction by OsO4. The viscosity decrease requires the continued presence of free OsO4. During the time of the viscosity change, OsO4 is reduced and the sulfur-containing amino acids of actin are oxidized, but little of the osmium is bound to the actin. Over a much longer time span, the actin molecules are split into discrete peptides.     

Dynamics of actin filaments during tension-dependent formation of actin bundles

The actin cytoskeleton stress fiber is an actomyosin-based contractile structure seen as a bundle of actin filaments. Although tension development in a cell is believed to regulate stress fiber formation, little is known for the underlying biophysical mechanisms. To address this question, we examined the effects of tension on the behaviors of individual actin filaments during stress fiber (actin bundle) formation using cytosol-free semi-intact fibroblast cells that were pre-treated with the Rho kinase inhibitor Y-27632 to disassemble stress fibers into a meshwork of actin filaments. These filaments were sparsely labeled with quantum dots for live tracking of their motions. When ATP and Ca(2+) were applied to the semi-intact cells to generate actomyosin-based forces, actin meshwork in the protruded lamellae was dragged toward the cell body, while the periphery of the meshwork remained in the original region, indicating that centripetally directed tension developed in the meshwork. Then the individual actin filaments in the meshwork moved towards the cell body accompanied with sudden changes in the direction of their movements, finally forming actin bundles along the direction of tension. Dragging the meshwork by externally applied mechanical forces also exerted essentially the same effects. These results suggest the existence of tension-dependent remodeling of cross-links within the meshwork during the rearrangement of actin filaments, thus demonstrating that tension is a key player to regulate the dynamics of individual actin filaments that leads to actin bundle formation.     

Actin mRNA Levels and Actin Synthesis During the Encystation of Entamoeba invadens

ABSTRACT. Parasitic amebas propagate among hosts through cysts, the resistant forms in their life cycle. In spite of their key role in infection, little is known about the encystation process and the mechanisms involved in reaching this stage. Two features drastically affected by encystation are motility and cell shape, both of which are determined by the cytoskeleton, composed mainly of actin in these organisms. Therefore, we studied the occurrence and relative levels of actin and actin synthesis during encystation of Entamoeba invadens. Using a cDNA actin probe obtained from a library of E. histolytica and a monoclonal antibody against actin, we found that, while the total actin levels sharply decrease as encystation proceeds, the levels of actin mRNA are reduced only in mature cysts. Moreover, actin synthesis does not take place in precysts and the later stages of cyst formation. In contrast, the levels of other proteins remain stable in trophozoites, precysts and cysts, and stage specific peptides are actively synthesized in precysts. The results indicate that encystation is accompanied by a preferential down-regulation of actin synthesis and a decrease in actin levels. The reorganization of the cytoskeleton occurring as trophozoites transform into round, quiescent cells, could be a regulatory factor in the observed changes.     

Mechanism of lateral movement of filopodia and radial actin bundles across neuronal growth cones

We investigated the motion of filopodia and actin bundles in lamellipodia of motile cells, using time-lapse sequences of polarized light images. We measured the velocity of retrograde flow of the actin network and the lateral motion of filopodia and actin bundles of the lamellipodium. Upon noting that laterally moving filopodia and actin bundles are always tilted with respect to the direction of retrograde flow, we propose a simple geometric model for the mechanism of lateral motion. The model establishes a relationship between the speed of lateral motion of actin bundles, their tilt angle with respect to the direction of retrograde flow, and the speed of retrograde flow in the lamellipodium. Our experimental results verify the quantitative predictions of the model. Furthermore, our observations support the hypothesis that lateral movement of filopodia is caused by retrograde flow of tilted actin bundles and by their growth through actin polymerization at the tip of the bundles inside the filopodia. Therefore we conclude that the lateral motion of tilted filopodia and actin bundles does not require a separate motile mechanism but is the result of retrograde flow and the assembly of actin filaments and bundles near the leading edge of the lamellipodium.     

Cofilin recruitment and function during actin-mediated endocytosis dictated by actin nucleotide state

Cofilin is the major mediator of actin filament turnover in vivo. However, the molecular mechanism of cofilin recruitment to actin networks during dynamic actin-mediated processes in living cells and cofilin's precise in vivo functions have not been determined. In this study, we analyzed the dynamics of fluorescently tagged cofilin and the role of cofilin-mediated actin turnover during endocytosis in Saccharomyces cerevisiae. In living cells, cofilin is not necessary for actin assembly on endocytic membranes but is recruited to molecularly aged adenosine diphosphate actin filaments and is necessary for their rapid disassembly. Defects in cofilin function alter the morphology of actin networks in vivo and reduce the rate of actin flux through actin networks. The consequences of decreasing actin flux are manifested by decreased but not blocked endocytic internalization at the plasma membrane and defects in late steps of membrane trafficking to the vacuole. These results suggest that cofilin-mediated actin filament flux is required for the multiple steps of endocytic trafficking.     

Guardians of the actin monomer

Actin is a universal force provider in eukaryotic cells. Biological processes harness the pressure generated from actin polymerization through dictating the time, place and direction of filament growth. As such, polymerization is initiated and maintained via tightly controlled filament nucleation and elongation machineries. Biological systems integrate force into their activities through recruiting and activating these machineries. In order that actin function as a common force generating polymerization motor, cells must maintain a pool of active, polymerization-ready monomeric actin, and minimize extemporaneous polymerization. Maintenance of the active monomeric actin pool requires the recycling of actin filaments, through depolymerization, nucleotide exchange and reloading of the polymerization machineries, while the levels of monomers are constantly monitored and supplemented, when needed, via the access of a reserve pool of monomers and through gene expression. Throughout its monomeric life, actin needs to be protected against gratuitous nucleation events. Here, we review the proteins that act as custodians of monomeric actin. We estimate their levels on a tissue scale, and calculate the implied concentrations of each actin complex based on reported binding affinities. These estimations predict that monomeric actin is rarely, if ever, alone. Thus, the guardians keep the volatility of actin in check, so that its explosive power is only released in the controlled environments of the nucleation and polymerization machineries.