easySTORM: a robust,lower‐cost approach to localisation and TIRF microscopy

TIRF and STORM microscopy are super‐resolving fluorescence imaging modalities for which current implementations on standard microscopes can present significant complexity and cost. We present a straightforward and low‐cost approach to implement STORM and TIRF taking advantage of multimode optical fibres and multimode diode lasers to provide the required excitation light. Combined with open source software and relatively simple protocols to prepare samples for STORM, including the use of Vectashield for non‐TIRF imaging, this approach enables TIRF and STORM imaging of cells labelled with appropriate dyes or expressing suitable fluorescent proteins to become widely accessible at low cost.

     

Optical hyperspectral imaging in microscopy and spectroscopy – a review of data acquisition

Rather than simply acting as a photographic camera capturing two‐dimensional (x, y) intensity images or a spectrometer acquiring spectra (λ), a hyperspectral imager measures entire three‐dimensional (x, y, λ) datacubes for multivariate analysis, providing structural, molecular, and functional information about biological cells or tissue with unprecedented detail. Such data also gives clinical insights for disease diagnosis and treatment. We summarize the principles underpinning this technology, highlight its practical implementation, and discuss its recent applications at microscopic to macroscopic scales.

Datacube acquisition strategies in hyperspectral imaging x, y, spatial coordinates; λ, wavelength.     

A new approach for optical assessment of directional anisotropy in turbid media

A study of polarized light transport in scattering media exhibiting directional anisotropy or linear birefringence is presented in this paper. Novel theoretical and experimental methodologies for the quantification of birefringent alignment based on out‐of‐plane polarized light transport are presented here. A polarized Monte Carlo model and a polarimetric imaging system were devised to predict and measure the impact of birefringence on an impinging linearly polarized light beam. Ex‐vivo experiments conducted on bovine tendon, a biological sample consisting of highly packed type I collagen fibers with birefringent property, showed good agreement with the analytical results.

Top view geometry of the in‐plane ( a ) and the out‐of‐plane ( b ) detection. Letter C indicates the location of the detection arm.     

Hyperspectral imaging in medicine: image pre‐processing problems and solutions in Matlab

The paper presents problems and solutions related to hyperspectral image pre‐processing. New methods of preliminary image analysis are proposed. The paper shows problems occurring in Matlab when trying to analyse this type of images. Moreover, new methods are discussed which provide the source code in Matlab that can be used in practice without any licensing restrictions.

The proposed application and sample result of hyperspectral image analysis.     

Dual‐polarization Raman spectral imaging to extract overlapping molecular fingerprints of living cells

Raman spectral imaging is gaining more and more attention in biological studies because of its label‐free characteristic. However, the discrimination of overlapping chemical contrasts has been a major challenge. In this study, we introduce an optical method to simultaneously obtain two orthogonally polarized Raman images from a single scan of the sample. We demonstrate how this technique can improve the quality and quantity of the hyperspectral Raman dataset and how the technique is expected to further extend the horizons of Raman spectral imaging in biological studies by providing more detailed chemical information.

The dual‐polarization Raman images of a HeLa cell.     

Brillouin spectroscopy as a new method of screening for increased CSF total protein during bacterial meningitis

Bacterial meningitis is a disease of pronounced clinical significance, especially in the developing world. Immediate treatment with antibiotics is essential, and no single test can provide a conclusive diagnosis. It is well established that elevated total protein in cerebrospinal fluid (CSF) is associated with bacterial meningitis. Brillouin spectroscopy is a widely used optical technique for noninvasive determination of the elastic moduli of materials. We found that elevated protein levels in CSF alter the fluid elasticity sufficiently to be measurable by Brillouin spectroscopy, with model healthy and diseased fluids distinguishable to marked significance (P = 0.014), which increases with sample concentration by dialysis.

Typical raw output of a 2‐stage VIPA Brillouin spectrometer: inelastically scattered Brillouin peaks (arrows) and elastically scattered incident radiation (center cross).     

Ex vivo investigations on the potential of optical coherence tomography (OCT) as a diagnostic tool for reproductive medicine in a bovine model

Routine infertility investigations in the male and female include imaging techniques such as ultrasonography and endoscopy (fertiloscopy). However, these techniques lack the resolution to localize vital sperm or to reveal detailed morphological analysis of the oviduct which is often the cause of infertility in females. Therefore we set out to evaluate the efficiency of optical coherence tomography (OCT) as a diagnostic imaging tool for micron‐scale visualization of the male and female genital tract. Using the bovine as a model, the optical features of the Telesto^TM, Ganymede^TM (both Thorlabs) and Niris^TM (Imalux) OCT imaging systems were compared.

Comparative visualization of ex vivo bovine testicular tissue by the Telesto^TM microscopic optical coherence tomography system (left) and corresponding H&E staining (right).     

Fiber probe for nonlinear imaging applications

Over the past years it had been demonstrated that multimodal imaging combining the nonlinear modalities coherent anti‐Stokes Raman scattering (CARS), two‐photon excited auto‐fluorescence (TPEF) and second harmonic generation (SHG) show a great potential for tissue diagnosis and tumor identification. To extend the applicability of this multimodal imaging approach for in‐vivo tissue screening of difficult to access body regions the development of suitable fiber optic probes is required. Here we report about a novel CARS imaging fiber probe consisting of 10,000 coherent light guiding elements preserving the spatial relationship between the entrance and the output of the fiber. Therefore the scanning procedure can be shifted from the distal to the proximal end of the fiber probe and no moving parts or driving current are required to realize in‐vivo CARS endoscopy.

Back scattered CARS image of rabbit aorta with plaques (white) using a laser scanning microscope and an imaging fiber.     

Improved detectability of microcirculatory dynamics by laser speckle flowmetry

Mechanisms of renal autoregulation generate oscillations in arterial blood flow at several characteristic frequencies. Full‐field laser speckle flowmetry provides a real‐time imaging of superficial blood microcirculation. The possibility to detect changes in oscillatory dynamics is an important issue in biomedical applications. In this paper we show how laser power density affects quality of the recorded signal and improves detectability of temporal changes in microvascular perfusion.

     

Surface functionalization allowing repetitive use of optical sensors for real‐time detection of antibody‐bacteria interaction

In this study, sensor surface functionalization allowing the repetitive use of a sensing device was evaluated for antibody‐based detection of living bacteria using an optical planar Bragg grating sensor. To achieve regenerable immobilization of bacteria specific antibodies, the heterobifunctional cross‐linker N‐succinimidyl 3‐(2‐pyridyldithio) propionate (SPDP) was linked to an aminosilanized sensor surface and subsequently reduced to expose sulfhydryl groups enabling the covalent conjugation of SPDP‐activated antibodies via disulfide bonds. The immobilization of a capture antibody specific for Staphylococcus aureus on the sensor surface as well as specific binding of S. aureus could be monitored, highlighting the applicability of optical sensors for the specific detection of large biological structures. Reusability of bacteria saturated sensors was successfully demonstrated by cleaving the antibody along with bound bacteria through reduction of disulfide bonds and subsequent re‐functionalization with activated antibody, resulting in comparable sensitivity towards S. aureus.

     

Issue Information

Primary segregative cell division in Struvea okamurae (Photos by A. Hasebe). The same apical portion of a cylindrical cell was photographed in order from left to right 72 min, 109 min, 126 min, 136 min, 148 min, 294 min, and 492 min after the light period had begun. See Okuda et al. See pages 219–229. Cover picture from: Article link here

     

Detecting concentrations of milk components by an iterative optical technique

This paper introduces a theoretical and practical model for reconstructing the scattering properties of a participating media. Our theory is based on a robust generalization of the Gerchberg–Saxton (G–S) algorithm. At the end of this algorithm the reduced scattering coefficient μ′_s of a given substance, can be estimated from the standard deviation (STD) of the retrieved phase of the remitted light. We use the theory to compute the phase's STD that directly correlated to the optical properties for different types of milk components, and we derive a novel appearance model for milk parameterized by the lactose and protein contents. Our results show that we are able to detect the possibility of lactose and milk proteins' quantitative signature by the G–S optical tool, en route to the design of a novel milk‐content‐monitoring tool.

Sketch of the experimental setup for light intensity measurements and reduced scattering coefficient reconstruction. The samples were prepared from various milk components: whey protein, sodium casienate and lactose, at different concentrations.     

Recent advances in optical fiber devices for microfluidics integration

This paper examines the recent emergence of miniaturized optical fiber based sensing and actuating devices that have been successfully integrated into fluidic microchannels that are part of microfluidic and lab‐on‐chip systems. Fluidic microsystems possess the advantages of reduced sample volumes, faster and more sensitive biological assays, multi‐sample and parallel analysis, and are seen as the de facto bioanalytical platform of the future. This paper considers the cases where the optical fiber is not merely used as a simple light guide delivering light across a microchannel, but where the fiber itself is engineered to create a new sensor or tool for use within the environment of the fluidic microchannel.

Detection and trapping of molecules can be achieved with optical fibers directly located within the fluidic microchannel.     

A new fluorescent dye for cell tracing and mitochondrial imaging in vitro and in vivo

Mitochondria contribute to redox and calcium balance, and apoptosis thus regulating cellular fate. In the present study, mitochondrial staining applying a novel dye, V07‐07059, was performed in human embryonic kidney cells, a human vascular endothelial cell line and primary human mononuclear cells. The new fluorescent mega Stokes dye (peak excitation: 488 nm, peak emission: 554 nm) showed superior fluorescent properties and stability. V07‐07059 stains mitochondria dependent on their membrane potential and is safe to use in vitro and in vivo. Unlike other dyes applied in this context (e.g. Tetramethylrhodamine methyl ester), V07‐07059 only marginally inhibits mitochondrial respiration and function. V07‐07059 enables real time imaging of mitochondrial trafficking and remodeling. Prolonged staining with V07‐07059 demonstrated the dyes suitability as a novel probe to track cells. In comparison to the widely used standard for cell proliferation and tracking studies 5(6)‐diacetate N‐succinimidyl ester, V07‐07059 proved superior regarding toxicity and photostability.

     

Cell nuclei have lower refractive index and mass density than cytoplasm

Common perception regards the nucleus as a densely packed object with higher refractive index (RI) and mass density than the surrounding cytoplasm. Here, the volume of isolated nuclei is systematically varied by electrostatic and osmotic conditions as well as drug treatments that modify chromatin conformation. The refractive index and dry mass of isolated nuclei is derived from quantitative phase measurements using digital holographic microscopy (DHM). Surprisingly, the cell nucleus is found to have a lower RI and mass density than the cytoplasm in four different cell lines and throughout the cell cycle. This result has important implications for conceptualizing light tissue interactions as well as biological processes in cells.

     

In situ non‐destructive measurement of biofilm thickness and topology in an interferometric optical microscope

Biofilms are ubiquitous and impact the environment, human health, dental hygiene, and a wide range of industrial processes. Biofilms are difficult to characterize when fully hydrated, especially in a non‐destructive manner, because of their soft structure and water‐like bulk properties. Herein a method of measuring and monitoring the thickness and topology of live biofilms of using white light interferometry is described. Using this technique, surface morphology, surface roughness, and biofilm thickness were measured over time without while the biofilm continued to grow. The thickness and surface topology of a P. putida biofilm were monitored growing from initial colonization to a mature biofilm. Measured thickness followed expected trends for bacterial growth. Surface roughness also increased over time and was a leading indicator of biofilm growth.

     

Enhancement of optical coherence microscopy in turbid media by an optical parametric amplifier

We report the enhancement in imaging performance of a spectral‐domain optical coherence microscope (OCM) in turbid media by incorporating an optical parametric amplifier (OPA). The OPA provides a high level of optical gain to the sample arm, thereby improving the signal‐to‐noise ratio of the OCM by a factor of up to 15 dB. A unique nonlinear confocal gate is automatically formed in the OPA, which enables selective amplification of singly scattered (ballistic) photons against the multiply‐scattered light background. Simultaneous enhancement in both imaging depth and spatial resolution in imaging microstructures in highly light‐scattering media are demonstrated with the combined OPA‐OCM setup.

Typical OCM inteferograms (left) and images (right) without and with OPA.     

Investigation of the differentiation of ex vivo nerve and fat tissues using laser‐induced breakdown spectroscopy (LIBS): Prospects for tissue‐specific laser surgery

In the present study, the elemental compositions of fat and nerve tissue during their plasma mediated laser ablation are studied in the context of tissue differentiation for laser surgery applications by using Laser‐Induced Breakdown Spectroscopy (LIBS). Tissue samples of porcine fat and nerve were prepared as ex vivo experimental objects. Plasma mediated laser ablation is performed using an Nd : YAG laser in open air and under normal stray light conditions. The performed measurements suggest that the two tissue types show a high similarity in terms of qualitative elemental composition while at the same time revealing a distinct difference in the concentration of the constituent elements. Different analysis approaches are evaluated and discussed to optimize the tissue‐differentiation performance of the LIBS approach.

Plasma mediated laser tissue ablation.     

Toward the measurement of multiple fluorescence lifetimes in flow cytometry: maximizing multi‐harmonic content from cells and microspheres

Flow cytometry is a powerful means for in vitro cellular analyses where multi‐fluorescence and multi‐angle light scattering can indicate unique biochemical or morphological features of single cells. Yet, to date, flow cytometry systems have lacked the ability to capture complex fluorescence dynamics due to the transient nature of flowing cells. In this contribution we introduce a simple approach for measuring multiple fluorescence lifetimes from a single cytometric event. We leverage square wave modulation, Fourier analysis, and high frequency digitization and show the ability to resolve more than one fluorescence lifetime from fluorescently‐labelled cells and microspheres.

Illustration of a flow cytometer capable of capturing multiple fluorescence lifetime measurements; creating potential for multi‐parametric, time‐resolved signals to be captured for every color channel.     

Maintaining polarization in polarimetric multiphoton microscopy

Polarimetric measurements in multiphoton microscopy can reveal information about the local molecular order of a sample. However, the presence of a dichroic through which the excitation beam propagates will generally scramble its polarization. We propose a simple scheme whereby a second properly‐oriented compensation dichroic is used to negate any alteration regardless of the wavelength and the initial polarization. We demonstrate how this robust and rapid approach simplifies polarimetric measurements in second‐harmonic generation, two‐photon excited fluorescence and coherent anti‐Stokes Raman scattering.

Illustration of the polarization maintaining strategy with the compensating dichroic oriented such that its s‐ and p‐axes are interchanged with these of the primary dichroic.