Frequency of HLA-DQA1 alleles in the Japanese population.

One of the HLA class II genes, HLA-DQA1, was typed from 290 unrelated healthy Japanese using the oligonucleotide typing method. The HLA-DQA1 gene was enzymatically amplified and typed by dot-blot hybridizations with 10 sequence-specific oligonucleotide probes labeled nonradioactively. Using this method, the HLA-DQA1 genotype was theoretically classified into 36 genotypes: 8 homozygous and 28 heterozygous ones. Actually, 26 genotypes were observed in the present study, and the gene frequency of each allele was calculated. The observed numbers were in accordance with the numbers expected under the Hardy-Weinberg equilibrium. The HLA-DQA1 genotype was also determined in aged bloodstains. Since the genotype is polymorphic in the Japanese population and a very small amount of blood is required for determination, this typing is particularly useful for forensic analysis.     

Sensitive and specific detection of microRNAs by northern blot analysis using LNA-modified oligonucleotide probes

We describe here a new method for highly efficient detection of microRNAs by northern blot analysis using LNA (locked nucleic acid)-modified oligonucleotides. In order to exploit the improved hybridization properties of LNA with their target RNA molecules, we designed several LNA-modified oligonucleotide probes for detection of different microRNAs in animals and plants. By modifying DNA oligonucleotides with LNAs using a design, in which every third nucleotide position was substituted by LNA, we could use the probes in northern blot analysis employing standard end-labelling techniques and hybridization conditions. The sensitivity in detecting mature microRNAs by northern blots was increased by at least 10-fold compared to DNA probes, while simultaneously being highly specific, as demonstrated by the use of different single and double mismatched LNA probes. Besides being highly efficient as northern probes, the same LNA-modified oligonucleotide probes would also be useful for miRNA in situ hybridization and miRNA expression profiling by LNA oligonucleotide microarrays.     

多等位基因PCR-SSO反相杂交法及其在HLA-DR_4亚型结构分析中的应用

本文介绍一种适合于多等位基因定型和结构分析的反相顺序特异性寡核苷酸探针杂交方法。将化学合成的多种探针分别经脱氧核苷末端转移酶(TdT)催化,于3′端加上100个以上碱基的Poly(dT)尾,然后将各探针分别以斑点固定于同一张尼龙膜上。用PCR法对该基因位点进行扩增,扩增的同时加入α-~(32)P-dCTP以直接参入放射标记,然后将PCR产物与膜固定探针杂交,以四甲基氯化铵根据探针长度统一洗涤温度。该方法克服了以往对同一份样品进行多个等位基因检测时需要进行多次探针标记和杂交的缺点。我们用该方法对中国人群MHC-Ⅱ类DR4多等位基因进行了研究。     

Rapid HLA-DPB typing using enzymatically amplified DNA and nonradioactive sequence-specific oligonucleotide probes

A simple and rapid method for characterizing the polymorphism at the HLA-DPB1 locus has been developed. The procedure involves the selective amplification of the polymorphic second exon of the DPB1 locus by the polymerase chain reaction (PCR), followed by hybridization of the amplified DNA with 15 nonisotopic sequence-specific oligonucleotide probes. There are no sequences within the second exon of the DPB1 locus that uniquely define an allele; rather, each allele appears to arise from the shuffling of a limited number of polymorphic nucleotide sequences in six regions of variability. Consequently, individual alleles are identified by the pattern of hybridization of the 15 probes. Two formats for typing are described. In Format I (the dot-blot), the amplified DNA is ultraviolet (UV) cross-linked to a nylon membrane and hybridized with the oligonucleotide probes which are covalently labeled with horseradish peroxidase (HRP). In Format II (the reverse dot-blot), the oligonucleotides, which have poly-T tails, are bound to the membrane and the immobilized array of probes is hybridized to the PCR product which has incorporated biotinylated primers during the amplification process. In both formats, hybridization is detected by a simple colorimetric reaction. The application of this technology to the fields of tissue typing and individual identity is discussed. Offprint requests to: A. B. Begovich.     

DNA typing of primate major histocompatibility complex (Mhc)-DQA1 locus by PCR and dot blot hybridization.

Non-human primates (NHPs) are increasingly utilized as models to investigate different aspects of immune responses against self (autoimmunity) and foreign antigens. These animals provide valuable models for testing the efficacy of candidate vaccines against pathogens such as human immunodeficiency virus (HIV) and also fertility regulating agents (immunocontraceptives). In order to fully understand the effects of vaccination, it may be necessary to elucidate the immunogenetic background of these animals. The major histocompatibility complex (Mhc) molecules play an important role in the generation of effective immune responses. Serological techniques have been used in the identification of human leukocyte antigens (HLA) necessary for cross-matching organs and tissues for transplantation. However, the application of this technique for typing monkey Mhc alleles has been hampered by unavailability of well characterized immunological reagents. Polymerase chain reaction (PCR)-based techniques such as restriction fragment length polymorphism (RFLP) and sequence-specific oligonucleotide probe hybridization (SSOP) have been extensively used for typing HLA-DP, DQ and DR alleles. A commercially available Kit (AmpliTypeR) designed for amplification and typing of HLA DQalpha alleles is routinely used in typing DNA samples for forensic casework. In the present study, we have evaluated this kit for possible application in routine typing of primate DQA1 alleles. Genomic DNA from ten African primate species (23 individuals) was isolated from peripheral blood lymphocytes and polymorphic second exon of DQA1 locus amplified using GH26 and GH27 PCR primers. The PCR products were hybridized on a nylon membrane containing immobilized sequence-specific oligonucleotide probes. Our results show seven of the nine probes hybridizing with primate DQA1 alleles, indicating that typing of equivalent primate alleles can be accomplished at lower stringency conditions. However, it may be necessary to design additional oligonucleotides probes (based on available primate DQA1 sequences) to improve the discriminating power of this kit for use in routine typing of Old World monkey DQA1 alleles.     

Microarray detection of food-borne pathogens using specific probes prepared by comparative genomics

In order to design a method for the accurate detection and identification of food-borne pathogens, we used comparative genomics to select 70-mer oligonucleotide probes specific for 11 major food-borne pathogens (10 overlapping probes per pathogen) for use in microarray analysis. We analyzed the hybridization pattern of this constructed microarray with the Cy3-labeled genomic DNA of various food-borne pathogens and other bacteria. Our microarray showed a highly specific hybridization pattern with the genomic DNA of each food-borne pathogen; little unexpected cross-hybridization was observed. Microarray data were analyzed and clustered using the GenePix Pro 6.0 and GeneSpring GX 7.3.1 programs. The analyzed dendrogram revealed the discriminating power of constructed microarray. Each food-borne pathogen clustered according to its hybridization specificity and non-pathogenic species were discriminated from pathogenic species. Our method can be applied to the rapid and accurate detection and identification of food-borne pathogens in the food industry. In addition, this study demonstrates that genome sequence comparison and DNA microarray analysis have a powerful application in epidemiologic and taxonomic studies, as well as in the food safety and biodefense fields.     

On-chip hybridization kinetics for optimization of gene expression experiments

DNA microarray technology is a powerful tool for getting an overview of gene expression in biological samples. Although the successful use of microarray-based expression analysis was demonstrated in a number of applications, the main problem with this approach is the fact that expression levels deduced from hybridization experiments do not necessarily correlate with RNA concentrations. Moreover oligonucleotide probes corresponding to the same gene can give different hybridization signals. Apart from cross-hybridizations and differential splicing, this could be due to secondary structures of probes or targets. In addition, for low-copy genes, hybridization equilibrium may be reached after hybridization times much longer than the one commonly used (overnight, i.e., 15 h). Thus, hybridization signals could depend on kinetic properties of the probe, which may vary between different oligonucleotide probes immobilized on the same microarray. To validate this hypothesis, on-chip hybridization kinetics and duplex thermostability analysis were performed using oligonucleotide microarrays containing 50-mer probes corresponding to 10 mouse genes. We demonstrate that differences in hybridization kinetics between the probes exist and can influence the interpretation of expression data. In addition, we show that using on-chip hybridization kinetics, quantification of targets is feasible using calibration curves.     

Population variation of human mtDNA control region sequences detected by enzymatic amplification and sequence-specific oligonucleotide probes.

A method for detecting sequence variation of hypervariable segments of the mtDNA control region was developed. The technique uses hybridization of sequence-specific oligonucleotide (SSO) probes to DNA sequences that have been amplified by PCR. The nucleotide sequences of the two hypervariable segments of the mtDNA control region from 52 individuals were determined; these sequences were then used to define nine regions suitable for SSO typing. A total of 23 SSO probes were used to detect sequence variants at these nine regions in 525 individuals from five ethnic groups (African, Asian, Caucasian, Japanese, and Mexican). The SSO typing revealed an enormous amount of variability, with 274 mtDNA types observed among these 525 individuals and with diversity values, for each population, exceeding .95. For each of the nine mtDNA regions significant differences in the frequencies of sequence variants were observed between these five populations. The mtDNA SSO-typing system was successfully applied to a case involving individual identification of skeletal remains; the probability of a random match was approximately 0.7%. The potential useful applications of this mtDNA SSO-typing system thus include the analysis of individual identity as well as population genetic studies.     

Hybridization methods for DNA sequencing.

I have conducted a general analysis of the practicability of using oligonucleotide hybridization to sequence DNA. Any DNA sequence may be sequenced by hybridization with a complete panel of oligonucleotides. However, sequencing DNA segments over 2 kb long requires an unrealistic number of hybridization reactions. The optimal protocol is to hybridize 7-mer or 8-mer mixed oligonucleotide probes to immobilized DNA fragments 80 bp long: should this prove impractical, hybridization of labeled 270-bp fragments to immobilized mixed 10-mers is a potential alternative. Both protocols require no more experiments to sequence large regions of DNA than conventional m13-based sequencing and are much easier to automate, thus reducing the requirements for skilled personnel. In the ideal case, hybridization sequencing reduces the number of experiments required to sequence megabase DNA by 90%.     

PNA openers as a tool for direct quantification of specific targets in duplex DNA

We report a new approach for target quantification directly within DNA duplex. Our assay is based on the formation of a new biomolecular structure, the PD-loop. The approach takes advantage of a selective hybridization of a probe to double-stranded DNA (dsDNA), which is locally opened by a pair of bis-PNA oligomers. To optimize the technique, several experimental formats are tested with the use of PNA and oligonucleotide probes. The highest sensitivity is achieved when the hybridized probe is extended and multiply labeled with 125I-dCTP by DNA polymerase via strand displacement in the presence of single-strand binding (SSB) protein. In this case, the PNA-assisted probe hybridization combined with the method of multiphoton detection (MPD) allows to monitor sub-attomolar amounts of the HIV-1 target on the background of unrelated DNA at sub-nCi level of radioactivity. The developed robust methodology is highly discriminative to single mutations, thus being of practical use for DNA analysis.     

The F1 genes of the F1F0 ATP synthase from the acidophilic bacterium Thiobacillus ferrooxidans complement Escherichia coli F1unc mutants

Abstract Because of the allelic variations within the M protein gene ( emm gene) of group A streptococci, reliable typing of this important human pathogen can be accomplished by the use of emm gene-specific oligonucleotide probes. Two technical modifications (a reverse dot blot and a reverse line blot hybridization assay) of a novel approach for the type-specific identification of emm genes have been developed. Both procedures involved amplification of an emm gene by polymerase chain reaction. The non-radioactively labeled amplicon was subsequently hybridized to a membrane carrying an array of immobilized emm gene-specific oligonucleotide probes, thus allowing the simultaneous analysis of the gene polymorphism in a single hybridization reaction. The feasibility of these rapid and easy to perform methods was shown for the unequivocal identification of reference strains and clinical isolates belonging to 16 different M serotypes.     

Strategies for optimizing DNA hybridization on surfaces

Specific and predictable hybridization of the polynucleotide sequences to their complementary counterparts plays a fundamental role in the rational design of new nucleic acid nanodevices. Generally, nucleic acid hybridization can be performed using two major strategies, namely hybridization of DNA or RNA targets to surface-tethered oligonucleotide probes (solid-phase hybridization) and hybridization of the target nucleic acids to randomly distributed probes in solution (solution-phase hybridization). Investigations into thermodynamic and kinetic parameters of these two strategies showed that hybridization on surfaces is less favorable than that of the same sequence in solution. Indeed, the efficiency of DNA hybridization on surfaces suffers from three constraints: (1) electrostatic repulsion between DNA strands on the surface, (2) steric hindrance between tethered DNA probes, and (3) nonspecific adsorption of the attached oligonucleotides to the solid surface. During recent years, several strategies have been developed to overcome the problems associated with DNA hybridization on surfaces. Optimizing the probe surface density, application of a linker between the solid surface and the DNA-recognizing sequence, optimizing the pH of DNA hybridization solutions, application of thiol reagents, and incorporation of a polyadenine block into the terminal end of the recognizing sequence are among the most important strategies for enhancing DNA hybridization on surfaces.     

The organization of the evolutionarily conserved GATA/GACA repeats in the mouse genome

Simple repeated GATA and GACA sequences which were originally isolated from sex-specific snake satellite DNA have been found subsequently in all eukaryotes studied. The organization of these sequences within the mouse genome was investigated here by using synthetic oligonucleotide probes as a novel tool in comparison with conventional hybridization probes. Southern blot hybridization showed sex-specific patterns with both the (GATA)₄ and (GACA)₄ oligonucleotide probes, as previously described with conventional probes. The quantitative analysis of two mouse DNA phage libraries and of 25 isolated GATA-positive phage clones revealed intensive interspersion of GATA sequences with GACA, and with other repetitive and single-copy sequences. Ubiquitous interspersion and homogeneous genomic distribution of GATA and GACA sequences were confirmed by hybridization in situ of the oligonucleotide probes to metaphase chromosomes. The lengths of the GATA and GACA stretches were found to vary considerably in the individual phage clones. DNA inserts from 20 phages were assigned to autosomes and sex chromosomes and three genomic fragments were found to be confined to the Y chromosome. The organization of GATA and GACA sequences is discussed in the context of their evolutionary potential and possible conservation mechanisms.     

Earrings and padlocks for the double helix: topological labeling of duplex DNA

Concatenation of hybridization probe with DNA target is crucial for highly localized detection of targeted sequences and might also be used in various gene-therapy applications. Several approaches based on the attachment of a circular oligonucleotide to designated DNA sites have been proposed. Recently, earring-like probes provide a true topological linkage between a probe and the target, thus allowing the DNA labeling by essentially immobile tags. The latest development in this direction takes advantage of oligonucleotide uptake by supercoiled DNA and is an important step forward.     

Disposable DNA electrochemical sensor for hybridization detection

A disposable electrochemical sensor for the detection of short DNA sequences is described. Synthetic single-stranded oligonucleotides have been immobilized onto graphite screen printed electrodes with two procedures, the first involving the binding of avidinbiotinylated oligonucleotide and the second adsorption at a controlled potential. The probes were hybridized with different concentrations of complementary sequences. The formed hybrids on the electrode surface were evaluated by differential pulse voltammetry and chronopotentiometric stripping analysis using daunomycin hydrochloride as indicator of hybridization reaction. The probe immobilization step, the hybridization event and the indicator detection, have been optimized. The DNA sensor obtained by adsorption at a controlled potential was able to detect 1 microgram/ml of target sequence in the buffer solution using chronopotentiometric stripping analysis.     

A protocol for the in vitro selection of specific oligonucleotide probes for high-resolution DNA typing

The confident discrimination of nucleic acids that share a high degree of sequence identity is the major obstacle for the widespread applicability of multiplex DNA-based techniques. This diagnostic uncertainty originates in the insufficient specificity of hybridization, allowing cross-hybridization between unwanted probe-target combinations. Starting from a random mixture of oligonucleotides, we describe a protocol to selectively amplify the probes that bind to the target but not to the similar, unintended targets. The procedure involves five forward hybridizations to generate pools of probes with significant affinity, but not necessarily specificity, for the target. Specificity is then achieved during subtractive hybridization steps, where only probes having differential diagnostic performance are retained. Iterative hybridizations, cloning, sequencing and testing of the performance of selected probes can all be fully automated. Eight weeks are required for the full completion of a project composed of 40 probe-target pairs, even when targets share as much as 87% of sequence identity. While alternative, computer-assisted, rational oligonucleotide design may produce an uncertain outcome, the present protocol generates robust and specific probes suitable for a variety of multiplex, nucleic acid-based detection/typing platforms.     

Oligonucleotide primers,probes and molecular methods for the environmental monitoring of methanogenic archaea

For the identification and quantification of methanogenic archaea (methanogens) in environmental samples, various oligonucleotide probes/primers targeting phylogenetic markers of methanogens, such as 16S rRNA, 16S rRNA gene and the gene for the α‐subunit of methyl coenzyme M reductase (mcrA), have been extensively developed and characterized experimentally. These oligonucleotides were designed to resolve different groups of methanogens at different taxonomic levels, and have been widely used as hybridization probes or polymerase chain reaction primers for membrane hybridization, fluorescence in situ hybridization, rRNA cleavage method, gene cloning, DNA microarray and quantitative polymerase chain reaction for studies in environmental and determinative microbiology. In this review, we present a comprehensive list of such oligonucleotide probes/primers, which enable us to determine methanogen populations in an environment quantitatively and hierarchically, with examples of the practical applications of the probes and primers.     

Long oligonucleotide arrays on nylon for large-scale gene expression analysis

To date, most studies of multigenic expression patterns by long DNA array have used DNA fragments as probes. These probes are usually obtained as PCR products, and this represents a time-consuming and error-prone approach, requiring strict quality control. The present study examines the use of 40- and 70-mer synthetic oligonucleotides as probes for DNA array analysis with radioactive labeled targets. Design, spotting onto nylon filters, and hybridization conditions were determined and optimized. In this approach, the sensitivity and the specificity of the hybridization appear comparable to the conventional long DNA probes assay, permitting the analysis of small samples of approximately 1 microg total RNA. The long oligonucleotide array thus provides a very convenient method for the analysis of gene expression patterns in biological specimens and in clinical research.