Expression, gene cloning, and characterization of five novel phytases from four basidiomycete fungi: Peniophora lycii, Agrocybe pediades, a Ceriporia sp., and Trametes pubescens

Phytases catalyze the hydrolysis of phosphomonoester bonds of phytate (myo-inositol hexakisphosphate), thereby creating lower forms of myo-inositol phosphates and inorganic phosphate. In this study, cDNA expression libraries were constructed from four basidiomycete fungi (Peniophora lycii, Agrocybe pediades, a Ceriporia sp., and Trametes pubescens) and screened for phytase activity in yeast. One full-length phytase-encoding cDNA was isolated from each library, except for the Ceriporia sp. library where two different phytase-encoding cDNAs were found. All five phytases were expressed in Aspergillus oryzae, purified, and characterized. The phytases revealed temperature optima between 40 and 60 degrees C and pH optima at 5.0 to 6.0, except for the P. lycii phytase, which has a pH optimum at 4.0 to 5.0. They exhibited specific activities in the range of 400 to 1,200 U. mg, of protein(-1) and were capable of hydrolyzing phytate down to myo-inositol monophosphate. Surprisingly, (1)H nuclear magnetic resonance analysis of the hydrolysis of phytate by all five basidiomycete phytases showed a preference for initial attack at the 6-phosphate group of phytic acid, a characteristic that was believed so far not to be seen with fungal phytases. Accordingly, the basidiomycete phytases described here should be grouped as 6-phytases (EC 3.1.3.26).     

The type III secretion system is involved in the invasion and intracellular survival of Escherichia coli K1 in human brain microvascular endothelial cells

Two thermostable phytases were identified from Thai isolates of Aspergillus japonicus BCC18313 (TR86) and Aspergillus niger BCC18081 (TR170). Both genes of 1404 bp length, coding for putative phytases of 468 amino acid residues, were cloned and transferred into Pichia pastoris . The recombinant phytases, r-PhyA86 and r-PhyA170, were expressed as active extracellular, glycosylated proteins with activities of 140 and 100 U mL⁻¹, respectively. Both recombinant phytases exhibited high affinity for phytate but not for p -nitrophenyl phosphate. Optimal phytase activity was observed at 50 °C and pH 5.5. High thermostability, which is partly dependent on glycosylation, was demonstrated for both enzymes, as >50% activity was retained after heating at 100 °C for 10 min. The recombinant phytases also exhibited broad pH stability from 2.0 to 8.0 and are resistant to pepsin. In vitro digestibility tests suggested that r-PhyA86 and r-PhyA170 are at least as efficient as commercial phytase for hydrolyzing phytate in corn-based animal feed and are therefore suitable sources of phytase supplement.     

Phytase isozymes from Aspergillus niger NCIM 563 under solid state fermentation: Biochemical characterization and their correlation with submerged phytases

Aspergillus niger NCIM 563 produces dissimilar phytase isozymes under solid state and submerged fermentation conditions. Biochemical characterization and applications of phytase Phy III and Phy IV in SSF and their comparison with submerged fermentation Phy I and Phy III were studied. SSF phytases have a higher metabolic potential as compared to SmF. Phy I is tetramer and Phy II, III and IV are monomers. Phy I and IV have pH optima of 2.5 and Phy II and III have pH optima of 5.0 and 5.6, respectively. Phy I, III and IV exhibited very broad substrate specificity while Phy II was more specific for sodium phytate. SSF phytase is less thermostable as compared to SmF phytase. Phy I and II show homology with other known phytases while Phy III and IV show no homology with SmF phytases and any other known phytases from the literature suggesting their unique nature. This is the first report about differences among phytase produced under SSF and SmF by A. niger and this study provides basis for explanation of the stability and catalytic differences observed for these enzymes. Exclusive biochemical characteristics and multilevel application of SSF native phytases determine their efficacy and is exceptional.     

Diversity,abundance and characterization of ruminal cysteine phytases suggest their important role in phytate degradation

A novel class of cysteine phytase showing ability to degrade phytate has recently been isolated from rumen bacteria. To expand our knowledge of this enzyme class, a total of 101 distinct cysteine phytase gene fragments were identified from the ruminal genomic DNA of Bore goats and Holstein cows, and most of them shared low identities (< 50%) with known sequences. By phylogenetic analysis, these sequences were separated into three clusters that showed substantial diversity. The two most abundant cysteine phytase genes of goat rumens were cloned and their protein products were characterized. Four findings were revealed based on our results. (i) Compared with soil and water environment, where β‐propeller phytase is the most important phytate‐degrading enzyme, cysteine phytase is the major phytate‐degrading enzyme in the anaerobic ruminal environment. (ii) Cysteine phytase fragments in the rumen contents of goat and cow have the same diversity profile, although most of the sequences and their abundance differ in the two species. (iii) Each species has their respective high‐abundance genes, which may play major roles for phytate degradation. (iv) Compared with previously reported cysteine phytases that have pH optimum at 4.5, the pH optima of the two most abundant secreted goat cysteine phytases are 6.5 and 6.0, which are within the pH range found in the rumens. This study provides valuable information about the diversity, abundance and enzymatic properties of the ruminal cysteine phytases and emphasizes the important role(s) of these cysteine phytases probably in the terrestrial cycle of phosphorus.     

Biochemical characterization of cloned Aspergillus fumigatus phytase (phyA)

The gene for Aspergillus fumigatus phytase (phyA) was cloned and expressed in Pichia pastoris. The enzyme expressed was purified to near homogeneity using sequential ion-exchange chromatography and was characterized biochemically. Although A. fumigatus phytase shows 66.2% sequence homology with A. ficuum phytase, the most widely studied enzyme, the cloned phytase showed identical molecular weight and temperature optima profile to the benchmark phytase. The pH profile of activity and kinetic parameters, however, differed from A. ficuum phytase. The cloned enzyme contains the septapeptide RHGARYP motif, which is also identical to the active site motif of A. ficuum phytase. Chemical probing of the active site Arg residues using both cyclohexanedione and phenylglyoxal resulted in the inactivation of phytase. The cloned A. fumigatus phytase, however, was more resistant to phenylglyoxal-induced inactivation. Both cloned A. fumigatus and A. ficuum phytases were identically affected by cyclohexanedione. Both the thermal characterization data and kinetic parameters of cloned and expressed A. fumigatus phytase indicate that this biocatalyst is not superior to the benchmark enzyme. The sequence difference between A. fumigatus and A. ficuum phytase may explain why the former enzyme catalyzes poorly compared to the benchmark enzyme. In addition, differential sensitivity toward the Arg modifier, phenylglyoxal, indicates a different chemical environment at the active site for each of the phytases.     

Purification and physico-chemical characterisation of genetically modified phytases expressed in Aspergillus awamori

Two heterologous phytases from Aspergillus awamori and Aspergillus fumigatus obtained from submerged cultures of genetically modified fungal strains in addition to two commercially available phytase preparations (Allzyme and Natuphos phytases) were purified to homogeneity using a combination of ultrafiltration, gel filtration and ion exchange. The purified preparations were used in subsequent characterisation studies, in which Western Immunoblot analysis, pH and temperature optima, thermal stability and substrate specificity were assessed. A. fumigatus phyA phytase expressed in A. awamori exhibited activity over a broad pH range together with an increased temperature optimum, and slightly enhanced thermal stability compared to the other phytases tested, and is thus a promising candidate for animal feed applications. This particular phytase retains activity over a wide range of pH values characteristic of the digestive tract and could conceivably be more suited to the increasingly higher feed processing temperatures being utilised today, than the corresponding phytases from Aspergillus niger.     

A novel phytase from Yersinia rohdei with high phytate hydrolysis activity under low pH and strong pepsin conditions

Two novel phytase genes belonging to the histidine acid phosphatase family were cloned from Yersinia rohdei and Y. pestis and expressed in Pichia pastoris. Both the recombinant phytases had high activity at pH 1.5-6.0 (optimum pH 4.5) with an optimum temperature of 55 degrees C. Compared with the major commercial phytases from Aspergillus niger, Escherichia coli, and a potential commercial phytase from Y. intermedia, the Y. rohdei phytase was more resistant to pepsin, retained more activity under gastric conditions, and released more inorganic phosphorus (two to ten times) from soybean meal under simulated gastric conditions. These superior properties suggest that the Y. rohdei phytase is an attractive additive to animal feed. Our study indicated that, in order to better hydrolyze the phytate and release more inorganic phosphorus in the gastric passage, phytase should have high activity and stability, simultaneously, at low pH and high protease concentration.     

Optimization of the catalytic properties of Aspergillus fumigatus phytase based on the three-dimensional structure

Previously, we determined the DNA and amino acid sequences as well as biochemical and biophysical properties of a series of fungal phytases. The amino acid sequences displayed 49-68% identity between species, and the catalytic properties differed widely in terms of specific activity, substrate specificity, and pH optima. With the ultimate goal to combine the most favorable properties of all phytases in a single protein, we attempted, in the present investigation, to increase the specific activity of Aspergillus fumigatus phytase. The crystal structure of Aspergillus niger NRRL 3135 phytase known at 2.5 A resolution served to specify all active site residues. A multiple amino acid sequence alignment was then used to identify nonconserved active site residues that might correlate with a given favorable property of interest. Using this approach, Gln27 of A. fumigatus phytase (amino acid numbering according to A. niger phytase) was identified as likely to be involved in substrate binding and/or release and, possibly, to be responsible for the considerably lower specific activity (26.5 vs. 196 U x [mg protein](-1) at pH 5.0) of A. fumigatus phytase when compared to Aspergillus terreus phytase, which has a Leu at the equivalent position. Site-directed mutagenesis of Gln27 of A. fumigatus phytase to Leu in fact increased the specific activity to 92.1 U x (mg protein)(-1), and this and other mutations at position 27 yielded an interesting array of pH activity profiles and substrate specificities. Analysis of computer models of enzyme-substrate complexes suggested that Gln27 of wild-type A. fumigatus phytase forms a hydrogen bond with the 6-phosphate group of myo-inositol hexakisphosphate, which is weakened or lost with the amino acid substitutions tested. If this hydrogen bond were indeed responsible for the differences in specific activity, this would suggest product release as the rate-limiting step of the A. fumigatus wild-type phytase reaction.     

Engineering of phytase for improved activity at low pH

For industrial applications in animal feed, a phytase of interest must be optimally active in the pH range prevalent in the digestive tract. Therefore, the present investigation describes approaches to rationally engineer the pH activity profiles of Aspergillus fumigatus and consensus phytases. Decreasing the negative surface charge of the A. fumigatus Q27L phytase mutant by glycinamidylation of the surface carboxy groups (of Asp and Glu residues) lowered the pH optimum by ca. 0.5 unit but also resulted in 70 to 75% inactivation of the enzyme. Alternatively, detailed inspection of amino acid sequence alignments and of experimentally determined or homology modeled three-dimensional structures led to the identification of active-site amino acids that were considered to correlate with the activity maxima at low pH of A. niger NRRL 3135 phytase, A. niger pH 2.5 acid phosphatase, and Peniophora lycii phytase. Site-directed mutagenesis confirmed that, in A. fumigatus wild-type phytase, replacement of Gly-277 and Tyr-282 with the corresponding residues of A. niger phytase (Lys and His, respectively) gives rise to a second pH optimum at 2.8 to 3.4. In addition, the K68A single mutation (in both A. fumigatus and consensus phytase backbones), as well as the S140Y D141G double mutation (in A. fumigatus phytase backbones), decreased the pH optima with phytic acid as substrate by 0.5 to 1.0 unit, with either no change or even a slight increase in maximum specific activity. These findings significantly extend our tools for rationally designing an optimal phytase for a given purpose.     

Production, purification and properties of microbial phytases

Phytases (myo-inositol hexakisphosphate phosphohydrolase, EC 3.1.3.8) catalyse the release of phosphate from phytate (mycoinositol hexakiphosphate). Several cereal grains, legumes and oilseeds, etc., store phosphorus as phytate. Environmental pollution due to the high-phosphate manure, resulting in the accumulation of P at various locations has raised serious concerns. Phytases appear of significant value in effectively controlling P pollution. They can be produced from a host of sources including plants, animals and micro-organisms. Microbial sources, however, are promising for their commercial exploitations. Strains of Aspergillus sp., chiefly A. ficuum and A. niger have most commonly been employed for industrial purposes. Phytases are considered as a monomeric protein, generally possessing a molecular weight between 40 and 100 kDa. They show broad substrate specificity and have generally pH and temperature optima around 4.5-6.0 and 45-60 degrees C. The crystal structure of phytase has been determined at 2.5 A resolution. Immobilization of phytase has been found to enhance its thermostability. This article reviews recent trends on the production, purification and properties of microbial phytases.     

Purification and characterisation of an acid phosphatase with phytase activity from Mucor hiemalis Wehmer

An acid phosphatase with phytase activity, produced by Mucor hiemalis Wehmer, was purified to homogeneity by a combination of anion exchange, gel filtration and hydrophobic interaction chromatography. The monomeric, glycosylated enzyme displayed maximum activity at 55 degrees C and pH 5.0-5.5. When compared to commercialised products, the enzyme is more thermostable (80 degrees C, 5min), displays a broader pH versus activity profile and greater stability under simulated digestive tract conditions. Unlike commercial phytases, the Mucor enzyme should retain some activity in the small intestine as well as in the stomach, facilitating a longer duration of action and hence more extensive substrate hydrolysis. Substrate specificity studies and protein database similarity searching using mass spectrometry-derived sequence data indicate that the enzyme is an acid phosphatase with activity on phytate. Cocktails containing acid phosphatases in combination with true phytases have been shown to promote more extensive phytate degradation than do true phytases alone. This, coupled to the enzyme's functionally relevant physicochemical characteristics, suggests its likely suitability for inclusion in second generation phytase cocktails for application in animal feed.     

Shifting the pH profile of Aspergillus niger PhyA phytase to match the stomach pH enhances its effectiveness as an animal feed additive

Environmental pollution by phosphorus from animal waste is a major problem in agriculture because simple-stomached animals, such as swine, poultry, and fish, cannot digest phosphorus (as phytate) present in plant feeds. To alleviate this problem, a phytase from Aspergillus niger PhyA is widely used as a feed additive to hydrolyze phytate-phosphorus. However, it has the lowest relative activity at the pH of the stomach (3.5), where the hydrolysis occurs. Our objective was to shift the pH optima of PhyA to match the stomach condition by substituting amino acids in the substrate-binding site with different charges and polarities. Based on the crystal structure of PhyA, we prepared 21 single or multiple mutants at Q50, K91, K94, E228, D262, K300, and K301 and expressed them in Pichia pastoris yeast. The wild-type (WT) PhyA showed the unique bihump, two-pH-optima profile, whereas 17 mutants lost one pH optimum or shifted the pH optimum from pH 5.5 to the more acidic side. The mutant E228K exhibited the best overall changes, with a shift of pH optimum to 3.8 and 266% greater (P < 0.05) hydrolysis of soy phytate at pH 3.5 than the WT enzyme. The improved efficacy of the enzyme was confirmed in an animal feed trial and was characterized by biochemical analysis of the purified mutant enzymes. In conclusion, it is feasible to improve the function of PhyA phytase under stomach pH conditions by rational protein engineering.     

Shifting the pH Profile of Aspergillus niger PhyA Phytase To Match the Stomach pH Enhances Its Effectiveness as an Animal Feed Additive

Environmental pollution by phosphorus from animal waste is a major problem in agriculture because simple-stomached animals, such as swine, poultry, and fish, cannot digest phosphorus (as phytate) present in plant feeds. To alleviate this problem, a phytase from Aspergillus niger PhyA is widely used as a feed additive to hydrolyze phytate-phosphorus. However, it has the lowest relative activity at the pH of the stomach (3.5), where the hydrolysis occurs. Our objective was to shift the pH optima of PhyA to match the stomach condition by substituting amino acids in the substrate-binding site with different charges and polarities. Based on the crystal structure of PhyA, we prepared 21 single or multiple mutants at Q50, K91, K94, E228, D262, K300, and K301 and expressed them in Pichia pastoris yeast. The wild-type (WT) PhyA showed the unique bihump, two-pH-optima profile, whereas 17 mutants lost one pH optimum or shifted the pH optimum from pH 5.5 to the more acidic side. The mutant E228K exhibited the best overall changes, with a shift of pH optimum to 3.8 and 266% greater (P < 0.05) hydrolysis of soy phytate at pH 3.5 than the WT enzyme. The improved efficacy of the enzyme was confirmed in an animal feed trial and was characterized by biochemical analysis of the purified mutant enzymes. In conclusion, it is feasible to improve the function of PhyA phytase under stomach pH conditions by rational protein engineering.     

Expression of an Aspergillus niger phytase gene (phyA) in Saccharomyces cerevisiae

Phytase improves the bioavailability of phytate phosphorus in plant foods to humans and animals and reduces phosphorus pollution of animal waste. Our objectives were to express an Aspergillus niger phytase gene (phyA) in Saccharomyces cerevisiae and to determine the effects of glycosylation on the phytase's activity and thermostability. A 1.4-kb DNA fragment containing the coding region of the phyA gene was inserted into the expression vector pYES2 and was expressed in S. cerevisiae as an active, extracellular phytase. The yield of total extracellular phytase activity was affected by the signal peptide and the medium composition. The expressed phytase had two pH optima (2 to 2.5 and 5 to 5.5) and a temperature optimum between 55 and 60 degrees C, and it cross-reacted with a rabbit polyclonal antibody against the wild-type enzyme. Due to the heavy glycosylation, the expressed phytase had a molecular size of approximately 120 kDa and appeared to be more thermostable than the commercial enzyme. Deglycosylation of the phytase resulted in losses of 9% of its activity and 40% of its thermostability. The recombinant phytase was effective in hydrolyzing phytate phosphorus from corn or soybean meal in vitro. In conclusion, the phyA gene was expressed as an active, extracellular phytase in S. cerevisiae, and its thermostability was affected by glycosylation.     

Isolation, Characterization, Molecular Gene Cloning, and Sequencing of a Novel Phytase from Bacillus subtilis

The Bacillus subtilis strain VTT E-68013 was chosen for purification and characterization of its excreted phytase. Purified enzyme had maximal phytase activity at pH 7 and 55°C. Isolated enzyme required calcium for its activity and/or stability and was readily inhibited by EDTA. The enzyme proved to be highly specific since, of the substrates tested, only phytate, ADP, and ATP were hydrolyzed (100, 75, and 50% of the relative activity, respectively). The phytase gene (phyC) was cloned from the B. subtilis VTT E-68013 genomic library. The deduced amino acid sequence (383 residues) showed no homology to the sequences of other phytases nor to those of any known phosphatases. PhyC did not have the conserved RHGXRXP sequence found in the active site of known phytases, and therefore PhyC appears not to be a member of the phytase subfamily of histidine acid phosphatases but a novel enzyme having phytase activity. Due to its pH profile and optimum, it could be an interesting candidate for feed applications.     

Fungal phyA gene expressed in potato leaves produces active and stable phytase

Fungal phyA gene from Aspergillus ficuum (niger) was cloned and expressed in potato leaves. The recombinant enzyme was stable and catalytically active. The expressed protein in the leaves of the dicotyledonous plant retained most physical and catalytic properties of the benchmark A. ficuum phytase. The expressed enzyme was, however, 15% less glycosylated than the native phytase. The usual bi-hump pH optima profile, which is characteristic of the fungal phytase, was altered; however, the pH optimum at 5.0 was unchanged for phytate and at 4.0 for synthetic substrate p-nitrophenyl phosphate. The temperature was, however, unchanged. The expressed phytase was found to be as sensitive as the native enzyme to the inhibitory action of pseudo substrate, myo-inositol hexasulfate, while losing about 90% of the activity at 20 microM inhibitor concentration. Similar to the benchmark phytase, the expressed phytase in leaves was completely inactivated by Arg modifier phenylglyoxal at 60 nM. In addition, the expressed phytase in the leaves was inhibited by antibody raised against a 20-mer internal peptide, which is present on the surface of the molecule as shown by the X-ray deduced 3D structure of fungal phytase. Taken together, the biochemical evidences indicate that fungal phytase when cloned and expressed in potato leaves produces a stable and active biocatalyst. 'Biofarming,' therefore, is an alternative way to produce functional hydrolytic enzymes as exemplified by the expression of A. ficuum (niger) phyA gene in potato leaf.     

Exchanging the active site between phytases for altering the functional properties of the enzyme

By using a novel consensus approach, we have previously managed to generate a fully synthetic phytase, consensus phytase-1, that was 15-26 degrees C more thermostable than the parent fungal phytases used in its design (Lehmann et al., 2000). We now sought to use the backbone of consensus phytase-1 and to modify its catalytic properties. This was done by replacing a considerable part of the active site (i.e., all the divergent residues) with the corresponding residues of Aspergillus niger NRRL 3135 phytase, which displays pronounced differences in specific activity, substrate specificity, and pH-activity profile. For the new protein termed consensus phytase-7, a major - although not complete - shift in catalytic properties was observed, demonstrating that rational transfer of favorable catalytic properties from one phytase to another is possible by using this approach. Although the exchange of the active site was associated with a 7.6 degrees C decrease in unfolding temperature (Tm) as measured by differential scanning calorimetry, consensus phytase-7 still was >7 degrees C more thermostable than all wild-type ascomycete phytases known to date. Thus, combination of the consensus approach with the selection of a "preferred" active site allows the design of a thermostabilized variant of an enzyme family of interest that (most closely) matches the most favorable catalytic properties found among its family members.     

From DNA sequence to improved functionality: using protein sequence comparisons to rapidly design a thermostable consensus phytase

Naturally-occurring phytases having the required level of thermostability for application in animal feeding have not been found in nature thus far. We decided to de novo construct consensus phytases using primary protein sequence comparisons. A consensus enzyme based on 13 fungal phytase sequences had normal catalytic properties, but showed an unexpected 15-22 degrees C increase in unfolding temperature compared with each of its parents. As a first step towards understanding the molecular basis of increased heat resistance, the crystal structure of consensus phytase was determined and compared with that of Aspergillus niger phytase. Aspergillus niger phytase unfolds at much lower temperatures. In most cases, consensus residues were indeed expected, based on comparisons of both three-dimensional structures, to contribute more to phytase stabilization than non-consensus amino acids. For some consensus amino acids, predicted by structural comparisons to destabilize the protein, mutational analysis was performed. Interestingly, these consensus residues in fact increased the unfolding temperature of the consensus phytase. In summary, for fungal phytases apparently an unexpected direct link between protein sequence conservation and protein stability exists.     

Biochemical properties and substrate specificities of alkaline and histidine acid phytases

Phytases are a special class of phosphatase that catalyze the sequential hydrolysis of phytate to less-phosphorylated myo-inositol derivatives and inorganic phosphate. Phytases are added to animal feedstuff to reduce phosphate pollution in the environment, since monogastric animals such as pigs, poultry, and fish are unable to metabolize phytate. Based on biochemical properties and amino acid sequence alignment, phytases can be categorized into two major classes, the histidine acid phytases and the alkaline phytases. The histidine acid phosphatase class shows broad substrate specificity and hydrolyzes metal-free phytate at the acidic pH range and produces myo-inositol monophosphate as the final product. In contrast, the alkaline phytase class exhibits strict substrate specificity for the calcium–phytate complex and produces myo-inositol trisphosphate as the final product. This review describes recent findings that present novel viewpoints concerning the molecular basis of phytase classification.     

Biochemical Characterization of Fungal Phytases (myo-Inositol Hexakisphosphate Phosphohydrolases): Catalytic Properties

Supplementation with phytase is an effective way to increase the availability of phosphorus in seed-based animal feed. The biochemical characteristics of an ideal phytase for this application are still largely unknown. To extend the biochemical characterization of wild-type phytases, the catalytic properties of a series of fungal phytases, as well as Escherichia coli phytase, were determined. The specific activities of the fungal phytases at 37°C ranged from 23 to 196 U · (mg of protein)⁻¹, and the pH optima ranged from 2.5 to 7.0. When excess phytase was used, all of the phytases were able to release five phosphate groups of phytic acid (myo-inositol hexakisphosphate), which left myo-inositol 2-monophosphate as the end product. A combination consisting of a phytase and Aspergillus niger pH 2.5 acid phosphatase was able to liberate all six phosphate groups. When substrate specificity was examined, the A. niger, Aspergillus terreus, and E. coli phytases were rather specific for phytic acid. On the other hand, the Aspergillus fumigatus, Emericella nidulans, and Myceliophthora thermophila phytases exhibited considerable activity with a broad range of phosphate compounds, including phenyl phosphate, p-nitrophenyl phosphate, sugar phosphates, α- and β-glycerophosphates, phosphoenolpyruvate, 3-phosphoglycerate, ADP, and ATP. Both phosphate liberation kinetics and a time course experiment in which high-performance liquid chromatography separation of the degradation intermediates was used showed that all of the myo-inositol phosphates from the hexakisphosphate to the bisphosphate were efficiently cleaved by A. fumigatus phytase. In contrast, phosphate liberation by A. niger or A. terreus phytase decreased with incubation time, and the myo-inositol tris- and bisphosphates accumulated, suggesting that these compounds are worse substrates than phytic acid is. To test whether broad substrate specificity may be advantageous for feed application, phosphate liberation kinetics were studied in vitro by using feed suspensions supplemented with 250 or 500 U of either A. fumigatus phytase or A. niger phytase (Natuphos) per kg of feed. Initially, phosphate liberation was linear and identical for the two phytases, but considerably more phosphate was liberated by the A. fumigatus phytase than by the A. niger phytase at later stages of incubation.