Fluorescent labeling of cysteinyl residues to facilitate electrophoretic isolation of proteins suitable for amino-terminal sequence analysis

A protein labeling procedure which enables detection of subpicomole quantities of proteins on sodium dodecyl sulfate (SDS)-polyacrylamide gels is described. Proteins are rendered fluorescent by reduction of disulfide bonds with dithiothreitol followed by alkylation with 5-N-[(iodoacetamidoethyl)amino]naphthalene-1-sulfonic acid (5-I-AEDANS) or 5-iodoacetamido-fluorescein. Labeling is performed prior to electrophoresis, thus eliminating the need for staining with dyes and destaining after electrophoresis. As little as 375 fmol (25 ng) of prelabeled bovine serum albumin can be readily visualized after electrophoresis. Bands are still visible after electrophoretic transfer to nitrocellulose. Simultaneous labeling of proteins in complex mixtures is possible using this technique. This includes cysteine containing proteins of disrupted Newcastle disease virus. The magnitudes of the molecular weight increases which occur upon labeling reflect the cysteine contents of proteins. The mode of chemical modification for the prelabeling procedure was chosen because of its compatibility with analytical techniques, such as amino acid analysis, peptide mapping, or sequence analysis, which may be applied to the protein after electroelution from SDS-acrylamide gels. It replaces the need for reduction and carboxymethylation prior to these analytical procedures. Protein-sequence analysis of prelabeled bovine serum albumin, including samples electroeluted from SDS-acrylamide gels, has justified the choice of this method to facilitate isolation of proteins for sequence analysis. Equivalent sequence data were obtained with reduced bovine serum albumin S-alkylated with iodoacetic acid or 5-I-AEDANS.     

Synchrotron radiation for direct analysis of metalloproteins on electrophoresis gels

Metalloproteomics requires analytical techniques able to assess and quantify the inorganic species in metalloproteins. The most widely used methods are hyphenated techniques, based on the coupling of a high resolution chromatographic method with a high sensitivity method for metal analysis in solution. An alternative approach is the use of methods for solid sample analysis, combining metalloprotein separation by gel electrophoresis and direct analysis of the gels. Direct methods are based on beam analysis, such as lasers, ion beams or synchrotron radiation beams. The aim of this review article is to present the main features of synchrotron radiation based methods and their applications for metalloprotein analysis directly on electrophoresis gels. Synchrotron radiation X-ray fluorescence has been successfully employed for sensitive metal identification, and X-ray absorption spectroscopy for metal local structure speciation in proteins. Synchrotron based methods will be compared to ion beam and mass spectrometry for direct analysis of metalloproteins in electrophoresis gels.     

Conditions for reproducible detection of calmodulin and S100 beta in immunoblots

The conditions used in some immunoblot procedures can fail to detect calmodulin, S100 proteins, and other proteins with similar physical properties. We describe here some of the basis of this difficulty, and provide an immunoblot protocol that allows the rapid and reproducible detection of calmodulin and S100 beta in crude biological samples. These proteins are rapidly transferred from sodium dodecyl sulfate-polyacrylamide gels to membrane matrices, and retention on the matrix is enhanced by a glutaraldehyde fixation step. Either nitrocellulose or a positively charged membrane filter (ZetaProbe) can be used as the immobilizing matrix. By combining microslab gel electrophoresis, 30 min electrophoretic transfer, and glutaraldehyde fixation of nitrocellulose paper, an immunoblot analysis can be done in an 8-hr day.     

Optimization of the first dimension for separation by two-dimensional gel electrophoresis of basic proteins from human brain tissue

A major cause of poor resolution in the alkaline pH range of two-dimensional electrophoresis (2-DE) gels is unsatisfactory separation of basic proteins in the first dimension. We have compared methods for the separation of basic proteins in the isoelectric focusing dimension of human brain proteins. The combined use of anodic cup-loading and the hydroxyethyldisulphide containing solution (DeStreak) produced better resolution in both analytical and micropreparative protein loaded 2-DE gels than the other methods investigated.     

An improved mechanically durable electrophoresis gel matrix that is fully compatible with fluorescence-based protein detection technologies

Unfortunately, conventional large-format polyacrylamide gels are mechanically fragile, often tearing during the subsequent manipulations required for visualization of the proteins. This problem is compounded when large-format two-dimensional gels are subjected to multiple staining procedures in order to detect different classes of proteins, such as total protein, phosphoproteins, and glycoproteins. A mechanically durable liquid polyacrylamide-based matrix has been developed that, upon polymerization, facilitates the handling of one-dimensional and two-dimensional gels. The matrix, referred to as Rhinohide liquid acrylamide, is stable as a refrigerated solution for up to one year, and forms a polymer-reinforced polyacrylamide gel suitable for electrophoresis, upon addition of catalysts. The matrix is superior to previously reported durable gel matrices in that it does not cause distortion of high-molecular-weight bands and does not suffer from other spot morphology artifacts, such as doubling of protein spots in the molecular weight dimension. The matrix is particularly valuable for the analysis of proteins applying multiple applications of fluorescent dyes, as required with serial staining of proteins for phosphorylation, glycosylation, and total protein expression, using Pro-Q Diamond phosphoprotein stain, Pro-Q Emerald glycoprotein stain and SYPRO Ruby protein gel stain, respectively.     

Use of "submarine" gel electrophoresis for running multiple two-dimensional protein gels

An apparatus commonly used for the electrophoresis of submerged agarose gels was used to separate proteins in the second dimension, after isoelectric focusing in the first dimension. Multiple second-dimension gels were stacked one above the other and run horizontally, submerged in the sodium dodecyl sulfate-containing Laemmli buffer system. The reproducibility of the gels run under these conditions is remarkable and eliminates the need for individual vertical electrophoresis units for routine analysis. The units for submerged horizontal gel electrophoresis are easily made or are inexpensively available commercially.     

Optimal replication and the importance of experimental design for gel-based quantitative proteomics

Quantitative proteomic studies, based on two-dimensional gel electrophoresis, are commonly used to find proteins that are differentially expressed between samples or groups of samples. These proteins are of interest as potential diagnostic or prognostic biomarkers, or as proteins associated with a trait. The complexity of proteomic data poses many challenges, so while experiments may reveal proteins that are differentially expressed, these are often not significant when subjected to rigorous statistical analysis. However, this can be addressed through appropriate experimental design. A good experimental design considers the impact of different sources of variation, both analytical and biological, on the statistical importance of the results. The design should address the number of samples that must be analyzed and the number of replicate gels per sample, in the context of a particular minimum difference that one is seeking to achieve. In this study, we explore the ways to improve the quality of protein expression data from 2-DE gels, and describe an approach for defining the number of samples required and the number of gels per sample. It has been developed for the simplest of situations, two groups of samples with variation at two levels: between samples and between gels. This approach will also be useful as a guide for more complex designs involving more than two groups of samples. We describe some Internet-accessible tools that can assist in the design of proteomic studies.     

Sequential two-dimensional and acetic acid/urea/Triton X-100 gel electrophoresis of proteins

A method is described which combines the resolving power of two-dimensional gel electrophoresis with that of acetic acid/urea/Triton X-100 gel electrophoresis, avoiding the necessity of eluting protein from the gels at any step of the procedure. The combination of electrophoretic separation on the basis of charge, mass, and hydrophobic properties of the proteins has the potential of resolving modified forms and isoforms present in very complex protein populations. The technique can be used for analytical purposes, or it may be scaled up to yield microgram amounts of highly purified proteins. The resolution obtained by tandem application of nonequilibrium pH gradient electrophoresis, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and polyacrylamide gel electrophoresis in the presence of nonionic detergent was evaluated using crude nuclear proteins of the nematode Caenorhabditis elegans.     

Detection of protein-protein interactions and a group of immunoglobulin G-associated minor proteins in human plasma by nondenaturing and denaturing two-dimensional gel electrophoresis

The dissociation of noncovalently associated protein-protein complexes in human plasma was examined by comparing two-dimensional gel electrophoresis (2-DE) patterns obtained in two different electrophoretic conditions. A type I 2-DE pattern was obtained running nondenaturing isoelectric focusing (IEF) followed by nondenaturing gel electrophoresis and a type II 2-DE pattern was nondenaturing IEF followed by sodium dodecyl sulfate gel electrophoresis. Micro-sized gels (internal diameter(id) 1.3 x 35 mm polyacrylamide IEF gels and 38 x 38 x 1 mm polyacryamide slab gels) were used to follow the dissociation processes of major plasma proteins. Larger gel sizes (id 3.4 x 160 mm agarose IEF gels and 160 x 120 x 2.8 mm polyacrylamide slab gels) were used to detect minor plasma proteins dissociated from major proteins. About 110 spots, which have not been detected on type I (nondenaturing) 2-D gels, newly appeared on type II large-sized 2-D gels at molecular masses smaller than 67 kDa. Some of these spots had been analyzed and identified, but about 70 minor spots (isoelectric point 5.5-7.5 and relative molecular mass 8-45 kDa) were detected for the first time by applying large volumes of human plasma samples to the large type II 2-D gels. These minor spots could be concentrated on type II 2-D gels by enriching the immunoglobulin G (IgG) fraction under nondenaturing conditions, and they disappeared when IgG was removed from the fraction. These results strongly suggest that many of the minor spots newly detected were bound to IgG in physiological conditions.     

Isolation of yeast ribosomal proteins L3 and L2 for immunological studies

We report on a rapid method for the isolation and purification of the yeast ribosomal proteins L3 and L2 using a simple instrumentation. Preparative dodecyl sulfate polyacrylamide gel electrophoresis was applied to the separation of cytoplasmatic ribosomal proteins of the large subunit from the yeast Saccharomyces cerevisiae. The polypeptides were removed from gel slices by electrophoretic elution. Subsequent analytical electrophoresis showed groups of proteins in all but two fractions. The latter were further analysed by a two-dimensional gel electrophoresis system which disclosed the purity of two polypeptides. They were identified as L3 and L2. Their molecular masses were 51.5 and 44 kDa as estimated from the gels. A possible application to the isolation of other yeast ribosomal proteins is discussed. An antiserum against the polypeptide L3 was raised in a rabbit. Applying an enzyme-linked immunosorbent assay (ELISA) we were able to determine the relative antibody concentration. Its specificity was demonstrated by immunoblotting.     

Electrophoresis of small proteins in highly concentrated and crosslinked polyacrylamide gradient gels

A high concentration (40%) of acrylamide plus N,N′-methylenebisacrylamide combined with a high level of crosslinking (12.5%) yielded clear gels capable of restricting the passage of small proteins. This gel composition was chosen in preference to other combinations, in particular those producing opaque gels which have larger pore sizes and which provide a reduced sieving effect. Gradient gels were prepared in which the gel concentration rose from 3 to 40% and the degree of crosslinking increased from 4 to 12.5%. Such gels were suitable for fractionating crude, unreduced, and uncharacterized extracts containing proteins ranging in molecular size from 10,000 to several million daltons under conditions where all proteins are retained on the gel even after prolonged electrophoresis. The gels yielded zones which were of improved sharpness and resolution compared with gels of lower concentration and degree of crosslinking, and can be used to provide an estimate of molecular size. Examples of the use of HX gradient gels included both anodic and cathodic electrophoresis at pH 8.3 and 3.1, respectively, of serum and cereal-grain proteins and a partial enzymic hydrolysate of serum albumin.     

SDS聚丙烯酰胺凝胶电泳快速染色新方法的研究

通过几种金融盐溶液对SDS聚丙烯酰胺凝胶电泳染色的实验表明,0.25mol/L的CaCl2和MgCl2溶液能够对蛋白质进行有效的染色,经这2种溶液染色的蛋白质都能够从凝胶中洗脱回收。尤其是CaCl2法灵敏度更高,而且蛋白质条带形成之后也十分稳定,所以在运用制备电泳纯化蛋白质时这种新的染色方法较适用。     

Staining properties of bovine low molecular weight hydrophobic surfactant proteins after polyacrylamide gel electrophoresis.

Reports describing polyacrylamide gel electrophoresis patterns of bovine hydrophobic surfactant proteins are not consistent. In this study, we found unusual staining characteristics of these proteins that may explain some of these inconsistencies. Low molecular weight surfactant proteins extracted from bronchoalveolar lavage with organic solvent are partially delipidated with Sephadex LH-20 chromatography using chloroform and methanol. Fractions from the first protein peak are dried under nitrogen then subjected to SDS electrophoresis on 20% polyacrylamide gels. Under nonreducing conditions, silver staining identifies 5- and 26-kDa bands, and Coomassie blue identifies 6-, 12-, and 26-kDa bands. When gels are stained with Coomassie blue then silver, the 5- and 26-kDa bands stain with silver and 6- and 12-kDa bands remain stained with Coomassie blue. If gels are first stained with silver then Coomassie blue, similar results occur. We modified the silver staining protocol by treating gels with dithiothreitol or 2-mercaptoethanol after electrophoresis. With this modification, 5-, 6-, 12-, 26-, and also 17-kDa bands are identifiable. Using the modified protocol and restaining gels previously stained with silver, 6-, 12-, and 17-kDa bands that were not identified previously all became visible. In further experiments, protein bands of 6-, 12-, and 26-kDa that were identified by Coomassie blue were electroeluted under nonreducing conditions. After electrophoresis of the eluted 26-kDa protein, bands of 17-, and 26-kDa under nonreducing, and 8-kDa only under reducing conditions, were apparent by using the modified silver protocol.(ABSTRACT TRUNCATED AT 250 WORDS)     

Direct chemiluminescent imaging detection of human serum proteins in two-dimensional polyacrylamide gel electrophoresis

A novel chemiluminescence (CL)-based imaging method capable of directly detecting proteins in polyacrylamide gels after electrophoresis is proposed. Human serum proteins are presently detected by a direct CL imaging method after native 2-D PAGE. As a consequence, some proteins, including haptoglobin (Hp), Hp precursor, hemopexin (Hpx) precursor, Ig alpha-1 chain C region, and Complement C3 precursor can be detected and identified by MS and MS/MS techniques. These proteins are all acute phase proteins, which have been defined as biomarkers for certain diseases. Moreover, serum proteins from healthy people and cirrhotic patients were analyzed. A decrease in Hp spots for cirrhotic patients could be confirmed. The CL imaging conditions were optimized, including the concentrations of H(2)O(2) and luminol. The process of CL detection of proteins is simple, and there is no need for specialized equipment. In comparison with the traditional CBB-R250 staining method, the detection sensitivity was improved and the detection period decreased about 70 times. Hence, this technique possesses potentials as a rapid, convenient, and inexpensive analytical technique for protein detection and for the diagnosis of diseases.     

Preliminary analysis of the cauliflower mitochondrial proteome

Purified cauliflower (Brassica oleracea var. botrytis) mitochondrial proteins fractionated into soluble, membrane, integral membrane and peripheral membrane samples were analyzed by 2D- PAGE (isoelectric focusing/ SDS polyacrylamide gel electrophoresis). 2D gels patterns were compared using the Imager Master 2D Elite software. 561 silver stained protein spots were resolved after electrophoresis under standard conditions of a whole protein extract. In the soluble fraction a prevalent number of more intense protein spots was observed. The cauliflower protein 2D patterns resembled Arabidopsis thaliana 2D patterns. The two protein spots selected which occupied a similar isoelectric point positions on both gels represented the same proteins as revealed by ESI-MS analysis of cauliflower proteins. The third selected spot belongs to unidentified proteins. The comparative analysis of mitochondrial suborganellar fractions proved the usefulness of this approach.     

Barley pathogenesis-related proteins with fungal cell wall lytic activity inhibit the growth of yeasts.

Proteins from intercellular fluid extracts of chemically stressed barley (Hordeum vulgare L.) leaves were separated by native polyacrylamide gel electrophoresis at alkaline or acid pH. Polyacrylamide gels contained Saccharomyces cerevisiae (bakers' yeast) or Schizosaccharomyces pombe (fission yeast) crude cell walls for assaying yeast wall lysis. In parallel, gels were overlaid with a suspension of yeasts for assaying growth inhibition by pathogenesis-related proteins. The same assays were also performed with proteins separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis under nonreducing conditions. In alkaline native polyacrylamide gels, only one band corresponding to yeast cell wall lytic activity was found to be inhibitory to bakers' yeast growth, whereas in acidic native polyacrylamide gels one band inhibited the growth of both yeasts. Under denaturing nonreducing conditions, one band of 19 kD inhibited the growth of both fungi. The 19-kD band corresponded to a basic protein after two-dimensional gel analysis. The 19-kD protein with yeast cell wall lytic activity and inhibitory to both yeasts was found to be different from previously reported barley chitosanases that were lytic to fungal spores. It could be different from other previously reported lytic antifungal activities related to pathogenesis-related proteins.     

Of matrices and men

Matrices used in modern electrokinetic techniques are surveyed. They are essentially three: cellulose acetate, agarose and polyacrylamide gels. The use of cellulose acetate is confined mostly to analyses in clinical chemistry labs. The properties of agarose are discussed, in particular its capacity of forming large-pore structures via supercoiling, i.e. formation of suprafibers with average radii of approximately 20-25 nm. Several modified agaroses are reviewed, in particular the SeaPlaque, SeaPrep, NuSieve, NuFix, Seakem and Isogel brands and a composite agarose-polyacrylamide matrix, quite popular in the seventies for DNA and RNA separations. The field of polyacrylamide gels seems to be bursting, with the large number of crosslinkers described, imparting special properties to such matrices. The properties of new, modified acrylamide monomers, little known in the field of electrophoresis, are evaluated; in particular: trisacryl gels, hydroxyalkyl methacrylate gels and acryloylmorpholine-bisacrylylpiperazine gels, the latter formed by amphiphilic monomers, highly resistant to alkaline hydrolysis. The properties and formulas of a host of acidic and basic acrylamido derivatives (11 of them) used as buffers and titrants for isoelectric focusing in immobilized pH gradients are reviewed here for the first time. The review culminates with a glimpse at a new generation of amphiphatic matrices, such as HydroLink and 'shielded hydrophobic phase' gels, which appear to be the latest developments in the fields of electrophoresis and chromatography, respectively.     

Use of a Western blotting technique in the purification of a cysteine proteinase inhibitor

In Western blotting procedures, proteins are resolved in sodium dodecyl sulfate-polyacrylamide gels with subsequent electrophoretic transfer onto nitrocellulose membranes. Although this procedure is generally employed as an analytical technique for assessing interactions of proteins with antibodies, the present report describes the use of Western blotting as a preparative procedure in the purification of a biologically active proteinase inhibitor from the cellular slime mold, Dictyostelium discoideum. The feasibility of using Western blotting for inhibitor purification depended upon the unique stability properties of the inhibitor under denaturing conditions.     

Multivariate data analysis of two-dimensional gel electrophoresis protein patterns from few samples

One application of 2D gel electrophoresis is to reveal differences in protein pattern between two or more groups of individuals, attributable to their group membership. Multivariate data analytical methods are useful in pinpointing the spots relevant for discrimination by focusing not only on single spot differences, but on the covariance structure between proteins. However, their outcome is dependent on data scaling, and they may fail in producing valid multivariate models due to the much higher number of "irrelevant" spots present in the gels. The case where only few gels are available and where the aim is to find as many as possible of the group-dependent proteins seems particularly difficult to handle. The present paper investigates such a case regarding the effect of scaling and of prefiltering by univariate nonparametric statistics on the selection of spots. Besides, a modified 'autoscaling' of the full data set based on within-group standard deviations is introduced and shown to be advantageous in revealing potential group-dependent proteins additional to those found by prefiltering.     

A mechanically strong matrix for protein electrophoresis with enhanced silver staining properties.

Duracryl is a mechanically strong and elastic acrylamide-based matrix, useful for a wide variety of electrophoretic applications. The matrix is stable as a refrigerated solution for one year. Upon addition of appropriate catalysts, Duracryl forms a polymer-reinforced polyacrylamide gel matrix suitable for electrophoresis. The polymer-reinforced gel is superior to conventional polyacrylamide gels in terms of mechanical strength, elasticity and protein silver staining properties. Protein detection sensitivity by silver staining, as well as the linear response of silver deposition versus protein load, is equivalent to standard acrylamide/N,N'-methylene bisacrylamide gels. Additionally, the silver staining properties of the Duracryl matrix result in proteins appearing as monochromatic shades of grey instead of red, brown and yellow, as is the case of conventional polyacrylamide matrices. Monochromatic shades of grey are more suitable for image analysis and densitometry. The matrix is compatible with standard electroblotting and protein N-terminal sequencing procedures. Low acrylic acid content and conductivity allow incorporation of the matrix into isoelectric focusing gels. The matrix was found not to alter polypeptide migration relative to the standard acrylamide/N,N'-methylene bisacrylamide matrix.