Development of a gas diffusion FIA system for on-line monitoring of ethanol.

A flow injection analysis (FIA) system for on-line monitoring of ethanol in cultivation media was developed, which combines the selectivity of a gas diffusion membrane with the substrate specificity of immobilized alcohol oxidase (AOD). The optimization of membrane material and immobilized enzyme was performed using different FIA modes such as dual detection and dual injection. A simple modification of a polypropylene membrane with silicone enabled a very flexible adjustment of the linear range for alcohol detection between 0.0006 and 60% (v v-1). The ethanol content of cultivation media could be determined continuously with a frequency of 120-180 samples per hour with an excellent correlation to gas chromatographic analysis (r = 0.9996). The relative standard deviation for 10 successive injections was lower than 0.5%.     

A reagentless amperometric electrode based on carbon paste, chemically modified with D-lactate dehydrogenase, NAD(+), and mediator containing polymer for D-lactic acid analysis. II. On-line monitoring of fermentation process

The production of D-lactic acid by Lactobacillus delbrueckii (ATCC 9649) during fermentation was monitored on-line with a reagentless D-lactate dehydrogenase modified carbon paste electrode in a flow injection system integrated with a filtration sampling device. The time delay between sampling and detection was approximately 6 min. The use of an electropolymerized ortho-phenylenediamine membrane on the elctrode resulted in a very selective sensor response with acceptable stability and sensitivity. The D-lactate concentrations determined on-line agreed well with those determined by a standard method, suggesting that this sensor system is suitable for on-line monitoring of fermentation processes. (c) 1995 John Wiley & Sons, Inc.     

Development of a high-performance liquid chromatography retention index scale for toxicological drug screening

An efficient and practical analytical method for correcting HPLC retention data has been produced using an HPLC diode-array UV detector system. The system is based on retention indices (RI) and is to be used primarily for the identification of toxicologically relevant drugs involved in clinical and forensic toxicology. The RI correction method was chosen as it provided a slightly greater degree of reproducibility than using relative retention time (RRT), particularly for acidic and neutral drugs. Development of the system involved the establishment of the optimal chromatographic conditions and extensive studies of the stability of the system. An acetonitrile gradient elution was used with RI values determined by interpolation from a series of specifically chosen basic and acidic/neutral marker drugs which eluted at regular intervals to produce a linear RI scale. It was found that two separate RI scales were required for basic and acidic/neutral drugs. The use of multiple drug markers as primary retention index standards had not been previously applied to HPLC general drug screening and comparison with a recently published database suggests that the system may also provide improved selectivity.     

Monitoring on-line desalted lignocellulosic hydrolysates by microdialysis sampling micro-high performance anion exchange chromatography with integrated pulsed electrochemical detection/mass spectrometry

An on-line system based on microdialysis sampling (MD), micro-high performance anion exchange chromatography (micro-HPAEC), integrated pulsed electrochemical detection (IPED), and electrospray ionization mass spectrometry (MS) for the monitoring of on-line desalted enzymatic hydrolysates is presented. Continuous monitoring of the enzymatic degradation of dissolving pulp from Eucalyptus grandis as well as degradation of sugar cane bagasse in a 5-mL reaction vessel was achieved up to 24 h without any additional sample handling steps. Combining MD with micro-HPAEC-IPED/MS and on-line desalting of hydrolysates enabled injection (5 microL) of at least 23 samples in a study of the sequential action of hydrolytic enzymes in an unmodified environment where the enzymes and substrate were not depleted due to the perm-selectivity of the MD membrane (30 kDa cut-off). Xylanase, phenolic acid esterase and a combination of endoglucanase (EG II) with cellobiohydrolase (CBH I) resulted in the production of DP 1 after the addition of esterase, DP 2 and DP 3 after the addition of EG II and CBH I, from the dissolving pulp substrate. Similar sequential enzyme addition to sugar cane bagasse resulted in DP 1 production after the addition of esterase and DP 1, DP 2 and DP 3 production after the addition of the EG II and CBH I mixture. Combining MS on-line with micro-HPAEC-IPED proved to be a versatile and necessary tool for such a study compared to conventional methods. The mass selectivity of MS revealed complementary information, including the co-elution of saccharides as well as the presence of more than one type of DP 2 in the case of dissolving pulp and several types of DP 2 and DP 3 for sugar cane bagasse. This study demonstrates the limitation of the use of retention time alone for confirmation of the identity of saccharides especially when dealing with complex enzymatic hydrolysates. In situ sampling and sample clean-up combined with on-line desalting of the chromatographic effluent, provides a generic approach to achieve real time monitoring of enzymatic hydrolysates when they are detected by a combination of IPED and MS.     

Oligosaccharide analysis by capillary-scale high-pH anion-exchange chromatography with on-line ion-trap mass spectrometry

A capillary-scale high-pH anion-exchange chromatography (HPAEC) system for the analysis of carbohydrates was developed, in combination with two parallel on-line detection methods of sub-picomolar sensitivity: (1) pulsed amperometric detection (PAD); (2) capillary-scale desalting followed by electrospray ion-trap (IT) mass spectrometry (MS). The capillary chromatographic system combined the superb selectivity of HPAEC that allows routine separation of isomeric oligosaccharides with the information on monosaccharide sequence and linkage positions obtained by MS/MS fragmentation using the IT-MS. The applicability of the system in biomedical research was demonstrated by its use for the analysis of a urine sample of a GM1-gangliosidosis patient. Isomeric glycans in the sample could be resolved by HPAEC and assigned on the basis of the monosaccharide linkage information revealed by on-line IT-MS/MS.     

On-line antioxidant activity determination: comparison of hydrophilic and lipophilic antioxidant activity using the ABTS*+ assay

The ABTS/H(2)O(2)/HRP decoloration method is capable of determining both hydrophilic (in buffered media) and lipophilic (in organic media) antioxidant properties in complex samples. Now, we have adapted this method for on-line chromatographic determination. The easy, rapid and controlled generation of the ABTS radical and its great stability in buffered and organic media were important characteristics in the measurement of antioxidant activities. The HPLC-ABTS method used two pumps (one for isocratic eluting-phase and the other for preformed ABTS radical) and an UV-VIS diode array detector. The dual analysis of samples -- conventional (with UV-VIS detection) and ABTS-scavenging (at 600 nm) -- provided valuable on-line information about the correspondence between the presence of a determined compound and its possible antioxidant activity, and was applicable to both hydrophilic and lipophilic antioxidants (HAA and LAA). A comparison between HAA and LAA determined by the end-point method and by the on-line HPLC method is presented. The application to juices showed that both methods are suitable, sensitive and selective, gave similar values, and the HPLC-ABTS method contributed additional information about the antioxidant activity profile.     

Measurement and pharmacokinetic analysis of unbound ceftazidime in rat blood using microdialysis and microbore liquid chromatography

To evaluate the biodisposition of ceftazidime in rat blood, a rapid and simple microbore liquid chromatographic technique together with a microdialysis sampling technique were developed. This method involves an on-line design for blood dialysate directly injected into a microbore liquid chromatographic system. The chromatographic conditions consisted of a mobile phase of methanol–acetonitrile–100 mM monosodium phosphoric acid (pH 3.0) (10:10:80, v/v/v) pumped through a microbore reversed-phase column at a flow-rate of 0.05 ml/min. With the detection wavelength set at 254 nm, a good linear correlation was observed between the peak area and the ceftazidime concentration at 0.1 to 50 μg/ml (r=0.999). Microdialysis probes, being custom-made, were screened for acceptable in vivo recovery while chromatographic resolution and detection were validated for response linearity, as well as intra-day and inter-day variabilities. This method was then applied to the pharmacokinetic profiling of ceftazidime in blood following intravenous 50 mg/kg administration to rats. The pharmacokinetics was calculated from the corrected data for dialysate concentrations of ceftazidime versus time. This method has been used to study ceftazidime pharmacokinetics in rats and has proven to be rapid and reproducible.     

Automated column-switching high-performance liquid chromatography method for the determination of 1-hydroxypyrene in human urine

An on-line sample treatment method to determine 1-hydroxypyrene (1-OHP), a metabolite of polycyclic aromatic hydrocarbons (PAHs), in human urine has been developed. The hydrolysed biological fluid was directly injected into the chromatographic system after only centrifugation. A miniature precolumn loop packed with a preparative phase and coupled on-line to a liquid chromatographic (LC) system was used for analyte enrichment. The analytes were non-selectively desorbed with the LC eluent and cleaned by means of a column-switching procedure comprising two purification columns and an analytical column. Pre-treatment and analysis were performed within 2 and 20 min, respectively. Average 1-OHP recovery reached 99% in the 1–25 μg/l range of urine, and the quantitation limit was 20 ng/l for 100 μl of injected sample. A comparison with a more time-consuming off-line method was performed by analysing 120 urine samples of PAH-exposed and expected unexposed workers; the statistical treatment indicated that both methods are in agreement.     

On-line monitoring and controlling system for fermentation processes

A personal computer-based on-line monitoring and controlling system was developed for the fermentation of microorganism. The on-line HPLC system for the analysis of glucose and ethanol in the fermentation broth was connected to the fermenter via an auto-sampling equipment, which could perform the pipetting, filtration and dilution of the sample and final injection onto the HPLC through automation based on a programmed procedure. The A/D and D/A interfaces were equipped in order to process the signals from electrodes and from the detector of HPLC, and to direct the feed pumps, the motor of stirrer and gas flow-rate controller. The software that supervised the control of the stirring speed, gas flow-rate, pH value, feed flow-rate of medium, and the on-line measurement of glucose and ethanol concentration was programmed by using Microsoft Visual Basic under Microsoft Windows. The signal for chromatographic peaks from on-line HPLC was well captured and processed using an RC filter and a smoothing algorithm. This monitoring and control system was demonstrated to be effective in the ethanol fermentation of Zymomonas mobilis operated in both batch and fed-batch modes. In addition to substrate and product concentrations determined by on-line HPLC, the biomass concentration in Z. mobilis fermentation could also be on-line estimated by using the pH control and an implemented software sensor. The substrate concentration profile in the fed-back fermentation followed well the set point profile due to the fed-back action of feed flow-rate control.     

On-line antioxidant activity determination: comparison of hydrophilic and lipophilic antioxidant activity using the ABTS•+ assay

Abstract

The ABTS/H₂O₂/HRP decoloration method is capable of determining both hydrophilic (in buffered media) and lipophilic (in organic media) antioxidant properties in complex samples. Now, we have adapted this method for on-line chromatographic determination. The easy, rapid and controlled generation of the ABTS radical and its great stability in buffered and organic media were important characteristics in the measurement of antioxidant activities. The HPLC-ABTS method used two pumps (one for isocratic eluting-phase and the other for preformed ABTS radical) and an UV-VIS diode array detector. The dual analysis of samples – conventional (with UV-VIS detection) and ABTS-scavenging (at 600 nm) – provided valuable on-line information about the correspondence between the presence of a determined compound and its possible antioxidant activity, and was applicable to both hydrophilic and lipophilic antioxidants (HAA and LAA). A comparison between HAA and LAA determined by the end-point method and by the on-line HPLC method is presented. The application to juices showed that both methods are suitable, sensitive and selective, gave similar values, and the HPLC-ABTS method contributed additional information about the antioxidant activity profile.     

Using hierarchical models to compare the sensitivity of metabarcoding and qPCR for eDNA detection

Environmental DNA (eDNA) sampling—the detection of intra- or extra-cellular DNA in environmental samples—is a rapid and sensitive survey method for detecting aquatic species. Single-species detection methods (typically based on PCR or LAMP) have been shown to be more sensitive for detecting target species than multi-species detection methods, such as metabarcoding. However, previous studies have generally only compared these two eDNA detection approaches for a single target species and have used different methodological and statistical approaches. Here we present a comparison of single- and multi-species eDNA detection methods, drawing on two published case studies (one fish, one amphibian) and two new extensive datasets on a freshwater mammal (the platypus). To ensure consistent conclusions regarding the sensitivity of each eDNA method, we use the same hierarchical site occupancy-detection model for each dataset, incorporating uncertainty at the site, water sample, and technical replicate level. Overall, qPCR achieved higher detection probabilities than metabarcoding across species and datasets. However, differences in sensitivity between detection methods varied depending on methodological decisions concerning what constitutes a true positive detection (i.e., qPCR and metabarcoding thresholds). The decision as to which eDNA detection method to use should always be influenced by the study aims, but our results suggest that single-species detection methods based on qPCR may be preferable when the aim is to achieve a high detection probability for target species.     

On-line characterization of monoclonal antibody variants by liquid chromatography-mass spectrometry operating in a two-dimensional format

Recombinant monoclonal antibodies (MAbs) have become one of the most rapidly growing classes of biotherapeutics in the treatment of human disease. MAbs are highly heterogeneous proteins, thereby requiring a battery of analytical technologies for their characterization. However, incompatibility between separation and subsequent detection is often encountered. Here we demonstrate the utility of a generic on-line liquid chromatography–mass spectrometry (LC-MS) method operated in a two-dimensional format toward the rapid characterization of MAb charge and size variants. Using a single chromatographic system capable of running two independent gradients, up to six fractions of interest from an ion exchange (IEC) or size exclusion (SEC) separation can be identified by trapping and desalting the fractions onto a series of reversed phase trap cartridges with subsequent on-line analysis by mass spectrometry. Analysis of poorly resolved and low-level peaks in the IEC or SEC profile was facilitated by preconcentrating fractions on the traps using multiple injections. An on-line disulfide reduction step was successfully incorporated into the workflow, allowing more detailed characterization of modified MAbs by providing chain-specific information. The system is fully automated, thereby enabling high-throughput analysis with minimal sample handling. This technology provides rapid data turnaround time, a much needed feature during product characterization and development of multiple biotherapeutic proteins.     

Colorimetric method for the determination of ethanol by Flow Injection Analysis

An automated Flow Injection Analysis system using stop-flow technique for quantifying ethanol based in a colorimetric detection method was developed. The system permitted analysis in a linear range of 0.05–1 g ethanol l^–1 without external dilution, a sampling frequency of 15 analyses per hour, and a relative standard deviation of 3.5%. A dilution line was implemented in the FIA system permitting the extension of the linear range to 0.5–5.2 g ethanol l^–1 maintaining the same sampling frequency and standard deviation. The system was applied to measure ethanol concentrations present in samples of an alcoholic fermentation and the results showed no significant difference with other analytical procedures (GC).     

Determination of andrographolide,deoxyandrographolide and neoandrographolide in the Chinese herb Andrographis paniculata by micellar electrokinetic capillary chromatography

In this paper a micellar electrokinetic capillary chromatographic (MEKC) method has been developed for determining the active components (andrographolide, deoxyandrographolide and neoandrographolide) in water:ethanol extracts of the Chinese crude herb Andrographis paniculata and its preparations (Chuanxinlian and Xiaoyan Lidan tablets). The optimum separation conditions were 15 mM sodium dodecyl sulphate in 30 mM borate buffer (pH 9.5) with UV detection wavelength at 214 nm and a constant voltage of 16 kV. An HPLC method was employed in order to validate the MEKC method with respect to separation efficiency, sensitivity, linearity and repeatability. The two methods are shown to be complementary because of their different selectivity and thus are very suitable for cross-validation studies. The MEKC method is demonstrated to be more appropriate for the analysis of the active compounds in A. paniculata in that it is easier and less expensive to use and does not suffer from contamination of the chromatographic column.     

Integrated flow-injection processing for on-line quantification of plasmid DNA during cultivation of E. coli

An integrated flow-injection processing (FIP) system for the quantification of plasmids during cultivation is described. The system performs on-line sampling, cell lysis, and quantification of plasmids in an integrated manner during cultivation of E. coli. The system was operated by using a miniaturized expanded-bed column which can be used for handling samples containing cells and cell debris without interfering with the binding analysis. Two types of detectors (one measuring UV absorbance at 254 nm and a fluorometer) are used for on-line plasmid detection. The system was developed using standard solutions and it was successfully applied in monitoring plasmid contents during a cultivation of E. coli.     

Determination of prostaglandin E(2) by on-line solid-phase extraction-liquid chromatography with ultraviolet detection for microsomal prostaglandin E(2) synthase-1 inhibitor screening

A rapid, robust and selective on-line solid-phase extraction-liquid chromatographic method with ultra-violet detection (on-line SPE-LC-UV) for microsomal prostaglandin E(2) synthase-1 (mPGES-1) inhibitor screening was developed and validated. Disrupted A549 cells were used as mPGES-1 source and the formation of prostaglandin E(2) (PGE(2)) out of the substrate prostaglandin H(2) (PGH(2)) was determined at 195 nm. Direct on-line sample clean up was achieved by automated column switch (C18 trap column) prior isocratic separation using a C18 analytical column. The on-line SPE-LC-UV method was accurate, precise and reproducible in the range of 71-1763 ng/ml for PGE(2) and met the generally accepted criteria for bioanalytical methods. The method was successfully applied to determine the IC(50) value of the known mPGES-1 inhibitor NS-398.     

Enantioselective HPLC determination of E-6087, a new COX-2 inhibitor, in human plasma: Validation and pharmacokinetic application

E-6087 is a nonsteroidal anti-inflammatory compound that selectively inhibits cyclooxygenase-2. Because E-6087 has a chiral center, this compound is a racemic mixture of two stereoisomers, (+)-(R)-E-6087 (E-6231) and (-)-(S)-E-6087 (E-6232). A normal-phase liquid-chromatographic method for the enantioselective determination of E-6087 in human plasma was developed and validated. The samples were extracted using solid-phase extraction cartridges containing C(18) sorbent, and the extracts were redissolved in absolute ethanol and injected into the chromatographic system. The enantiomeric separation was achieved on a chiral stationary-phase column of derivatized amylose, and the enantiomers were quantified by fluorescence detection. The method was validated for drug concentrations ranging from 5 to 400 ng/ml for both enantiomers. No peaks interfering with the quantification of enantiomers were observed. The limit of quantification was 5 ng/ml, with precision expressed as a coefficient of variation lower than 10.6% and accuracy expressed as relative error lower than 12.2%. The utility of this method was demonstrated by analysis of plasma samples from healthy volunteers given an oral dose of rac-E-6087. Peak plasma levels of E-6231 were higher than levels obtained for E-6232. Results were consistent with those obtained with a conventional reversed-phase method used for determination of the racemic compound.     

Sensitive method for the determination of vincristine in human serum by high-performance liquid chromatography after on-line column-extraction

A column-switching high-performance liquid chromatographic method was developed for the determination of vincristine in serum. Sample preparation was carried out by means of on-line column-extraction, using a C₁₈ reversed-phase preconcentration column. This technique is simple (minimizing manual sampling errors), rapid (reduction of time and costs) and can be easily automated. Both ultraviolet and electrochemical detection are possible, but the latter shows a cleaner chromatogram and is, by the use of a new electrochemical detector, far more sensitive (detection limit 0.3 μg/l at a signal-to-noise ratio of 3). A matrix study was carried out (using human serum and urine and two kinds of calf's serum). Although it appeared that the system was matrix-dependent, no difference in matrix effects could be found in the serum or plasma of different patients. Controls for human serum analysis should be prepared in human serum. With the method described, pharmacokinetic studies of vincristine in children can be performed.     

Clinical use of polyethylene glycols as marker substances and determination in urine by liquid chromatography

Adulteration of samples is a serious problem in the analysis of drugs of abuse. One of the most frequent methods is substitution of urines by "clean" urines to gain false-negative results in laboratory tests for drugs of abuse. One way to approach this problem may be to label the patient's urine with marker substances which are given orally prior to the delivery of urine. This concept is based on methods for determining malabsorption in pediatric medicine. We report a protocol for evaluating low-molecular-mass polyethylene glycols as enteral labelling marker substances. For monitoring renal excretion of the ingested polyethylene glycols we have developed and optimised an isocratic reversed-phase high-performance liquid chromatographic method with automatic sample cleanup by column switching in the back-flush technique and with RI detection. The chromatographic procedure is simple, reliable and rapid, allowing a high sample throughput for routine screening.     

Automatic on-line fermentation headspace gas analysis using a computer-controlled gas chromatograph

A computer-controlled headspace gas chromatograph was used to monitor the progress of ethanol production from both aerobic batch and anaerobic continuous fermentations. Using an automatic, electropneumatic sampling system, aliquots of fermentation headspace gas were injected directly onto the column for quantitative ethanol determinations every six minutes. A sample volume of 1 mL permitted liquid ethanol concentrations from 2 to 100 g/L to be measured with better than 3% standard deviation on five repeated injections. Provided fermenter liquid temperature and ionic strength were maintained constant, the signal-tohyphen;concentration ratio remained linear to 80 g/L ethanol. This quantitative gas chromatographic (GC) method is suitable for accurate, precise analysis of multiple solvent fermentations, and is limited only by the elution rate and separating capacity of the GC column.