Context-dependent conformation of diethylglycine residues in peptides.

Diethylglycine (Deg) residues incorporated into peptides can stabilize fully extended (C5) or helical conformations. The conformations of three tetrapeptides Boc-Xxx-Deg-Xxx-Deg-OMe (Xxx=Gly, GD4; Leu, LD4 and Pro, PD4) have been investigated by NMR. In the Gly and Leu peptides, NOE data suggest that the local conformations at the Deg residues are fully extended. Low temperature coefficients for the Deg(2) and Deg(4) NH groups are consistent with their inaccessibility to solvent, in a C5 conformation. NMR evidence supports a folded beta-turn conformation involving Deg(2)-Gly(3), stabilized by a 4-->1 intramolecular hydrogen bond between Pro(1) CO and Deg(4) NH in the proline containing peptide (PD4). The crystal structure of GD4 reveals a hydrated multiple turn conformation with Gly(1)-Deg(2) adopting a distorted type II/II' conformation, while the Deg(2)-Pro(3) segment adopts a type III/III' structure. A lone water molecule is inserted into the potential 4-->1 hydrogen bond of the Gly(1)-Deg(2) beta-turn.     

Conformation analysis of the N-glycosylation site Asn-X-Thr/Ser in glycoproteins

Theoretical conformational analysis of oligopeptides CH3CO-Asn-X-Thr-NHCH3 (X = Gly, Ala, Pro), modelling N-glycosylation site, and their glycosylated derivatives CH3CO-(GlcNAc beta 1-4GlcNAc beta 1) Asn-X-Thr-NHCH3 has been carried out. Active conformations of the site are found, corresponding to structural prerequisities of N-glycosylation: Asn residue's position in beta-turn and hydrogen bond formation between side chains of Asn and Thr/Ser residues. In this case the L conformation of the central residue X is most probable. Since Pro residue does not possess this conformation, sequences with X = Pro are not glycosylated. It is shown that glycosylation of the above-mentioned sites is accompanied by reorientation of the Asn residue's side chains.     

Proline-containing beta-turns. IV. Crystal and solution conformations of tert.-butyloxycarbonyl-L-prolyl-D-alanine and tert.-butyloxycarbonyl-L-prolyl-D-alanyl-L-alanine

The conformations of the dipeptide t-Boc-Pro-DAla-OH and the tripeptide t-Boc-Pro-DAla-Ala-OH have been determined in the crystalline state by X-ray diffraction and in solution by CD, n.m.r. and i.r. techniques. The unit cell of the dipeptide crystal contains two independent molecules connected by intermolecular hydrogen bonds. The urethane-proline peptide bond is in the cis orientation in both the molecular forms while the peptide bond between Pro and DAla is in the trans orientation. The single dipeptide molecule exhibits a "bent" structure which approximates to a partial beta-turn. The tripeptide adopts the 4----1 hydrogen-bonded type II beta-turn with all trans peptide bonds. In solution, the CD and i.r. data on the dipeptide indicate an ordered conformation with an intramolecular hydrogen bond. N.m.r. data indicate a significant proportion of the conformer with a trans orientation at the urethane-proline peptide bond. The temperature coefficient of the amide proton of this conformer in DMSO-d6 points to a 3----1 intramolecular hydrogen bond. Taken together, the data on the dipeptide in solution indicate the presence (in addition to the cis conformer) of a C7 conformation which is absent in the crystalline state. The spectral data on the tripeptide indicate the presence of the type II beta-turn in solution in addition to the nonhydrogen-bonded conformer with the cis peptide bond between the urethane and proline residues. The relevance of these data to studies on the substrate specificity of collagen prolylhydroxylase is pointed out.     

Stereochemistry of peptides containing 1-aminocycloheptane-1-carboxylic acid (Ac7c).

The crystal structures of four peptides incorporating 1-aminocycloheptane-1-carboxylic acid (Ac7c) are described. Boc-Aib-Ac7c-NHMe and Boc-Pro-Ac7c-Ala-OMe adopt beta-turn conformations stabilized by an intramolecular 4----1 hydrogen bond, the former folding into a type-I/III beta-turn and the latter into a type-II beta-turn. In the dipeptide esters, Boc-Aib-Ac7c-OMe and Boc-Pro-Ac7c-OMe, the Ac7c and Aib residues adopt helical conformations, while the Pro residue remains semi-extended in both the molecules of Boc-Pro-Ac7c-OMe found in the asymmetric unit. The cycloheptane ring of Ac7c residues adopts a twist-chair conformation in all the peptides studied. 1H-NMR studies in CDCl3 and (CD3)2SO and IR studies in CDCl3 suggest that Boc-Aib-Ac7c-NHMe and Boc-Pro-Ac7c-Ala-OMe maintain the beta-turn conformations in solution.     

Polyproline, beta-turn helices. Novel secondary structures proposed for the tandem repeats within rhodopsin, synaptophysin, synexin, gliadin, RNA polymerase II, hordein, and gluten

Seven proteins each contain 8 to 52 tandem repeats of a unique class of oligopeptide. The consensus peptide for each is rhodopsin Tyr Pro Pro Gln Gly synaptophysin Tyr Gly Pro Gln Gly synexin Tyr Pro Pro Pro Pro Gly gliadin Tyr Pro Pro Pro Gln Pro RNA polymerase II Tyr Ser Pro Thr Ser Pro Ser hordein Phe Pro Gln Gln Pro Gln Gln Pro gluten Tyr Pro Thr Ser Pro Gln Gln Gly Tyr Although there is obvious variation of sequence and of length, the penta- to nonapeptides share an initial Tyr (or Phe) and have high Pro contents and abundant Gly, Gln, and Ser. We have evaluated helical models that both recognize the uniqueness of these sequence repeats and accommodate variations on the basic theme. We have developed a group of related helical models for these proteins with about three oligopeptide repeats per turn of 10-20 A. These models share several common features: Most of the phi dihedral angles are -54 degrees, to accommodate Pro at all positions except the first (Tyr). Except for the beta-turns, most psi dihedral angles are near +140 degrees as found in polyproline. Each oligopeptide has at least one beta-turn; several have two. Some contain a cis-Tyr, Pro peptide bond; a few have a cis-bond plus one beta-turn. Tyr side chains vary from totally exposed to buried within the helices and could move to accommodate either external hydrophobic interactions or phosphorylation. The several related structures seem to be readily interconverted without major change in the overall helical parameters, and therein may lie the key to their functions.     

CD-n.m.r. study of the solution conformation of bradykinin analogs containing alpha-aminoisobutyric acid

The conformation in aqueous solution of several alpha-aminoisobutyric acid (AIB)-containing analogs of bradykinin (BK) has been probed by complementary CD and 1H n.m.r. measurements. The conclusion reached is that substitution of AIB for Pro2 and/or Pro3 in BK stabilizes a degree of beta-turn conformation in the N-terminal tetrapeptide moiety of the resulting analogs. Changing the solvent from water to DMSO or TFE further enhances the contribution of particular hydrogen bonded structures to the time-averaged conformation of these peptides. Bradykinin and [AIB7]-BK adopt similar hydrogen bonded conformations in TFE, apparently with a contribution from a beta-turn involving their common Arg1-Pro2-Pro3-Gly4 moiety. The contrasting biological activities of BK and its AIB-analogs are considered in terms of the conformational analogy between the AIB-residue and cis' Pro and the propensity for a beta-turn at the N-terminus of the peptide.     

Structural recognition of an ICAM-1 peptide by its receptor on the surface of T cells: conformational studies of cyclo (1, 12)-Pen-Pro-Arg-Gly-Gly-Ser-Val-Leu-Val-Thr-Gly-Cys-OH.

The purpose of this study is to elucidate the solution conformation of cyclic peptide 1 (cIBR), cyclo (1, 12)-Pen1-Pro2-Arg3-Gly4-Gly5-Ser6-Val7-Leu8-V al9-Thr10-Gly11-Cys12-OH, using NMR, circular dichroism (CD) and molecular dynamics (MD) simulation experiments. cIBR peptide (1), which is derived from the sequence of intercellular adhesion molecule-1 (ICAM-1, CD54), inhibits homotypic T-cell adhesion in vitro. The peptide hinders T-cell adhesion by inhibiting the leukocyte function-associated antigen-1 (LFA-1, CD11a/CD18) interaction with ICAM-1. Furthermore, Molt-3 T cells bind and internalize this peptide via cell surface receptors such as LFA-1. Peptide internalization by the LFA-1 receptor is one possible mechanism of inhibition of T-cell adhesion. The recognition of the peptide by LFA-1 is due to its sequence and conformation; therefore, this study can provide a better understanding for the conformational requirement of peptide-receptor interactions. The solution structure of 1 was determined using NMR, CD and MD simulation in aqueous solution. NMR showed a major and a minor conformer due to the presence of cis/trans isomerization at the X-Pro peptide bond. Because the contribution of the minor conformer is very small, this work is focused only on the major conformer. In solution, the major conformer shows a trans-configuration at the Pen1-Pro2 peptide bond as determined by HMQC NMR. The major conformer shows possible beta-turns at Pro2-Arg3-Gly4-Gly5, Gly5-Ser6-Val7-Leu8, and Val9-Thr10-Gly11-Cys12. The first beta-turn is supported by the ROE connectivities between the NH of Gly4 and the NH of Gly5. The connectivities between the NH of Ser6 and the NH of Val7, followed by the interaction between the amide protons of Val7 and Leu8, support the presence of the second beta-turn. Furthermore, the presence of a beta-turn at Val9-Thr10-Gly11-Cys12 is supported by the NH-NH connectivities between Thr10 and Gly11 and between Gly11 and Cys12. The propensity to form a type I beta-turn structure is also supported by CD spectral analysis. The cIBR peptide (1) shows structural similarity at residues Pro2 to Val7 with the same sequence in the X-ray structure of D1-domain of ICAM-1. The conformation of Pro2 to Val7 in this peptide may be important for its binding selectivity to the LFA-1 receptor.     

Structure and stability of the P93G variant of ribonuclease A.

The peptide bonds preceding Pro 93 and Pro 114 of bovine pancreatic ribonuclease A (RNase A) are in the cis conformation. The trans-to-cis isomerization of these bonds had been indicted as the slow step during protein folding. Here, site-directed mutagenesis was used to replace Pro 93 or Pro 114 with a glycine residue, and the crystalline structure of the P93G variant was determined by X-ray diffraction analysis to a resolution of 1.7 A. This structure is essentially identical to that of the wild-type protein, except for the 91-94 beta-turn containing the substitution. In the wild-type protein, the beta-turn is of type VIa. In the P93G variant, this turn is of type II with the peptide bond preceding Gly 93 being trans. The thermal stabilities of the P93G and P114G variants were assessed by differential scanning calorimetry and thermal denaturation experiments monitored by ultraviolet spectroscopy. The value of delta deltaGm which reports on the stability lost in the variants, is 1.5-fold greater for the P114G variant than for the P93G variant. The greater stability of the P93G variant is likely due to the relatively facile accommodation of residues 91-94 in a type II turn, which has a preference for a glycine residue in its i + 2 position.     

beta-Alanyl-beta-alanine in cyclic beta-turned peptides.

In the present paper we describe the synthesis, purification, and single crystal x-ray analysis of the cyclic pentapeptide cyclo-(L-Pro-L-Pro-L-Phe-beta-Ala-beta-Ala). The peptide was synthesized by classical solution methods and the cyclization of the free pentapeptide was accomplished in good yields in diluted methylene-chloride solution using N,N-dicyclohexylcarbodiimide. The compound crystallizes in the monoclinic space group P21 from hot water with five solvent molecules. The Pro1-Pro2 peptide bond is cis and the molecular conformation is stabilized by an intramolecular hydrogen bond between the CO group of the beta-Ala5 and the NH of the Phe3 residue. The Pro1-Pro2 segment occupies the relative positions 2 and 3 of a type VIa beta-turn, while the L-phenylalanyl-beta-alanyl-beta-alanine segment is incorporated in a C13-like ring structure. The crystal packing is characterized by a network of 11 intermolecular hydrogen bonds involving all the remaining CO, NH, and the water molecules.     

Conformational studies of two bradykinin antagonists by using two-dimensional NMR techniques and molecular dynamics simulations

The solution conformations of two potent antagonists of bradykinin (Arg1-Pro2-Pro3-Gly4-Phe5-Ser6-Pro7-Phe8-Arg9), [Aca(-1),DArg0,Hyp3,Thi5,DPhe7,(N-Bzl)Gly8]BK (1) and [Aaa(-1),DArg0,Hyp3,Thi5,(2-DNal)7,Thi8]BK (2), were studied by using 2D NMR spectroscopy in DMSO-d6 and molecular dynamics simulations. The NMR spectra of peptide 1 reveals the existence of at least two isomers arising from isomerization across the DPhe7-(N-Bzl)Gly8 peptide bond. The more populated isomer possesses the cis peptide bond at this position. The ratio of cis/trans isomers amounted to 7:3. With both antagonists, the NMR data indicate a beta-turn structure for the Hyp3-Gly4 residues. In addition, for peptide 2, position 2,3 is likely to be occupied by turn-like structures. The cis peptide bond between DPhe7 and (N-Bzl)Gly8 in analogue 1 suggests type VI beta-turn at position 7,8. The molecular dynamics runs were performed on both peptides in DMSO solution. The results indicate that the structure of peptide 1 is characterized by type VIb beta-turn comprising residues Ser6-Arg9 and the betaI or betaII-turn involving the Pro2-Thi5 fragment, whereas peptide 2 shows the tendency towards the formation of type I beta-turn at position 2,3. The structures of both antagonists are stabilized by a salt bridge between the guanidine moiety of Arg1 and the carboxyl group of Arg9. Moreover, the side chain of DArg0 is apart of the rest of molecule and is not involved in structural elements except for a few calculated structures.     

Sequence replacements in the central beta-turn of plastocyanin.

The role of beta-turns in dictating the structure of a beta-barrel protein is assessed by probing the tolerance of the central beta-turn of poplar plastocyanin to substitution by arbitrary sequences. Native plastocyanin binds copper and is colored bright blue. However, when the wild-type Pro47-Ser48-Gly49-Val50 turn sequence is replaced by arbitrary tetrapeptides, the vast majority (92/98 = 94%) of mutant proteins cannot fold into the native blue structure. Characterization of the colorless mutant proteins demonstrates that the majority of substitutions in this type II beta-turn disrupt the native structure severely. Gross structural changes are indicated by major differences in the CD spectra of the mutants relative to the wild-type protein, and by the much larger apparent size of mutant proteins in gel filtration experiments. These mutant proteins do not bind copper. Furthermore, Cys84 forms a disulfide bond readily in the colorless mutant proteins, indicating that it has moved away from the buried position it occupies in the native copper binding site and has become exposed. These results indicate that the central beta-turn in plastocyanin is not merely a default structure arising in response to the surrounding context; rather, sequence information in this turn plays an active role in dictating the location of a chain reversal in the beta-barrel structure. These findings are discussed in terms of their implications for the folding of natural proteins, as well as the design of de novo proteins.     

1H-NMR studies of receptor-selective substance P analogues reveal distinct predominant conformations in DMSO-d6

Proton nmr parameters are reported for DMSO-d6 solutions of two receptor-selective substance P analogues: Ac[Arg6,Pro9]SP6-11, which is selective for the NK-1 (SP-P) receptor and [pGlu6,N-MePhe8]SP6-11, which selectively activates the NK-3 (SP-N) receptor. Full peak assignments of both analogues were obtained by COSY experiments. The chemical shifts, coupling constants, and temperature coefficients of amide proton chemical shifts as well as NOESY effects and calculated side-chain rotamer populations of Phe side chains are reported for both peptides. Analysis of coupling constants and temperature coefficients together with the nuclear Overhauser enhancement spectroscopy effects suggest that Ac[Arg6,Pro9]SP6-11 has a trans configuration about the Phe8-Pro9 amide bond and the preferred conformation of this analogue has a type I beta-turn. The nmr data for [pGlu6,N-MePhe8]SP6-11 suggest that this peptide exists as a mixture of cis-trans isomers in which the cis isomer can preferably adopt a type VI beta-turn conformation, and the trans isomer can adopt a gamma-turn conformation. There are indications that the two last turns are stabilized by a hydrogen bond between the syn carboxamide proton and the pGlu ring carbonyl.     

Stability of protein-bound conformations of bioactive peptides: the folded conformation of an epidermal growth factor-like thrombomodulin fragment is similar to that recognized by thrombin

The relationship between the free and bound conformations of bioactive peptides is explored using the epidermal growth factor (EGF)-like thrombomodulin fragment hTM409-426 as a model system. The hTM409-426 peptide has a sequence of C(409)PEGYILDDGFIC(421)TDIDE (with a disulfide bond between Cys409 and Cys421) and is a selective inhibitor of thrombin. Upon binding to thrombin, hTM409-426 adopts a well-defined conformation-namely, a beta-turn followed by an antiparallel beta-sheet, similar to those found in all other EGF-like protein repeats (Hrabal et al., Protein Science, 1996, Vol. 5, 195-203). Here we demonstrate that, at pH 6.8 and at 25 degrees C, the hTM409-426 peptide in the free state is very flexible, but still populates a type II beta-turn over residues Pro410-Glu411-Gly412-Tyr413 and the clustering of some hydrophobic side chains, both of which are present in the thrombin-bound conformation. At a lower temperature of 5 degrees C, significant conformational shifts of the C alpha H proton resonances and extensive medium- and long-range NOEs are observed, indicating the presence of folded conformations with unique backbone-backbone and side-chain interactions. A comparison of the NOE patterns in the free state with transferred NOEs shows that the free-state folded and the thrombin-bound conformations of the hTM409-426 peptide are very similar, particularly over residues Pro410-Ile424. The folded conformation of hTM409-426 appears to be stabilized by two hydrophobic clusters, one formed by the side chains of residues Pro410, Tyr413, Leu415, and Phe419 and the Cys409-Cys421 disulfide bond, the second involving residues Ile414 and Ile424. These results indicate that the overall topology of the thrombin-bound conformation of the hTM409-426 peptide is prefolded in the free state and the primary sequence (including the disulfide bond) may be selective for an ensemble of conformations similar to that recognized by thrombin.     

Depsipeptide analogues of elastin repeating sequences: conformational analysis

In this work the effect of elimination of a specific hydrogen bond on the conformation of the repeating peptides of elastin was studied. These repeating sequences are the pentapeptide Val-Pro-Gly-Val-Gly and the hexapeptide Val-Ala-Pro-Gly-Val-Gly. These sequences have been proposed to occur in a beta-turn conformation with a hydrogen bond involving the amide NH of the internal valine residue and the carbonyl oxygen of the residue preceding proline. In the depsipeptide analogues studied in this work, this 4-1 beta-turn hydrogen bond cannot occur. We studied the depsipeptide sequences Val-Pro-Gly-Hiv-Gly and Val-Ala-Pro-Gly-Hiv-Gly (Hiv denotes S-alpha-hydroxyisovaleric acid, the hydroxy acid analogue of valine), as well as the peptide sequences Val-Pro-Gly-Val-Gly and Val-Ala-Pro-Gly-Val-Gly. Compounds studied included sequences with the Boc and benzyl ester protecting groups, derivatives with the acetyl and N-methylamide end groups and polymers of the above sequences. Our conclusions are based on a comparison of depsipeptides with analogous peptides. Conformational analysis was carried out by nmr, CD, and ir spectroscopy. We propose that in the repeating sequences of elastin an equilibrium exists between a gamma-turn structure and a beta-turn structure in the Pro-Gly segment resulting in a structure that combines flexibility with strong conformational preferences. The C7 involves the amide NH of the internal glycine and the carbonyl oxygen of the residue preceding proline. In the N-methylamide derivatives a similar equilibrium exists in the Gly-Val-Gly segment. In the depsipeptides the beta-turn cannot occur and only the gamma-turn is seen. In the polydepsipeptides the major conformational feature is a type I beta-turn involving Gly5 NH and Pro CO.     

A peptide model for proline isomerism in the unfolded state of staphylococcal nuclease.

Nuclear magnetic resonance spectroscopy has been used to investigate a synthetic peptide (YVYKPNNTHE) corresponding to residues 113 to 122 of staphylococcal nuclease. In the major folded state of the protein this region forms a type VIa beta-turn containing a cis Lys116-Pro117 peptide bond. There is, however, no evidence for any significant population of such a turn in the peptide in aqueous solution and the X-Pro bond is predominantly in the trans configuration. The peptide exhibits several well-resolved minor resonances due to the presence of a small fraction (4 +/- 2%) of the cis-proline isomer. The ratio of cis to trans isomer populations was found to be independent of temperature between 5 degrees C and 70 degrees C, indicating that delta H for the isomerism is close to zero. Using magnetization transfer techniques the rate of trans to cis interconversion was found to be 0.025(+/- 0.013) s-1 at 50 degrees C. The thermodynamics and kinetics of isomerism in the peptide are very similar to those estimated for the Lys116-Pro117 peptide bond in unfolded nuclease, suggesting that the cis-trans equilibrium in the unfolded protein is largely determined by the residues adjacent to Pro117 in the sequence. These results are consistent with previous suggestions that the cis-proline bond is stabilized late in the folding process and that the predominance of the cis form in folded nuclease is due to stabilizing interactions within the protein that give rise to a favorable enthalpy term.     

Effect of conformation on the conversion of cyclo-(1,7)-Gly-Arg-Gly-Asp-Ser-Pro-Asp-Gly-OH to its cyclic imide degradation product.

The objective of this study was to explain the increased propensity for the conversion of cyclo-(1,7)-Gly-Arg-Gly-Asp-Ser-Pro-Asp-Gly-OH (1), a vitronectin-selective inhibitor, to its cyclic imide counterpart cyclo-(1,7)-Gly-Arg-Gly-Asu-Ser-Pro-Asp-Gly-OH (2). Therefore, we present the conformational analysis of peptides 1 and 2 by NMR and molecular dynamic simulations (MD). Several different NMR experiments, including COSY, COSY-Relay, HOHAHA, NOESY, ROESY, DQF-COSY and HMQC, were used to: (a) identify each proton in the peptides; (b) determine the sequential assignments; (c) determine the cis-trans isomerization of X-Pro peptide bond; and (d) measure the NH-HCalpha coupling constants. NOE- or ROE-constraints were used in the MD simulations and energy minimizations to determine the preferred conformations of cyclic peptides 1 and 2. Both cyclic peptides 1 and 2 have a stable solution conformation; MD simulations suggest that cyclic peptide 1 has a distorted type I beta-turn at Arg2-Gly3-Asp4-Ser5 and cyclic peptide 2 has a pseudo-type I beta-turn at Ser5-Pro6-Asp7-Gly1. A shift in position of the type I beta-turn at Arg2-Gly3-Asp4-Ser5 in peptide 1 to Ser5-Pro6-Asp7-Gly1 in peptide 2 occurs upon formation of the cyclic imide at the Asp4 residue. Although the secondary structure of cyclic peptide 1 is not conducive to succinimide formation, the reaction proceeds via neighbouring group catalysis by the Ser5 side chain. This mechanism is also supported by the intramolecular hydrogen bond network between the hydroxyl side chain and the backbone nitrogen of Ser5. Based on these results, the stability of Asp-containing peptides cannot be predicted by conformational analysis alone; the influence of anchimeric assistance by surrounding residues must also be considered.     

Folding of immunogenic peptide fragments of proteins in water solution. I. Sequence requirements for the formation of a reverse turn

A systematic examination by 1H nuclear magnetic resonance of the population of beta-turn-containing conformers in several series of short linear peptides in water solution has demonstrated a dependence on amino acid sequence which has important implications for initiation of protein folding. The peptides consist of a number of variants of the sequence Tyr-Pro-Tyr-Asp, the trans isomer of which was previously shown to contain a reverse turn in water. Two-dimensional rotating-frame nuclear Overhauser effect spectroscopy provides unequivocal evidence that substantial populations of reverse turn conformations occur in water solutions of certain of these peptides. In the unfolded state, the peptides adopt predominantly extended chain (beta) conformations in water. It appears probable from the nuclear Overhauser effect connectivities observed that the reverse turns in the trans isomers are predominantly type II. The low temperature coefficient of the amide proton resonance of the residue at position 4 of the turn suggests the presence of an intramolecular hydrogen bond. The presence of the beta-turn conformation has been confirmed for certain peptides by circular dichroism measurements. Substitutions at positions 3 and 4 in the sequence Tyr-Pro-Tyr-Asp-Val can enhance or abolish the beta-turn population in the trans peptide isomers. The residue at position 3 of the turn is the primary determinant of its stability. A small amount of additional stabilization appears to result from an electrostatic interaction between the side-chain of residue 4 and the unblocked amino terminus. For peptides of the series Tyr-Pro-X-Asp-Val, where X represents all L-amino acid except Trp and Pro, the temperature coefficient of the Asp4 amide proton resonance provides a measure of the beta-turn population. The beta-turn populations in water solution measured in this way correlate with the beta-turn probabilities determined from protein crystal structures. This indicates that it is frequently the local amino acid sequence, rather than medium- to long-range interactions in the folded protein, that determines the beta-turn conformation in the folded state. Such sequences are excellent candidates for protein folding initiation sites. A high population of structured forms appears to be present in the cis isomer of certain of the peptides, as shown by a considerable increase in the proportion of the cis isomer and by measurement of nuclear Overhauser effects and 3JN alpha coupling constants.(ABSTRACT TRUNCATED AT 400 WORDS)     

Influence of N-terminal residue stereochemistry on the prolyl amide geometry and the conformation of 5-tert-butylproline type VI beta-turn mimics.

The effects of N-terminal amino acid stereochemistry on prolyl amide geometry and peptide turn conformation were investigated by coupling both L- and D-amino acids to (2S, 5R)-5-tert-butylproline and L-proline to generate, respectively, N-(acetyl)dipeptide N'-methylamides 1 and 2. Prolyl amide cis- and trans-isomers were, respectively, favored for peptides 1 and 2 as observed by proton NMR spectroscopy in water, DMSO and chloroform. The influence of solvent composition on amide proton chemical shift indicated an intramolecular hydrogen bond between the N'-methylamide proton and the acetamide carbonyl for the major conformer of dipeptides (S)-1, that became less favorable in (R)-1 and 2. The coupling constant (3J(NH,alpha)) values for the cis-isomer of (R)-1 indicated a phi2 dihedral angle value characteristic of a type VIb beta-turn conformation in solution. X-ray crystallographic analysis of N-acetyl-D-leucyl-5-tert-butylproline N'-methylamide (R)-lb showed the prolyl residue in a type VIb beta-turn geometry possessing an amide cis-isomer and psi3-dihedral angle having a value of 157 degrees, which precluded an intramolecular hydrogen bond. Intermolecular hydrogen bonding between the leucyl residues of two turn structures within the unit cell positioned the N-terminal residue in a geometry where their phi2 and psi2 dihedral angle values were not characteristic of an ideal type VIb turn. The circular dichroism spectra of tert-butylprolyl peptides (S)- and (R)-1b were found not to be influenced by changes in solvent composition from water to acetonitrile. The type B spectrum exhibited by (S)-1b has been previously assigned to a type VIa beta-turn conformation [Halab L, Lubell WD. J. Org. Chem. 1999; 64: 3312-3321]. The type C spectrum exhibited by the (R)-lb has previously been associated with type II' beta-turn and alpha-helical conformations in solution and appears now to be also characteristic for a type VIb geometry.     

Inactivation of Neurotensin by Rat Brain Synaptic Membranes. Cleavage at the Pro10-Tyr11 Bond by Endopeptidase 24.11 (Enkephalinase) and a Peptidase Different from Proline-Endopeptidase

It was shown previously that the tridecapeptide neurotensin is inactivated by rat brain synaptic membranes and that one of the primary inactivating cleavages occurs at the Pro10-Try11 peptide bond, leading to the formation of NT1-10 and NT11-13. The present study was designed to investigate the possibility that this cleavage was catalyzed by proline endopeptidase and/or endopeptidase 24.11 (enkephalinase). Purified rat brain synaptic membranes were found to contain a N-benzyloxycarbonyl-Gly-Pro-4-methyl-coumarinyl-7-amide-hydrolyzin g activity that was markedly inhibited (93%) by the proline endopeptidase inhibitor N-benzyloxycarbonyl-Pro-Prolinal and partially blocked (25%) by an antiproline endopeptidase antiserum. In contrast, the cleavage of neurotensin at the Pro10-Tyr11 bond by synaptic membranes was not affected by N-benzyloxycarbonyl-Pro-Prolinal and the antiserum. When the conversion of NT1-10 to NT1-8 by angiotensin converting enzyme was blocked by captopril and when the processing of NT11-13 by aminopeptidase(s) was inhibited by bestatin, it was found that thiorphan, a potent endopeptidase 24.11 inhibitor, partially decreased the formation of NT1-10 and NT11-13 by synaptic membranes. In conclusion: (1) proline endopeptidase, although it is present in synaptic membranes, is not involved in the cleavage of neurotensin at the Pro10-Tyr11 bond; (2) endopeptidase 24.11 only partially contributes to this cleavage; (3) there exists in rat brain synaptic membranes a peptidase different from proline endopeptidase and endopeptidase 24.11 that is mainly responsible for inactivating neurotensin by cleaving at the Pro10-Tyr11 bond.     

Design of temperature-sensitive penicillinase repressors by replacement of Pro in predicted beta-turn structures.

Pro residues in predicted beta-turn structures were substituted with other amino acids to obtain temperature-sensitive penicillinase repressors (PenI). A mutant repressor (P70L; Pro-70 is substituted with Leu) was inactive at 48 degrees C and penP gene expression was derepressed (1,200 U/OD660 [optical density at 660 nm] ), although the mutant was still active at 30 degrees C (27 U). The heat induction ratio (penicillinase activity at 48 degrees C compared with that at 30 degrees C) of the mutant was 98 times higher than that of the wild type (i.e., 44 versus 0.45). This result indicated that the side chain of the Leu residue in P70L destroyed the proper folding of the repressor protein at the elevated temperature, whereas the Pro residue of the wild-type repressor stabilized this predicted beta-turn structure even at 48 degrees C. When the Pro residue was replaced by amino acid residues with smaller side chains (i.e., Gly and Ala), these mutant repressors were less temperature sensitive than P70L. These data suggest that the presence of the Pro residue in the beta-turn structure could be one of the key factors in stabilizing protein structure at elevated temperatures.