Discordance in diagnosis of osteoporosis using spine and hip bone densitometry

BACKGROUND: Diagnostic discordance for osteoporosis is the observation that the T-score of an individual patient varies from one key measurement site to another, falling into two different diagnostic categories identified by the World Health Organization (WHO) classification system. This study was conducted to evaluate the presence and risk factors for this phenomenon in a large sample of Iranian population. METHODS: Demographic data, anthropometric measurements, and risk factors for osteoporosis were derived from a database on 4229 patients referred to a community-based outpatient osteoporosis testing center from 2000 to 2003. Dual-energy X-ray absorptiometry (DXA) was performed on L1-L4 lumbar spine and total hip for all cases. Minor discordance was defined as present when the difference between two sites was no more than one WHO diagnostic class. Major discordance was present when one site is osteoporotic and the other is normal. Subjects with incomplete data were excluded. RESULTS: In 4188 participants (3848 female, mean age 53.4 +/- 11.8 years), major discordance, minor discordance, and concordance of T-scores were seen in 2.7%, 38.9% and 58.3%, respectively. In multivariate logistic regression analysis, older age, menopause, obesity, and belated menopause were recognized as risk factors and hormone replacement therapy as a protective factor against T-score discordance. CONCLUSION: The high prevalence of T-score discordance may lead to problems in interpretation of the densitometry results for some patients. This phenomenon should be regarded as a real and prevalent finding and physicians should develop a particular strategy approaching to these patients.     

Development and validation of the Osteoporosis Risk Assessment Instrument to facilitate selection of women for bone densitometry

BACKGROUND: Although mass screening for osteoporosis is not recommended among postmenopausal women, there is no consensus on which women should undergo testing for low bone mineral density. The objective of this study was to develop and validate a clinical tool to help clinicians identify which women are at increased risk for osteoporosis and should therefore undergo further testing with bone densitometry. METHODS: Using Ontario baseline data from the Canadian Multicentre Osteoporosis Study, we identified all cognitively normal women aged 45 years or more who had undergone testing with dual-energy x-ray absorptiometry (DXA) at both the femoral neck and the lumbar spine (L1-L4). Participants who had a previous diagnosis of osteoporosis or were taking bone active medication other than ovarian hormones were excluded. The main outcome measure was low bone mineral density (T score of 2 or more standard deviations below the mean for young Canadian women) at either the femoral neck or the lumbar spine. Logistic regression analysis and receiver operating characteristic (ROC) analysis were used to identify the simplest algorithm that would identify women at increased risk for low bone mineral density. RESULTS: The study population comprised 1376 women, of whom 926 were allocated to the development of the tool and 450 to its validation. A simple algorithm based on age, weight and current estrogen use (yes or no) was developed. Validation of this 3-item Osteoporosis Risk Assessment Instrument (ORAI) showed that the tool had a sensitivity of 93.3% (95% confidence interval [CI] 86.3%-97.0%) and a specificity of 46.4% (95% CI 41.0%-51.8%) for selecting women with low bone mineral density. The sensitivity of the instrument for selecting women with osteoporosis was 94.4% (95% CI 83.7%-98.6%). Use of the ORAI represented a 38.7% reduction in DXA testing compared with screening all women in our study. INTERPRETATION: The ORAI accurately identifies the vast majority of women likely to have low bone mineral density and is effective in substantially decreasing the need for all women to undergo DXA testing.     

X-ray densitometric characteristics of bone mineral density in patients with impaired biliation

Dual-energy X-ray absorptiometry was used to examine 20 patients with obstructive jaundice, who had undergone external biliary drainage in the first surgical stage. A clinical comparison group comprised 34 patients without hepatobiliary diseases. Bone mineral density was measured in the lumbar spine, proximal femur, and ultradistal antibrachium. Impaired biliation was found to result in bone loss in the early-stage of the disease, which was more marked in the spongy bone. This allows the ultradistal antibrachium to be identified as a main observation area for dual-energy X-ray absorptiometry to make an early diagnosis of mineralization disorders. The integrated T index (Tint) calculated on the basis of the X-ray densitometry of a few skeletal portions may be used to obtain generalized information on bone mineral density.     

Bone densitometry: assessing the effects of growth hormone treatment in adults

Dual-energy X-ray absorptiometry (DXA) is the reference method for the measurement of bone mineral mass at different skeletal sites. It has been widely used in recent years to assess the effects of growth hormone (GH) treatment on bone metabolism. In normal individuals, bone mineral content (BMC) and density (BMD), as assessed using DXA, correlate with body size. Therefore, using DXA in patients with congenital GH deficiency (GHD), who have a smaller body frame, would be expected to result in lower bone mass. Thus, comparisons with reference data derived from populations of normal body size are invalid. The evaluation of the effects of GH administration should take into account the possible effects of GH on bone size, not only in children, but also in adults. The enlargement of bone, due to stimulation of the periosteal apposition, may partially mask an increase in BMC, resulting in little or no change in BMD. The ability of GH to affect bone area therefore requires analysis of the possible changes in bone area and BMC, as well as BMD. This issue has been poorly handled in the studies published to date. Lastly, the acceleration of bone turnover induced by GH leads to an increase in bone remodelling space, which in turn is associated with a reduction in BMC and BMD, independent of the net balance between breakdown and formation in each metabolic unit. This bone loss is completely reversible when the remodelling space returns to previous levels. This phenomenon must be taken into account when analysing the effects of GH treatment on bone mass, because a net gain in bone mass may be found in long-term GH treatment or after GH discontinuation, even if bone loss was evident during the first 6 months of treatment. In conclusion, the interpretation of bone density data in patients with GHD, and after GH administration, should take into account some of the methodological aspects of bone densitometry, as well as the specific actions of GH on bone metabolism and body composition.     

Single dose of acetylsalicylic acid in patients with Type 2 diabetes mellitus and/or chronic renal failure ameliorates anaemia by decreasing the rate of neocytolysis

BACKGROUND: Anaemia in diabetes mellitus (DM) and/or chronic renal failure (CRF) may be caused by a decreased production of erythropoietin (EPO), EPO resistance, and by the lysis of the young circulating red blood cells (neocytolysis) induced by subclinical inflammation and low EPO level. Aims of this study were to detect EPO resistance in patients with DM and/or CRF and to prove, that acetylsalicylic acid (ASA) is able to improve the haemopoietic status by decreasing neocytolysis. METHODS: In a cross-sectional study, three groups of selected patients (patients with DM; patients with DM+CRF; patients with CRF without DM, n=15 each) and a group of controls (non-diabetic, nonazotemic subjects, n = 10) were compared. In the intervention part of the study, the effect of a single dose of 1 gram ASA on neocytolysis was investigated in a subgroup of these patients. RESULTS: Despite the similar EPO level (p = 1.000), all three patient groups had lower haemoglobin and haematocrit than control persons (p < 0.05 in all cases). Patients with DM+CRF had lower haemoglobin than patients with DM or CRF alone (p < 0.05). Single dose of ASA induced a fast increase in serum EPO level, a concomitant rise of the Rtc number and rate, red blood cell count, haematocrit and haemoglobin p < 0.01 for each). These changes were accompanied by a marked decrease in serum lactate dehydrogenase activity (p < 0.01). CONCLUSIONS: DM and CRF may induce erythropoietin resistance. In these patients, ASA treatment increases serum EPO level. The higher EPO level and the anti-inflammatory effect of ASA may decrease neocytolysis.     

Cross-sectional structural parameters from densitometry

Bone densitometry has previously been used to obtain cross-sectional properties of bone from a single X-ray projection across the bone width. Using three unique projections, we have extended the method to obtain the principal area moments of inertia and orientations of the principal axes at each scan cross-section along the length of the scan. Various aluminum phantoms were used to examine scanner characteristics to develop the highest accuracy possible for in vitro non-invasive analysis of cross-sectional properties. Factors considered included X-ray photon energy, initial scan orientation, the angle spanned by the three scans (included angle), and I(min)/I(max) ratios. Principal moments of inertia were accurate to within +/-3.1% and principal angles were within +/-1 degrees of the expected value for phantoms scanned with included angles of 60 degrees and 90 degrees at the higher X-ray photon energy (140 kVp). Low standard deviations in the error (0.68-1.84%) also indicate high precision of calculated measurements with these included angles. Accuracy and precision decreased slightly when the included angle was reduced to 30 degrees. The method was then successfully applied to a pair of excised cadaveric tibiae. The accuracy and insensitivity of the algorithms to cross-sectional shape and changing isotropy (I(min)/I(max)) values when various included angles are used make this technique viable for future in vivo studies.     

Allele-frequency determination of BsmI and FokI polymorphisms of the VDR gene by quantitative real-time PCR (QRT-PCR) in pooled genomic DNA samples

The vdr gene is a candidate for osteoporosis susceptibility, with conflicting results in association studies. We have designed and optimized an individual allele-specific and DNA pooling PCR-based methodology to quantitate BsmI and FokI polymorphisms of the vdr gene and studied single-nucleotide polymorphisms (SNPs) from pooled DNA samples. The allele frequency in DNA pooling experiments has been analyzed by kinetic PCR: quantitative real-time PCR (QRT-PCR). A Spanish cohort of 225 healthy postmenopausal women was studied. Bone mineral density (BMD) was measured by dual-energy X-ray absorptiometry (DEXA) and quantitative ultrasound calcaneous densitometry. Allele-specific PCR amplification of BsmI and FokI genes showed full concordance with the PCR-RFLP approach. The prevalence of the three BsmI VDR genotypes was 19.1, 44.9 and 36.0% for BB, Bb and bb, respectively. In the case of the FokI locus, the prevalence of genotypes was 40.4, 48.0 and 11.6% for FF, Ff and ff, respectively. No positive correlation was found between polymorphism and BMD. The DNA pooling procedure was validated. No differences were found in allele frequencies and T-score data obtained using the high throughput DNA pooling approach, as compared to known individual frequencies. In our hands, this is a very useful approach to study quantitative (thus polygenic) traits like osteoporosis susceptibility.     

Quantitative evaluation by computer-based video densitometry of film response to different isotopes and fluorographic treatments

Previous investigations of fluorographic methods have generally reported the minimum level of radioactivity that can be detected for a given length of exposure or the amount of radioactivity needed to reach a given optical density value. Even when the full characteristic curve is given, comparisons with other published values are difficult or, if different lengths of exposures are used, impossible. Computer-based video densitometry was used to evaluate different fluorographic methods. Sections of polyacrylamide gels with uniform distributions of either 35S or 125I radioactivity were embedded with different fluors and used to expose X-ray film for various lengths of time. Due to its compatibility with algorithms used in densitometry, the effectiveness of various treatments was evaluated by fitting relevant parameters to a modified Hill-type equation. The two parameters that were affected by treatments were the amount of radioactivity needed to half-saturate the film (ED50, or the midpoint) and the slope at the midpoint. The relationship between length of exposure and film density was investigated. Since the ED50 values for both 35S and 125I were found to vary in a linear fashion with respect to 1/time, one can determine the ED50 for lengths of exposure not reported. A unique feature of this method of evaluating effectiveness of different treatments, therefore, is that it is possible to compare films that were exposed for different lengths of time. The method of presenting data used here overcomes many of the difficulties in comparing different fluorographic and film treatments, is compatible with the needs of computer-based densitometry, and is suggested as a useful way in which to present the relationship among isotopes, fluors, and films.     

Neutron imaging versus standard X-ray densitometry as method to measure tree-ring wood density

Neutron imaging is a new non-destructive testing method in wood science. It is similar to X-ray methods but with differing sensitivities for different elements. In this study, neutron imaging was used to ascertain the density profiles of thin spruce samples and compared with results generated with standard X-ray microdensitometry. Data obtained through neutron imaging were similar to those resulting from the X-ray method. The advantage of neutron imaging is its higher sensitivity to some elements such as hydrogen. Together with the high neutron-sensitivity of the applied detectors (imaging plates) this makes shorter exposure times possible, and yields more detailed information on the inner composition of wood. X-ray film, which is still most commonly used in X-ray densitometry, has the disadvantage that the relationship between the optical density of the film and the density of wood is non-linear. This means that corrections and calibration with step wedges are necessary, whereas with neutron imaging the digital values can be used directly to calculate the density at a certain point of the specimen. Thus neutron imaging appears to be an appropriate method, which can be used as complement to established X-ray methods for fast and straightforward investigations of tree rings, growth zones and wood density.     

Near‐infrared bone densitometry: A feasibility study on distal radius measurement

Osteoporosis, defined as decreased bone mineral density (BMD), poses patients in dangers for fracture risk and has become a major public health problem worldwide because of is associated morbidity, mortality and costs. Without doubt, early detection and timely intervention are important to successfully manage osteoporosis and its associated complications. The dual‐energy x‐ray absorptiometry (DXA) is the most popular and standard method to measure BMD. However, limitations including radiation exposure and availability restrict its application for osteoporosis screening among general population. In this study, we developed a simple method to detect human distal radius bone density based on near infrared (NIR) image system. Among 10 volunteers (including 5 young and 5 elderly participants) receiving bone density measurement using our NIR image system at the ultradistal part of bilateral distal radius, we demonstrated a strong correlation between the optical attenuation and BMD measured with DXA, which may facilitate predicting bone density status. We hope our potential NIR image system may open a new avenue for development of osteoporosis screening facilities and help in prevention of osteoporosis related fracture and its associated complications in the near future. Pearson's correlations between BMD values from the DXA and light intensity of NIR system.      

Treatment of osteoporosis with human parathyroid peptide and observations on effect of sodium fluoride.

OBJECTIVE--To evaluate the need for a randomised study of treatment of spinal osteoporosis with human parathyroid peptide in the secondary prevention of crush fractures; to study the effect of human parathyroid hormone peptide 1-34 plus sex hormones on vertebral body cancellous bone; and, separately, to determine the effect of relatively low doses of sodium fluoride plus calcium on spinal bone mineral density. DESIGN--Open study of patients with primary or postmenopausal osteoporosis. All patients had serial bone densitometry of the spine by quantitative computed tomography and dual photon absorptiometry as well as serial densitometry of the radial midshaft (cortical) and radial distal (trabecular) bone by quantitative computed tomography. Changes in the spinal bone not forming the spongiosa of the vertebral bodies ("cortical" bone) were determined from the difference between the two axial measurements, after correction to the same units of measurement. SETTING--Northwick Park Hospital and Medical Research Council Clinical Research Centre. PATIENTS--24 Patients who fulfilled the conventional criteria for type 1 (vertebral) osteoporosis not secondary to recognised causes other than sex hormone deficiency and with at least one crush or wedge vertebral fracture and a spinal bone density (quantitative computed tomography) less than 80 mg/cm3 or two or more fractures. Twelve patients received human parathyroid peptide and 12 sodium fluoride; they were not randomised. MAIN OUTCOME MEASURES--Trends in axial and peripheral bone mass values determined by linear, time dependent regression analyses. RESULTS--The patients receiving the peptide showed a substantial increase in vertebral spongiosa (mean 25.6 mg/cm2 two years after the start of treatment). No significant changes were seen in spinal cortical or radial bone density. The patients receiving sodium fluoride showed roughly equal increases in cancellous and cortical bone over the same period (mean increase in vertebral spongiosa 16.1 mg/cm3). No significant changes were seen in radial bone. CONCLUSIONS--Treatment of postmenopausal women with human parathyroid peptide selectively increases spinal cancellous bone density by amounts that may prove useful in secondary prevention. Peptide treatment should now be tested in a randomised study in which the important end point is prevention of fractures as the usefulness of sodium fluoride in this context is doubtful.     

Assessment of muscle and fat mass in type 2 diabetes patients by dual-energy X-ray absorptiometry

Objectives:The aim of this study was to assess the quantitative composition of muscle and adipose tissue in type 2 diabetes mellitus (T2DM) patients on the basis of dual-energy X-ray absorptiometry for the diagnosis of obesity and sarcopenia.Methods:Dual-energy X-ray absorptiometry was administered to 50 patients with T2DM. Evaluation of the composition of muscle and adipose tissue was performed.Results:The median of Appendicular Lean Mass Index (ALMI) in the general group was 8.04 [7.32; 8.97]. In general, there was a decrease in the appendicular muscle mass with increasing age. According to the results of T-score ALMI and Z-score ALMI, we did not identify patients with sarcopenia. However, the calculation of the T- and Z-criteria, adjusted for fat mass, led to a significant decrease of these parameters and in 98.0% it was possible to identify patients who meet the criteria of sarcopenia.Conclusion:We did not detect patients with sarcopenia on the basis of ALMI, T-ALMI. After revision of these criteria for fat mass, almost all patients started to meet the criteria of sarcopenia (98.0%).     

The relation between forearm and vertebral mineral density and fractures in postmenopausal women

Vertebral and forearm mineral density (VMD and FMD, respectively) were determined in 124 postmenopausal women with no crushed vertebrae or peripheral fractures, 51 who had sustained peripheral fractures only since the menopause, 62 with vertebral compression(s) only and 75 with both types of fracture.There was a very significant correlation between the two measurements in the whole set. The scatter could not be accounted for by methodological error but was partly accounted for by body weight, since VMD was related to body weight and FMD was not. Whatever criterion was used for the diagnosis of osteoporosis (whether fracture or density) the percentage of misclassified cases was very similar by the two methods. However, VMD was relatively more reduced than FMD in vertebral fracture cases and FMD was marginally more reduced than VMD in peripheral fracture cases.There is little to choose between vertebral and forearm density in the diagnosis of osteoporosis but vertebral densitometry is slightly superior to forearm densitometry in describing the severity of osteoporosis in vertebral fracture patients.     

Measuring bone mass in children: can we really do it?

Bone densitometry is used to assess skeletal health in clinical and research settings, with the goal of achieving reproducible measurements of bone mass that help to identify individuals predisposed to fracture. The search is now on for better methods of capturing additional factors that contribute to bone strength, including bone size, geometry, microarchitecture, and turnover rates. This has proved particularly challenging in growing children, whose bones continually change in size, shape, and mass. Dual energy X-ray absorptiometry is the preferred method for measuring bone mass in children, but the technique has several limitations, and interpreting the findings can be problematic. Peripheral quantitative computed tomography is a promising method for assessing bone mass and other indices correlating with bone strength, but a lack of precision and paediatric norms currently restricts its clinical utility. Although bone mineral density is predictive of future fracture risk in adults, the evidence in children is less conclusive, and a diagnosis of osteoporosis in a child should not be made on densitometric findings alone. Developing a clearer understanding of how measures of bone mass and strength correlate with bone fracture in children will help target preventive strategies for those in greatest need.     

The use of X-ray densitometry to evaluate the wood density profile of Tectona grandis trees growing in fast-growth plantations

Tectona grandis (teak) is an important commercial tree species that is widely used in tropical dendrochronology due to the formation of climate-sensitive annual growth rings. However, young trees growing in plantation conditions exhibit poor ring visibility during the first years of growth, limiting the dendrochronology application. In the present study, we use x-ray densitometry to determine the wood density profile between and within annual rings and at the sapwood-heartwood boundary in trees from fast-growth plantations. The resulting wood density profiles (WDP) can be categorized as uniform, stable growth, unstable growth, and false. The annual ring boundaries were indistinct in trees less than 8 years old. In mature trees, the annual ring boundaries are more defined. In relation to the sapwood-heartwood boundary, the WDP showed a decrease in the wood density; however, this decrease is influenced by the annual ring boundary when the two boundaries coincide. The identification of annual rings in trees growing in fast-growth plantations should be combined with X-ray densitometry and visual identification if wood density data are necessary for deriving other analysis, as climate change, from annual ring.     

The application of finite element modelling based on clinical pQCT for classification of fracture status

Biomechanics and Modeling in Mechanobiology - Fracture risk assessment using dual-energy X-ray absorptiometry (DXA) frequently fails to diagnose osteoporosis amongst individuals who later...     

Evaluation of X-ray densitometry to identify tree-ring boundaries of two deciduous species from semi-arid forests in Brazil

The presence of visible annual rings in semi-arid tropical trees may allow the application of dendrochronological methods. However, variation in water availability may cause the formation of narrow, irregular ill- or non-defined annual rings hindering the correct dating of tree-ring series. We aimed to evaluate X-ray densitometry as a method to identify tree rings of two deciduous tree species from the Caatinga forest, a semi-arid region in the northeast of Brazil, and compare with two other methods commonly used in dendrochronology, the sliding-stage micrometer and image analysis. Xylem was observed macro- and microscopically and wood anatomical features were assessed in Aspidosperma pyrifolium and Poincianella pyramidalis trees. In both species, tree-ring boundaries were identified considering intra-annual density patterns and wood anatomical features. No significant differences in tree-ring widths were found among methods. X-ray densitometry measurements showed a positive correlation with the measurements obtained with image analysis and sliding-stage micrometer in A. pyrifolium and P. pyramidalis, revealing the high reliability of the methods used. However, inter-correlation of tree-ring width series showed differences in the accuracy of crossdating across measuring methods. The maximum, mean and minimum density values were species-dependent, with mean wood density of A. pyrifolium lower than P. pyramidalis. Our results highlight X-ray densitometry as an important and complementary tool to identify tree-rings boundaries in semi-arid tree species, especially in A. pyrifolium. Along with other measuring methods, it may provide higher accuracy in dendrochronological studies in semi-arid or subtropical environments.     

Low-cost two-dimensional gel densitometry

A major obstacle to full utilization of the powerful technique of two-dimensional (2-D) gel electrophoresis is the expense and complexity of quantifying the results. Using an analog-to-digital converter already present in the widely available Commodore 64 or Commodore 128 microcomputer, we have developed a 2-D gel densitometer (GELSCAN) which adds only $20.00 to the cost of the Commodore system (currently around $700.00). The system is designed to work with autoradiograms of 2-D gels. Spots of interest are identified visually and then positioned manually over a light source. A pinhole photoelectric sensor mounted in a hand-held, Plexiglas holder, or "mouse," is briefly rubbed over each spot. Maximum density of the spot is determined and its value is converted to counts per minute via an internal calibration curve which corrects for the nonlinear response of film to radiation. Local spot backgrounds can be subtracted and values can be normalized between gels to adjust for variation in amount of radioactivity applied or in exposure time. Reproducibility is excellent and the technique has some practical as well as theoretical advantages over other more complicated approaches to 2-D gel densitometry. In addition, the GELSCAN system can also be used for scanning individual bands in 1-D gels, quantitation of "dot-blot" autoradiograms and other tasks involving transmission densitometry.     

Linkage disequilibrium detected between dystrophia myotonica and APOC2 locus in the Finnish population

Summary Three polymorphic loci APOC2, CKMM and p134C were used to haplotype 15 Finnish dystrophia myotonica (DM) families representing about one third of all DM patients in this isolated population. Compound APOC2 and CKMM haplotypes reveal linkage disequilibrium: 90% of DM chromosomes co-occur with the haplotypes that occur in 31% of normal chromosomes only. The same disequilibrium is present when only polymorphisms occurring at the APOC2 locus are used. Surprisingly, no statistically significant linkage disequilibrium was discovered at the CKMM locus alone. Of the meiotic events, 84% were informative when both APO2 and CKMM loci were used. When studied selectively, 60% of meiotic events were informative at the APOC2 locus, whereas CKMM alone resulted in 65% meiotic informativeness. The distal marker p134C was found to have an unfortunately low information content in our population.     

Atrophic Gastritis: A Related Factor for Osteoporosis in Elderly Women

Purpose

Osteoporosis poses a great threat to the aging society. Hypochlorhydric or achlorhydric conditions are risk factors for osteoporosis. Atrophic gastritis also decreases gastric acid production; however, the role of atrophic gastritis as a related factor for osteoporosis is unclear. We investigated the relationship between atrophic gastritis and osteoporosis in postmenopausal women over 60 years of age.

Subjects and Methods

A total of 401 postmenopausal women were included in this cross-sectional study, which was conducted during their medical check-ups. Bone mineral densitometry was measured using a dual energy X-ray absorptiometry. Atrophic gastritis was defined endoscopically if gastric mucosa in the antrum and the body were found to be atrophied and thinned and submucosal vessels could be well visualized.

Results

The proportion of people with atrophic gastritis was higher in the osteoporotic group than in the group without osteoporosis. A linear relationship was observed in the proportion of atrophic gastritis according to the categories of normal, osteopenia, and osteoporosis at the lumbar spine (p for trend = 0.039) and femur (p for trend = 0.001). A multiple logistic regression analysis revealed that the presence of atrophic gastritis was associated with an increased odds of osteoporosis after adjusting for age, body mass index, triglyceride, high-density lipoprotein cholesterol, alcohol consumption, and smoking status (odds ratio 1.89, 95% confidence interval 1.15–3.11).

Conclusions

Atrophic gastritis is associated with an increased likelihood of osteoporosis in Korean elderly women.