Characteristics of bioemulsifier V2-7 synthesized in culture media added of hydrocarbons: chemical composition, emulsifying activity and rheological properties

The bioemulsifier V2-7 is an exopolysaccharide (EPS) synthesized by strain F2-7 of Halomonas eurihalina and it has the property of emulsifying a wide range of hydrocarbons i.e. n-tetradecane, n-hexadecane, n-octane, xylene mineral light and heavy oils, petrol and crude oil. Characteristics of exopolysaccharide V2-7 produced in media supplemented with various hydrocarbons (n-tetradecane, n-hexadecane, n-octane, xylene, mineral light oil, mineral heavy oil, petrol or crude oil) were studied. Yield production varied from 0.54 to 1.45 g L(-1) according to the hydrocarbon added, in the same way chemical composition, viscosity and emulsifying activity of EPS varied with the culture conditions. Respect to chemical composition, percentage of uronic acids found in exopolymers produced in hydrocarbon media was always higher than that described for V2-7 EPS (1.32%) obtained with glucose. This large amount of uronic acid present could be useful in biodetoxification and waste water treatment. On the other hand, the highest amount of biopolymer was synthesized with mineral light oil, while the most active emulsifiers were those obtained from media added with petrol and n-octane. Furthermore, all EPS were capable of emulsifying crude oil more efficiently than the three chemical surfactants tested as control (Tween 20, Tween 80 and Triton X-100). The capacity of strain F2-7 to grow and produce bioemulsifier in presence of oil hydrocarbons together with the high emulsifying activity and low viscosity power of the biopolymers synthesized in hydrocarbons media could be considered highly beneficial for application of both bioemulsifier and producing strain in bioremediation of oil pollutants.     

Efficiency of the EPS emulsifier produced by <Emphasis Type="Italic">Ochrobactrum anthropi</Emphasis> in different hydrocarbon bioremediation assays

Ochrobactrum anthropi strain AD2 was isolated from the waste water treatment plant of an oil refinery and was identified by analysis of the sequence of the gene encoding 16S rDNA. This bacterium produced exopolysaccharides in glucose nutrient broth media supplemented with various hydrocarbons (n-octane, mineral light and heavy oils and crude oils). The exopolysaccharide AD2 (EPS emulsifier) synthesized showed a wide range of emulsifying activity but none of them had surfactant activity. Yield production varied from 0.47 to 0.94 g of EPS l⁻¹ depending on the hydrocarbon added. In the same way, chemical composition and emulsification activity of EPS emulsifier varied with the culture conditions. Efficiency of the EPS emulsifier as biostimulating agent was assayed in soil microcosms and experimental biopiles. The AD2 biopolymer was added alone or combined with commercial products frequently used in oil bioremediation such as inorganic NPK fertilizer and oleophilic fertilizer (S200 C). Also, its efficiency was tested in mixture with activated sludge from an oil refinery. In soil microcosms supplemented with S200 C + EPS emulsifier as combined treatment, indigenous microbial populations as well as hydrocarbon degradation was enhanced when compared with microcosms treated with NPK fertilizer or EPS emulsifier alone. In the same way EPS emulsifier stimulated the bioremediation effect of S200 C product, increasing the number of bacteria and decreasing the amount of hydrocarbon remained. Finally, similar effects were obtained in biopile assays amended with EPS emulsifier plus activated sludge. Our results suggest that the bioemulsifier EPS emulsifier has interesting properties for its application in environment polluted with oil hydrocarbon compounds and may be useful for bioremediation purposes.     

Characteristics of bioemulsifiers synthesised in crude oil media by <Emphasis Type="Italic">Halomonas eurihalina</Emphasis> and their effectiveness in the isolation of bacteria able to grow in the presence of hydrocarbons

Halomonas eurihalina strains F2-7, H28, H96, H212 and H214 were capable of producing large amounts of exopolysaccharides (EPS) in MY medium with added crude oil. The biopolymers showed lower carbohydrate and protein content than those synthesised in control medium without oil. Nevertheless, the percentages of uronic acids, acetyls and sulphates were higher. The emulsifying activity of biopolymers was measured; crude oil was the substrate most efficiently emulsified. Furthermore, all the EPS tested emulsified higher volumes of crude oil than the commercial surfactants used as controls. We have also proved the effectiveness of both Halomonas eurihalina strains and their EPS to select indigenous bacteria able to grow in the presence of polycyclic aromatic hydrocarbons (naphthalene, phenanthrene and pyrene) from waste crude oil. The majority of isolated strains belonged to the genus Bacillus.     

Bacterial exopolysaccharides produced by newly discovered bacteria belonging to the genus Halomonas, isolated from hypersaline habitats in Morocco

We have studied the exopolysaccharides (EPS) from a new group of moderately halophilic bacteria belonging to the genus Halomonas. The quantity of EPS produced, its chemical composition and physical properties depend greatly upon the bacterial strain. The majority of the polymers produced viscous solutions and/or emulsified different hydrocarbon compounds. The most interesting strain, S-30, produced EPS at 2.8 g/l with a maximum viscosity of 23.5 Pa·5 and exhibited pseudoplastic behavior. This EPS emulsified five hydrocarbons more efficiently than did four control surfactants tested. Its monosaccharide composition was glucose:galactose:manose:glucuronic acid in equimolar ratio. Some two-thirds of the strains tested emulsified crude oil better than control surfactants did. There are many potential industrial applications for polysaccharides with these qualities. Journal of Industrial Microbiology & Biotechnology (2000)24, 374–378. Received 09 August 1999/ Accepted in revised form 23 March 2000     

Production and characterization of a new bioemulsifier from Pseudomonas putida ML2

AIMS: To characterize the bioemulsifier produced by a nonfluorescent strain of Pseudomonas putida isolated from a polluted sediment and to determine the influence of pH, temperature, media composition, and carbon and nitrogen source on growth and emulsifying activity. METHODS AND RESULTS: Different indexes were employed to determine the emulsifying properties of culture supernatants of P. putida ML2 in defined and complex media. Surface tension of cell-free supernatants was measured. Purification and chemical analysis of the emulsifier was performed. Confirmed results indicate that a polysaccharide with hexasaccharide repeating units is responsible for the emulsifying activity in a mineral medium with glucose as sole carbon source. Moreover, an emulsifier is produced when growing on naphthalene. CONCLUSIONS: Culture media composition influences the amount and the properties of the emulsifier produced by this P. putida strain. Under nitrogen limiting conditions, a polysaccharide is responsible for the emulsifying activity in defined mineral media. In complex nitrogen rich medium, a different kind of emulsifier is produced. The exopolymer may contribute to hydrocarbons solubilization. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first exopolysaccharide with emulsifying properties produced by a Pseudomonas strain reported to the present. Also chemical composition is significantly different from previous reports. This strain has potential use in bioremediation and the purified polysaccharide may be used in food and cosmetic industry. Moreover, the production of the exopolymer may play a role on biofilm formation.     

Hydrocarbon emulsification and enhanced crude oil degradation by lauroyl glucose ester

Enzymatically synthesized lauroyl glucose emulsified different hydrophobic substrates when assayed spectrophotometrically. Stable emulsions were formed with triglycerides as well as with hydrocarbons. There was a linear relation between the concentration of lauroyl glucose (50-450 microg) and emulsification activity under the assay conditions when tested with aromatic and aliphatic hydrocarbons. This sugar ester was able to emulsify the aromatic hydrocarbons benzene, toluene and xylene. Long chain alkanes (n-decane and n-hexadecane) as well as brominated long chain alkanes (1-bromodecane and 1-bromohexadecane) were efficiently emulsified. The effect of lauroyl glucose ester on degradation of crude oil by a known oil-degrading Rhodococcus species was also investigated. The culture showed enhanced degradation of crude oil when lauroyl glucose ester was used as an emulsifier. It degraded 70% of the aliphatic fraction of Bombay High crude oil in the presence of the sugar ester at a concentration of 200mg l(-1) as compared to 50% without the emulsifier.     

An antarctic psychrotrophic bacterium Halomonas sp. ANT-3b, growing on n-hexadecane, produces a new emulsyfying glycolipid

A bacterial strain ANT-3b was isolated at the sea-ice seawater interface from Terra Nova Bay station, Ross Sea, Antarctica. It was isolated on mineral medium supplemented with 2% diesel fuel as a sole carbon and energy source and grown routinely on 2% n-hexadecane. Analysis of 16S rRNA gene sequence indicates that the strain has 99.8% sequence similarity with Halomonas neptunia. The strain ANT-3b was grown in mineral medium supplemented with n-hexadecane between 4 and 20 degrees C, but not at 30 degrees C. The maximum degradation rate of the n-alkane was measured at 15 degrees C, with 5.6+/-1.7 mg O2 microg(-1) protein d(-1). The strain ANT-3b produced emulsifying compounds when grown on n-hexadecane, but not on mineral medium supplemented with D-fructose. A preliminary characterisation of the emulsifier was carried out. The lipid moiety contained a mixture of fatty acids with a following composition in molar ratio: caprylic acid 18.85, myristic acid 1.0, palmitic acid 9.68, palmitoleic acid 5.69 and oleic acid 1.26. The polysaccharide moiety also contained a mixture of sugars with the following molar ratio: mannose 1.71, galactose 1.00 and glucose 2.96. The molecular weight of the glycolipid component determined by gel permeation chromatography was in the 18 kDa range and contained smaller fragments, possibly oligomeric contaminants. Transmission electron microscopy showed contact between the glycolipid secreted by the strain and n-hexadecane broken down to nanodroplets at the water interface, to form a material with mesophase (liquid crystal) organisation.     

Production of bioemulsifier by Bacillus subtilis, Alcaligenes faecalis and Enterobacter species in liquid culture

Three bacterial strains isolated from waste crude oil were selected due to their capacity of growing in the presence of hydrocarbons and production of bioemulsifier. The genetic identification (PCR of the 16S rDNA gene using fD1 and rD1 primers) of these strains showed their affiliation to Bacillus subtilis, Alcaligenes faecalis and Enterobacter sp. These strains were able to emulsify n-octane, toluene, xylene, mineral oils and crude oil, look promising for bioremediation application. Finally, chemical composition, emulsifying activity and surfactant activity of the biopolymers produced by the selected strains were studies under different culture conditions. Our results showed that chemical and functional properties of the bioemulsifiers were affected by the carbon source added to the growth media.     

Clarified cashew apple juice as alternative raw material for biosurfactant production by Bacillus subtilis in a batch bioreactor

Clarified cashew apple juice was evaluated as carbon source for surfactin production by Bacillus subtilis LAMI005 isolated from the tank of chlorination at the Wastewater Treatment Plant on Campus do Pici (WWTP-PICI) in the Federal University of Ceará, Brazil. The highest surfactin concentration using clarified cashew apple juice (CCAJ) supplemented with mineral medium (MM-CCAJ) was 123 mg/L, achieved after 48 h of fermentation. Almost 2-fold less than the amount produced using mineral medium supplemented with 10 g/L of glucose and 8.7 g/L of fructose (MM-GF). However, critical micelle concentration of the biosurfactants produced using MM-CCAJ was 2.5-fold lower than the one produced using MM-GF, which indicates it is a more efficient biosurfactant. Surface tension decreased from 38.50 ± 0.0 to 29.00 ± 0.0 dyne/cm when B. subtilis was grown on MM-CCAJ media (24.68% of reduction on surface tension) and remained constant up to 72 h. Emulsification index was 51.15 and 66.70% using soybean oil and kerosene, respectively. Surfactin produced in MM-CCAJ showed an emulsifying activity of, respectively, 1.75 and 2.3 U when n-hexadecane or soybean oil was tested. However, when mineral medium supplemented with 10 g/L of glucose (MM-G) was used an emulsifying activity of 2.0 and 1.75 U, with n-hexadecane and soybean oil, respectively, was obtained. These results indicate that it is feasible to produce surfactin from CCAJ, a renewable and low-cost carbon source.     

Curdlan-like exopolysaccharide production by <Emphasis Type="Italic">Cellulomonas flavigena</Emphasis> UNP3 during growth on hydrocarbon substrates

Cellulomonas flavigena UNP3, a natural isolate from vegetable oil contaminated soil sample has been studied for growth associated exopolysaccharide (EPS) production during growth on glucose, groundnut oil and naphthalene. The EPS showed matrix formation surrounding the cells during scanning electron microscopy. Cell surface hydrophobicity and emulsifying activity studies confirmed the role of EPS as bioemulsifier. Emulsifying activity was found to increase with time (0.2 U/mg for 10 min to 0.27 U/mg for 30 min). Emulsification index, E₂₄ value increased with the increase in EPS concentration. Degradation of polyaromatic hydrocarbons was confirmed using gas chromatography analysis. FTIR analysis showed presence of characteristic absorbance at 895.10 cm⁻¹ for β-configuration of glucan. NMR studies also revealed EPS produced by C. flavigena UNP3 as a linear β-1, 3-d-glucan, and a curdlan like polysaccharide.     

Emulsifying behaviour and rheological properties of the extracellular polysaccharide produced by Pseudomonas oleovorans grown on glycerol byproduct

The functional properties of a novel extracellular polysaccharide (EPS) produced by Pseudomonas oleovorans grown on glycerol byproduct, generated by the biodiesel industry, were investigated. The EPS is a high molecular weight (4.6 × 10⁶) heteropolysaccharide, composed by neutral sugars (galactose, 68%; mannose, 17%; glucose, 13%; rhamnose, 2%; fucose, 4%) and acyl groups (3.04%). This biopolymer has pseudoplastic fluid behaviour in aqueous media. The apparent viscosity was stable for the pH range 2.9–7.1 and NaCl concentrations up to 1.0 M. Though the apparent viscosity decreased at high temperatures, at alkaline conditions and at NaCl concentrations of 2.0 M, pseudoplastic fluid behaviour was retained. The EPS was capable of stabilizing water emulsions with several hydrophobic compounds, including hydrocarbons, vegetable and mineral oils. It retained its emulsifying activity during exposure to wide temperature (30–50 °C) and pH (2–12) variations, as well as to the presence of NaCl at concentrations as high as 2.0 M.     

Effect of cations, pH and sulfate content on the viscosity and emulsifying activity of the Halomonas eurihalina exopolysaccharide

The effects of monovalent and divalent cations on the rheological behavior of Halomonas eurihalina exopolysaccharide (EPS) were studied. Sodium, potassium, magnesium and calcium were added and the relative abilities to increase viscosity were as follows: KCl > NaCl > MgCl₂ > CaCl₂. The highest viscosity value was measured in acidic 10⁻⁴ M KCl, in which a gel formed. A loss of sulfate content seemed to correlate with the increase of viscosity. H. eurihalina produced EPS in all growth media. Addition of hydrophobic substrates to culture media produced changes in chemical composition and emulsifying activity of the EPS. Xylene was the most effectively emulsified substance and the EPS produced on tetradecane and on corn oil the most active emulsifier. Received 25 July 1997/ Accepted in revised form 30 January 1998     

Production of biosurfactant and antifungal compound by fermented food isolate Bacillus subtilis 20B

A biosurfactant producing strain, Bacillus subtilis 20B, was isolated from fermented food in India. The strain also showed inhibition of various fungi in in-vitro experiments on Potato Dextrose Agar medium. It was capable of growth at temperature 55 degrees C and salts up to 7%. It utilized different sugars, alcohols, hydrocarbons and oil as a carbon source, with preference for sugars. In glucose based minimal medium it produced biosurfactant which reduced surface tension to 29.5 mN/m, interfacial tension to 4.5 mN/m and gave stable emulsion with crude oil and n-hexadecane. The biosurfactant activity was stable at high temperature, a wide range of pH and salt concentrations for five days. Oil displacement experiments using biosurfactant containing broth in sand pack columns with crude oil showed 30.22% recovery. The possible application of organism as biocontrol agent and use of biosurfactant in microbial enhanced oil recovery (MEOR) is discussed.     

Hydrocarbon accumulation by picocyanobacteria from the Arabian Gulf

AIMS: The objective of this work was to study picocyanobacteria in the Arabian Gulf water in relation to oil pollution. METHODS AND RESULTS: Epifluorescent microscopic counting showed that offshore water samples along the Kuwaiti coast of the Arabian Gulf were rich in picocyanobacteria which ranged in numbers between about 1 x 10(5) and 6 x 10(5) ml(-1). Most dominant was the genus Synechococcus; less dominant genera were Synechocystis, Pleurocapsa and Dermocarpella. All isolates grew well in an inorganic medium containing up to 0.1% crude oil (w/v) and could survive in the presence of up to 1% crude oil. Hydrocarbon analysis by gas liquid chromatography (GLC) showed that representative strains of the four genera had the potential for the accumulation of hydrocarbons (the aliphatic n-hexadecane, aromatic phenanthrene and crude oil hydrocarbons) from aqueous media. Electron microscopy showed that the cells of these strains appeared to store hydrocarbons in their inter thylakoid spaces. Analysis by GLC of constituent fatty acids of total lipids and individual lipid classes from representative picoplankton strains grown in the absence and presence of hydrocarbons showed, however, that the fatty acid patterns were not markedly affected by the hydrocabon substrates, meaning that the test strains could not oxidize the accumulated hydrocarbons. CONCLUSION: The Arabian Gulf is among the water bodies of the world richest in picocyanobacteria. These micro-organisms accumulate hydrocarbons from the water body, but do not biodegrade these compounds. It is assumed that hydrocarbon-utilizing bacteria that were always found associated with all picocyanobacteria in nature may carry out the biodegradation of these compounds. SIGNIFICANCE AND IMPORTANCE OF THE STUDY: The results shed light on the potential role of picocyanobacteria in controlling marine oil pollution.     

Selection and identification of bacteria isolated from waste crude oil with polycyclic aromatic hydrocarbons removal capacities

Fifteen bacterial strains isolated from solid waste oil samples were selected due to their capacity of growing in the presence of hydrocarbons. The isolates were identified by PCR of the 16S rDNA gene using fD1 and rD1 primers. The majority of the strains belonged to genera Bacillus, Bacillus pumilus (eight strains) and Bacillus subtilis (two strains). Besides, three strains were identified as Micrococcus luteus, one as Alcaligenes faecalis and one strain as Enterobacter sp. Growth of the above-mentioned strains in mineral liquid media amended with naphthalene, phenanthrene, fluoranthene or pyrene as sole carbon source was studied and our results showed that these strains can tolerate and remove different polycyclic aromatic hydrocarbons that may be toxic in the environment polluted with hydrocarbons. Finally, the capacity of certain strains to emulsify octane, xilene, toluene, mineral oil and crude oil, and its ability to remove hydrocarbons, look promising for its application in bioremediation technologies.     

Screening and Evaluation of Biosurfactant-Producing Strains Isolated from Oilfield Wastewater

The six biosurfactant-producing strains, isolated from oilfield wastewater in Daqing oilfield, were screened. The production of biosurfactant was verified by measuring the diameter of the oil spreading, measuring the surface tension value and emulsifying capacity against xylene, n-pentane, kerosene and crude oil. The experimental result showed three strains (S2, S3, S6) had the better surface activity. Among the three strains, the best results were achieved when using S2 strain. The diameter of the oil spreading of the biosurfactant produced by S2 strain was 14 cm, its critical micelle concentration (CMC) was 21.8 mg/l and the interfacial tension between crude oil and biosurfactant solution produced by S2 strain reduced to 25.7 mN/m. The biosurfactant produced by S2 strain was capable of forming stable emulsions with various hydrocarbons, such as xylene, n-pentane, kerosene and crude oil. After S2 strain treatment, the reduction rate of oil viscosity was 51 % and oil freezing point reduced by 4 °C.     

贝莱斯芽孢杆菌B6强化驱油机制分析及在高矿化度油藏中的应用

【目的】筛选油藏内源功能微生物并探究其驱油机理,现场试验以确定油藏内源微生物提高原油采收技术应用的工艺和技术可行性。【方法】采集英东油田样品,利用原油平板筛选驱油功能菌,评价其环境适应性并优化培养条件,通过乳化性能、降黏防蜡和烃转化能力等评估其驱油性能并探索其潜在机制,并在油田现场进行微生物强化驱油试验。【结果】从油水样品中分离到的贝莱斯芽孢杆菌(Bacillus velezensis) B6,其乳化活性指数(emulsifying activity index, EI24)值为100.00%,降黏率为97.20%,防蜡率为86.90%,表明菌株B6具有良好的乳化降黏性能,具有提高原油采收的潜力,并且能够减少原油中的重质组分而增加轻质烃类,改善原油物性,提升原油品质。进一步在英东油田、跃进油田和花土沟油田进行微生物单井吞吐和清防蜡作业,共进行62井次现场试验,累计增油1 460.36 t,平均延长洗井周期47 d,经济效益为342.50万元,投入产出比为1:4。【结论】通过室内研究和现场试验,证实内源微生物Bacillus velezensisB6具有显著提高原油采收和油井清防蜡的效果,应用潜力巨大。     

Isolation of Eikenella corrodens in a General Hospital

The carbon source markedly influenced the qualitative and quantitative composition of cellular hydrocarbons in Cladosporium resinae. Total lipid and hydrocarbon content was greater in cells grown on n-alkanes than in cells grown on glucose or glutamic acid. Glucose-grown cells contained a spectrum of aliphatic hydrocarbons from C(7) to C(36); pristane and n-hexadecane comprised 98% of the total. Cells grown on glutamic acid contained C(7) to C(23) hydrocarbons; n-tridecane, n-tetradecane, n-hexadecane, and pristane made up 74% of the total. n-Decane-grown cells yielded C(8) to C(32) compounds, and n-hexadecane (96%) was the major hydrocarbon. Cells grown on individual n-alkanes from C(11) to C(15) all contained C(11) to C(28) hydrocarbons, and cells grown on n-hexadecane contained C(11) to C(32) hydrocarbons. In n-undecane-grown cells, n-hexadecane and pristane made up 92% of the total, but in cells grown on C(12) to C(16)n-alkanes the major cellular hydrocarbon was the one on which the cells were grown. This suggests that cells cultured on n-alkanes of C(12) or longer accumulate n-alkanes prior to oxidizing them.     

Gordonia sp. LAM0048的分离鉴定及其降解正十六烷的研究

以正十六烷为唯一碳源,从长期受石油污染的土壤中筛选到一株高效降解正十六烷的菌株LAM0048。通过形态学观察、生理生化试验、细胞化学组分分析、16S rRNA基因序列分析、细胞脂肪酸和极性脂试验,确定其属于棒杆菌亚目(Corynebacterineae)、诺卡菌科(Nocardiaceae)、戈登氏属(Gordonia),且可能为戈登氏属的一株新种。采用单因素实验对菌株LAM0048在无机盐培养基中降解正十六烷的降解率进行初步探讨,发现该菌株能在以正十六烷为唯一碳源的培养基中生长,菌株LAM0048能够在36 h内完全降解0.05%(V/V)的正十六烷,当烷烃浓度达到1.0%(V/V)时,降解率达46.4%。结果表明LAM0048是一株具有耐受高浓度烷烃的石油降解菌,在石油污染环境的微生物修复中具有一定的应用潜力。     

Surfactant activity of a naphthalene degrading Bacillus pumilus strain isolated from oil sludge

We studied the growth, biosurfactant activities and petroleum hydrocarbon compounds utilisation of strain 28-11 isolated from a solid waste oil. The isolate was identified as Bacillus pumilus. It grew well in the presence of 0.1% (w/v) of crude oil and naphthalene under aerobic conditions and utilised these substances as carbon and energy source. The capacity of strain 28-11 to emulsify crude oil and its ability to remove hydrocarbons looks promising for its application in environmental technologies.