Theoretical investigation of ZnO and its doping clusters

Four clusters of ZnO, O–Zn–SR (–SR = ligand) and doping ZnO structures (with Cr, Cu, Al atoms) were investigated using density functional theory at theB3LYP/Lanl2dz level. The characteristics of Zn₃O₃ and Zn₄O₄ structures, which are the units of experimental wurtzite and zinc blende structures, were found to be similar to those of experimental ZnO nanocrystals. Moreover, the calculated Raman and IR spectra of ZnO clusters were almost consistent with experimental results. Raman spectra were observed to shift to higher frequencies with decreasing numbers of atoms. Both ligands and solvent make the wavelength of absorption peaks shift to blue. All transitions of absorption peaks for these pure clusters were from d to p orbitals. Finally, doping clusters and experimental doping nanocrystals were similar in character. The doping of metal changed the orbital of ZnO nanocrystals. The transitions in doping clusters (Cr–ZnO, Cu–ZnO) are from d to d orbitals, while Al–ZnO clusters have s–p transitions.     

Synthesis of highly luminescent mercaptosuccinic acid‐coated CdSe nanocrystals under atmospheric conditions

Here we report a facile one‐pot method for the preparation of high‐quality CdSe nanocrystals (NCs) in aqueous solution under an air atmosphere. Compared with the traditional use of NaHSe or H₂Se, the more stable sodium selenite is utilized as the Se source for preparing highly luminescent CdSe nanocrystals. By using mercaptosuccinic acid (MSA) as the capping agent and borate–citrate acid as the buffering solution, CdSe nanocrystals with high quantum yield (up to 70%) have been synthesized conveniently. The influence of different experimental parameters, such as the pH of the precursor solution, the molar ratio of Cd²⁺ to Na₂SeO₃ and Cd²⁺ to MSA on the CdSe nanocrystals, has been systematically investigated. The prepared CdSe NCs were spherical with a size of ~ 5 nm. Copyright © 2014 John Wiley & Sons, Ltd.     

Fabrication and Optical Properties of Water Soluble CdSeS Nanocrystals Using Glycerin as Stabilizing Agent

Herein we present an unusual phosphine-free method to fabricate water soluble CdSeS nanocrystals in cubic structure. In this method, glycerin was used as a stabilizing agent replacing tri-n-octylphosphine oxide (TOPO). Water solution of Na₂SeO₃ in polyethylene glycol was utilized as Se source. 3-Mercaptopropionic acid (MPA) provides S source. The phosphine-free Se and S sources were found to be highly reactive and suitable for the synthesis of CdSeS nanocrystals. XRD and HRTEM images confirm the formation of CdSeS nanocrystals in zinc blende structure. The absorption peaks on UV-vis spectra of as-prepared CdSeS nanocrystals are tunable from 330 nm to 440 nm, which blue shifts to shorter wavelength side in comparison with that of pure CdSe nanocrystals. The cubic CdSeS nanocrystals demonstrate narrow PL emissions spectra between 464 and 615 nm. Transmission electron microscopy images show the uniformity for the size distribution of the ternary QDs. Series water soluble CdSe_1–xS_x (x = 0∼1) nanocrystals have also been synthesized using Na₂SeO₃ and Na₂S solution as the Se-S co-sources. Tunable band gap energies of CdSe_1–xS_x (x = 0∼1) nanocrystals upon chemical composition x have been achieved, the gap ranges from 290 nm to 558 nm.     

Antagonistic effect of calcium, zinc and selenium against cadmium induced chromosomal aberrations and micronuclei in root cells of Hordeum vulgare

The antagonistic effect of calcium (Ca²⁺), zinc (Zn²⁺) and selenium (Se⁴⁺) at different concentrations (10⁻²–10⁻⁶ M) against cadmium (Cd²⁺) induced genotoxic effects in root cells of Hordeum vulgare were studied. The results showed that 10⁻³–10⁻⁵ M could induce chromosomal aberrations and micronuclei formation. But in the treatment with 10⁻²–10⁻⁶ M of Ca²⁺, Zn²⁺ and Se⁴⁺ together with Cd²⁺ (10⁻³–10⁻⁵ M), respectively, the frequencies of chromosomal aberrations and micronuclei effectively decreased after 48 h of treatment. The treatment with 10⁻⁴–10⁻⁶ M of Ca²⁺ together with 10⁻⁴–10⁻⁵ M Cd²⁺, 10⁻⁶ M of Zn²⁺ together with 10⁻⁵ M Cd²⁺ and 10⁻⁶ M of Se⁴⁺ together with 10⁻⁵ M Cd²⁺ suggested rather obvious antagonistic effects. The order of the antagonisms of Ca²⁺, Se⁴⁺ and Zn²⁺ against Cd²⁺ toxicity was Ca²⁺>Se⁴⁺>Zn²⁺. The degree of antagonisms of Ca²⁺, Se⁴⁺ and Zn²⁺ against Cd²⁺ related to their concentration ratio.     

Computational insights into structural and optical properties of P-containing and N-containing ligands capped CdSe clusters

ABSTRACT

The ligand effects on the structures and properties (energetics, binding energies, charge distribution and optical properties) of the (CdSe)_n clusters (n?=?3, 6, and 10) with P-containing (PH₃, PH₂Me, PHMe₂ and PMe₃) and N-containing (NH₃, NH₂Me, NHMe₂ and NMe₃) have been studied using density functional theory. The P atom and N atom in the ligands interact with Cd and form Cd–P and Cd–N bonds. The influence of P-containing ligands can be enhanced with increasing CH₃ of ligands, while the N-containing ligands influence slightly change. A blueshift in absorption band was predicted for the clusters with increasing CH₃ of P-containing ligands. We also found that the calculated binding energies for various ligands are found to decrease in the order PMe₃?>?NH₂Me?>?NHMe₂?>?NH₃?>?NMe₃?>?PHMe₂?>?PH₂Me?>?PH₃. The use of hydrogen atom for modelling of the CdSe cluster passivating ligands is found to yield unphysical results as well.     

Crystal structure of zinc citrate

The crystal structure of zinc citrate [Zn(II) (C₆H₅O₇)₂·4NH₄⁺] shows isolated zinc ions octahedrally coordinated to two equivalent citrates via a central hydroxyl, central carboxyl, and one terminal carboxyl from each citrate. The clusters are linked through hydrogen bonds to ammonium ions in the lattice. The structure is distinctly different from that of other divalent cation triply ionized citrate complexes, which are polymeric. Crystal data : space group P2₁/C, a = 8.784(3) Å, b = 13.499(4) Å, c = 9.083(3) Å, β = 113.4°(1), V = 988(1) ų. Citrate has been identified as the low molecular weight ligand that complexes zinc in human milk; this may be of interest in relation to intestinal zinc absorption.     

The Degradation of Dimethoate and the Mineral Immobilizing Function for Cd2+ by Pseudomonas putida

Organophosphorus pollution and heavy metal pollution are prominent in China and have caused increasingly severe environmental pollution. This research used Pseudomonas putida to degrade dimethoate so as to induce the formation of calcium carbonate (CaCO₃) and calcium phosphate (Ca₃(PO₄)₂) in beef extract peptone medium. In addition, the mineral immobilizing function of the generated Ca₃(PO₄)₂ and CaCO₃ for Cd²⁺ was studied by adding different concentrations of Cd²⁺ to the culture solution. Meanwhile, transmission electron microscopy (TEM), scanning electronic microscopy (SEM), X-ray diffraction, gas chromatography and atomic absorption spectrophotometry were used to investigate the biodegradation of dimethoate, the concentration variation of Ca²⁺ and Cd²⁺, the mineral and chemical compositions of the precipitates. The results showed that the growth of P. Putida could increase the pH value of the culture solution and effectively degrade the organophosphorus pesticide dimethoate. Besides, the concentration of Ca²⁺ in the culture solution decreased significantly in the first four days and then tended to be stable. Moreover, the TEM and SEM results presented that there were large amounts of biogenic sedimentary CaCO₃ and a little Ca₃(PO₄)₂ in the precipitates. Furthermore, in the employed culture system, the removal rates of Cd²⁺, when added at two different concentrations (6 ppm and 15 ppm), reached 100%. Therefore, this study provided a new idea for treating wastewater polluted with organophosphorus pesticide and heavy metals by using microorganisms.     

Synthesis of [Tl4Se16]: a novel tetranuclear Tl polyselenide

(Ph₄P)₄[Tl₄Se₁₆] was prepared hydrothermally in a sealed pyrex tube by the reaction of TlCl, K₂Se₄ and Ph₄PCl in a 1:1:1 molar ratio at 110 °C for one day. The red crystals were obtained in 50% yield. Crystals of (Ph₄P)₄[Tl₄Se₁₆]: triclinic P (No. 2), Z=1, a=12.054(9), b=19.450(10), c=11.799(6) Å, α=104.63(4), β=98.86(6), γ=101.99(6)° and V=2555(3) ų at 23 °C, 2θ_max=40.0°, μ=120.7 cm⁻¹, D_calc=2.23. The structure was solved by direct methods. Number of data collected: 5206. Number of unique data having F_o²>3σ(F_o²): 1723. Final R=0.075 and R_w=0.089. [Tl₄Se₁₆]⁴⁻ consists of four, almost already linearly arranged, tetrahedral thallium centers which are coordinated by two chelating Se₄²⁻, two bridging Se₂²⁻ and four bridging Se²⁻ ligands. [Tl₄Se₁₆]⁴⁻ sits on an inversion center and possesses a central {Tl₂Se₂}²⁺ planar core. The Tl(1)–Tl(1)′ distance in this core is 3.583(6) Å. These two thallium atoms are then each linked to two cyclic Tl(Se₄) fragments via bridging Se₂²⁻ and Se²⁻ ligands forming Tl₂Se(Se₂) five-membered rings.     

Comparison of the Structures of the Metal-thiolate Binding Site in Zn(II)-, Cd(II)-, and Hg(II)-Metallothioneins Using Molecular Modeling Techniques

Abstract

The first fully energy-minimized structures for a series of structurally related metal complexes of the important mammalian metal binding protein metallothionein are described. The structures were calculated based on structural information obtained from existing spectroscopic and crystallographic data, and minimized using molecular mechanics (MM2) techniques. A two domain structure, with stoichiometrics of M(II)₃?(S_cys)₉ and M(II)₄?(S_cys)₁₁ where M = zinc(II), cadmium(II), and mercury(II), was assembled and minimized. The resultant three-dimensional structure closely resembled that of rat liver Cd₅Zn₂?MT 1 obtained by analysis of x-ray diffraction data [A. H. Robbins, D. E. McRee, M. Williamson, S. A. Collett, N. H. Xuong, W. F. Furey, B. C. Wang and C. D. Stout, J. Mol. Biol. 221, 1269–1293 (1991)]. Minimized structures for Zn₇?MT, Cd₇?MT, and Hg₇?MT are reported. Deep crevices that expose the metal-thiolate clusters are seen in each structure. However, for the mercury-containing protein, much of the mercury-thiolate structure is visible and it is proposed that this provides access for extensive interaction between solvent water molecules and the mercury(II), resulting in the observed distortion away from tetrahedral geometry for Hg₇MT. Volume calculations are reported for the protein metallated with 7 Zn(II), Cd(II), or Hg(II). A series of structural changes calculated for the step-wise isomorphous replacement of Zn(II) by Cd(II) and Hg(II) in the Zn₄S₁₁ α domain are shown.     

Kesterite Thin‐Film Solar Cells: Advances in Materials Modelling of Cu2ZnSnS4

Quaternary semiconducting materials based on the kesterite (A₂BCX₄) mineral structure are the most promising candidates to overtake the current generation of light‐absorbing materials for thin‐film solar cells. Cu₂ZnSnS₄ (CZTS), Cu₂ZnSnSe₄ (CZTSe) and their alloy Cu₂ZnSn(Se,S)₄ consist of abundant, low‐cost and non‐toxic elements, unlike current CdTe and Cu(In,Ga)Se₂ based technologies. Zinc‐blende related structures are formed by quaternary compounds, but the complexity associated with the multi‐component system introduces difficulties in material growth, characterization, and application. First‐principles electronic structure simulations, performed over the past five years, that address the structural, electronic, and defect properties of this family of compounds are reviewed. Initial predictions of the bandgaps and crystal structures have recently been verified experimentally. The calculations highlight the role of atomic disorder on the cation sub‐lattice, as well as phase separation of Cu₂ZnSnS₄ into ZnS and CuSnS₃, on the material performance for light‐to‐electricity conversion in photovoltaic devices. Finally, the current grand challenges for materials modeling of thin‐film solar cells are highlighted.     

Modification of hERG1 channel gating by Cd2+

Each of the four subunits in a voltage-gated potassium channel has a voltage sensor domain (VSD) that is formed by four transmembrane helical segments (S1–S4). In response to changes in membrane potential, intramembrane displacement of basic residues in S4 produces a gating current. As S4 moves through the membrane, its basic residues also form sequential electrostatic interactions with acidic residues in immobile regions of the S2 and S3 segments. Transition metal cations interact with these same acidic residues and modify channel gating. In human ether-á-go-go–related gene type 1 (hERG1) channels, Cd²⁺ coordinated by D456 and D460 in S2 and D509 in S3 induces a positive shift in the voltage dependence of activation of ionic currents. Here, we characterize the effects of Cd²⁺ on hERG1 gating currents in Xenopus oocytes using the cut-open Vaseline gap technique. Cd²⁺ shifted the half-point (V_1/2) for the voltage dependence of the OFF gating charge–voltage (Q_OFF-V) relationship with an EC₅₀ of 171 µM; at 0.3 mM, V_1/2 was shifted by +50 mV. Cd²⁺ also induced an as of yet unrecognized small outward current (I_Cd-out) upon repolarization in a concentration- and voltage-dependent manner. We propose that Cd²⁺ and Arg residues in the S4 segment compete for interaction with acidic residues in S2 and S3 segments, and that the initial inward movement of S4 associated with membrane repolarization displaces Cd²⁺ in an outward direction to produce I_Cd-out. Co²⁺, Zn²⁺, and La³⁺ at concentrations that caused ∼+35-mV shifts in the Q_OFF-V relationship did not induce a current similar to I_Cd-out, suggesting that the binding site for these cations or their competition with basic residues in S4 differs from Cd²⁺. New Markov models of hERG1 channels were developed that describe gating currents as a noncooperative two-phase process of the VSD and can account for changes in these currents caused by extracellular Cd²⁺.     

Solution‐Processed TiO2 Nanoparticles as the Window Layer for CuIn(S,Se)2 Devices

As a wide‐bandgap semiconductor, titanium dioxide (TiO₂) with a porous structure has proven useful in dye‐sensitized solar cells, but its application in low‐cost, high‐efficiency inorganic photovoltaic devices based on materials such as Cu(InGa)Se₂ or Cu₂ZnSnS₄ is limited. Here, a thin film made from solution‐processed TiO₂ nanocrystals is demonstrated as an alternative to intrinsic zinc oxide (i‐ZnO) as the window layer of CuInS_xSe_1?x solar cells. The as‐synthesized, well‐dispersed, 6 nm TiO₂ nanocrystals are assembled into thin films with controllable thicknesses of 40, 80, and 160 nm. The TiO₂ nanocrystal films with thicknesses of 40 and 80 nm exhibit conversion efficiencies (6.2% and 6.33%, respectively) that are comparable to that of a layer of the typical sputtered i‐ZnO (6.42%). The conversion efficiency of the devices with a TiO₂ thickness of 160 nm decreases to 2.2%, owing to the large series resistance. A 9‐hour reaction time leads to aggregated nanoparticles with a much‐lower efficiency (2%) than that of the well‐dispersed TiO₂ nanoparticles prepared using a 15‐hour reaction time. Under optimized conditions, the champion TiO₂ nanocrystal‐film‐based device shows even higher efficiency (9.2%) than a control device employing a typical i‐ZnO film (8.6%).     

Solid phase speciation of Zn and Cd in zinc smelter effluent-irrigated soils

Solubility of metal in contaminated soils is a key factor which controls the phytoavailability and toxic effects of metals on soil environment. The chemical equilibria of metal ions between soil solution and solid phases govern the solubility of metals in soil. Hence, an attempt was made to identify the probable solid phases (minerals), which govern the solubility of Zn²⁺ and Cd²⁺ in zinc smelter effluent-irrigated soils. Estimation of free ion activities of Zn²⁺ (pZn²⁺) and Cd²⁺ (pCd²⁺) by Baker soil test indicated that metal ion activities were higher in smelter effluent-irrigated soils as compared to that in tubewell water-irrigated soils. Identification of solid phases further reveals that free ion activity of Zn²⁺ and Cd²⁺ in soil highly contaminated with Zn and Cd due to long-term irrigation with zinc smelter effluent is limited by the solubility of willemite (Zn₂SiO₄) in equilibrium with quartz and octavite (CdCO₃), respectively. However, in case of tubewell water-irrigated soil, franklinite (ZnFe₂O₄) in equilibrium with soil-Fe and exchangeable Cd are likely to govern the activity of Zn²⁺ and Cd²⁺ in soil solution, respectively. Formation of highly soluble minerals namely, willemite and octavite indicates the potential ecological risk of Zn and Cd, respectively in smelter effluent irrigated soil.     

Supramolecular assemblies of [Mo3Se4Clx(H2O)9−x] with cucurbituril; complementarity control through the variation of x

From solutions of seleno bridged triangular cluster Mo₃Se₄(aq)⁴⁺ in HCl, crystalline adducts with cucurbituril (Cuc, C₃₆H₃₆N₂₄O₁₂) of different composition, depending on HCl concentration, were isolated. From 2 M HCl, a monosubstituted cationic cluster crystallizes as {[Mo₃Se₄Cl(H₂O)₈]₂(C₃₆H₃₆N₂₄O₁₂)}Cl₆·16H₂O (1). Increase in HCl concentration to 6 M gives a pentasubstituted anionic species, (H₃O)₂[Mo₃Se₄Cl₅(H₂O)₄]₂(C₃₆H₃₆N₂₄O₁₂)·15H₂O (2). The crystal structures of 1 and 2 were determined by X-ray crystallography. Each portal of Cuc in 1 is covered with cluster cations [Mo₃Se₄Cl(H₂O)₈]³⁺ like a ‘lid’ on a ‘barrel’. Six water molecules in the trans position to the core μ₂-Se form complementary hydrogen bonds with oxygen atoms of Cuc (O?O, 2.713-3.067 Å). In 2 the complementarity is lost and the main structure building factor is short Se?Se interactions (Se?Se, 2.96-3.43 Å) between two adjacent anionic clusters. Stereochemistry of halide substitution in the triangular clusters M₃Q₄ is analyzed.     

Effects of trace metals on mouse B16 melanoma cells in culture

The effects of fourteen metal ions (As³⁺, As⁵⁺, Cd²⁺, Co²⁺, Cr³⁺, Cr⁶⁺, Hg²⁺, Li⁺, Mg²⁺, Mn²⁺, Ni²⁺, Se⁴⁺, V⁵⁺, VO²⁺) on the proliferation and differentiation in mouse B16 melanoma cells cultivated in vitro were analyzed. Cell number assays, melanin, and protein measurements, a 3(4,5-dimethylthiazol-2-yl)-2,5 diphenyltetrazolium bromide reduction test (MTT survival test), and a clonal growth assay were performed. At 10⁻⁴ M, metal ions such as As³⁺, As⁵⁺, Cd²⁺, Cr⁶⁺, Se⁴⁺, V⁵⁺, VO²⁺, and, to a minor extent, Li⁺, Hg²⁺, and Co²⁺ significantly reduced the number of the B16 melanoma cells. For the same molar concentration, the order of the levels of cell toxicity of the metal compounds to B16 cells as measured by the MTT test was as follows: Hg²⁺>Cr⁶⁺=Cd²⁺>As³⁺, As⁵⁺>V⁵⁺, VO²⁺>Se⁴⁺=Ni²⁺=Co²⁺=Li⁺. An increased synthesis of melanin in B16 cells was noted after incubation with Co²⁺, Ni²⁺, Cd²⁺, and Li⁺, whereas Se⁴⁺ had, on the contrary, an inhibiting effect on melanogenesis.     

Spectroscopic characterization of a fruit-specific metallothionein: M. acuminata MT3

Metallothioneins (MTs) are ubiquitous low molecular mass, cysteine-rich proteins with the ability to bind d¹⁰ metal ions in the form of metal-thiolate clusters. In contrast to the vertebrate forms, knowledge about the properties of members of the plant metallothionein family is still scarce. The amino acid sequences of plant MTs are distinctively different to the sequences of other MT species. The protein under investigation, Musa acuminata (banana) MT3, belongs to the plant MT fruit-specific p3 subfamily. With a total of 10 cysteine residues, MT3 features a cysteine content and percentage that is more comparable to fungal and prokaryotic MTs than to the well characterized mammalian iso-forms. The gene sequence encoding MT3 was cloned into a suitable vector and the protein was recombinantly overexpressed in Escherichia coli. MT3 is able to coordinate a maximum of four divalent d¹⁰ metal ions under the formation of metal-thiolate clusters. The hitherto unknown spectroscopic behavior of MT3 in combination with the metal ions Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁺ will be presented and gives rise to the existence of a weaker metal ion coordination site. The pH stability of the investigated zinc and cadmium clusters is comparable to the values found for other plant metallothioneins though significantly lower than for the mammalian iso-forms. Possible metal-thiolate cluster structures will additionally be discussed.     

Crystal structures of two- and three-dimensional polymeric complexes assembled by metal pseudohalides and 4-aminobenzoic acid via hydrogen bonds and covalent bonds

Four polymeric complexes [M(SCN)₂(4-abaH)₂]_n [M=Co(II) (1) or Cd(II) (2), 4-abaH=4-aminobenzoic acid], [Zn(N₃)(4-aba)]_n (3) and [Cd(N₃)(4-aba)(H₂O)]_n (4) were prepared from the reactions of 4-abaH with M(SCN)₂ [M=Co(II) or Cd(II)] and M(N₃)₂ [M=Zn(II) or Cd(II)] at different pH values. Their crystal structures have been determined by single-crystal X-ray diffraction. Both 1 and 2 consist of one-dimensional chains [M(μ-1,3-SCN)₂(4-abaH)₂]_n, in which each pair of the lateral carboxylic groups form double hydrogen bonds to furnish infinite two-dimensional sheets. In 3, the Zn(II) atoms are bridged by μ-1,1-azide groups and μ₂-carboxylate-O,O′ groups into an infinite zigzag chain featuring six-membered (ZnNZnOCO)_n rings, which are further connected by the 4-aba-N,O,O′ groups to generate a two-dimensional network. In 4, however, adjacent Cd(II) atoms are bridged by μ-1,1,3-azide groups to form an infinite chain with both four-membered Cd₂(μ-1,1-N₃)₂ and eight-membered Cd₂(μ-1,3-N₃)₂ rings. These chains are further connected by the 4-aba-N,O groups to generate a three-dimensional brickwall-like network. The results show significant effect of pH on the formation of the network structures.     

Over 104-fold amplified upconversion luminescence of lanthanide nanocrystals through optical oscillator-like system

Recently, lanthanide (Ln) luminescent nanocrystals have attracted increasing attention in various fields such as biomedical imaging, lasers, and anticounterfeiting. However, due to the forbidden 4f–4f transition of lanthanide ions, the absorption cross-section and luminescence brightness of lanthanide nanocrystals are limited. To address the challenge, we constructed an optical oscillator-like system to repeatedly simulate lanthanide nanocrystals to enhance the absorption efficiency of lanthanide ions on excitation photons. In this optical system, the upconversion luminescence (UCL) of Tm³⁺ emission of ~450 nm excited by a 980 nm laser can be amplified by a factor beyond 10⁴. The corresponding downshifting luminescence of Tm³⁺ at 1460 nm was enhanced by three orders of magnitude. We also demonstrated that the significant luminescence enhancement in the designed optical oscillator-like system was general for various lanthanide nanocrystals including NaYF₄:Yb³⁺/Ln³⁺, NaErF₄@NaYF₄ and NaYF₄:Yb³⁺/Ln³⁺@NaYF₄:Yb³⁺@NaYF₄ (Ln = Er, Tm, Ho) regardless of the wavelengths of excitation sources (808 and 980 nm). The mechanism study revealed that both elevated laser power in the optical system and multiple excitations on lanthanide nanocrystals were the main reason for the luminescence amplification. Our findings may benefit the future development of low-threshold upconversion and downshifting luminescence of lanthanide nanocrystals and expand their applications.     

Biosorption of heavy metal ions by brown seaweeds from southern coast of Korea

Heavy metal ions (Pb²⁺, Cd²⁺, Mn²⁺, Cu²⁺, and Cr₂O₇ ^2?) were biosorbed by brown seaweeds (Hizikia fusiformis, Laminaria japonica, and Undaria pinnatifida) collected from the southern coast of South Korea. The biosorption of heavy metal ions was pH-dependent showing a minimum absorption at pH 2 and a maximum biosorption at pH 4 (Pb²⁺, Cd²⁺, Mn²⁺, and Cr₂O₇ ^2?) or pH 6 (Cu²⁺). Biosorption increased most noticeably for pH changes from 2 to 3. In the latter pH range, biosorption increased, because a higher pH decreased the electrostatic repulsion between metal ions and functional groups on the seaweed. In the pH range of 2 ～ 4, biosorption of negatively-charged chromium species (Cr₂O₇ ^?2) followed the pattern of positively-charged metal ions (Pb²⁺, Cd²⁺, Mn²⁺, and Cu²⁺). This suggests that the most prevalent chromium species were positively-charged Cr³⁺, reduced from Cr⁶⁺ in Cr₂O₇ ^?2. Whereas positively-charged heavy metal ions (Pb²⁺, Cd²⁺, Mn²⁺, and Cu²⁺) reached a plateau after the maximum level, biosorption of chromium ions decreased noticeably between pH 5 and 8. Kinetic data showed that biosorption by brown seaweed occurred rapidly during the first 10 min, and most of the heavy metals were bound to the seaweed within 30 min. Equilibrium adsorption data for a lead ion could fit well in the Langmuir and Freundlich isotherm models with regression coefficients (R ²) between 0.93 and 0.98.     

Polynuclear and polymeric metal complexes based upon 1,2,4-triazolyl functionalized adamantanes

A series of coordination compounds [Cd₂(trad)₇Br₂][Cd(trad)Br₃]₂ (1), [Cd₃(trad)₆{N(CN)₂}₄(H₂O)₂](N(CN)₂)₂ (2), [{Cd₂(trad)₅}{Cd(N(CN)₂)₆}]·3CH₃OH (3), [{Cd₃(trad)₆(SeCN)₂}{Cd(SeCN)₄}₂] (4), [Cd₂(trad)₃(NCS)₄] (5), [Cd₃(tr₂ad)₃(μ-NCS)₃](NCS)₃ (6), [Cd₃(tr₂ad)₆](NO₃)₆·22H₂O (7), [Cu₃(tr₂ad)₄(SO₄)(H₂O)₃](SO₄)₂·34H₂O (8) and [Cu₂(OH)(tr₂ad)₂](NO₃)₃·4H₂O (9) (trad = 4-(adamantan-1-yl)-1,2,4-triazole; tr₂ad = 1,3-bis(1,2,4-triazol-4-yl)-adamantane) revealed the potential of 1,2,4-triazolyl functionalized adamantanes for design of metal-organic polymers incorporating polynuclear coordination units as multiconnected nodes. Structures 1-5 are based upon characteristic di- and trinuclear clusters involving triple triazole bridges [M(μ₂-trad)₃M] (M = Cd), while doubling of the ligand functionality (tr₂ad) allows integration of the clusters into 3D polymeric frameworks 6-9 (M = Cd, Cu).