Fragment size difference between multiplex and singleplex PCR products and their practical implications

By simultaneously amplifying several loci in the same reaction, multiplex PCR has been used in gene mapping and DNA typing with polymorphic short tandem repeat loci. Previous studies have discussed in detail the various parameters and conditions that influence the quantity of individual products generated by multiplex PCR. In practice, when a primer pair fails to amplify in a multiplex PCR for some individuals, singleplex PCR is often employed as a supplement to amplify the primer pair. However, the reliability of this procedure is unknown. In this study, we used six primer pairs from ABI PRISM Linkage Mapping Set version 2 to perform multiplex and singleplex reactions. The fluorescence-labeled amplification products were separated and detected on ABI PRISM 310 Genetic Analyzer. We found that for the marker D1S468, multiplex and singleplex reactions for the majority of individuals yielded reactions of different sizes. Therefore, the potential size difference between multiplex and singleplex reactions needs to be investigated. This investigation is essential to employ multiplex PCR supplemented with singleplex PCR in gene mapping and DNA typing.     

A rapid PCR-based method for the identification of ob mutant mice

With increasing incidence of obesity, there is greater demand for suitable research and therapeutic models. The ob/ob mouse model develops obesity by 5 weeks of age. Previously, a method using DNA purification, PCR, and restriction digestion of products was devised to identify mice bearing the ob allele. Here, we describe a direct PCR method that requires no DNA purification. Wild-type and ob-specific primers are used under the same conditions in two separate and simultaneously run three-primer PCRs. Standard PCR using the wild-type primer mix produces 191 bp and 104 bp bands in +/+ and ob/+ and only the control 191 bp band in ob/ob animals. The ob-specific primer reaction produces 191 bp and 123 bp bands in ob/+ and ob/ob and only the control 191 bp band in +/+ animals. Phenotypic weight gain in offspring of heterozygous intercrosses was used to validate genotypes. This primer-specific PCR method allows simultaneous identification of +/+, ob/+, and ob/ob genotypes prior to breeding age to facilitate breeding and research studies in an important model of clinical obesity.     

Evaluation of PCR primers for denaturing gradient gel electrophoresis analysis of fungal communities in compost

AIMS: Three previously published fungal specific PCR primer sets, referred to as the NS, EF and NL primer sets, were evaluated for use in compost microbial community analysis by PCR and denaturing gradient gel electrophoresis (DGGE). METHODS AND RESULTS: Primers were first evaluated based on their tolerance to PCR inhibitors. Due to its sensitivity to inhibitors, the NS primer set was determined to require a 10-fold smaller volume addition of compost DNA to PCR than the EF and NL primer sets, based on a logistic regression model for a 75% PCR success rate. Further evaluation of the EF and NL primer sets involved testing the resolution of PCR products from pure fungal cultures on DGGE. The NL primer set, which targets the more variable 28S rDNA, resulted in multiple bands for each pure culture. Thus, the EF primer set was used to monitor the microbial community during compost colonization studies, where three fungi were inoculated onto autoclaved grape pomace and rice straw compost. CONCLUSIONS: Of the three primer sets evaluated, the EF primer set was determined to be the best for PCR-DGGE of compost fungal populations; however, concerns with the EF primer set included the lack of sequence divergence in the targeted region of 18S rDNA and PCR artifacts which interfered with detection of inoculated fungi in the colonization studies. SIGNIFICANCE AND IMPACT OF THE STUDY: There are many factors related to PCR primers that need to be assessed prior to applying PCR-DGGE to fungal communities in complex environments such as compost.     

One-step isolation of plant DNA suitable for PCR amplification

We report a one-step extraction technique for the isolation of plant DNA, DNA suitable for amplification by PCR can be produced from leaf material smaller than 0.3 mm² in less than 20 min, with no tube changes. The method was tested on several plant specA00AK020ies. The described method was found to extract DNA that could be amplified without any further purification or treatment. The isolated DNA was amplified using a universal chloroplast primer set. The method was validated by comparing size of PCR products generated by the novel method to PCR products generated using standard DNA isolation techniques.     

Comparison of different labeling methods for the production of labeled target DNA for microarray hybridization

Different labeling methods were studied to compare various approaches to the preparation of labeled target DNA for microarray experiments. The methods under investigation included a post-PCR labeling method using the Klenow fragment and a DecaLabel DNA labeling kit, the use of a Cy3-labeled forward primer in the PCR, generating either double-stranded or single-stranded PCR products, and the incorporation of Cy3-labeled dCTPs in the PCR. A microarray that had already been designed and used for the detection of microorganisms in compost was used in the study. PCR products from the organisms Burkholderia cepacia and Staphylococcus aureus were used in the comparison study, and the signals from the probes for these organisms analyzed. The highest signals were obtained when using the post-PCR labeling method, although with this method, more non-specific hybridizations were found. Single-stranded PCR products that had been labeled by the incorporation of a Cy3-labeled forward primer in the PCR were found to give the next highest signals upon hybridization for a majority of the tested probes, with less non-specific hybridizations. Hybridization with double-stranded PCR product labeled with a Cy3-labeled forward primer, or labeled by the incorporation of Cy3-labeled dCTPs resulted in acceptable signal to noise ratios for all probes except the UNIV 1389a and Burkholderia genus probes, both located toward the 3' end of the 16S rRNA gene. The comparison of the different DNA labeling methods revealed that labeling via the Cy3-forward primer approach is the most appropriate of the studied methods for the preparation of labeled target DNA for our purposes.     

Development of primer sets designed for use with the PCR to amplify conserved genes from filamentous ascomycetes.

We constructed nine sets of oligonucleotide primers on the basis of the results of DNA hybridization of cloned genes from Neurospora crassa and Aspergillus nidulans to the genomes of select filamentous ascomycetes and deuteromycetes (with filamentous ascomycete affiliations). Nine sets of primers were designed to amplify segments of DNA that span one or more introns in conserved genes. PCR DNA amplification with the nine primer sets with genomic DNA from ascomycetes, deuteromycetes, basidiomycetes, and plants revealed that five of the primer sets amplified a product only from DNA of the filamentous ascomycetes and deuteromycetes. The five primer sets were constructed from the N. crassa genes for histone 3, histone 4, beta-tubulin, and the plasma membrane ATPase. With these five primer sets, polymorphisms were observed in both the size of and restriction enzyme sites in the amplified products from the filamentous ascomycetes. The primer sets described here may provide useful tools for phylogenetic studies and genome analyses in filamentous ascomycetes and deuteromycetes (with ascomycete affiliations), as well as for the rapid differentiation of fungal species by PCR.     

Efficient production of single-stranded DNA as long as 2 kb for sequencing of PCR-amplified DNA.

A modification of the asymmetric PCR method is described, which reliably facilitates sequencing of PCR-amplified DNA. This procedure produces single-stranded DNA fragments as long as two kilobases that are suitable for dideoxy DNA sequencing. First, a PCR for double-stranded DNA is preformed under optimal conditions (double-stranded PCR). Then, a 5-10-microliters fraction of the double-stranded PCR and a single primer are used to generate single-stranded DNA in a separate PCR (single-stranded PCR). The concentration of the single primer are used to generate single-stranded DNA in a separate PCR (single-stranded PCR). The concentration of the single primer is approximately 0.4 microM. Usually 15 to 25 cycles of single-stranded PCR are optimal to produce single-stranded DNA for four to eight sequencing reactions. The single-stranded DNA is purified by centrifugal ultrafiltration and used directly in dideoxy sequencing. This method was employed to produce high-quality single-stranded DNA templates from a variety of organisms for efficient DNA sequencing of PCR-amplified DNA.     

Use of an arbitrarily primed PCR product in the development of a Campylobacter jejuni-specific PCR.

Development of a PCR assay for Campylobacter jejuni is based on the isolation of species-specific DNA. An arbitrarily primed PCR incorporating 10-mer primers was used to generate fingerprints of C. jejuni M129 genomic DNA. Fingerprint products were then screened individually for their species specificity in dot blot hybridizations with 6 C. jejuni isolates, 4 Campylobacter species other than C. jejuni, and 27 enteric bacterial species other than Campylobacter spp. A 486-bp fingerprint product hybridized specifically to C. jejuni DNA under stringent conditions; no binding to Campylobacter DNA other than that of C. jejuni or to DNA from enteric bacteria was detected. The 486-bp fingerprint product was sequenced, and primers corresponding to three overlapping regions of the DNA probe were synthesized. Evaluation of the three primer pairs for specificity to C. jejuni DNA identified an oligonucleotide primer pair which amplified a 265-bp product from six C. jejuni isolates only. In sensitivity studies using a crude M129 lysate as the template, the C. jejuni-specific PCR amplified the 265-bp product in a lysate with as few as 100 bacteria.     

Differentiation of Trichinella genotypes by polymerase chain reaction using sequence-specific primers.

A method was developed to identify species and genotypes within the genus Trichinella using polymerase chain reaction (PCR) and specific primers. Enzymatic amplification of 2 partially conserved and repetitive genomic DNA sequences that have been shown to be variable in length within the different Trichinella genotypes form the basis of this test. Within these regions of the genome, 4 sets of primers were evaluated from which 2 were chosen for their ability to differentiate among the genotypes under stringent primer annealing conditions while maintaining high yields of amplification product. Differences in the size of PCR products from multiple isolates of each genotype indicate sufficient variation to identify 7 of the 8 parasite groups within this genus. One primer set can differentiate among some genotypes working from a single larva. Identification of Trichinella genotypes will assist in distinguishing between sylvatic and synanthropic life cycles. Such information will be critical in tracing sources of trichinellosis by easily and unambiguously identifying likely host reservoirs and will provide valuable information for instituting methods of control.     

Coordinated leading- and lagging-strand synthesis at the Escherichia coli DNA replication fork. II. Frequency of primer synthesis and efficiency of primer utilization control Okazaki fragment size.

To investigate the role of the priming apparatus at the replication fork in determining Okazaki fragment size, the products of primer synthesis generated in vitro during rolling-circle DNA replication catalyzed by the DNA polymerase III holoenzyme, the single-stranded DNA binding protein, and the primosome on a tailed form II DNA template were isolated and characterized. The abundance of oligoribonucleotide primers and the incidence of covalent DNA chain extension of the primer population was measured under different reaction conditions known to affect the size of the products of lagging-strand DNA synthesis. These analyses demonstrated that the factors affecting Okazaki fragment length could be distinguished by either their effect on the frequency of primer synthesis or by their influence on the efficiency of initiation of DNA synthesis from primer termini. Primase and the ribonucleoside triphosphates were found to stimulate primer synthesis. The observed trend toward smaller fragment size as the concentration of these effectors was raised was apparently a direct consequence of the increased frequency of primer synthesis. The beta subunit of the DNA polymerase III holoenzyme and the deoxyribonucleoside triphosphates did not alter the priming frequency; instead, the concentration of these factors influenced the ability of the lagging-strand DNA polymerase to efficiently utilize primers to initiate DNA synthesis. Maximum utilization of the available primers correlated with the lowest mean value of Okazaki fragment length. These data were used to draw general conclusions concerning the temporal order of enzymatic steps that operate during a cycle of Okazaki fragment synthesis on the lagging-strand DNA template.     

Computing by polymerase chain reaction

A mathematical notation is introduced to represent, at a symbolic level, different mechanisms of DNA recombination, and a 'PCR lemma' is proven by analytically describing the combinatorial properties of the polymerase chain reaction process. This approach led to the discovery of novel techniques, based on a form of PCR which we called cross pairing PCR (briefly XPCR). They were mathematically analyzed and already experimentally proven in different contexts, such as DNA extraction and recombination. Thus, a mathematical analysis of standard methodologies may highlight novel mechanisms of DNA recombination and this can provide new technologies for DNA manipulation.     

Use of tagged random hexamer amplification (TRHA) to clone and sequence minute quantities of DNA--application to a 180 kb plasmid isolated from Sphingomonas F199.

We have developed a novel method to clone and sequence minute quantities of DNA. The method was applied to sequence a 180 kb plasmid pNL1. The first step was the production of a size distributed population of DNA molecules that were derived from the 180 kb plasmid pNL1. The first step was accomplished by a random synthesis reaction using Klenow fragment and random hexamers tagged with a T7 primer at the primer 5'-end (T7-dN6, 5'-GTAATACGACTCACTATAGGGCNNNNNN-3'. In the second step, Klenow-synthesized molecules were amplified by PCR using T7 primer (5'-GTAATACGACTCACTATAGGGC-3'). With a hundred nanograms starting plasmid DNA from pNL1, we were able to generate Klenow-synthesized molecules with sizes ranging from 28 bp to >23 kb which were detectable on an agarose gel. The Klenow-synthesized molecules were then used as templates for standard PCR with T7 primer. PCR products of sizes ranging from 0.3 to 1.3 kb were obtained for cloning and sequencing. From the same Klenow-synthesized molecules, we were also able to generate PCR products with sizes up to 23 kb by long range PCR. A total 232.5 kb sequences were obtained from 593 plasmid clones and over twenty putative genes were identified. Sequences from these 593 clones were assembled into 62 contigs and 99 individual sequence fragments with a total unique sequence of 86.3 kb.     

Genome size and microsatellites: the effect of nuclear size on amplification potential.

Although the frequency of microsatellite DNA regions generally increases with increasing genome size, genome size has a negative effect on polymerase chain reaction (PCR) amplification. Thus, researchers developing sets of PCR primers, as is commonly done for microsatellite DNA regions, may encounter greater difficulty when working with species that have larger genomes. I investigated the effect of genome size on overall amplification success using data from nine different metazoan taxa. The proportion of primer sets that did not amplify PCR products was strongly and positively correlated with the haploid C value of the target species. Increasing genome size may affect amplification success negatively because of a decrease in target:nontarget DNA or by dilution of the available primer pool by nonspecific binding.     

Detection of differential gene copy number using denaturing high performance liquid chromatography

Genomic rearrangements leading to deletion or duplication of gene(s) resulting in alterations in gene copy number underlie the molecular lesion in several genetic disorders. Methods currently used to determine gene copy number including real time PCR, southern hybridization, fluorescence in situ hybridization, densitometric scanning of PCR product etc. have certain disadvantages and are also expensive and time consuming. Herein, we describe a simple and rapid method to assess gene copy number using denaturing high performance liquid chromatography (dHPLC). We used X chromosome genes as model to compare the gene copy numbers present on this chromosome in males and females. DNA from these samples were amplified by biplex PCR using primer pairs specific for X chromosome genes only (target gene) and for genes present on both X and Y chromosomes (internal control). Amplified products were analyzed using HPLC under non-denaturing conditions. The ratio of peak areas (target gene/internal control) of the amplified products was approximately twice in female samples than male samples (p < 0.001) demonstrating that the differential gene copy number can be easily detected using this method. This method can potentially be used for diagnostic purpose where the need is to distinguish samples based on the differential gene copy numbers.     

Mitochondrial D-loop "signatures" produced by low-stringency single specific primer PCR constitute a simple comparative human identity test.

We have developed a technique called "LSSP-PCR" (low-stringency single specific primer PCR) that detects single or multiple mutations in DNA. A purified DNA fragment is submitted to PCR by using a single primer specific for one of the extremities of the fragment, under conditions of very low stringency. The primer hybridizes specifically to its complementary extremity and nonspecifically to multiple sites within the fragment, in a sequence-dependent manner. A complex set of reaction products is thus created that, when separated by electrophoresis, constitutes a unique "gene signature." We here report the application of LSSP-PCR to the detection of sequence variation in the control (D-loop) region of human mtDNA, which is known to differ significantly between unrelated individuals. We prepared human DNA samples from blood and amplified a 1024-bp portion of the mtDNA control region, using primers L15996 and H408. The amplified mtDNA fragments were then reamplified under LSSP-PCR conditions by using L15996 or H408 as drivers to produce complex signatures that always differed between unrelated individuals and yet were highly reproducible. In contrast, all mother-child pairs tested were identical, as expected from the matrilineal inheritance of mtDNA. Thus, the use of LSSP-PCR to produce D-loop signatures constitutes a powerful new technique for mtDNA-based comparative identity testing.     

Uracil DNA glycosylase-mediated cloning of polymerase chain reaction-amplified DNA: application to genomic and cDNA cloning.

A simple and rapid method for cloning of amplification products directly from the polymerase chain reaction (PCR) has been developed. The method is based on the addition of a 12-base dUMP-containing sequence (CUACUACUACUA) to the 5' end of PCR primers. Incorporation of these primers during PCR results in the selective placement of dUMP residues into the 5' end of amplification products. Selective degradation of the dUMP residues in the PCR products with uracil DNA glycosylase (UDG) disrupts base pairing at the termini and generates 3' overhangs. Annealing of 3' protruding termini to vector DNA containing complementary 3' ends results in chimeric molecules which can be transformed, with high efficiency, without in vitro ligation. Directional cloning of PCR products has also been accomplished by incorporating different dU-containing sequences at the end of each PCR primer. Substitution of all dT residues in PCR primers with dU eliminates cloning of aberrant "primer dimer" products and enriches cloning of genuine PCR products. The method has been applied to cloning of inter-Alu DNA sequences from human placental DNA. Using a single primer, DNA sequences between appropriately oriented Alu sequences were amplified and cloned. Cloning of cDNA for the glyceraldehyde-3'-phosphate dehydrogenase gene from rat brain RNA was also demonstrated. The 3' end region of this gene was amplified by the 3' RACE method and the amplified DNA was cloned after UDG digestion. Characterization of cloned DNAs by sequence analysis showed accurate repair of the cloning junctions. The ligase-free cloning method with UDG should prove to be a widely applicable procedure for rapid cloning of PCR-amplified DNA.     

Modification of the GeneScan 2500™ fluorescent dye standard for accurate product sizing

This article describes a procedure for modification of the commercially prepared GeneScan 2500™ size standard for allelotyping with large DNA fragments such as variable number tandem repeats (VNTRs). Here a procedure was used to adapt commercially available size standards for the sizing of the interleukin-6 (IL6) 3′VNTR, which has allele sizes ranging from 600 to 900 base pairs. The procedure involves inclusion of products from the target PCR reaction as additional size standards for use with the size standard and is therefore applicable to the sizing of any product with any commercial size standard. Initially alleles were sized by fluorescent cycle sequencing to give a true estimate of their size (base pairs). Subsequently, the major alleles were labeled with a pig-tailed ROX-dye-labeled primer and inserted into the standard range. Finally alleles were resized following PCR with an un pig tailed HEX labeled primer and the modified standard. Once the size standard is modified, stocks can be stored indefinitely and replenished by re-PCR of selected alleles using the ROX-labeled primer. Modification of this approach can be applied to the sizing of any product where it is thought that commercially available size standards are performing suboptimally. Modification of size standards in this way does not affect performance in size regions other than those for which the extra products are included.     

Species identification of animal cells by nested PCR targeted to mitochondrial DNA

We developed a highly sensitive and convenient method of nested polymerase chain reaction (PCR) targeted to mitochondrial deoxyribonucleic acid (DNA) to identify animal species quickly in cultured cells. Fourteen vertebrate species, including human, cynomolgus monkey, African green monkey, mouse, rat, Syrian hamster, Chinese hamster, guinea pig, rabbit, dog, cat, cow, pig, and chicken, could be distinguished from each other by nested PCR. The first PCR amplifies mitochondrial DNA fragments with a universal primer pair complementary to the conserved regions of 14 species, and the second PCR amplifies the DNA fragments with species-specific primer pairs from the first products. The species-specific primer pairs were designed to easily distinguish 14 species from each other under standard agarose gel electrophoresis. We further developed the multiplex PCR using a mixture of seven species-specific primer pairs for two groups of animals. One was comprised of human, mouse, rat, cat, pig, cow, and rabbit, and the other was comprised of African green monkey, cynomolgus monkey, Syrian hamster, Chinese hamster, guinea pig, dog, and chicken. The sensitivity of the PCR assay was at least 100 pg DNA/reaction, which was sufficient for the detection of each species of DNA. Furthermore, the nested PCR method was able to identify the species in the interspecies mixture of DNA. Thus, the method developed in this study will provide a useful tool for the authentication of animal species.     

Microdissection of M chromosome in Vicia faba and its library construction]

Microdissection and microcloning technique was employed to construct the library of M chromosome in Vicia faba. The M chromosomes were microdissected with a micromanipulator and were put into a 0.5 ml Eppendorf tube, then digested with Sau3A. Sau3A linker adaptors were ligated to the end of chromosome DNA fragments, and two rounds of PCR were carried out with one chain of linker adaptor as the primer. The PCR products ranged in size from 300 base pair (bp) to 3000 bp with predominant fragments from 500 bp to 1500 bp. Southern hybridization analysis confirmed that PCR products originated from Vicia faba genome. The second round PCR products were cloned and about 102,000 recombinants were obtained. 118 recombinants were selected randomly for analysis. The inserts ranged in size from 150 bp to 3000 bp with an average of 690 bp. Dot blot was carried out for 100 clones with DIG labeled Vicia faba genome DNA as probes. The result revealed that 51% were low and unique copy sequences, 49% were repetitive sequences. M chromosome DNA library has not been reported before.