Dynamics of spicule production in the marine sponge <Emphasis Type="Italic">Hymeniacidon perlevis</Emphasis> during in vitro cell culture and seasonal development in the field

To characterize the formation of silica spicules, the dynamics of spiculogenesis of an intertidal marine sponge Hymeniacidon perlevis (Montagu 1818) (Porifera: Demospongiae) were investigated by measuring the gene expression of silicatein (the enzyme responsible for spicule silicification) and the dimensional changes of spicules during the developmental process of individual sponges and in cell cultures of primmorphs of archaeocyte-dominant cell populations. The different developmental stages of spicules were documented by time-lapse microscopy and observed by transmission electron microscopy during a 1-month culture period. During its annual life cycle, H. perlevis has four different developmental stages: dormancy, resuscitation, bloom, and decline. Field-grown individual sponge samples at different stages were collected over 7 months (March to September 2005). The dimensions of the silica spicules from these samples were microscopically measured and statistically analyzed. This analysis and the material properties of the spicules allowed them to be classified into four groups representing the different developmental stages of spiculogenesis. Silicatein expression in the bloom stage was more than 100 times higher than that in the other stages and was correlated with the spicule developmental stage. The trend of spicule formation in field-grown sponges was consistent with the trend in cell culture. A new parameter, the maturation degree (MD) of spicules (defined as the ratio of actual to theoretical silica deposition of mature spicules), was introduced to quantify spicule development. Silica spiculogenesis during H. perlevis development was delineated by comparing MD and silicatein expression.     

Primmorphs Cryopreservation: A New Method for Long-Time Storage of Sponge Cells

The possibility to cryopreserve cells allows for wide opportunities of flexible handling of cell cultures from different sponge species. Primmorphs model, a multicellular 3D aggregate formed by dissociated sponge cells, is considered one of the best approaches to establish sponge cell culture but, in spite of the available protocols for freezing sponge cells, there is no information regarding the ability of the latter to form primmorphs after thawing. In the present work, we demonstrate that, after a freezing and thawing cycle using dissociated Petrosia ficiformis cells as a model, cells viability was high but it was not possible to obtain primmorphs. The same protocol for cryopreservation was then used to directly freeze primmorphs. In this second case, after thawing, viability and the cellular proliferative level were similar to unfrozen standard primmorphs. Spiculogenesis in thawed primmorphs was evaluated by quantifying the silicatein gene expression level and by assaying the silica amount in the newly formed spicules, then compared with the correspondent values obtained in standard unfrozen primmorphs. Results indicate that the freezing cycle does not affect the spiculogenesis rate. Finally, the expression level of heat shock protein 70, a well-known stress marker, was assayed and the results showed no differences between frozen and unfrozen samples. These findings are likely to promote relevant improvements in sponge cell culture technique, allowing for a worldwide exchange of living biological material, paving the way for cell banking of Porifera.     

A synthetic biology approach for the fabrication of functional (fluorescent magnetic) bioorganic–inorganic hybrid materials in sponge primmorphs

During evolution, sponges (Porifera) have honed the genetic toolbox and biosynthetic mechanisms for the fabrication of siliceous skeletal components (spicules). Spicules carry a protein scaffold embedded within biogenic silica (biosilica) and feature an amazing range of optical, structural, and mechanical properties. Thus, it is tempting to explore the low-energy synthetic pathways of spiculogenesis for the fabrication of innovative hybrid materials. In this synthetic biology approach, the uptake of multifunctional nonbiogenic nanoparticles (fluorescent, superparamagnetic) by spicule-forming cells of bioreactor-cultivated sponge primmorphs provides access to spiculogenesis. The ingested nanoparticles were detected within intracellular vesicles resembling silicasomes (silica-rich cellular compartments) and as cytosolic clusters where they lent primmorphs fluorescent/magnetic properties. During spiculogenesis, the nanoparticles initially formed an incomplete layer around juvenile, intracellular spicules. In the mature, extracellular spicules the nanoparticles were densely arranged as a surface layer that rendered the resulting composite fluorescent and magnetic. By branching off the conventional route of solid-state materials synthesis under harsh conditions, a new pathway has been opened to a versatile platform that allows adding functionalities to growing spicules as templates in living cells, using nonbiogenic nanoscale building blocks with multiple functionalities. The magnet-assisted alignment renders this composite with its fluorescent/magnetic properties potentially suitable for application in biooptoelectronics and microelectronics (e.g., microscale on-chip waveguides for applications of optical detection and sensing).     

繁茂膜海绵原细胞富集细胞团培养过程中的细胞迁移规律

海绵是重要的生物活性物质来源, 近10年来, 从海绵中发现的具有生物活性的新化合物占海洋生物来源的30%以上, 并且大多具有显著的抗肿瘤, 抗艾滋病病毒的活性。但是, 由于海绵生物量不能满足这些活性物质进一步研究和商业化的需求, 目前仅有一种活性物质被成功的商业化, 这不仅是商业开发的损失, 也是提高人类生活质量活动的一种损失。为了解决海绵供给不足的问题, 人们进行了包括化学合成、海绵养殖以及海绵细胞培养在内的多种尝试,目前的研究结果表明, 海绵细胞离体培养技术是最有可能彻底解决海绵供给不足的途径之一。但是由于海绵自身的特殊性, 还没有人成功的建立起海绵细胞系以满足生产需要。人们发现, 海绵细胞的相互接触对于离体海绵细胞长期培养至关重要。经过多年的探索, 大连化物所海洋生物产品工程组建立了开发出了海绵原细胞富集细胞团培养技术, 通过对海绵组织内的原细胞进行富集来获得可长期培养的海绵细胞。海绵原细胞是海绵组织内的“干细胞”, 具有很强的分化、增殖潜力, 同时也是海绵组织内负责消化的主要细胞类型。为了探索海绵原细胞的增殖、分化规律, 本研究基于海绵原细胞富集细胞团培养体系, 构建了海绵细胞培养实时观测平台, 对繁茂膜海绵原细胞、领细胞、上皮细胞3类主要海绵细胞类型在海绵细胞团形成及生长的全过程进行观察, 了解不同类型细胞迁移规律的变化。通过对视频记录进行分析,发现离散的海绵细胞与细胞团内的海绵细胞具有截然相反的运动规律, 海绵细胞的运动具有很强的协同性。伴随原细胞在细胞团内不停息的迁移, 还观察到海绵细胞团内新生骨针的迁移以及细胞间进行颗粒物质的传递。这些信息的获得, 将有助于进一步了解不同细胞的功能与作用, 也有助于在此基础上探索海绵细胞的增殖、分化控制规律。     

Biosilica deposition in the marine sponge Petrosia ficiformis (Poiret, 1789): the model of primmorphs reveals time dependence of spiculogenesis

Biomineralization is a phenomenon that spreads across all taxonomic kingdoms and has numerous potential applications in biotechnology. Using cell cultures (primmorphs) of Porifera as a model to study biosilicification, we hypothesised that different culture media can modulate siliceous spicule production both quantitatively and qualitatively. Long-term primmorph cultures of Petrosia ficiformis allowed comparing four experimental conditions: (1) natural seawater (SW) medium containing 5 μM silicate as control; (2) SW-Si 120 μM; (3) SW-Fe 5 μM; (4) SW-Si 60 μM Fe 2.5 μM evidencing several patterns of spiculogenesis. Here we have provided the first demonstration of how spiculogenesis processes are time-dependent and how spicules increase in number and size over time. The addition of dissolved silicon and low iron concentrations to the culture media produces larger spicules in greater numbers, affecting the proportions among spicule types as well. In particular, silicate seems to facilitate the production of fusiform oxeas, while iron stimulates the production of strongyloxeas. Considering the key role of spicules in taxonomic studies, our results point out the importance of environmental conditions in skeletal phenotypic plasticity, modulating the norm of reaction of the species.     

Long-Term Cultivation of Primmorphs from Freshwater Baikal Sponges <Emphasis Type="Italic">Lubomirskia baikalensis</Emphasis>

The work was aimed at performing long-term cultivation of primmorphs in vitro from freshwater sponge Lubomirskia baikalensis (Pallas 1776), collected from Lake Baikal, obtaining its long-term primmorph culture in both natural (NBW) and artificial (ABW) Baikal water and at identifying the impact of different environmental factors on formation and growth of primmorphs. The first fine aggregates of L. baikalensis are formed in vitro 10–15 min after dissociation of sponge cells. Epithelization of aggregates begins 4 h later after the dissociation. Young primmorphs are formed 1 or 2 days later. The surface of primmorphs is covered with a layer of exopinacocytes. The primmorphs remain viable for more than 10 months at 3–6°C. Over 50% of primmorphs in NBW and 25% in ABW are attached to the substrate and grow like adult sponges. Thus, the long-term primmorph cultivation in vitro allows the creation of a controlled live model system under experimental conditions. The results of this work will allow the creation of a cell culture collection of Baikal freshwater sponges for studying morphogenesis of primmorphs during cultivation at different stages and transdifferentiation of their cells, physiological functions of sponge cells, processes of spiculogenesis, identification of proteins involved in biomineralization process, decoding of their genes, as well as a spectrum of secondary metabolites.     

Influence of rocky substrata on three-dimensional sponge cells model development

Many marine and freshwater organisms are rocky bottom dwellers, and the mineralogical composition of the substratum is known to potentially condition their biology and ecology. In this work, we propose the use of 3D sponge cellular aggregates, called primmorphs, as suitable models for a multidisciplinary study of the mechanisms which regulate the biological responses triggered by the contact with different inorganic substrata. In our experiments, primmorphs obtained from the marine sponge Petrosia ficiformis (Poiret, 1789) were reared on calcium carbonate or on quartzitic substrata, respectively, and their morphological development was described. In parallel, the quantitative expression levels of two genes, silicatein and heat shock protein 70 (HSP70), were evaluated. The first gene is strictly correlated to spiculogenesis and sponge growth, while the second is an important indicator of stress. The results achieved with this in vitro model clearly demonstrate that quartzitic substrata determine the increase of silicatein gene expression, a lower expression of HSP70 gene, and a remarkable difference in primmorphs morphology compared to the analogous samples grown on marble.     

Silicatein-mediated incorporation of titanium into spicules from the demosponge Suberites domuncula

Primmorphs (a three-dimensional sponge primary cell culture system) have been revealed to be a cell/tissue nano-factory for the production of tailor-made hybrid nanostructures. Growth of primmorphs is stimulated by the presence of a titanium alkoxide precursor tolerating titania (TiO₂) concentrations up to 250 μM. The presence and activity of silicatein in primmorphs has been analyzed by gel electrophoresis and Western blotting. Results of studies by scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy have revealed silica and titania to be co-localized on nanosized spicules. Our findings suggest that the incorporation of titania into the nanosized spicule is enzymatically mediated via active silicatein in an orchestrated mechanism.     

Molecular Cloning of Silicatein Gene from Marine Sponge <Emphasis Type="Italic">Petrosia ficiformis</Emphasis> (Porifera,Demospongiae) and Development of Primmorphs as a Model for Biosilicification Studies

In some sponges peculiar proteins called silicateins catalyze silica polymerization in ordered structures, and their study is of high interest for possible biotechnological applications in the nanostructure industry. In this work we describe the isolation and the molecular characterization of silicatein from spicules of Petrosia ficiformis, a common Mediterranean sponge, and the development of a cellular model (primmorphs) suitable for in vitro studies of silicatein gene regulation. The spicule of P. ficiformis contains an axial filament composed of 2 insoluble proteins, of 30 and 23 kDa. The 23-kDa protein was characterized, and the full-length cDNA was cloned. The putative amino acid sequence has high homology with previously described silicateins from other sponge species and also is very similar to cathepsins, a cystein protease family. Finally, P. ficiformis primmorphs express the silicatein gene, suggesting that they should be a good model for biosilicification studies.     

Primmorphs from archaeocytes-dominant cell population of the sponge hymeniacidon perleve: improved cell proliferation and spiculogenesis

Marine sponges (Porifera) possess an extraordinary diversity of bioactive metabolites for new drug discovery and development. In vitro cultivation of sponge cells in a bioreactor system is very attractive for the sustainable production of sponge-derived bioactive metabolites; however, it is still a challenging task. The recent establishment of sponge primmorphs, multicellular aggregates from dissociated mixed-cell population (MCP), has been widely acknowledged to hold great promise for cultivation in vitro. Here we present a new method to establish an in vitro sponge primmorph culture from archaeocyte-dominant cell population (ADCP) enriched by a Ficoll gradient, rather than a mixed-cell population (MCP). Our rationale is based upon the totipotency (the ability of a cell to differentiate into other cell types) of archaeocyte cells and the different biological functions of various sponge cell types. A sponge, Hymeniacidon perleve collected from the China Yellow Sea was used as a model system for this investigation. Distinct dynamics of primmorph formation were observed while significant increases in DNA synthesis, cell proliferation (up to threefold), and cell growth (up to fourfold) were achieved. Furthermore, a time-dependent spiculogenesis was clearly demonstrated in our longterm culture, indicating high metabolic activity of primmorphs from the ADCP. This new method represents an important step forward to advance sponge cell culture in vitro that may lead to commercial exploitation of sponge-derived drugs.     

Effects of germanium on the morphology of silica deposition in a freshwater sponge

The effect of germanium on the secretion of siliceous spicules by the freshwater sponge Spongilla lacustris was investigated by exposing germinating and hatching gemmules to varying concentrations of germanium (Ge) in the presence of silicon (Si). Results were analyzed quantitatively and qualitatively and demonstrate that a [Ge]/[Si] (= molar ratio) of 1.0 completely inhibits silicon deposition. Intermediate ratios (0.5, 0.1, 0.01) which are permissive to spicule appearance result in fewer, shorter, and thinner spicules, in proportionately fewer microscleres, and in short bulbous megascleres. The size of the bulb increases with increasing [Ge]/[Si], while the length of the bulbous megascleres decreases with increasing [Ge]/[Si]. Microscleres do not demonstrate these graded responses suggesting that they are secreted in an all or none manner. Swellings produced in pond water and bulbs produced in germanium appear to decrease in size with time indicating a spreading of the accumulated silica. The effect of germanium on spicule secretion can be partially explained by its ability to uncouple the growth in length of the axial filament from the growth of the surrounding silicalemma. Under these conditions excess silicalemma is produced in which silica accumulates as bulbs in short spicules. Continuous exposure to Ge is necessary to produce this altered morphology. It is conjectured that the bulbs may be retained due to an inhibition of spreading. which in turn may be caused by the incorporation of germanium into the silica.     

Intra-epithelial spicules in a homosclerophorid sponge

Attempts to understand the intricacies of biosilicification in sponges are hampered by difficulties in isolating and culturing their sclerocytes, which are specialized cells that wander at low density within the sponge body, and which are considered as being solely responsible for the secretion of siliceous skeletal structures (spicules). By investigating the homosclerophorid Corticium candelabrum, traditionally included in the class Demospongiae, we show that two abundant cell types of the epithelia (pinacocytes), in addition to sclerocytes, contain spicules intracellularly. The small size of these intracellular spicules, together with the ultrastructure of their silica layers, indicates that their silicification is unfinished and supports the idea that they are produced "in situ" by the epithelial cells rather than being incorporated from the intercellular mesohyl. The origin of small spicules that also occur (though rarely) within the nucleus of sclerocytes and the cytoplasm of choanocytes is more uncertain. Not only the location, but also the structure of spicules are unconventional in this sponge. Cross-sectioned spicules show a subcircular axial filament externally enveloped by a silica layer, followed by two concentric extra-axial organic layers, each being in turn surrounded by a silica ring. We interpret this structural pattern as the result of a distinctive three-step process, consisting of an initial (axial) silicification wave around the axial filament and two subsequent (extra-axial) silicification waves. These findings indicate that the cellular mechanisms of spicule production vary across sponges and reveal the need for a careful re-examination of the hitherto monophyletic state attributed to biosilicification within the phylum Porifera.     

Long-term culture of sponge explants: conditions enhancing survival and growth,and assessment of bioactivity

Sponges are an important source of secondary metabolites with pharmaceutical interest. This is the main reason for the increasing interest of sponge culture recent years. The optimal culture system depends on the species to be cultured: while some species easily produce sponge aggregates after dissociation (primmorphs), others show a great capacity to regenerate after fragmentation (explants). Corticium candelabrum is a Mediterranean bacteriosponge that can undergo asexual reproduction. We have taken advantage of this capability and cultured C. candelabrum explants under several experimental conditions. To find the best conditions for obtaining functional explants, we assayed a range of conditions, including seasons of collection, culture temperature, filtered versus filtered-sterile seawater, addition of antibiotics and proportion of ectosome. We monitored the changes in shape and ultrastructure during the formation of explants. After 24 h, TEM images showed the aquiferous system disarranged, in particular at the sponge periphery. From 2 to 4 weeks later, the aquiferous system regenerated, and fragments became functional sponges (explants). Explants were cultured under two regimes: in vitro and in a closed aquarium system. Antibiotics were only added to the in vitro culture to assess their effect on the symbiotic bacteria, which remained healthy despite the presence of antibiotics. Two food regimens (marine bacteria and green algae) were assayed for their ability to satisfy the metabolic requirements of explants. We monitored explant survival and growth. Explants showed a high long-term survival rate (close to 100%). Growth rates were higher in the closed aquarium system, without antibiotic addition, and fed with algae. Explants cultures were hardly contaminated because manipulation was reduced to a minimum and we used sterilized seawater. C. candelabrum produces bioactive molecules, which may play a defensive role in the sponge and may have pharmaceutical interest. The bioactivity of the explants was similar to that of wild sponges.     

Iron induces proliferation and morphogenesis in primmorphs from the marine sponge Suberites domuncula

Dissociated cells from marine demosponges retain their proliferation capacity if they are allowed to form special aggregates, the primmorphs. On the basis of incorporation studies and septin gene expression, we show that Fe3+ ions are required for the proliferation of cells in primmorphs from Suberites domuncula. In parallel, Fe3+ induced the expression of ferritin and strongly stimulated the synthesis of spicules. This result is supported by the finding that the enzymatic activity of silicatein, converting organosilicon to silicic acid, depends on Fe3+. Moreover, the expression of a scavenger receptor molecule, possibly involved in the morphology of spicules, depends on the presence of Fe3+. We conclude that iron is an essential factor in proliferative and morphogenetic processes in primmorphs.     

Sponge spicules as blueprints for the biofabrication of inorganic–organic composites and biomaterials

While most forms of multicellular life have developed a calcium-based skeleton, a few specialized organisms complement their body plan with silica. However, of all recent animals, only sponges (phylum Porifera) are able to polymerize silica enzymatically mediated in order to generate massive siliceous skeletal elements (spicules) during a unique reaction, at ambient temperature and pressure. During this biomineralization process (i.e., biosilicification) hydrated, amorphous silica is deposited within highly specialized sponge cells, ultimately resulting in structures that range in size from micrometers to meters. Spicules lend structural stability to the sponge body, deter predators, and transmit light similar to optic fibers. This peculiar phenomenon has been comprehensively studied in recent years and in several approaches, the molecular background was explored to create tools that might be employed for novel bioinspired biotechnological and biomedical applications. Thus, it was discovered that spiculogenesis is mediated by the enzyme silicatein and starts intracellularly. The resulting silica nanoparticles fuse and subsequently form concentric lamellar layers around a central protein filament, consisting of silicatein and the scaffold protein silintaphin-1. Once the growing spicule is extruded into the extracellular space, it obtains final size and shape. Again, this process is mediated by silicatein and silintaphin-1, in combination with other molecules such as galectin and collagen. The molecular toolbox generated so far allows the fabrication of novel micro- and nanostructured composites, contributing to the economical and sustainable synthesis of biomaterials with unique characteristics. In this context, first bioinspired approaches implement recombinant silicatein and silintaphin-1 for applications in the field of biomedicine (biosilica-mediated regeneration of tooth and bone defects) or micro-optics (in vitro synthesis of light waveguides) with promising results.     

Seasonal production of primmorphs from the marine sponge Petrosia ficiformis (Poiret, 1789) and new culturing approaches

The need to produce bioactive compounds from marine sponges leads several groups of research to the culture of primmorphs from different species, which are generally maintained in aquaria for long time before processing. Here we present a study where the importance of several parameters on primmorphs production from the symbiotic sponge Petrosia ficiformis has been evaluated: (i) the sterility of sea water, (ii) the maintenance in aquarium before processing, (iii) the seasonal cycle. Sterility of sea water does not improve primmorphs production in this species. The maintenance of sponges in aquaria before processing negatively affects cell cultures. Regarding seasonality, it is evident that both the number and the size of primmorphs can deeply change depending on the period of the year the sponge is collected. April and July are the months that lead to the highest number of primmorphs, May and June are the months that lead to their biggest sizes. Possible relationships of these results with the life cycle of P. ficiformis are discussed.     

Apposition of silica lamellae during growth of spicules in the demosponge Suberites domuncula: biological/biochemical studies and chemical/biomimetical confirmation

Recently it has been discovered that the formation of the siliceous spicules of Demospongiae proceeds enzymatically (via silicatein) and occurs matrix guided (on galectin strings). In addition, it could be demonstrated that silicatein, if immobilized onto inorganic surfaces, provides the template for the synthesis of biosilica. In order to understand the formation of spicules in the intact organism, detailed studies with primmorphs from Suberites domuncula have been performed. The demosponge spicules are formed from several silica lamellae which are concentrically arranged around the axial canal, harboring the axial filament composed of silicatein. Now we show that the appositional growth of the spicules in radial and longitudinal direction proceeds in the extracellular space along hollow cylinders; their surfaces are formed by silicatein. The extracellularly located spicules are surrounded by sclerocytes which are filled with both electron-dense and electron-poor vesicles; energy dispersive X-ray analysis/scanning electron microscopical studies revealed that the electron-dense vesicles are filled of silicon/silica and therefore termed silicasomes. The release of the content of the silicasomes into the hollow cylinder suggests that the newly formed silica lamella originate there; in addition the data are compatible with the view that the silicatein molecules, attached at the centripetal and centrifugal surfaces, mediate biosilica formation. In a chemical/biomimetical approach silicatein is linked onto the organic material-free spicules after their functionalization with aminopropyltriethoxysilane [amino groups]-poly(acetoxime methacrylate) [reactive ester polymer]-N(epsilon)-benzyloxycarbonyl L-lysine tert-butyl ester-Ni(II); finally His-tagged silicatein is immobilized. The matrix-bound enzyme synthesized a new biosilica lamella. These bioinspired findings are considered as the basis for a technical use/application/utilization of hollow cylinders formed by matrix-guided silicatein molecules for the biocatalytic synthesis of nanostructured tubes.