An automated device for the preparation of complex reagent mixtures. The immunofluorescence tomograph

A microcomputer-controlled device was built that automatically prepares small volumes of mixtures of up to eight reagents. The operation of the system is fast, flexible, and reliable, thus making possible the routine use of experimental protocols that require large numbers of small volume reagent samples, each having a different composition. In particular, the software we developed for this device handles the preparation of three-antibody staining solutions to be used in triple labeling immunofluorescent flow cytometry experiments that involve only two fluorochromes. In this role, the device is known as an "Immunofluorescence Tomograph."     

Dose Measurements in a 20-J Repetitive Plasma Focus

In this article, the results of X-ray dose measurements executed using thermoluminescent dosimeters in experiments with a very small (20 J) repetitive plasma focus device named SORENA-1 are presented and analyzed. The working gas in these experiments was Argon. Also, pinch formation in experiments with this device has been observed. This device has been designed and constructed in Plasma and Nuclear Fusion Research School of Nuclear Science and Technology Research Institute of Iran. From these results, it is concluded that we can do experiments with this device using Ar as working gas all over the working days of year, and a good symmetry for measured dose around the device has been seen.     

Experimental study of the performance of a very small repetitive plasma focus device in different working conditions

SORENA-1 is a very small repetitive Mather-type plasma focus device (20 J) that can operate at frequencies up to 1 Hz. This device has been designed and constructed in the Plasma and Nuclear Fusion Research School of the Nuclear Science and Technology Research Institute of Iran. In this article, the structure of SORENA-1 is described and results of experiments with Ar, Ne, and D₂ working gases at several discharge voltages and initial pressures are presented and analyzed.     

Implantable device for intravenous drug delivery in the rat.

The experimental design of studies using small laboratory animals may require repeated venous access for the application of drugs or diagnostics. An appropriate device should provide quick intravenous access without causing severe handling stress to the animals or the necessity of anaesthesia. In addition, the system should be suitable for repeated injections over several weeks. A silicone catheter is connected to an intravenous indwelling cannula with fixation wings. A closure stopper with injection port completes this system. The device is fixed subcutaneously on the back of the animal and the catheter is inserted into the jugular vein. The device is easily and quickly assembled and is more economic than commercial systems. It is easily implanted and allows repeated intravenous injections for several weeks without anaesthesia or restraint of the animals. The method allows repeated intravenous drug delivery over a couple of weeks in small animals.     

A new airway device for small laboratory animals

There is a need for a device for improved management of the airway of small laboratory animals during general anaesthesia. This report introduces such a device, referred to here as the airway device (AD). The AD has some similarity to the laryngeal mask airway (LMA) developed for human patients, but the mask portion of the device is specifically designed for small laboratory animals. In addition, the device has an oesophageal extension and unlike the LMA does not have a cuff associated with the mask. This report also shares experience of tests of one prototype AD with six New Zealand white rabbits. The AD was used for administering isoflurane and its effectiveness was evaluated during conditions of spontaneous and controlled intermittent positive pressure ventilation. The results provide encouragement for further development of the AD for airway management of small laboratory animals.     

Validation of a Novel Collection Device for Non-Invasive Urine Sampling from Free-Ranging Animals

Recent advances in non-invasively collected samples have opened up new and exciting opportunities for wildlife research. Different types of samples, however, involve different limitations and certain physiological markers (e.g., C-peptide, oxytocin) can only be reliably measured from urine. Common collection methods for urine to date work best for arboreal animals and large volumes of urine. Sufficient recovery of urine is thus still difficult for wildlife biologists, particularly for terrestrial and small bodied animals. We tested three collection devices (two commercially available saliva swabs, Salivette synthetic and cotton, and cotton First aid swabs) against a control to permit the collection of small volumes of urine from the ground. We collected urine samples from captive and wild macaques, and humans, measured volume recovery, and analyzed concentrates of selected physiological markers (creatinine, C-peptide, and neopterin). The Salivette synthetic device was superior to the two alternative devices. Concentrations of creatinine, absolute C-peptide, C-peptide per creatinine, absolute neopterin, and neopterin per creatinine measured in samples collected with this device did not differ significantly from the control and were also strongly correlated to it. Fluid recovery was also best for this device. The least suitable device is the First aid collection device; we found that while absolute C-peptide and C-peptide per creatinine concentrations did not differ significantly from the control, creatinine concentrations were significantly lower than the control. In addition, these concentrations were either not or weakly correlated to the control. The Salivette cotton device provided intermediate results, although these concentrations were strongly correlated to the control. Salivette synthetic swabs seem to be useful devices for the collection of small amounts of urine from the ground destined for the assessment of physiological parameters. They thus provide new opportunities for field studies to incorporate physiological markers, particularly on smaller bodied and terrestrial animals and where urine collection is difficult.     

对吸附式电极记录装置的技术改进

本文介绍一种用吸附式电极记录合体细胞组织生物电位的改进装置。它的特点是在建造负压的注射器和吸附式电极之间设置一分离的小室。这一小室既保障了放大器与实验标本之间的电路连系,又可直接放置在实验标本附近,负压由改进的注射器经过充有空气的塑料管抽吸,注射器可以放在任何方便的位置上。该方法在记录小动物,如蜗牛、青蛙、等的心脏、消化道等组织器官的生物电位时都能获得比较理想的效果,对研究小动物合体细胞组织的正常机能及药物作用等都具有较好的适用价值,并具有定位准确、操作方便的优点。     

A simple mechanical device for recording the diel activity pattern of small burrowing mammals in their natural habitats

A mechanical device for monitoring the diel activity pattern of small burrowing mammals under natural conditions is described. The device has been used to estimate the time spent by the Indian gerbil, Tatera indica indica Hardwicke in foraging above ground and in an underground nest which is a part of the device. Activity patterns recorded with this device have confirmed observations that Tatera i, indica is nocturnal. The average time spent by this rodent outside the nest during an eight day study period was 318 min/24h. These rodents are generally active between 1900–0300 hrs, apparently with two peaks of activity, one between 2100–2200 hrs and the other between 0100–0200 hrs.     

Mechanically Recoverable and Highly Efficient Perovskite Solar Cells: Investigation of Intrinsic Flexibility of Organic–Inorganic Perovskite

Highly efficient solar cells with sustainable performance under severe mechanical deformations are in great demand for future wearable power supply devices. In this regard, numerous studies have progressed to implement flexible architecture to high‐performance devices such as perovskite solar cells. However, the absence of suitable flexible and stretchable materials has been a great obstacle in the replacement of largely utilized transparent conducting oxides that are limited in flexibility. Here, a shape recoverable polymer, Noland Optical Adhesive 63, is utilized as a substrate of perovskite solar cell to enable complete shape recovery of the device upon sub‐millimeter bending radii. The employment of stretchable electrodes prevents mechanical damage of the perovskite layer. Before and after bending at a radius of 1 mm, power conversion efficiency (PCE) is measured to be 10.75% and 10.4%, respectively. Additionally, the shape recoverable device demonstrates a PCE of 6.07% after crumpling. The mechanical properties of all the layers are characterized by nanoindentation. Finite element analysis reveals that the outstanding flexibility of the perovskite layer enables small plastic strain distribution on the deformed device. These results clearly demonstrated that this device has great potential to be utilized in stretchable power supply applications.     

Suspended-drop electroporation for high-throughput delivery of biomolecules into cells

We present a high-throughput method that enables efficient delivery of biomolecules into cells. The device consists of an array of 96 suspended electrode pairs, where small sample volumes are top-loaded, electroporated and bottom-ejected into 96-well plates. We demonstrate the use of this suspended-drop electroporation (SDE) device to effectively introduce fluorescent dextran, small interfering RNA (siRNA) or cDNA into primary neurons, differentiated neutrophils and other cell types with conventionally low transfection rates.     

Controlled addition of small amounts of oxygen with membranes

Summary In some fermentations micro-aerobic conditions are desirable. The controlled addition of trace amounts of oxygen may be achieved by bubble free oxygen supply using silicon membrane tube, operated in dead-end mode. The small oxygen uptake rate is accurately determined with this self-constructable device.     

Online monitoring applying the anaerobic respiratory monitoring system reveals iron(II) limitation in YTF medium for Clostridium ljungdahlii

Online monitoring of microbial cultures is an effective approach for studying both aerobic and anaerobic microorganisms. Especially in small‐scale cultivations, several parallel online monitored experiments can generate a detailed understanding of the cultivation, compared to a situation where a few data points are generated from time course sampling and offline analysis. However, the availability of small‐scale online monitoring devices for acetogenic organisms is limited. In this study, the previously reported anaerobic Respiration Activity MOnitoring System (anaRAMOS) device was adapted for online monitoring of Clostridium ljungdahlii (C. ljungdahlii) cultures with fructose as the carbon source. The anaRAMOS was applied to identify conversion of different carbon sources present in commonly used YTF medium. An iron(II) deficiency was discovered in this medium for C. ljungdahlii. Addition of iron(II) to the YTF medium reduced the cultivation time and increased biomass yield of C. ljungdahlii cultures by 50% and 40%, respectively. The measurement of the carbon dioxide transfer rate was used to calculated the iron(II) contained in complex components. By demonstrating the application of the anaRAMOS device for medium optimization, it is proven that the described online monitoring device has potential for use in process development.     

A versatile microfiltration device

A versatile vacuum microfiltration device was designed for separation of small volumes of liquid from samples of cells or subcellular organelles through membrane filters. It is especially useful for separation of small samples from radioactive tracer when low blank values are mandatory for the performance of the measurement. In the present communication the microfiltration device was used for the separation of organelles from incubation medium labeled with 45Ca2+ for measurement of uptake of 45Ca2+ by small samples of liver or pancreatic islet mitochondria or of pancreatic islet secretory granules. Measurement of 45Ca2+ uptake was possible in samples containing less than 1 microgram of protein even if the sample was incubated with only 10,000 cpm of 45CaCl2. Blank values ranged only between 2.6 and 4.7% of the test values. The device should be useful for a variety of applications in many research areas where sample volumes are small.     

Self-powered electroporation using a singularity-induced nano-electroporation configuration

This study demonstrates the feasibility of creating a self-powered (galvanic) electroporation device using the singularity-induced nano-electroporation configuration. Using this configuration, the electric field in a galvanic electrochemical cell can be amplified and used for electroporation. A secondary current distribution model of a self-powered electroporation device shows that the device can create both reversible and irreversible electroporation-inducing electric field magnitudes, and generate a small amount of power.     

Drain-cover injuries in children.

This report highlights unnecessary injuries to the hands, forearms, and feet of small children, caused by falling drain-cover gratings, colloquially known as "shores". It is suggested that a simple locking device, similar to that employed on manhole covers, would eliminate this type of injury.     

Leukocyte counting from a small amount of whole blood using a size-controlled microcavity array

Absolute counting of total leukocytes or specific subsets within small amounts of whole blood is difficult due to a lack of techniques that enable separation of all leukocytes from limited amounts of whole blood. In this study, a microfluidic device equipped with a size-controlled microcavity array for highly efficient separation of leukocytes from submicroliters of whole blood was developed. The microcavity array can separate leukocytes from whole blood based on differences in the size and deformability between leukocytes and other blood cells. Leukocytes recovered on aligned microcavities were continuously processed for image-based immunophenotypic analysis. Our device successfully recovered over 90% of leukocytes in 1 μL of whole blood without pretreatment such as density gradient centrifugation or erythrocyte lysis. In addition, the proposed system successfully performed absolute enumeration of human CD4(+) and CD8(+) leukocytes from 1 μL of whole blood, and the obtained data showed good correlation with conventional flow cytometric analysis. Our microfluidic device has great potential as a tool for a point-of-care leukocyte analysis system.     

Ultrasonic motion analysis system--measurement of temporal and spatial gait parameters

The duration of stance and swing phase and step and stride length are important parameters in human gait. In this technical note a low-cost ultrasonic motion analysis system is described that is capable of measuring these temporal and spatial parameters while subjects walk on the floor. By using the propagation delay of sound when transmitted in air, this system is able to record the position of the subjects' feet. A small ultrasonic receiver is attached to both shoes of the subject while a transmitter is placed stationary on the floor. Four healthy subjects were used to test the device. Subtracting positions of the foot with zero velocity yielded step and stride length. The duration of stance and swing phase was calculated from heel-strike and toe-off. Comparison with data obtained from foot contact switches showed that applying two relative thresholds to the speed graph of the foot could reliably generate heel-strike and toe-off. Although the device is tested on healthy subjects in this study, it promises to be extremely valuable in examining pathological gait. When gait is asymmetrical, walking speed is not constant or when patients do not completely lift their feet, most existing devices will fail to correctly assess the proper gait parameters. Our device does not have this shortcoming and it will accurately demonstrate asymmetries and variations in the patient's gait. As an example, the recording of a left hemiplegic patient is presented in the discussion.     

Alternating-electric-field-enhanced reversible switching of DNA nanocontainers with pH

Macroscopically realizable applications of DNA-based molecular devices require individual molecules to cooperate with each other. However, molecular crowding usually introduces disorder to the system, thus jeopardizing the molecular cooperation and slowing down their functional performance dramatically. A challenge remaining in this field is to obtain both smarter response and better cooperation simultaneously. Here, we report a swift-switching DNA nanodevice that is enhanced by an alternating electric field. The device, self-assembled from folded four-stranded DNA motifs, can robustly switch between closed and open states in smart response to pH stimulus, of which the closed state forms a nanometer-height container that is impermeable to small molecules. This character was used to directly and non-specifically catch and release small molecules emulating mechanical hand in a controllable way. The alternating electric field was used to accelerate molecular cooperative motion during the device switching, which in turn shortened the closing time remarkably to thirty seconds.     

A new device for the capture and transport of small nonhuman primates in scientific research

Conventional methods of capturing marmosets and other small nonhuman primates (NHPs) require prolonged physical contact between animals and their handlers. This causes NHPs to become stressed and exhausted and can put both animals and handlers at risk of injury or exposure to infectious diseases. The authors designed a self-contained device for the capture and transport of small NHPs. Food rewards encourage primates to enter the device independently, and handlers can then easily access the animals for routine veterinary or experimental procedures. Preliminary observations suggest that marmosets quickly become accustomed to the device and that the device causes less stress than capture by hand or by net.     

Simple,Highly Efficient Vacuum‐Processed Bulk Heterojunction Solar Cells Based on Merocyanine Dyes

In order to be competitive on the energy market, organic solar cells with higher efficiency are needed. To date, polymer solar cells have retained the lead with efficiencies of up to 8%. However, research on small molecule solar cells has been catching up throughout recent years and is showing similar efficiencies, however, only for more sophisticated multilayer device configurations. In this work, a simple, highly efficient, vacuum‐processed small molecule solar cell based on merocyanine dyes – traditional colorants that can easily be mass‐produced and purified – is presented. In the past, merocyanines have been successfully introduced in solution‐processed as well as vacuum‐processed devices, demonstrating efficiencies up to 4.9%. Here, further optimization of devices is achieved while keeping the same simple layer stack, ultimately leading to efficiencies beyond the 6% mark. In addition, physical properties such as the charge carrier transport and the cell performance under various light intensities are addressed.