Genetic mapping of QTLs for sugar-related traits in a RIL population of Sorghum bicolor L. Moench

The productivity of sorghum is mainly determined by quantitative traits such as grain yield and stem sugar-related characteristics. Substantial crop improvement has been achieved by breeding in the last decades. Today, genetic mapping and characterization of quantitative trait loci (QTLs) is considered a valuable tool for trait enhancement. We have investigated QTL associated with the sugar components (Brix, glucose, sucrose, and total sugar content) and sugar-related agronomic traits (flowering date, plant height, stem diameter, tiller number per plant, fresh panicle weight, and estimated juice weight) in four different environments (two locations) using a population of 188 recombinant inbred lines (RILs) from a cross between grain (M71) and sweet sorghum (SS79). A genetic map with 157 AFLP, SSR, and EST-SSR markers was constructed, and several QTLs were detected using composite interval mapping (CIM). Further, additive × additive interaction and QTL × environmental interaction were estimated. CIM identified more than five additive QTLs in most traits explaining a range of 6.0–26.1% of the phenotypic variation. A total of 24 digenic epistatic locus pairs were identified in seven traits, supporting the hypothesis that QTL analysis without considering epistasis can result in biased estimates. QTLs showing multiple effects were identified, where the major QTL on SBI-06 was significantly associated with most of the traits, i.e., flowering date, plant height, Brix, sucrose, and sugar content. Four out of ten traits studied showed a significant QTL × environmental interaction. Our results are an important step toward marker-assisted selection for sugar-related traits and biofuel yield in sorghum.     

Identification of QTLs with additive,epistatic and QTL × development interaction effects for seed dormancy in rice

Seed dormancy (SD) is an important agronomic trait affecting crop yield and quality. In this study, one rice population of recombinant inbred lines (RILs) was used to determine the genetic characteristics of SD at the early (4 weeks after heading), middle (5 weeks after heading) and late (6 weeks after heading) development stages. The level of SD decreased with the process of seed development, and the SD was significantly affected by the heading date (HD) and temperature at the early and middle development stages. A total of eight additive quantitative trait loci (QTLs) for SD were identified at three development stages, and more QTLs were expressed at the early and late development stages. Among them, four, one and three additive QTLs were identified at the early, middle and late development stages, respectively. Epistatic QTLs and QTL-by-development interactions were detected by the joint analysis of multi-development phenotypic values, and one additive and two epistatic QTLs were identified. The phenotypic variation of SD explained by each additive, epistatic QTL and QTL × development interaction ranged from 8.0 to 13.5 %, 0.7 to 3.9 % and 1.3 to 2.8 %, respectively. One major QTL qSD7.1 for SD was tightly linked to the major QTL qHD7.4 for HD, which might be applied to reveal the relationship of SD and HD. By comparing chromosomal positions of these additive QTLs with those previously identified, five additive QTLs qSD1.1, qSD2.1, qSD2.2, qSD4.1 and qSD4.2 might represent novel genes. The best three cross combinations for the development of RIL populations were predicted to improve SD. The selected RILs and the identified QTLs might be applicable to improve the rice pre-harvest sprouting tolerance by the marker-assisted selection approach.     

Dynamic quantitative trait locus analysis of seed dormancy at three development stages in rice

In this study, a rice population of recombinant inbred lines (RILs) was used to determine the genetic characteristics of seed dormancy (SD) at 4 (early), 5 (middle) and 6 (late) weeks after heading stages. Dynamic analysis showed that the indica IR28 variety tended to have deeper dormancy than the japonica Daguandao at the middle and late development stages. The level of SD decreased with the process of seed development. The significant interaction between heading date (HD) and SD occurred only in those seeds collected at the early development stage. A total of nine additive quantitative trait loci (QTLs) and eight epistatic QTLs for SD were identified at three seed development stages. Of them, one additive and four epistatic QTLs were identified for the early stage, six additive and one epistatic QTL for the middle stage and two additive and three epistatic QTLs for the late stage. The phenotypic variation explained by each additive and epistatic QTL ranged from 5.8 to 30.6 % and from 3.8 to 13.1 %, respectively. Compared with the additive QTLs, epistatic interactions were much more important for SD at the early and late development stages. Two major additive QTLs, qSD3.1 and qSD4.1, were identified; each QTL could explain more than 20 % of the total phenotypic variance and each dormancy-enhancing allele could decrease the germination percentage by about 10 %. By comparing the chromosomal positions of these additive QTLs with those previously identified, five additive QTLs, qSD1.2, qSD2.1, qSD3.2, qSD4.1 and qSD9.1, might represent novel genes. One QTL identified here, qHD1, and nine QTLs identified in previous studies for HD were co-located with our QTLs for SD, which indicated that the significant correlation between SD and HD might be due to the linkage of QTLs for SD and HD. Four RILs with deep dormancy at development stages but non-dormancy after post-ripening under different germination conditions were selected. Using the selected RILs, three cross combinations of SD for the development of RIL populations were predicted. The selected RILs and the identified QTLs might be applicable for the improvement of pre-harvest sprouting tolerance by marker-assisted selection in rice.     

Identification of QTLs with Additive,Epistatic, and QTL × Seed Maturity Interaction Effects for Seed Vigor in Rice

Seed maturity is a critical process of seed vigor establishment. In this study, one rice population of recombinant inbred lines (RILs) was used to determine the genetic characteristics of seed vigor, including the germination potential (GP), germination rate (GR), germination index (GI), and time for 50 % of germination (T₅₀), at 4, 5, and 6 weeks after heading in 2 years. Significant differences of seed vigor were observed among two parents and RIL population; the heritability of four traits was more than 90 % at three maturity stages. A total of 19 additive and 2 epistatic quantitative trait loci (QTL) for seed vigor were identified using QTL Cartographer and QTLNetwork program, respectively, in 2012, while 16 simple sequence repeat (SSR) markers associated with seed vigor were detected using bulked segregant analysis (BSA) in 2013. The phenotypic variation explained by each additive, epistatic QTL, and QTL × seed maturity interaction ranged from 9.19 to 22.94 %, 7.23 to 7.75 %, and 0.05 to 0.63 %, respectively. Ten additive QTLs were stably expressed in 2 years which might play important roles in establishment of seed vigor in different environments. By comparing chromosomal positions of ten stably expressed additive QTLs with those previously identified, they might be true QTLs for seed vigor; the regions of QTLs for seed vigor are likely to coincide with QTLs for seed dormancy, seed reserve mobilization, low-temperature germinability, and seedling growth. Using four selected RILs, three cross-combinations were predicted to improve seed vigor; 9 to 10 elite alleles could be pyramided by each combination. The selected RILs and the identified QTLs might be applicable for the improvement of seed vigor by marker-assisted selection (MAS) in rice.     

Mapping QTLs with epistatic effects and QTL×environment interactions by mixed linear model approaches

A new methodology based on mixed linear models was developed for mapping QTLs with digenic epistasis and QTL×environment (QE) interactions. Reliable estimates of QTL main effects (additive and epistasis effects) can be obtained by the maximum-likelihood estimation method, while QE interaction effects (additive×environment interaction and epistasis×environment interaction) can be predicted by the-best-linear-unbiased-prediction (BLUP) method. Likelihood ratio and t statistics were combined for testing hypotheses about QTL effects and QE interactions. Monte Carlo simulations were conducted for evaluating the unbiasedness, accuracy, and power for parameter estimation in QTL mapping. The results indicated that the mixed-model approaches could provide unbiased estimates for both positions and effects of QTLs, as well as unbiased predicted values for QE interactions. Additionally, the mixed-model approaches also showed high accuracy and power in mapping QTLs with epistatic effects and QE interactions. Based on the models and the methodology, a computer software program (QTLMapper version 1.0) was developed, which is suitable for interval mapping of QTLs with additive, additive×additive epistasis, and their environment interactions. Received: 23 October 1998 / Accepted: 11 May 1999     

Impact of epistasis and QTL×environment interaction on the developmental behavior of plant height in rice (Oryza sativa L.)

QTLs with epistatic effects and environmental interaction effects for the developmental behavior of plant height in rice were studied by conventional and conditional methods for quantitative trait loci (QTLs) by mapping with a doubled-haploid population of 123 lines from IR64/Azucena in three environments. The results showed that epistatic effects were important and most epistasis could be detected only by conditional QTL mapping, while most non–epistatic QTLs could be detected by both conventional and conditional methods. Many modificative QTLs showed only epistatic effects without their own additive effects at some stages. QTL×environment (QE) interaction effects were detected more often than QTL main effects for plant-height behavior, which might indicate that gene expression could be greatly affected by the environment. No QTLs had effects during the whole of ontogeny. Conditional QTL mapping might be a valid way to reveal dynamic gene expression for the development of quantitative traits, especially for epistatic effects. Received: 19 May 2000 / Accepted: 27 October 2000     

Mapping QTLs and meta-QTLs for two inflorescence architecture traits in multiple maize populations under different watering environments

Drought significantly affects the architectural development of maize inflorescence, which leads to massive losses in grain yield. However, the genetic mechanism for traits involved in inflorescence architecture in different watering environments, remains poorly understood in maize. In this study, 19 QTLs for tassel primary branch number (TBN) and ear number per plant (EN) were detected in 2 F_2:3 populations under both well-watered and water-stressed environments by single environment mapping with composite interval mapping (CIM); 11/19 QTLs were detected under water-stressed environments. Moreover, 21 QTLs were identified in the 2 F_2:3 populations by joint analysis of all environments with a mixed linear model based on composite interval mapping (MCIM), 11 QTLs were involved in QTL × environment interactions, seven epistatic interactions were identified with additive by additive/dominance effects. Remarkably, 12 stable QTLs (sQTLs) were simultaneously detected by single environment mapping with CIM and joint analysis through MCIM, which were concentrated in ten bins across the chromosomes: 1.05_1.07, 1.08_1.10, 2.01_2.04, 3.01, 4.06, 4.09, 5.06_5.07, 6.05, 7.00, and 7.04 regions. Twenty meta-QTLs (mQTLs) were detected across 19 populations under 51 watering environments using a meta-analysis, and 34 candidate genes were predicted in corresponding mQTLs regions to be involved in the regulation of inflorescence development and drought resistance. Therefore, these results provide valuable information for finding quantitative trait genes and to reveal the genetic mechanisms responsible for TBN and EN under different watering environments. Furthermore, alleles for TBN and EN provide useful targets for marker-assisted selection to generate high-yielding maize varieties.     

Mapping QTLs for Component Traits Influencing Drought Stress Tolerance of Maize (Zea mays L) in India

The present study was aimed at mapping of Quantitative Trait Loci (QTL) for various traits influencing the performance of maize genotypes under drought stress conditions in India. A set of 210 Recombinant Inbred Lines (RILs) developed at CIMMYT (Mexico) was analyzed in drought trials undertaken at Karimnagar (2002-03) and Hyderabad (2003-04). Analyses of the RIL datasets using Composite Interval Mapping (CIM) models led to the detection of 52 QTLs, including 22 QTLs under the control conditions and 30 QTLs under drought stress conditions at Karimnagar, and 14 QTLs influencing various characters under drought stress conditions at Hyderabad. A significant digenic epistatic QTL effect, other than the main effect QTLs, was detected for kernel number per ear under drought stress conditions. A comparison of the QTL information obtained from independent analyses of the Karimnagar and Hyderabad datasets revealed colocalization of QTLs on chromosomes 1, 2, 8 and 10 in the RILs influencing specific characters under drought stress conditions. Comparison of the QTL information with that reported from previous analyses of the same set of RILs at Mexico, Kenya and Zimbabwe revealed some ‘consensus QTLs’, which could be of significance in molecular marker-assisted breeding for drought tolerance in maize, besides functional genomics.     

Identification of major QTLs and epistatic interactions for seed protein concentration in soybean under multiple environments based on a high-density map

The concentration of protein in soybean is an important trait that drives successful soybean quality. A recombinant inbred line derived from a cross between the Charleston and Dongnong594 cultivars was planted in one location across 10 years and two locations across 5 years in China (20 environments in total), and the genetic effects were partitioned into additive main effects, epistatic main effects and their environmental interaction effects using composite interval mapping and inclusive composite interval mapping models based on a high-density genetic map. Ten main-effect quantitative trait loci (QTLs) were identified on chromosomes 3, 6, 7, 13, 15 and 20 and detected in more than three environments, with each of the main-effect QTLs contributing a phenotypic variation of around 10 %. Between the intervals of the main-effect QTLs, 93 candidate genes were screened for their involvement in seed protein storage and/or amino acid biosynthesis and metabolism processes based on gene ontology and annotation information. Furthermore, an analysis of epistatic interactions showed that three epistatic QTL pairs were detected, and could explain approximately 50 % of the phenotypic variation. The additive main-effect QTLs and epistatic QTL pairs contributed to high phenotypic variation under multiple environments, and the results were also validated and corroborated with previous research, indicating that marker-assisted selection can be used to improve soybean protein concentrations and that the candidate genes can also be used as a foundation data set for research on gene function.     

Dynamic Quantitative Trait Loci Analysis of Seed Reserve Utilization during Three Germination Stages in Rice

In this study, one rice population of recombinant inbred lines (RILs) was used to determine the genetic characteristics of seed reserve utilization during the early (day 6), middle (day 10) and late (day 14) germination stages. The seedling dry weight (SDW) and weight of the mobilized seed reserve (WMSR) were increased, while the seed reserve utilization efficiency (SRUE) decreased, during the process of seed germination. The SDW and WMSR were affected by the seed weight, while the SRUE was not affected by the seed weight. A total of twenty unconditional and twenty-one conditional additive QTLs and eight epistatic QTLs were identified at three germination stages, and the more QTLs were expressed at the late germination stage. Among them, twelve additive and three epistatic QTLs for SDW, eight additive and three epistatic QTLs for WMSR and thirteen additive and two epistatic QTLs for SRUE were identified, respectively. The phenotypic variation explained by each additive QTL, epistatic QTL and QTL × development interaction ranged from 6.10 to 23.91%, 1.79 to 6.88% and 0.22 to 2.86%, respectively. Two major additive QTLs qWMSR7.1 and qSRUE4.3 were identified, and each QTL could explain more than 20% of the total phenotypic variance. By comparing the chromosomal positions of these additive QTLs with those previously identified, eleven QTLs might represent novel genes. The best four cross combinations of each trait for the development of RIL populations were selected. The selected RILs and the identified QTLs might be applicable to improve rice seed reserve utilization by the marker-assisted selection approach.     

Mapping and validation of QTLs for resistance to aphids and whiteflies in melon

Aphis gossypii and Bemisia tabaci are severe hemipteran pests of melon crops and breeding for resistance to both insects is required to reduce pesticide use. Resistance was evaluated for its effect on behaviour and biotic potential of both hemipterans in a population of recombinant inbred lines (RILs) derived from the cross Védrantais × PI 161375. Insect variability was considered using two A. gossypii clones and two B. tabaci populations. Two additive QTLs affected the whiteflies. Four additive QTLs and two couples of epistatic QTLs affected the aphids. Amongst them, a major QTL affects both behaviour and biotic potential of A. gossypii and therefore a same R gene induces both antixenosis and antibiosis. This major QTL colocalizes with the Vat gene belonging to the NBS-LRR gene family. No loci affected both aphids and whiteflies contrary to what was observed for the Mi1.2 gene, a NBS-LRR gene in tomato. Original populations with different allelic compositions at QTLs affecting A. gossypii were built by one inter-crossing of RILs used for the mapping process. The genetic background was shown homogeneous between these populations what allowed validating QTLs and investigating the effect of allelic combinations at QTLs. Effects of QTLs were stronger than expected and some QTLs had a wider spectrum than expected. This strategy of validation appeared rapid and low cost.     

Dynamic Quantitative Trait Locus Analysis of Seed Vigor at Three Maturity Stages in Rice

Seed vigor is an important characteristic of seed quality. In this study, one rice population of recombinant inbred lines (RILs) was used to determine the genetic characteristics of seed vigor, including the germination potential, germination rate, germination index and time for 50% of germination, at 4 (early), 5 (middle) and 6 weeks (late) after heading in two years. A total of 24 additive and 9 epistatic quantitative trait loci (QTL) for seed vigor were identified using QTL Cartographer and QTLNetwork program respectively in 2012; while 32 simple sequence repeat (SSR) markers associated with seed vigor were detected using bulked segregant analysis (BSA) in 2013. The additive, epistatic and QTL × development interaction effects regulated the dry maturity developmental process to improve seed vigor in rice. The phenotypic variation explained by each additive, epistatic QTL and QTL × development interaction ranged from 5.86 to 40.67%, 4.64 to 11.28% and 0.01 to 1.17%, respectively. The QTLs were rarely co-localized among the different maturity stages; more QTLs were expressed at the early maturity stage followed by the late and middle stages. Twenty additive QTLs were stably expressed in two years which might play important roles in establishment of seed vigor in different environments. By comparing chromosomal positions of these stably expressed additive QTLs with those previously identified, the regions of QTL for seed vigor are likely to coincide with QTL for grain size, low temperature germinability and seed dormancy; while 5 additive QTL might represent novel genes. Using four selected RILs, three cross combinations of seed vigor for the development of RIL populations were predicted; 19 elite alleles could be pyramided by each combination.     

Use of randomization testing to detect multiple epistatic QTLs

Here, we describe a randomization testing strategy for mapping interacting quantitative trait loci (QTLs). In a forward selection strategy, non-interacting QTLs and simultaneously mapped interacting QTL pairs are added to a total genetic model. Simultaneous mapping of epistatic QTLs increases the power of the mapping strategy by allowing detection of interacting QTL pairs where none of the QTL can be detected by their marginal additive and dominance effects. Randomization testing is used to derive empirical significance thresholds for every model selection step in the procedure. A simulation study was used to evaluate the statistical properties of the proposed randomization tests and for which types of epistasis simultaneous mapping of epistatic QTLs adds power. Least squares regression was used for QTL parameter estimation but any other QTL mapping method can be used. A genetic algorithm was used to search for interacting QTL pairs, which makes the proposed strategy feasible for single processor computers. We believe that this method will facilitate the evaluation of the importance at epistatic interaction among QTLs controlling multifactorial traits and disorders.     

Unconditional and conditional QTL analysis of kernel weight related traits in wheat (Triticum aestivum L.) in multiple genetic backgrounds

Wheat thousand kernel weight (TKW) is a complex trait, and is largely controlled by several kernel traits, including kernel length (KL) and kernel width (KW). In order to reveal the genetic relationship between TKW and these kernel traits (KW and KL) as accurate as possible, we applied both unconditional and conditional mapping analyses to three distinct genetic populations, one DH population and two RIL populations. This report describes the identifications of 36 unconditional and conditional additive QTLs and 30 pairs of unconditional and conditional epistatic QTLs, all of which are closely associated with TKW. While the conditional additive locus Qtkw1B, detected in the RIL2 population, exhibited the largest contribution, explaining 14.12 % of TKW variance, the unconditional epistatic QTLs Qtkw3A-2/Qtkw5B.1, detected in the DH population, accounted for 11.95 % of phenotypic variance. This study also showed that, compared with unconditional mapping, conditional mapping resulted in very different numbers and different extent of effects of additive and epistatic QTLs that were associated with TKW when TKW was conditioned on kernel traits (KW and KL). These data strongly suggest that KW and KL indeed play a significant role in determining TKW. Furthermore, we demonstrated that the effects of the 25 additive QTLs for TKW were either entirely or largely determined by KW, while the effects of the other 25 additive QTLs for TKW were either entirely or largely affected by KL. We conclude that the conditional mapping can be useful for a better understanding of the interrelationship between the yield contributing traits at the QTL level.     

Cytonuclear epistatic quantitative trait locus mapping for plant height and ear height in maize

Plant height (PH) and ear height (EH) are important traits in maize (Zea mays L.) breeding. Previous research has indicated that these traits are influenced by quantitative trait loci (QTL). However, previous studies attempting to identify the genetic bases of PH and EH have ignored the possibility that cytoplasmic effects and cytonuclear interactions may influence these traits. The objectives of this study were to identify the cytonuclear epistatic QTL and to evaluate the contributions of cytoplasm and QTL × cytoplasm interactions to phenotypic variation of PH and EH. A reciprocal mating design was conducted to generate F2 mapping populations comprising 120 F2 plants from the direct cross (JB × Y53) and 120 F2 plants from the reciprocal cross (Y53 × JB). F2:3 mapping populations were further generated with 91 direct F2:3 families and 120 reciprocal F2:3 families (ten plants per family). The PH and EH of the above F2 and F2:3 mapping populations were evaluated in the same field at the same experimental station in 2007 and 2008. A genetic linkage map with 154 microsatellite markers was constructed, which covered 1,735.0 cM of the maize genome with an average marker spacing of 11.3 cM. A joint-analysis method incorporating the cytonuclear interaction mapping approach was proposed and performed to detect cytonuclear interacting QTL affecting PH and EH. We identified six cytonuclear epistatic QTL affecting PH and five affecting EH. The average phenotypic variance explained by the genetic components of the QTL × cytoplasm interaction for each QTL was 18 % for PH and 9 % for EH. In addition, we observed cytoplasmic effects contributing substantially to phenotypic variance, reaching 9 and 40 % of the phenotypic contributions to PH and EH, respectively.     

QTL Analysis of Na+ and K+ Concentrations in Roots and Shoots under Different Levels of NaCl Stress in Rice (Oryza sativa L.)

The key to plant survival under NaCl salt stress is maintaining a low Na⁺ level or Na⁺/K⁺ ratio in the cells. A population of recombinant inbred lines (RILs, F_2∶9) derived from a cross between the salt-tolerant japonica rice variety Jiucaiqing and the salt-sensitive indica variety IR26, was used to determine Na⁺ and K⁺ concentrations in the roots and shoots under three different NaCl stress conditions (0, 100 and 120 mM NaCl). A total of nine additive QTLs were identified by QTL Cartographer program using single-environment phenotypic values, whereas eight additive QTLs were identified by QTL IciMapping program. Among these additive QTLs, five were identified by both programs. Epistatic QTLs and QTL-by-environment interactions were detected by QTLNetwork program in the joint analyses of multi-environment phenotypic values, and one additive QTL and nine epistatic QTLs were identified. There were three epistatic QTLs identified for Na⁺ in roots (RNC), three additive QTLs and two epistatic QTLs identified for Na⁺ in shoots (SNC), four additive QTLs identified for K⁺ in roots (RKC), four additive QTLs and three epistatic QTLs identified for K⁺ in shoots (SKC) and one additive QTL and one epistatic QTL for salt tolerance rating (STR). The phenotypic variation explained by each additive, epistatic QTL and QTL×environment interaction ranged from 8.5 to 18.9%, 0.5 to 5.3% and 0.7 to 7.5%, respectively. By comparing the chromosomal positions of these additive QTLs with those previously identified, five additive QTLs, qSNC9, qSKC1, qSKC9, qRKC4 and qSTR7, might represent novel salt tolerance loci. The identification of salt tolerance in selected RILs showed that a major QTL qSNC11 played a significant role in rice salt tolerance, and could be used to improve salt tolerance of commercial rice varieties with marker-assisted selection (MAS) approach.     

水稻耐储藏特性三年动态鉴定与QTL分析

种子耐储藏特性是粮食作物的特殊农艺性状之一, 耐储藏性能对种子生产和种质资源保存有重要意义。以粳型超级稻龙稻5 (LD5)和高产籼稻中优早8 (ZYZ8)杂交衍生的重组自交系(RILs)群体(共180个株系)为实验材料, 自然高温高湿条件下放置1年、2年和3年后, 对不同储藏时段种子发芽率进行比较, 并利用223个分子标记的遗传图谱进行动态QTL鉴定。结果表明, 不同储藏时段龙稻5的发芽率均显著低于中优早8, 株系间耐储性存在较大差异; 不同储藏时段发芽率显著相关, 相邻存储时段发芽率关系紧密。共检测到17个耐储性相关的QTLs, 3个老化时段分别检测到5、4和3个, 检测到5个动态条件QTLs, 单一QTL解释5.60%-32.76%的表型变异, 加性效应在-16.78%-16.95%范围内。主效QTL簇qSSC2、qSSC6、qSSC7和qSSC8能调控不同储藏时段的发芽率, qSSC6具有明显降低发芽率的效应。共检测到26对上位性互作位点, 主效QTL qSS1和qSS4参与上位性互作, 这表明上位性互作是调控耐储藏性状的重要遗传组成。研究结果为水稻(Oryza sativa)耐储性相关QTL的精细定位奠定基础, 同时丰富了耐储性分子标记辅助选择育种的基因资源。     

水稻耐储藏特性三年动态鉴定与QTL分析

种子耐储藏特性是粮食作物的特殊农艺性状之一, 耐储藏性能对种子生产和种质资源保存有重要意义。以粳型超级稻龙稻5 (LD5)和高产籼稻中优早8 (ZYZ8)杂交衍生的重组自交系(RILs)群体(共180个株系)为实验材料, 自然高温高湿条件下放置1年、2年和3年后, 对不同储藏时段种子发芽率进行比较, 并利用223个分子标记的遗传图谱进行动态QTL鉴定。结果表明, 不同储藏时段龙稻5的发芽率均显著低于中优早8, 株系间耐储性存在较大差异; 不同储藏时段发芽率显著相关, 相邻存储时段发芽率关系紧密。共检测到17个耐储性相关的QTLs, 3个老化时段分别检测到5、4和3个, 检测到5个动态条件QTLs, 单一QTL解释5.60%-32.76%的表型变异, 加性效应在-16.78%-16.95%范围内。主效QTL簇qSSC2、qSSC6、qSSC7和qSSC8能调控不同储藏时段的发芽率, qSSC6具有明显降低发芽率的效应。共检测到26对上位性互作位点, 主效QTL qSS1和qSS4参与上位性互作, 这表明上位性互作是调控耐储藏性状的重要遗传组成。研究结果为水稻(Oryza sativa)耐储性相关QTL的精细定位奠定基础, 同时丰富了耐储性分子标记辅助选择育种的基因资源。     

Gene actions of QTLs affecting several agronomic traits resolved in a recombinant inbred rice population and two testcross populations

To understand the types of gene action controlling seven quantitative traits in rice, QTL mapping was performed to dissect the main effect (M-QTLs) and digenic epistatic (E-QTLs) QTLs responsible for the trait performance of 254 recombinant inbred lines (RILs) of "Lemont/Teqing", and two testcross (TC) F(1) populations derived from these RILs. The correlation analyses reveal a general pattern, i.e. trait heritability in the RILs was negatively correlated to trait heterosis in the TC hybrids. A large number of M-QTLs and E-QTLs affecting seven traits, including heading date (HD), plant height (PH), flag leaf length (FLL), flag leaf width (FLW), panicle length (PL), spikelet number per panicle (SN) and spikelet fertility (SF), were identified and could be classified into two predominant groups, additive QTLs detected primarily in the RILs, and overdominant QTLs identified exclusively in the TC populations. There is little overlap between QTLs identified in the RILs and in the TC populations. This result implied that additive gene action is largely independent from non-additive gene action in the genetic control of quantitative traits of rice. The detected E-QTLs collectively explained a much greater portion of the total phenotypic variation than the M-QTLs, supporting prior findings that epistasis has played an important role in the genetic control of quantitative traits in rice. The implications of these results to the development of inbred and hybrid cultivars were discussed.