Identification and characterization of SSRs from soybean (Glycine max) ESTs

Microsatellites, or simple sequence repeats (SSRs), are very useful molecular markers for a number of plant species. We used a new publicly available module (TROLL) to extract microsatellites from the public database of soybean expressed sequence tag (EST) sequences. A total of 12,833 sequences containing di- to penta-type SSRs were identified from 200,516 non-redundant soybean ESTs. On average, one SSR was found per 7.25?kb of EST sequences, with the tri-nucleotide motifs being the most abundant. Primer sequences flanking the SSR motifs were successfully designed for 9,638 soybean ESTs using the software primer3.0 and only 59 pairs of them were found in earlier studies. We synthesized 124 pairs of the primers to determine the polymorphism and heterozygosity among eight genotypes of soybean cultivars, which represented a wide range of the cultivated soybean cultivars. PCR amplification products with anticipated SSRs were obtained with 81 pairs of primers; 36 PCR products appeared to be homozygous and the remaining 45 PCR products appeared to be heterozygous and displayed polymorphism among the eight cultivars. We further analysed the EST sequences containing 45 polymorphic EST-SSR markers using the programs BLASTN and BLASTX. Sequence alignment showed that 29 ESTs have homologous sequences and 15 ESTs could be classified into a Uni-gene cluster with comparatively convincing protein products. Among these 15 ESTs belonging to a Uni-gene cluster, 9 SSRs were located in 3'-UTR, 4 SSRs were located in the intron region and 2 SSRs were located in the CDS region. None of these SSRs was located in the 5'-UTR. These novel SSRs identified in the ESTs of soybean provide useful information for gene mapping and cloning in future studies.     

Development and characterisation of simple sequence repeat (SSR) markers for white clover (Trifolium repens L.)

Highly informative molecular markers, such as simple sequence repeats (SSRs), can greatly accelerate breeding programs. The aim of this study was to develop and characterise a comprehensive set of SSR markers for white clover (Trifolium repens L.), which can be used to tag genes and quantitative trait loci controlling traits of agronomic interest. Sequence analysis of 1123 clones from genomic libraries enriched for (CA) _n repeats yielded 793 clones containing SSR loci. The majority of SSRs consisted of perfect dinucleotide repeats, only 7% being trinucleotide repeats. After exclusion of redundant sequences and SSR loci with less than 25 bp of flanking sequence, 397 potentially useful SSRs remained. Primer pairs were designed for 117 SSR loci and PCR products in the expected size range were amplified from 101 loci. These markers were highly polymorphic, 88% detecting polymorphism across seven white clover genotypes with an average allele number of 4.8. Four primer pairs were tested in an F₂ population revealing Mendelian segregation. Successful cross-species amplification was achieved in at least one out of eight legume species for 46 of 54 primer pairs. The rate of successful amplification was significantly higher for Trifolium species when compared to species of other genera. The markers developed in this study not only provide valuable tools for molecular breeding of white clover but may also have applications in related taxa. Received: 3 April 2000 / Accepted: 12 May 2000     

SSR allelic variation in almond (Prunus dulcis Mill.)

Sixteen SSR markers including eight EST-SSR and eight genomic SSRs were used for genetic diversity analysis of 23 Chinese and 15 international almond cultivars. EST- and genomic SSR markers previously reported in species of Prunus, mainly peach, proved to be useful for almond genetic analysis. DNA sequences of 117 alleles of six of the 16 SSR loci were analysed to reveal sequence variation among the 38 almond accessions. For the four SSR loci with AG/CT repeats, no insertions or deletions were observed in the flanking regions of the 98 alleles sequenced. Allelic size variation of these loci resulted exclusively from differences in the structures of repeat motifs, which involved interruptions or occurrences of new motif repeats in addition to varying number of AG/CT repeats. Some alleles had a high number of uninterrupted repeat motifs, indicating that SSR mutational patterns differ among alleles at a given SSR locus within the almond species. Allelic homoplasy was observed in the SSR loci because of base substitutions, interruptions or compound repeat motifs. Substitutions in the repeat regions were found at two SSR loci, suggesting that point mutations operate on SSRs and hinder the further SSR expansion by introducing repeat interruptions to stabilize SSR loci. Furthermore, it was shown that some potential point mutations in the flanking regions are linked with new SSR repeat motif variation in almond and peach. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Length Polymorphisms of Simple Sequence Repeat DNA in Soybean

The objective of this work was to ascertain the presence and degree of simple sequence repeat (SSR) DNA length polymorphism in the soybean [Glycine max (L.) Merr.]. A search of GenBank revealed no (CA)n or (GT)n SSRs with n greater than 8 in soybean. In contrast, 5 (AT)n and 1 (ATT)n SSRs with n ranging from 14 to 27 were detected. Polymerase chain reaction (PCR) primers to regions flanking the six SSR loci were used in PCR amplification of DNA from 43 homozygous soybean genotypes. At three loci, amplification produced one PCR product per genotype and revealed 6, 7 and 8 product length variants (alleles) at the three loci, respectively. F1 hybrids between parents carrying different alleles produced two PCR products identical to the two parents. Codominant segregation of alleles among F2 progeny was demonstrated at each locus. A soybean DNA library was screened for the presence of (CA/GT)n SSRs. Sequencing of positive clones revealed that the longest such SSR was (CA)9. Thus, (CA)n SSRs with n of 15 or more are apparently much less common in soybean than in the human genome. In contrast to humans, (CA)n SSRs will probably not provide an abundant source of genetic markers in soybean. However, the apparent abundance of long (AT)n sequences should allow this SSR to serve as a source of highly polymorphic genetic markers in soybean.     

Identification of polymorphic,conserved simple sequence repeats (SSRs) in cultivated Brassica species

The application of simple sequence repeat (SSR) genotyping for the characterization of genetic variation in crop plants has been hindered by ready access to useful primer pairs and potentially limited conservation of the repeat sequences among related species. In this phase of work, we report on the identification and characterization of SSRs that are conserved in Brassica napus L. (rapeseed) and its putative progenitors, B. oleracea L. (cabbage, and related vegetable types) and B. rapa (vegetable and oil types). Approximately 140 clones from a size-fractionated genomic library of B. napus were sequenced, and primer pairs were designed for 21 dinucleotide SSRs. Seventeen primer pairs amplified products in the three species and, among these, 13 detected variation between and within species. Unlike findings on SSR information content in human, no relationship could be established between the number of tandem repeats within the target sequence and heterozygosity. All primer pairs have been designed to work under identical amplification conditions; therefore, single-reaction, multiplex polymerase chain reaction (PCR) with these SSRs is possible. Once moderate numbers of primer pairs are accessible to the user community, SSR genotyping may provide a useful method for the characterization, conservation, and utilization of agricultural crop diversity.     

Analysis of SSRs derived from grape ESTs

One hundred and twenty four microsatellites were isolated from analysis of 5000 Vitis expressed sequence tags (ESTs). A diversity of dinucleotide and trinucleotide simple sequence repeat (SSR) motifs were present. Primers were designed for 16 of these SSRs and they were tested on seven accessions. Ten of the sixteen primer pairs resulted in PCR products of the expected size. All ten functional primers were polymorphic across the accessions studied. Polymorphisms were evident at the level of cultivars, Vitis species, and between related genera. SSRs that were from the 3′ untranslated region (3′UTR) were most polymorphic at the cultivar level, the 5′ untranslated region (5′ UTR) SSRs were most polymorphic between cultivars and species, and those SSRs within coding sequence were most polymorphic between species and genera. These results show that EST-derived SSRs in Vitis are useful as they are polymorphic and highly transferable. With EST SSRs being applicable to studies at several taxonomic levels, the large number of SSRs (approximately 1000) that will be available from an expanded EST database of 45 000 will have many potential applications in mapping and identity research. Received: 4 June 1999 / Accepted: 21 September 1999     

Targeted development of informative microsatellite (SSR) markers

We describe a novel approach, selectively amplified microsatellite (SAM) analysis, for the targeted development of informative simple sequence repeat (SSR) markers. A modified selectively amplified microsatellite polymorphic loci assay is used to generate multi-locus SSR fingerprints that provide a source of polymorphic DNA markers (SAMs) for use in genetic studies. These polymorphisms capture the repeat length variation associated with SSRs and allow their chromosomal location to be determined prior to the expense of isolating and characterising individual loci. SAMs can then be converted to locus-specific SSR markers with the design and synthesis of a single primer specific to the conserved region flanking the repeat. This approach offers a cost-efficient and rapid method for developing SSR markers for predetermined chromosomal locations and of potential informativeness. The high recovery rate of useful SSR markers makes this strategy a valuable tool for population and genetic mapping studies. The utility of SAM analysis was demonstrated by the development of SSR markers in bread wheat.     

Development, characterisation, and across-taxa utility of oil palm (Elaeis guineensis Jacq.) microsatellite markers.

The results of the development of oil palm (Elaeis guineensis Jacq.) microsatellite markers are given step by step, from the screening of libraries enriched in (GA)n, (GT)n, and (CCG)n simple-sequence repeats (SSRs) to the final characterisation of 21 SSR loci. Also published are primer sequences, estimates of allele size range, and expected heterozygosity in E. guineensis and in the closely related species E. oleifera, in which an optimal utility of the SSR markers was observed. Multivariate data analyses showed the ability of SSR markers to efficiently reveal the genetic-diversity structure of the genus Elaeis in accordance with known geographical origins and with measured genetic relationships based on previous molecular studies. High levels of allelic variability indicated that E. guineensis SSRs will be a powerful tool for genetic studies of the genus Elaeis, including variety identification and intra- or inter-specific genetic mapping. PCR amplification tests on a subset of 16 other palm species and allele-sequence data showed that E. guineensis SSRs are putative transferable markers across palm taxa. In addition, phenetic information based on SSR flanking region sequences makes E. guineensis SSR markers a potentially useful molecular resource for any researcher studying the phylogeny of palm taxa.     

A new approach to extending the wheat marker pool by anchored PCR amplification of compound SSRs

A study was undertaken to determine the utility in bread wheat of anchored PCR for the development of single locus SSR markers targeted at compound repeat motifs. In anchored PCR, microsatellite amplification is achieved using a single primer complementary to the flanking sequence, and one which anchors to the repeat junction of the compound SSR. The recovery rate of useable markers was found to be similar (43%) to that reported for conventionally generated SSRs. Thus, anchored PCR can be used to reduce the costs of marker development, since it requires that only half the number of primers be synthesised. Where fluorescence-based platforms are used, marker deployment costs are lower, since only the anchoring primers need to be labelled. In addition, anchored PCR improves the recovery of useful markers, as it allows assays to be generated from microsatellite clones with repeat sequences located close to their ends, a situation where conventional PCR amplification fails as two flanking primers cannot be designed. Strategies to permit the large-scale development of compound SSR markers amplified by anchored PCR are discussed.Communicated by P. Langridge     

Development of multiplex sets of simple sequence repeat DNA markers covering the soybean genome

Multiplexing involves the analysis of several markers in a single gel lane that is based on the allele size range of marker loci. Multiplex SSR marker analysis is conducted with primers that are labeled with one of three dyes. The development of an SSR multiplex system requires estimates of the allele size range of markers to strategize primer labeling and for grouping markers into multiplex sets. A method is presented that describes the development of multiplex sets of SSR markers in soybean (Glycine max (L.) Merr.) by the selective placement of primer sites and by the analysis of diverse germplasm. Primer sites were placed at specific distances from the SSR to adjust the allele size range of marker loci. The analysis of pooled DNA samples comprising diverse soybean genotypes provided robust estimates of the allele size range of marker loci that enabled the development of multiplex sets. Eleven multiplex sets comprising 74 SSR markers distributed across the 20 linkage groups of soybean were developed. Multiplex sets constructed from the analysis of diverse soybean germplasm should have a wide range of genotyping applications. The procedures used in this study were systematic and rapid and should be applicable for multiplex development in any species with SSR marker technology.     

Sequence tagged microsatellite profiling (STMP): improved isolation of DNA sequence flanking target SSRs

Sequence tagged microsatellite profiling (STMP) enables the rapid development of large numbers of co-dominant DNA markers, known as sequence tagged microsatellites (STMs). Each STM is amplified by PCR using a single primer specific to the conserved DNA sequence flanking the microsatellite repeat in combination with a universal primer that anchors to the 5′-ends of the microsatellites. It is also possible to convert STMs into conventional microsatellite, or simple sequence repeat (SSR), markers that are amplified using a pair of primers flanking the repeat sequence. Here, we describe a modification of the STMP procedure to significantly improve the capacity to convert STMs into conventional SSRs and, therefore, facilitate the development of highly specific DNA markers for purposes such as marker-assisted breeding. The usefulness of this technique was demonstrated in bread wheat.     

Sequence-tagged microsatellite profiling (STMP): a rapid technique for developing SSR markers

We describe a technique, sequence-tagged microsatellite profiling (STMP), to rapidly generate large numbers of simple sequence repeat (SSR) markers from genomic or cDNA. This technique eliminates the need for library screening to identify SSR-containing clones and provides an approximately 25-fold increase in sequencing throughput compared to traditional methods. STMP generates short but characteristic nucleotide sequence tags for fragments that are present within a pool of SSR amplicons. These tags are then ligated together to form concatemers for cloning and sequencing. The analysis of thousands of tags gives rise to a representational profile of the abundance and frequency of SSRs within the DNA pool, from which low copy sequences can be identified. As each tag contains sufficient nucleotide sequence for primer design, their conversion into PCR primers allows the amplification of corresponding full-length fragments from the pool of SSR amplicons. These fragments permit the full characterisation of a SSR locus and provide flanking sequence for the development of a microsatellite marker. Alternatively, sequence tag primers can be used to directly amplify corresponding SSR loci from genomic DNA, thereby reducing the cost of developing a microsatellite marker to the synthesis of just one sequence-specific primer. We demonstrate the utility of STMP by the development of SSR markers in bread wheat.     

Sequence-tagged microsatellite profiling (STMP): a rapid technique for developing SSR markers

We describe a technique, sequence-tagged microsatellite profiling (STMP), to rapidly generate large numbers of simple sequence repeat (SSR) markers from genomic or cDNA. This technique eliminates the need for library screening to identify SSR-containing clones and provides an ~25-fold increase in sequencing throughput compared to traditional methods. STMP generates short but characteristic nucleotide sequence tags for fragments that are present within a pool of SSR amplicons. These tags are then ligated together to form concatemers for cloning and sequencing. The analysis of thousands of tags gives rise to a representational profile of the abundance and frequency of SSRs within the DNA pool, from which low copy sequences can be identified. As each tag contains sufficient nucleotide sequence for primer design, their conversion into PCR primers allows the amplification of corresponding full-length fragments from the pool of SSR amplicons. These fragments permit the full characterisation of a SSR locus and provide flanking sequence for the development of a microsatellite marker. Alternatively, sequence tag primers can be used to directly amplify corresponding SSR loci from genomic DNA, thereby reducing the cost of developing a microsatellite marker to the synthesis of just one sequence-specific primer. We demonstrate the utility of STMP by the development of SSR markers in bread wheat.     

Conservation of (GA)n microsatellite loci between Quercus species

Microsatellite (simple sequence repeat, SSR) amplification was performed in eight different members of the Fagaceae family by using sets of primers developed from sessile oak, Quercus petraea . In total, 136 cases of heterologous amplification were carried out, and 66% resulted in interpretable amplification products. From these, 12 PCR amplification products were sequenced and all 12 contained a sequence homologous to the original locus from Q. petraea . Although SSR primers worked even across different genera, with increasing evolutionary distance there was a clear tendency for decreasing ability to successfully amplify loci and a decreasing proportion of polymorphism amongst those markers which could be amplified. Two of the loci, ssrQpZAG46 and ssrQpZAG110, were polymorphic in all Quercus species tested. Only at one locus, ssrQpZAG58, a specific PCR product could be amplified in all species analysed. For four loci found in two species, we observed significant interspecies differences in the size range of the amplified alleles. Sequence analysis of two alleles showed that the size differences are not only due to variations in the number of (GA) repeats but also to an insertion of approximately 80 nucleotides in the flanking region. Our findings prove the usefulness of SSR markers within and amongst closely related genera of plants.     

Selection of highly informative and user-friendly microsatellites (SSRs) for genotyping of cultivated potato

Characterization of nearly 1,000 cultivated potato accessions with simple sequence repeats (SSRs; also referred to as microsatellites) has allowed the identification of a reference set of SSR markers for accurate and efficient genotyping. In addition, 31 SSRs are reported here for a potato genetic map, including new map locations for 24 of them. A first criterion for this proposed reference set was ubiquity of the SSRs in the eight landrace cultivar groups of the potato, Solanum tuberosum. All SSRs tested in the present study displayed the same allele phenotypes and allele size range in the diverse germplasm set as in the advanced potato cultivar germplasm in which they were originally discovered. Thirteen of 13 SSR products from all cultivar groups are shown to cross-hybridize with the corresponding SSR product of the source cultivar to ascertain sequence homology. Other important SSR selection criteria are quality of amplification products, locus complexity, polymorphic index content, and well-dispersed location on a potato genetic map. Screening of 156 SSRs allowed the identification of a highly informative and user-friendly set comprising 18 SSR markers for use in characterization of potato genetic resources. In addition, we have identified true- and pseudo-multiplexing SSRs for even greater efficiency.Communicated by F. Salamini     

An SSR-based genetic linkage map for perennial ryegrass (<Emphasis Type="Italic">Lolium perenne</Emphasis> L.)

A simple sequence repeat (SSR)-based linkage map has been constructed for perennial ryegrass (Lolium perenne L.) using a one-way pseudo-testcross reference population. A total of 309 unique perennial ryegrass SSR (LPSSR) primer pairs showing efficient amplification were evaluated for genetic polymorphism, with 31% detecting segregating alleles. Ninety-three loci have been assigned to positions on seven linkage groups. The majority of the mapped loci are derived from cloned sequences containing (CA)_n-type dinucleotide SSR arrays. A small number (7%) of primer pairs amplified fragments that mapped to more than one locus. The SSR locus data has been integrated with selected data for RFLP, AFLP and other loci mapped in the same population to produce a composite map containing 258 loci. The SSR loci cover 54% of the genetic map and show significant clustering around putative centromeric regions. BLASTN and BLASTX analysis of the sequences flanking mapped SSRs indicated that a majority (84%) are derived from non-genic sequences, with a small proportion corresponding to either known repetitive DNA sequence families or predicted genes. The mapped LPSSR loci provide the basis for linkage group assignment across multiple mapping populations.     

Identification of simple sequence repeats (SSRs) in olive ( Olea europaea L.)

A small insert genomic library of Olea europaea L., highly enriched in (GA/CT)n repeats, was obtained using the procedure of Kandpal et al. (1994). The sequencing of 103 clones randomly extracted from this library allowed the identification of 56 unique genomic inserts containing simple sequence repeat regions made by at least three single repeats. A sample of 20 primer pairs out of the 42 available were tested for functionality using the six olive varieties whose DNA served for library construction. All primer pairs succeeded in amplifying at least one product from the six DNA samples, and ten pairs detecting more than one allele were used for the genetic characterisation of a panel of 20 olive accessions belonging to 16 distinct varieties. A total of 57 alleles were detected among the 20 genotypes at the ten polymorphic SSR loci. The remaining primer pair allowed the amplification of a single SSR allele for all accessions plus a longer fragment for some genotypes. Considering the simple sequence repeat polymorphism, 5.7 alleles were scored on average for each of the ten SSR loci. A genetic dissimilarity matrix, based on the proportion of shared alleles among all the pair-wise combinations of genotypes, was constructed and used to disentangle the genetic relationships among varieties by means of the UPGMA clustering algorithm. Graphical representation of the results showed the presence of two distinct clusters of varieties. The first cluster grouped the varieties cultivated on the Ionian Sea coasts. The second cluster showed two subdivisions: the first sub-cluster agglomerated the varieties from some inland areas of Calabria; the second grouped the remaining varieties from Basilicata and Apulia cultivated in nearby areas. Results of cluster analysis showed a significant relationship between the multilocus genetic similarities and the geographic origin of the cultivars. Received: 2 February 2001 / Accepted: 1 June 2001     

Development, characterization, and cross-species/genera transferability of SSR markers for rubber tree (Hevea brasiliensis)

Genomic simple sequence repeat (SSR) markers are particularly valuable in studies of genetic diversity, evolution, genetic linkage map construction, quantitative trait loci tagging, and marker-assisted selection because of their multi-allelic nature, reproducibility, co-dominant inheritance, high abundance, and extensive genome coverage. The traditional methods of SSR marker development, such as genomic-SSR hybrid screening and microsatellite enrichment, have the disadvantages of high cost and complex operation. The selectively amplified microsatellite method is less costly and highly efficient as well as being simple and convenient. In this study, 252 sequences with SSRs were cloned from the rubber tree (Hevea brasiliensis) genome from which 258 SSR loci were obtained. The average repeat number was six. There were only 10 (3.9%) mononucleotide, trinucleotide, and pentanucleotide repeats, whereas the remaining 248 (96.1%) were dinucleotide repeats, including 128 (49.6%) GT/CA repeats, 118 (45.7%) GA/CT repeats, and 2 (0.8%) AT/TA repeats. A total of 126 primer pairs (see ESM) were successfully designed of which 36 primer pairs generated polymorphic products from 12 accessions of the cultivated species, 4 related species, and 3 species of the family Euphorbiaceae. In addition, investigations based on four genomic SSRs (GAR4, ACR22, CTR25, and GTR28) by cloning and sequencing provided evidence for cross-species/genera applicability, and homologous sequences were obtained from the rubber tree and Euphorbiaceae. Further analysis about the variation of the flanking regions of the four markers was carried out.     

亚麻EST-SSR信息分析与标记开发

与基因组SSR相比,以EST为基础的EST-SSR分子标记具有自身的优点。本研究从11240条亚麻（Linum sitatissmum L.）EST序列中检索出877条含有SSR的序列,其出现频率为7.8%。其中以三核苷酸重复出现的频率最高,占总SSR序列的60.1%;其次是二核苷酸重复,占21.9%;四、五和六核苷酸重复占18%。根据这些含SSR的EST序列共设计了73对SSR引物,在8份亚麻材料间通过PCR扩增检测,有63对引物扩增出清晰条带,引物可用率86.3%;有17对引物在8份亚麻材料间显现出多态性,占可扩增引物的26.3%。