Reduced-bond tight-binding inhibitors of HIV-1 protease. Fine tuning of the enzyme subsite specificity.

Truncation of a peptide substrate in the N-terminus and replacement of its scissile amide bond with a non-cleavable reduced bond results in a potent inhibitor of HIV-1 protease. A series of such inhibitors has been synthesized, and S2-S3' subsites of the protease binding cleft mapped. The S2 pocket requires bulky Boc or PIV groups, large aromatic Phe residues are preferred in P1 and P1' and Glu in P2'. The S3' pocket prefers Phe over small Ala or Val. Introduction of a Glu residue into the P2' position yields a tight-binding inhibitor of HIV-1 protease, Boc-Phe-[CH2-NH]-Phe-Glu-Phe-OMe, with a subnanomolar inhibition constant. The relevant peptide derived from the same amino acid sequence binds to the protease with a Ki of 110 nM, thus still demonstrating a good fit of the amino acid residues into the protease binding pockets and also the importance of the flexibility of P1-P1' linkage for proper binding. A new type of peptide bond mimetic, N-hydroxylamine -CH2-N(OH)-, has been synthesized. Binding of hydroxylamino inhibitor of HIV-1 protease is further improved with respect to reduced-bond inhibitor.     

Crystal structure of chemically synthesized HIV-1 protease and a ketomethylene isostere inhibitor based on the p2/NC cleavage site

Here we report the X-ray structures of chemically synthesized HIV-1 protease and the inactive [D25N]HIV-1 protease complexed with the ketomethylene isostere inhibitor Ac-Thr-Ile-Nle psi[CO-CH(2)]Nle-Gln-Arg.amide at 1.4 and 1.8A resolution, respectively. In complex with the active enzyme, the keto-group was found to be converted into the hydrated gem-diol, while the structure of the complex with the inactive D25N enzyme revealed an intact keto-group. These data support the general acid-general base mechanism for HIV-1 protease catalysis.     

Reprint of "Crystal structure of chemically synthesized HIV-1 protease and a ketomethylene isostere inhibitor based on the p2/NC cleavage site" [Bioorg. Med. Chem. Lett. 18 (2008) 4554-4557

Here we report the X-ray structures of chemically synthesized HIV-1 protease and the inactive [D25N]HIV-1 protease complexed with the ketomethylene isostere inhibitor Ac-Thr-Ile-Nlepsi[CO-CH(2)]Nle-Gln-Arg.amide at 1.4 and 1.8A resolution, respectively. In complex with the active enzyme, the keto-group was found to be converted into the hydrated gem-diol, while the structure of the complex with the inactive D25N enzyme revealed an intact keto-group. These data support the general acid-general base mechanism for HIV-1 protease catalysis.     

Could angiotensin I be produced from a renin substrate by the HIV-1 protease?

The standard angiotensin I (Ang I) radioimmunoassay for renin activity determination is a useful clinical tool for the diagnosis of high renin levels in certain cases of hypertension. It depends upon the liberation of Ang I from human plasma angiotensinogen. We considered whether a commercially available synthetic tetradecapeptide (TDP), Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Val-Tyr-Ser, would produce authentic Ang I upon incubation with protease from human immunodeficiency virus type 1 (HIV-1). This peptide is also known to be cleaved by renin at the Leu-Leu bond to yield the decapeptide Ang I. When the TDP is incubated with the HIV-1 protease, the peptide is readily hydrolyzed. Product formation is linear with respect to time and enzyme concentration. HPLC analysis of reaction products showed two new peaks, as one would expect from the cleavage of a TDP into a decapeptide and a tetrapeptide. Amino acid analysis of HPLC-purified peaks confirmed that the HIV-1 protease cleaves TDP at the Leu10-Leu11 site to produce the desired decapeptide, Ang I. Production of Ang I by the HIV-1 protease, like human renin, is inhibited in the presence of a protease inhibitor. Implications of the discovery of an HIV-1 protease substrate that produces authentic Ang I are discussed in light of a screening assay for soluble HIV-1 protease inhibitors.     

Molecular basis for the relative substrate specificity of human immunodeficiency virus type 1 and feline immunodeficiency virus proteases

We have used a random hexamer phage library to delineate similarities and differences between the substrate specificities of human immunodeficiency virus type 1 (HIV-1) and feline immunodeficiency virus (FIV) proteases (PRs). Peptide sequences were identified that were specifically cleaved by each protease, as well as sequences cleaved equally well by both enzymes. Based on amino acid distinctions within the P3-P3' region of substrates that appeared to correlate with these cleavage specificities, we prepared a series of synthetic peptides within the framework of a peptide sequence cleaved with essentially the same efficiency by both HIV-1 and FIV PRs, Ac-KSGVF/VVNGLVK-NH(2) (arrow denotes cleavage site). We used the resultant peptide set to assess the influence of specific amino acid substitutions on the cleavage characteristics of the two proteases. The findings show that when Asn is substituted for Val at the P2 position, HIV-1 PR cleaves the substrate at a much greater rate than does FIV PR. Likewise, Glu or Gln substituted for Val at the P2' position also yields peptides specifically susceptible to HIV-1 PR. In contrast, when Ser is substituted for Val at P1', FIV PR cleaves the substrate at a much higher rate than does HIV-1 PR. In addition, Asn or Gln at the P1 position, in combination with an appropriate P3 amino acid, Arg, also strongly favors cleavage by FIV PR over HIV PR. Structural analysis identified several protease residues likely to dictate the observed specificity differences. Interestingly, HIV PR Asp30 (Ile-35 in FIV PR), which influences specificity at the S2 and S2' subsites, and HIV-1 PR Pro-81 and Val-82 (Ile-98 and Gln-99 in FIV PR), which influence specificity at the S1 and S1' subsites, are residues which are often involved in development of drug resistance in HIV-1 protease. The peptide substrate KSGVF/VVNGK, cleaved by both PRs, was used as a template for the design of a reduced amide inhibitor, Ac-GSGVF Psi(CH(2)NH)VVNGL-NH(2.) This compound inhibited both FIV and HIV-1 PRs with approximately equal efficiency. These findings establish a molecular basis for distinctions in substrate specificity between human and feline lentivirus PRs and offer a framework for development of efficient broad-based inhibitors.     

Substrate analog inhibitors of HIV-1 protease containing phenylnorstatine as a transition state element

Substrates of HIV-1 protease are classified into three groups (A, B and C) based on the amino acid residues present at P1' and P2' sites. Replacement of the scissile amide bond by phenylnorstatine in representative substrate analog sequences from class A, B and C, yielded inhibitors of HIV-1 protease. Of the twelve inhibitors synthesized in this series, class C substrate analog inhibitors are more potent inhibitors (Ki's 3.3-24 microM) than either class A or class B inhibitors. In this series of inhibitors, the (2S,3S) isomer of phenylnorstatine is preferred over the other isomers as a "transition state element" for design of inhibitors of HIV-1 protease.     

Insights from atomic-resolution X-ray structures of chemically synthesized HIV-1 protease in complex with inhibitors

The human immunodeficiency virus 1 (HIV-1) protease (PR) is an aspartyl protease essential for HIV-1 viral infectivity. HIV-1 PR has one catalytic site formed by the homodimeric enzyme. We chemically synthesized fully active HIV-1 PR using modern ligation methods. When complexed with the classic substrate-derived inhibitors JG-365 and MVT-101, the synthetic HIV-1 PR formed crystals that diffracted to 1.04- and 1.2-A resolution, respectively. These atomic-resolution structures revealed additional structural details of the HIV-1 PR's interactions with its active site ligands. Heptapeptide inhibitor JG-365, which has a hydroxyethylamine moiety in place of the scissile bond, binds in two equivalent antiparallel orientations within the catalytic groove, whereas the reduced isostere hexapeptide MVT-101 binds in a single orientation. When JG-365 was converted into the natural peptide substrate for molecular dynamic simulations, we found putative catalytically competent reactant states for both lytic water and direct nucleophilic attack mechanisms. Moreover, free energy perturbation calculations indicated that the insertion of catalytic water into the catalytic site is an energetically favorable process.     

Proteolysis of an active site peptide of lactate dehydrogenase by human immunodeficiency virus type 1 protease.

The muscle and heart lactate dehydrogenase (LDHs) of rabbit and pig are specifically cleaved at a single position by HIV-1 protease, resulting in the conversion of 36-kDa subunits of the oligomeric enzymes into 21- and 15-kDa protein bands as analyzed by SDS-PAGE. While the proteolysis was observed at neutral pH, it became more pronounced at pH 6.0 and 5.0. The time courses of the cleavage of the 36-kDa subunits were commensurate with the time-dependent loss of both quaternary structure and enzymatic activity. These results demonstrated that deoligomerization of rabbit muscle LDH at acidic pH rendered its subunits more susceptible to proteolysis, suggesting that a partially denatured form of the enzyme was the actual substrate. Proteolytic cleavage of the rabbit muscle enzyme occurred at a decapeptide sequence, His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp (scissile bond denoted throughout by an asterisk), which constitutes a "strand-loop" element in the muscle and heart LDH structures and contains the active site histidyl residue His-193. The kinetic parameters Km, Vmax/KmEt, and Vmax/Et for rabbit muscle LDH and the synthetic decapeptide Ac-His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp-NH2 were nearly identical, suggesting that the decapeptide within the protein substrate is conformationally mobile, as would be expected for the peptide substrate in solution. Insertion of part of this decapeptide sequence into bacterial galactokinase likewise rendered this protein susceptible to proteolysis by HIV-1 protease, and site-directed mutagenesis of this peptide in galactokinase revealed that the Glu residue at the P2' was important to binding to HIV-1 protease. Crystallographic analysis of HIV-1 protease complexed with a tight-binding peptide analogue inhibitor derived from this decapeptide sequence revealed that the "strand-loop" structure of the protein substrate must adopt a beta-sheet structure upon binding to the protease. The Glu residue in the P2' position of the inhibitor likely forms hydrogen-bonding interactions with both the alpha-amide and gamma-carboxylic groups of Asp-30 in the substrate binding site.     

Affinity purification of the HIV-1 protease

An inhibitor of the HIV-1 protease has been employed in the generation of a resin which allows the rapid purification of this enzyme. A peptide substrate analogue, H2N-Ser-Gln-Asn-(Phe-psi[CH2N]-Pro)-Ile-Val-Gln-OH, was coupled to agarose resin. The HIV-1 protease was expressed in E. coli and the supernatant from lysed cells was passed through the affinity resin. Active HIV-1 protease was then eluted with a buffer change to pH 10 and 2 M NaCl. Final purification to a homogeneous preparation, capable of crystallization, was achieved with hydrophobic interaction chromatography. Solutions containing HIV-1 protease bound to competitive inhibitors do not bind to the column.     

Facile incorporation of urea pseudopeptides into protease substrate analogue inhibitors

A new procedure that employs a one-pot, oxidative Hofmann rearrangement to incorporate a urea linkage into peptide backbones is detailed herein. This methodology was used to replace the scissile peptide bonds of [Leu5]enkephalin and a hexapeptide HIV-1 protease substrate. The [Leu5]enkephalin analogue was found to inhibit cleavage of hippurylhistidylleucine (HHL) by porcine kidney angiotensin-converting enzyme (PK-ACE) with a 0.88 mM IC50 value, comparable to the Michaelis constant of [Leu5]enkephalin with the same enzyme. The HIV-1 protease substrate analogue was shown to inhibit HIV-1 protease with an IC50=34 microM.     

Comparison of inhibitor binding in HIV-1 protease and in non-viral aspartic proteases: the role of the flap

The crystal structure of HIV-1 protease with an inhibitor has been compared with the structures of non-viral aspartic proteases complexed with inhibitors. In the dimeric HIV-1 protease, two 4-stranded beta-sheets are formed by half of the inhibitor, residues 27-29, and the flap from each monomer. In the monomeric non-viral enzyme the single flap does not form a beta-sheet with an inhibitor. The HIV-1 protease shows more interactions with a longer peptide inhibitor than are observed in non-viral aspartic protease-inhibitor complexes. This, and the large movement of the flaps, restricts the conformation of the protease cleavage sites in the retroviral polyprotein precursor.     

Computational design and experimental study of tighter binding peptides to an inactivated mutant of HIV-1 protease

Drug resistance in HIV-1 protease, a barrier to effective treatment, is generally caused by mutations in the enzyme that disrupt inhibitor binding but still allow for substrate processing. Structural studies with mutant, inactive enzyme, have provided detailed information regarding how the substrates bind to the protease yet avoid resistance mutations; insights obtained inform the development of next generation therapeutics. Although structures have been obtained of complexes between substrate peptide and inactivated (D25N) protease, thermodynamic studies of peptide binding have been challenging due to low affinity. Peptides that bind tighter to the inactivated protease than the natural substrates would be valuable for thermodynamic studies as well as to explore whether the structural envelope observed for substrate peptides is a function of weak binding. Here, two computational methods-namely, charge optimization and protein design-were applied to identify peptide sequences predicted to have higher binding affinity to the inactivated protease, starting from an RT-RH derived substrate peptide. Of the candidate designed peptides, three were tested for binding with isothermal titration calorimetry, with one, containing a single threonine to valine substitution, measured to have more than a 10-fold improvement over the tightest binding natural substrate. Crystal structures were also obtained for the same three designed peptide complexes; they show good agreement with computational prediction. Thermodynamic studies show that binding is entropically driven, more so for designed affinity enhanced variants than for the starting substrate. Structural studies show strong similarities between natural and tighter-binding designed peptide complexes, which may have implications in understanding the molecular mechanisms of drug resistance in HIV-1 protease.     

A cleavage enzyme-cytometric bead array provides biochemical profiling of resistance mutations in HIV-1 Gag and protease

Most protease-substrate assays rely on short, synthetic peptide substrates consisting of native or modified cleavage sequences. These assays are inadequate for interrogating the contribution of native substrate structure distal to a cleavage site that influences enzymatic cleavage or for inhibitor screening of native substrates. Recent evidence from HIV-1 isolates obtained from individuals resistant to protease inhibitors has demonstrated that mutations distal to or surrounding the protease cleavage sites in the Gag substrate contribute to inhibitor resistance. We have developed a protease-substrate cleavage assay, termed the cleavage enzyme- cytometric bead array (CE-CBA), which relies on native domains of the Gag substrate containing embedded cleavage sites. The Gag substrate is expressed as a fluorescent reporter fusion protein, and substrate cleavage can be followed through the loss of fluorescence utilizing flow cytometry. The CE-CBA allows precise determination of alterations in protease catalytic efficiency (k(cat)/K(M)) imparted by protease inhibitor resistance mutations in protease and/or gag in cleavage or noncleavage site locations in the Gag substrate. We show that the CE-CBA platform can identify HIV-1 protease present in cellular extractions and facilitates the identification of small molecule inhibitors of protease or its substrate Gag. Moreover, the CE-CBA can be readily adapted to any enzyme-substrate pair and can be utilized to rapidly provide assessment of catalytic efficiency as well as systematically screen for inhibitors of enzymatic processing of substrate.     

Microbore liquid chromatography coupled to a flow fast atom bombardment probe for the on-line detection of the Tyr-Pro cleavage of a nonapeptide by recombinant HIV-1 protease

The nonapeptide Val-Ser-Gln-Asn-Tyr-Pro-Ile-Val-Gln has been reported as a model substrate for an aspartyl protease produced by the human immunodeficiency virus (HIV-1). Cleavage of this peptide at the Tyr-Pro linkage to produce tetra- and pentapeptide fragments is the basis of high-performance liquid chromatographic assays to detect HIV-1 protease activity. Confirmation of the cleavage site has been proved by using microbore liquid chromatography coupled to a dynamic fast atom bombardment interface. Comparison with fortified control incubates indicates that an approximate stoichiometric amount of the tetrapeptide was formed from the nonapeptide, confirming that the cleavage of the substrate by HIV-1 protease is both specific and quantitative.     

Crucial amides for dimerization inhibitors of HIV-1 protease

An inhibitor based on crosslinked peptides from the interfacial region of HIV-1 protease, previously shown to act by dimerization inhibition, was modified by N-methylation to ascertain the importance of the amide hydrogens on inhibition. The effects of N-methylation on HIV-1 protease inhibition, as well as the effects on degradation by proteases are described.     

An ultrasensitive human immunodeficiency virus type 1 protease radioimmuno rate assay with a potential for monitoring blood levels of protease inhibitors in acquired immunodeficiency disease syndrome patients.

The angiotensin I-based peptide Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Glu-Glu-Ser yields angiotensin I (Ang I) and Leu-Glu-Glu-Ser upon hydrolysis by the human immunodeficiency virus type 1 (HIV-1) protease, but not by human renin. N-terminal sequencing of the reaction products showed that the HIV-1 protease cleaved exclusively at the Leu-Leu bond. The rate of Ang I formation can be measured by a radioimmunoassay, since the parent peptide has minimal cross reactivity in this assay. The rate of enzymatic hydrolysis is maximal at pH 4.5-5.0 and at an ionic strength of 1 M. At 37 degrees C, 0.1 M Na acetate buffer, pH 5.0, 1 M NaCl, 10% glycerol, 5% ethylene glycol, 1 mg/ml bovine serum albumin, and 3 mM EDTA, the reaction obeys Michaelis-Menten type kinetics with Km = 17.2 +/- 3.5 microM and kcat = 2.30 +/- 0.33 min-1. The activity assay readily quantitates as little as 0.25 nM of HIV-1 protease. The production of Ang I by the HIV-1 protease is inhibited in the presence of a HIV-1 protease inhibitor. The newly discovered substrate is relatively insensitive to human or monkey serum. Therefore, the effect of sera from 20 patients with advanced acquired immunodeficiency disease syndrome (AIDS) on Ang I production in the above assay system was examined. Results of this study indicate that it may be possible to adapt the above Ang I-based system to determine blood levels of HIV-1 protease inhibitors in AIDS patients during clinical trials.     

Narrow substrate specificity and sensitivity toward ligand-binding site mutations of human T-cell Leukemia virus type 1 protease

Human T-cell leukemia virus type 1 (HTLV-1) is associated with a number of human diseases; therefore, its protease is a potential target for chemotherapy. To compare the specificity of HTLV-1 protease with that of human immunodeficiency virus type 1 (HIV-1) protease, oligopeptides representing naturally occurring cleavage sites in various retroviruses were tested. The number of hydrolyzed peptides as well as the specificity constants suggested a substantially broader specificity of the HIV protease. Amino acid residues of HTLV-1 protease substrate-binding sites were replaced by equivalent ones of HIV-1 protease. Most of the single and multiple mutants had altered specificity and a dramatically reduced folding and catalytic capability, suggesting that mutations are not well tolerated in HTLV-1 protease. The catalytically most efficient mutant was that with the flap residues of HIV-1 protease. The inhibition profile of the mutants was also determined for five inhibitors used in clinical practice and inhibitor analogs of HTLV-1 cleavage sites. Except for indinavir, the HIV-1 protease inhibitors did not inhibit wild type and most of the mutant HTLV-1 proteases. The wild type HTLV-1 protease was inhibited by the reduced peptide bond-containing substrate analogs, whereas the mutants showed various degrees of weakened binding capability. Most interesting, the enzyme with HIV-1-like residues in the flap region was the most sensitive to the HIV-1 protease inhibitors and least sensitive to the HTLV-1 protease inhibitors, indicating that the flap plays an important role in defining the specificity differences of retroviral proteases.     

Mechanism of inhibition of the retroviral protease by a Rous sarcoma virus peptide substrate representing the cleavage site between the gag p2 and p10 proteins.

The activity of the avian myeloblastosis virus (AMV) or the human immunodeficiency virus type 1 (HIV-1) protease on peptide substrates which represent cleavage sites found in the gag and gag-pol polyproteins of Rous sarcoma virus (RSV) and HIV-1 has been analyzed. Each protease efficiently processed cleavage site substrates found in their cognate polyprotein precursors. Additionally, in some instances heterologous activity was detected. The catalytic efficiency of the RSV protease on cognate substrates varied by as much as 30-fold. The least efficiently processed substrate, p2-p10, represents the cleavage site between the RSV p2 and p10 proteins. This peptide was inhibitory to the AMV as well as the HIV-1 and HIV-2 protease cleavage of other substrate peptides with Ki values in the 5-20 microM range. Molecular modeling of the RSV protease with the p2-p10 peptide docked in the substrate binding pocket and analysis of a series of single-amino acid-substituted p2-p10 peptide analogues suggested that this peptide is inhibitory because of the potential of a serine residue in the P1' position to interact with one of the catalytic aspartic acid residues. To open the binding pocket and allow rotational freedom for the serine in P1', there is a further requirement for either a glycine or a polar residue in P2' and/or a large amino acid residue in P3'. The amino acid residues in P1-P4 provide interactions for tight binding of the peptide in the substrate binding pocket.     

Mechanism of aspartyl proteinase action. VII. Noncovalent complexes of HIV-1 aspartyl proteinase with substrate and substrate-like inhibitors

A computer model of a noncovalent complex of HIV-1 aspartyl protease with substrate-like inhibitor JG-365 was a priori constructed by using the approaches of theoretical conformational analysis and molecular mechanics. The root mean square deviation of the calculated conformation of the inhibitor from the X-ray diffraction analysis data was 0.87 A. These results enabled the a priori calculation of the structure of noncovalent complex of HIV-1 protease with a hexapeptide fragment of its native specific substrate Ser-Gln-Asn-Tyr-Pro-Ile-Val. The only possible orientation of the cleavable peptide bond in this and the nucleophilic water molecule relative to the catalytically active Asp residues of the enzyme (Asp25 and Asp125) was found that provides for the chemical transformation of the substrate to a tetrahedral intermediate. An action mechanism of enzymes of this class was proposed on the basis of the analysis of calculated distances. We showed that neither steric distortion of the cleavable bond nor the formation of unfavorable contacts in molecules of the enzymes and their substrates accompany the optimum orientation of substrate molecules at the active sites of HIV-1 aspartyl proteases and rhizopuspepsin.