P1 plasmid replication. Role of initiator titration in copy number control

The copy number control locus incA of unit copy plasmid P1 maps in a region containing nine 19 base-pair repeats. Previous results from studies in vivo and in vitro indicated that incA interacts with the plasmid-encoded RepA protein, which is essential for replication. It has been proposed that the repeat sequences negatively control copy number by sequestering the RepA protein, which is rate-limiting for replication. Our results lend further support to this hypothesis. Here we show that the repeats can be deleted completely from P1 miniplasmids and the deletion results in an approximately eightfold increase in plasmid copy number. So, incA sequences are totally dispensable for replication and have only a regulatory role. The copy number of incA-deleted plasmids can be reduced if incA sequences are present in trans or are reincorporated at two different positions in the plasmid. This reduction in copy number is not due to lowered expression of the repA gene in the presence of incA. We show that one repeat sequence is sufficient to bind RepA and can reduce the copy number of incA-deleted plasmids. When part of the repeat was deleted, it lost its ability to bind as well as influence copy number. These results show a strong correlation between the capacity of incA repeats to bind RepA protein both in vivo and in vitro, and the function of incA in the control of copy number.     

Trans- and cis-acting elements for the replication of P1 miniplasmids

Replication-deficient mutants of the unit-copy miniplasmid lambda-P1:5R were isolated after hydroxylamine mutagenesis. Complementation tests showed that the majority of these mutants are defective in the production of the repA protein product. Two of these mutants have suppressible nonsense (amber) mutations. The DNA sequence of one of these, repA103, has been determined. The lesion lies within the repA open reading frame, showing that the repA product is essential for plasmid replication. Complementation of deletion mutants of lambda-P1:5R by repA protein showed that the origin of replication lies to the left of repA and that this 300-base-pair origin region is the only portion of the DNA essential for plasmid replication if repA protein is supplied in trans. Six of the 21 hydroxylamine-induced mutants were not complemented by repA. Replication of three of these could be restored by introduction into the plasmid of a wild-type origin region, suggesting that they were origin-defective. The DNA sequence of two mutants was determined. Mutant rep-11 has a 43-base-pair deletion within the incC sequence (incC is a series of five direct repeats of a 19-base-pair sequence known to be involved in the regulation of plasmid replication). The deletion appears to have been generated by homologous recombination between two repeats. Mutant rep-30 has a single base substitution in a region just to the left of incC that destroys one of five G-A-T-C (dam methylation) sites in this region. As lambda-P1:5R is unable to establish itself as a plasmid in a methylase-defective (dam-) strain, it seems probable that methylation of the G-A-T-C sequences is important for origin function. The incC region and the sequences to its left appear to constitute an essential part of the origin of replication.     

Genetic and functional analysis of the basic replicon of pPS10, a plasmid specific for Pseudomonas isolated from Pseudomonas syringae patovar savastanoi.

The sequence of a 1823 base-pair region containing the replication functions of pPS10, a narrow host-range plasmid isolated from a strain of Pseudomonas savastanoi, is reported. The origin of replication, oriV, or pPS10 is contained in a 535 base-pair fragment of this sequence that can replicate in the presence of trans-acting function(s) of the plasmid. oriV contains four iterons of 22 base-pairs that are preceded by G+C-rich and A+T-rich regions. A dnaA box located adjacent to the repeats of the origin is dispensable but required for efficient replication of pPS10; A and T are equivalent bases at the 5' end of the box. repA, the gene of a trans-acting replication protein of 26,700 Mr has been identified by genetic and functional analysis. repA is adjacent to the origin of replication and is preceded by the consensus sequences of a typical sigma 70 promoter of Escherichia coli. The RepA protein has been identified, using the minicell system of E. coli, as a polypeptide with an apparent molecular mass of 26,000. A minimal pPS10 replicon has been defined to a continuous 1267 base-pair region of pPS10 that includes the oriV and repA sequences.     

P1 plasmid replication: initiator sequestration is inadequate to explain control by initiator-binding sites.

The unit-copy plasmid replicon mini-P1 consists of an origin, a gene for an initiator protein, RepA, and a control locus, incA. Both the origin and the incA locus contain repeat sequences that bind RepA. It has been proposed that the incA repeats control replication by sequestering the rate-limiting RepA initiator protein. Here we show that when the concentration of RepA was increased about fourfold beyond its normal physiological level from an inducible source in trans, the copy number of a plasmid carrying the P1 origin increased about eightfold. However, when the origin and a single copy of incA were present in the same plasmid, the copy number did not even double. The failure of an increased supply of RepA to overcome the inhibitory activity of incA is inconsistent with the hypothesis that incA inhibits replications solely by sequestering RepA. We propose that incA, in addition to sequestration, can also restrain replication by causing steric hindrance to the origin function. Our proposal is based on the observation that incA can bind to a RepA-origin complex in vitro.     

Essential DNA sequence for the replication of Rts1.

The promoter sequence of the mini-Rts1 repA gene encoding the 33,000-dalton RepA protein that is essential for replication was defined by RNA polymerase protection experiments and by analyzing RepA protein synthesized in maxicells harboring mini-Rts1 derivatives deleted upstream of or within the presumptive promoter region. The -10 region of the promoter which shows homology to the incII repeat sequences overlaps two inverted repeats. One of the repeats forms a pair with a sequence in the -35 region, and the other forms a pair with the translation initiation region. The replication origin region, ori(Rts1), which was determined by supplying RepA protein in trans, was localized within 188 base pairs in a region containing three incII repeats and four GATC sequences. Dyad dnaA boxes that exist upstream from the GATC sequences appeared to be dispensable for the origin function, but deletion of both dnaA boxes from ori(Rts1) resulted in reduced replication frequency, suggesting that host-encoded DnaA protein is involved in the replication of Rts1 as a stimulatory element. Combination of the minimal repA and ori(Rts1) segments, even in the reverse orientation compared with the natural sequence, resulted in reconstitution of an autonomously replicating molecule.     

Partition of unit-copy miniplasmids to daughter cells. I. P1 and F miniplasmids contain discrete, interchangeable sequences sufficient to promote equipartition

Hybrids formed by insertion of the plasmid maintenance regions of P1 or F into a lambda delta att vector form stable unit-copy plasmids in their Escherichia coli host. They must therefore both be substrates for an accurate cellular partition apparatus that ensures that all daughter cells inherit a plasmid copy. Analysis of deletion mutants of both types of hybrid showed that, although the P1 and F plasmid maintenance regions differ in sequence and specificity, they are similar in general organization. Each contains an approximately 3 X 10(3) base-pair region that is essential for replication (rep) and an adjacent but separable 3 X 10(3) base-pair region that is essential for the stability of plasmid maintenance (par). Each par region is thought to specify the recognition of the plasmid as a substrate for equipartition. The deletion mutants provide sources of isolated rep and par sequences from both P1 and F DNA. These elements were then used to construct composite plasmids with novel combinations and arrangements of rep and par sequences. Heterologous constructions containing P1 rep and F par or F rep and P1 par sequences were maintained faithfully. We conclude that par regions are both necessary and sufficient to promote equipartition of replicating plasmid DNA. This activity is exerted only in cis but otherwise seems to be independent of the position or orientation of the par sequences within the DNA. Both P1 and F par regions include DNA sequences (incB of P1, incD of F) that we propose are analogues of the centromeres of eukaryotic chromosomes. The remaining portions of the par regions are known to encode protein products that, we believe, act at the inc sites. Extra copies of these inc sites appear to exert incompatibility by competition for the cellular partition apparatus.     

Minimal region necessary for autonomous replication of pTAR.

The native 44-kilobase-pair plasmid pTAR, discovered in a grapevine strain of Agrobacterium tumefaciens, contains a single origin of DNA replication confined to a 1.0-kilobase-pair region of the macromolecule. This region (ori) confers functions sufficient for replication in Agrobacterium and Rhizobium species but not in Pseudomonas solanacearum, Pseudomonas glumae, Pseudomonas syringae pv. savastanoi, Xanthomonas campestris pv. campestris, and Escherichia coli. ori contains a repA gene that encodes a 28,000-dalton protein required for replication. Nucleotide sequencing of repA and its promoter region revealed four 8-base-pair palindromic repeats upstream of the repA coding region. Deletion of these repeats alters repA expression and plasmid copy number. Downstream of repA are three additional repeats in a region essential for replication. A locus responsible for plasmid partitioning (parA) and a putative second locus regulating plasmid copy number are part of the origin region and are required for stable plasmid maintenance.     

Genetic and physical map of a P1 miniplasmid

The prophage form of bacteriophage P1 is a unit-copy plasmid which is maintained with great fidelity in its Escherichia coli host. The plasmid maintenance functions of P1 are clustered in one region of the genome. An 11.5-kilobase fragment from this region has been cloned into a lambda delta att vector and promotes stable unit-copy plasmid maintenance. The properties of the lambda vector facilitated the isolation of deletion mutants affecting the P1 DNA. Twenty-eight deletion mutants were isolated, and their lesions were mapped by physical techniques. The genetic properties of the mutants with respect to plasmid replication, stability of plasmid maintenance, and ability to exert incompatibility effects against P1 and P7 plasmids were determined. These properties, along with those of several subfragments of the P1 insert cloned into high-copy-number plasmid vectors, allow the construction of an unambiguous genetic and physical map of the maintenance functions. A region of less than 3 kilobases, the rep region, is essential for plasmid replication and contains the incA incompatibility determinant within an 800-base-pair segment. Immediately adjacent to rep is a second region of approximately 3 kilobases which is required for stable plasmid maintenance, but not replication. This region, par, contains a second incompatibility element incB which is approximately 1 kilobase in size. The par region appears to specify equipartition of plasmid copies to daughter cells during cell division.     

P1 plasmid replication. Purification and DNA-binding activity of the replication protein RepA

The minimal P1 replicon encompasses an open reading frame for the essential replication protein, RepA, bracketed by two sets of multiple 19-base pair repeated sequences, incA and incC. This study focused on the interaction of RepA with the incC and incA repeated sequences because earlier studies suggested that incA might control P1 copy number by titrating limiting amounts of RepA and because the incC repeats, which are part of the origin of replication, contain the promoter for repA. RepA is essential for origin function, autoregulates its own synthesis from the promoter, and, when overproduced, blocks origin function. In this study, RepA was overproduced from an expression vector and purified to 90% homogeneity. The binding of RepA to the DNA encompassing repeat sequences was assayed by monitoring the mobility of protein-DNA complexes on polyacrylamide gels. Distinct species of retarded bands were seen with the maximum number of bands corresponding to the number of repeats present in the target fragment. No evidence was found for RepA binding to fragments not containing the repeats. This suggests that the specific binding of RepA to the repeats may be involved in each of the diverse activities of RepA.     

Nucleotide sequence analysis of RepFIC, a basic replicon present in IncFI plasmids P307 and F, and its relation to the RepA replicon of IncFII plasmids.

RepFIC is a basic replicon of IncFI plasmid P307 which is located within a 3.09-kilobase SmaI fragment. The nucleotide sequence of this region has been determined and shown to be homologous with the RepFIIA replicon of IncFII plasmids. The two replicons share three homologous regions, HRI, HRII, and HRIII, which are flanked by two nonhomologous regions, NHRI and NHRII. A comparison of coding regions reveals that the two replicons have several features in common. RepFIC, like RepFIIA, codes for a repA2 protein with its amino-terminal codons in HRI and its carboxy-terminal codons in NHRI. Although the codons for the repA1 proteins are located in NHRII, the DNA region containing a putative promoter, ribosomal binding site, and initiation codons is located in HRII. This region also codes for an inc RNA. There are nine base-pair differences between the inc RNA of RepFIIA and that of RepFIC, and as a result, RepFIC and RepFIIA replicons are compatible. An EcoRI fragment from the F plasmid which shows homology with RepFIC of P307 has also been sequenced. This fragment contains only a portion of RepFIC, including the genes for the putative repA2 protein and inc RNA. The region coding for a putative repA1 protein is interrupted by the transposon Tn1000 and shows no homology with the repA1 region of RepFIIA and RepFIC of P307. Our comparative and structural analyses suggest that RepFIC and RepFIIA, although different, have a similar replication mechanism and thus can be assigned to the same replicon family, which we designate the RepFIIA family.     

Nucleotide sequence, structural organization, and functional characterization of the small recombinant plasmid pOM1 that is specific for Francisella tularensis

pOM1 is a recombinant 4442-bp plasmid that includes the replicon of the Francisella novicida-like strain F6168 cryptic plasmid pFNL10 and the tetracycline resistance gene (tetC) of plasmid pBR328. pOM1 can stably replicate and is maintained in Francisella tularensis biovars tularensis, palaearctica, and palaearctica var. japonica. The replicon of pOM1 includes the ori region and the repA gene. The ori region, located upstream of the repA gene includes two sets of 31- and 13-bp direct repeats (DR), with AT-rich regions preceding each of the DRs. Two putative promoters of the repA gene were found connected with the DR regions. A 40-kDa protein was encoded by the repA gene and found essential for replication. Expression of the tetC gene is regulated by an Escherichia coli sigma(70)-like promoter and is dependent on the F. tularensis strain and its environment.     

Identification, characterization, and nucleotide sequence of a region of Enterococcus faecalis pheromone-responsive plasmid pAD1 capable of autonomous replication.

A 5-kbp region of pAD1, previously shown to be capable of supporting replication, copy control, and stable inheritance of the plasmid, was cloned into a replicon probe vector and subjected to transposon insertional mutagenesis. Transposon inserts identifying essential replication, copy control, and stability functions were isolated. Deletion of stability functions not essential for replication resulted in delimitation of a basic replicon. The complete DNA sequence of this approximately 3-kbp region and the precise positions of several transposon inserts were determined, and the phenotypic effects of the transposon inserts were correlated with the physical locations of individual determinants. The following three genes, apparently involved in plasmid maintenance, were identified; repA, which encodes a protein required for replication; repB, which encodes a protein involved in copy control; and repC, which may be involved in stable inheritance. In addition, two clusters of repeats composed of a consensus sequence, TAGTARRR, were identified, one located between the divergently transcribed repA and repB genes and another located downstream of repC. The region between repA and repB contained 25 repeats divided into two subregions of 13 and 12 repeats separated by 78 bp. The region located downstream of repC contained only three repeats but may be essential for plasmid replication, since deletion of this determinant resulted in loss of ability to replicate in Enterococcus faecalis. We hypothesize that the repeat units represent protein-binding sites required for assembly of the replisome and control of plasmid copy number. Another region of unrelated repeat units that may also be involved in replication is located within the repA gene. Possible mechanisms of action of these determinants are discussed.     

A single amino acid difference between Rep proteins of P1 and P7 affects plasmid copy number

P1 and P7 are closely related plasmid prophages which are members of the same incompatibility group. We report the complete DNA sequence of the replication region of P7 and compare it to that of P1. The sequence predicts a single amino acid difference between the RepA proteins of these two plasmids, no differences in methylation sites or regions where dnaA protein is expected to bind, and no difference in the spacing of the major features of the two replicons. A P1 replicon with a mutation in repA, the gene that encodes an essential replication protein, is complemented for replication by providing either the P1 RepA protein (RepA1) or the P7 RepA protein (RepA7) in trans. Furthermore, when either of these proteins is supplied in trans, the plasmid copy number of P1 cop mutants drops to that of P1 cop+. However, when RepA7 is supplied, the copy number of P1 cop and P1 cop+ is higher than that when RepA1 is supplied. This indicates that the single amino acid difference between the two versions of the RepA protein plays an important role in determining the plasmid copy number.     

The plasmid-maintenance functions of the P7 prophage

The region responsible for the maintenance of the prophage of bacteriophage P7 as a stable, unit-copy plasmid was isolated in a lambda att vector which lysogenizes Escherichia coli as a stable unit-copy plasmid under the control of the P7 replication origin. The P7 plasmid-maintenance region was shown to consist of adjacent replication and partition regions capable of functioning independently. The isolated replication region could support plasmid maintenance but the resulting plasmids were highly unstable unless the partition region was also included. Stable composite plasmids were isolated containing the putative P7 partition region and the origin of replication of the unrelated plasmid F, indicating that P7 encoded an active partition mechanism. The replication regions of P7 and P1 were shown to be highly homologous but the partition regions of the two plasmids appear to be unrelated in sequence. The incompatibility determinants associated with the two replication regions showed the same specificity, whereas the partition-region incompatibility determinants were different, showing no cross-specificity.     

Structure and function of the F plasmid genes essential for partitioning

The F plasmid in Escherichia coli has its own partition mechanism controlled by the sopA and sopB genes, and by the cis-acting sopC region. The DNA sequence of the entire partition region and its flanking regions is described here. Two large open reading frames coding for 43,700 Mr and 35,400 Mr proteins correspond to sopA and sopB, respectively. The sopB reading frame is located immediately downstream from the sopA reading frame. Twelve 43 base-pair direct repeats exist in the sopC region without any spacer regions, and one pair of seven base-pair inverted repeats exists in each of the direct repeats. Analysis of deletions in the sopC region showed that the direct repeats play an important role in plasmid partition and IncD incompatibility. IncG incompatibility is exhibited by pBR322 derivatives carrying the sopB gene alone. When compared with the partition genes parA and parB of plasmid P1, homology in amino acid sequence was found between the SopA protein of F and the ParA protein of P1, and also between SopB protein of F and ParB protein of P1. In addition, homology was found between Rep proteins of F and P1.     

Molecular and functional organization of yeast plasmid pSR1

The nucleotide sequence of a 6251 base-pair plasmid, pSR1, harbored in an osmophilic haploid yeast, Zygosaccharomyces rouxii (formerly Saccharomyces rouxii), was determined. No homology was detected between the sequences of pSR1 and 2-micron DNA of Saccharomyces cerevisiae. pSR1 has a pair of inverted repeats consisting of completely homologous 959 base-pair sequences, which separate two unique sequences 2654 base-pairs and 1679 base-pairs long. Each inverted repeat has an ARS sequence functional in both Z. rouxii and S. cerevisiae hosts. Short direct repeats or dyad symmetries were observed in the inverted repeats similar to those found close to the replication origin of 2-micron DNA. Three open reading frames, P, S and R, each able to encode a protein of molecular weight larger than 10,000, were found. Insertional inactivation of R gave rise to a defect in the intramolecular recombination at the inverted repeats, and that of S reduced the copy number of pSR1 in the S. cerevisiae host. The maintenance stability of the plasmid was also tested in the heterogeneous S. cerevisiae host, but the results of the insertional inactivation of P, S and R were ambiguous. pSR1 and 2-micron DNA were compatible in S. cerevisiae cells, but the protein factors encoded by these plasmids did not complement each other.