To twist or not to twist: From chromophore structure to dynamics inside engineered photoconvertible and photoswitchable fluorescent proteins

Green-to-red photoconvertible fluorescent proteins (FPs) are vital biomimetic tools for powerful techniques such as super-resolution imaging. A unique Kaede-type FP named the least evolved ancestor (LEA) enables delineation of the evolutionary step to acquire photoconversion capability from the ancestral green fluorescent protein (GFP). A key residue, Ala69, was identified through several steady-state and time-resolved spectroscopic techniques that allows LEA to effectively photoswitch and enhance the green-to-red photoconversion. However, the inner workings of this functional protein have remained elusive due to practical challenges of capturing the photoexcited chromophore motions in real time. Here, we implemented femtosecond stimulated Raman spectroscopy and transient absorption on LEA-A69T, aided by relevant crystal structures and control FPs, revealing that Thr69 promotes a stronger π–π stacking interaction between the chromophore phenolate (P-)ring and His193 in FP mutants that cannot photoconvert or photoswitch. Characteristic time constants of ~60–67 ps are attributed to P-ring twist as the onset for photoswitching in LEA (major) and LEA-A69T (minor) with photoconversion capability, different from ~16/29 ps in correlation with the Gln62/His62 side-chain twist in ALL-GFP/ALL-Q62H, indicative of the light-induced conformational relaxation preferences in various local environments. A minor subpopulation of LEA-A69T capable of positive photoswitching was revealed by time-resolved electronic spectroscopies with targeted light irradiation wavelengths. The unveiled chromophore structure and dynamics inside engineered FPs in an aqueous buffer solution can be generalized to improve other green-to-red photoconvertible FPs from the bottom up for deeper biophysics with molecular biology insights and powerful bioimaging advances.     

绿色荧光蛋白及其应用

随着对绿色荧光蛋白(green fluorescent protein,GFP)研究的不断深入,人们对其结构、荧光产生机理等已有较为全面的认识。近年来利用GFP及其它荧光蛋白(FPs)发展了诸如荧光互补技术(FC)、荧光共振能量转移技术(FRET)和超分辨成像(super-resolution imaging)等一系列新技术,极大地促进了生物学、医药科学的研究。主要介绍了荧光蛋白的结构,荧光产生的机理,不同类型的荧光蛋白和基于荧光蛋白产生的新技术等方面的最新研究进展。     

含Dsred类似生色团的红色荧光蛋白的发展及应用

自从绿色荧光蛋白(GFP)被发现以来,荧光蛋白在生物医学领域已经成为一种重要的荧光成像工具．随着红色荧光蛋白DsRed的出现,各种优化的DsRed突变体和远红荧光蛋白也不断涌现．其中荧光蛋白生色团的形成机制对改建更优的荧光蛋白变种影响很大,对于红色荧光蛋白而言,大多数的红色荧光蛋白的生色团类型为DsRed类似生色团,在此基础上又出现了Far-red DsRed类似生色团．目前,含DsRed类似生色团的荧光蛋白主要有单体红色荧光蛋白、光转换荧光蛋白、斯托克斯红移蛋白、荧光计时器等．这些优化的荧光蛋白作为分子探针可以实现对活细胞、细胞器或胞内分子的时空标记和追踪,已经在生物工程学、细胞生物学、基础医学领域得到广泛应用．本文综述了含DsRed类似生色团的荧光蛋白的研究进展及其应用,以及由此发展起来的远红荧光蛋白在活体显微成像技术中的应用,并展望了荧光探针技术研究的新方向．     

Directed evolution of a monomeric, bright and photostable version of Clavularia cyan fluorescent protein: structural characterization and applications in fluorescence imaging

The arsenal of engineered variants of the GFP [green FP (fluorescent protein)] from Aequorea jellyfish provides researchers with a powerful set of tools for use in biochemical and cell biology research. The recent discovery of diverse FPs in Anthozoa coral species has provided protein engineers with an abundance of alternative progenitor FPs from which improved variants that complement or supersede existing Aequorea GFP variants could be derived. Here, we report the engineering of the first monomeric version of the tetrameric CFP (cyan FP) cFP484 from Clavularia coral. Starting from a designed synthetic gene library with mammalian codon preferences, we identified dimeric cFP484 variants with fluorescent brightness significantly greater than the wild-type protein. Following incorporation of dimer-breaking mutations and extensive directed evolution with selection for blue-shifted emission, high fluorescent brightness and photostability, we arrived at an optimized variant that we have named mTFP1 [monomeric TFP1 (teal FP 1)]. The new mTFP1 is one of the brightest and most photostable FPs reported to date. In addition, the fluorescence is insensitive to physiologically relevant pH changes and the fluorescence lifetime decay is best fitted as a single exponential. The 1.19 A crystal structure (1 A=0.1 nm) of mTFP1 confirms the monomeric structure and reveals an unusually distorted chromophore conformation. As we experimentally demonstrate, the high quantum yield of mTFP1 (0.85) makes it particularly suitable as a replacement for ECFP (enhanced CFP) or Cerulean as a FRET (fluorescence resonance energy transfer) donor to either a yellow or orange FP acceptor.     

Chromophore-protein interactions in the anthozoan green fluorescent protein asFP499

Despite their similar fold topologies, anthozoan fluorescent proteins (FPs) can exhibit widely different optical properties, arising either from chemical modification of the chromophore itself or from specific interactions of the chromophore with the surrounding protein moiety. Here we present a structural and spectroscopic investigation of the green FP asFP499 from the sea anemone Anemonia sulcata var. rufescens to explore the effects of the protein environment on the chromophore. The optical absorption and fluorescence spectra reveal two discrete species populated in significant proportions over a wide pH range. Moreover, multiple protonation reactions are evident from the observed pH-dependent spectral changes. The x-ray structure of asFP499, determined by molecular replacement at a resolution of 1.85 A, shows the typical beta-barrel fold of the green FP from Aequorea victoria (avGFP). In its center, the chromophore, formed from the tripeptide Gln(63)-Tyr(64)-Gly(65), is tightly held by multiple hydrogen bonds in a polar cage that is structurally quite dissimilar to that of avGFP. The x-ray structure provides interesting clues as to how the spectroscopic properties are fine tuned by the chromophore environment.     

Fluorescent proteins for FRET microscopy: monitoring protein interactions in living cells

The discovery and engineering of novel fluorescent proteins (FPs) from diverse organisms is yielding fluorophores with exceptional characteristics for live-cell imaging. In particular, the development of FPs for fluorescence (or F?rster) resonance energy transfer (FRET) microscopy is providing important tools for monitoring dynamic protein interactions inside living cells. The increased interest in FRET microscopy has driven the development of many different methods to measure FRET. However, the interpretation of FRET measurements is complicated by several factors including the high fluorescence background, the potential for photoconversion artifacts and the relatively low dynamic range afforded by this technique. Here, we describe the advantages and disadvantages of four methods commonly used in FRET microscopy. We then discuss the selection of FPs for the different FRET methods, identifying the most useful FP candidates for FRET microscopy. The recent success in expanding the FP color palette offers the opportunity to explore new FRET pairs.     

Fluorescent protein engineering by in vivo site-directed mutagenesis

In vivo site-directed mutagenesis by single-stranded deoxyribonucleic acid recombineering is a facile method to change the color of fluorescent proteins (FPs) without cloning. Two different starting alleles of GFP were targeted for mutagenesis: gfpmut3* residing in the Escherichia coli genome and egfp carried by a bacterial/mammalian dual expression lentiviral plasmid vector. Fluorescent protein spectra were shifted by subtle modification of the chromophore region and residues interacting with the chromophore of the FP. Eight different FPs (Violeta, Azure, Aqua, Mar, Celeste, Amarillo, Mostaza, and Bronze) were isolated and shown to be useful in multicolor imaging and flow cytometry of bacteria and transgenic human stem cells. To make in vivo site-directed mutagenesis more efficient, the recombineering method was optimized using the fluorescence change as a sensitive quantitative assay for recombination. A set of rules to simplify mutant isolation by recombineering is provided.     

A Monomeric Photoconvertible Fluorescent Protein for Imaging of Dynamic Protein Localization

The use of green-to-red photoconvertible fluorescent proteins (FPs) enables researchers to highlight a subcellular population of a fusion protein of interest and to image its dynamics in live cells. In an effort to enrich the arsenal of photoconvertible FPs and to overcome the limitations imposed by the oligomeric structure of natural photoconvertible FPs, we designed and optimized a new monomeric photoconvertible FP. Using monomeric versions of Clavularia sp. cyan FP as template, we employed sequence-alignment-guided design to create a chromophore environment analogous to that shared by known photoconvertible FPs. The designed gene was synthesized and, when expressed in Escherichia coli, found to produce green fluorescent colonies that gradually switched to red after exposure to white light. We subjected this first-generation FP [named mClavGR1 (monomeric Clavularia-derived green-to-red photoconvertible 1)] to a combination of random and targeted mutageneses and screened libraries for efficient photoconversion using a custom-built system for illuminating a 10-cm Petri plate with 405-nm light. Following more than 15 rounds of library creation and screening, we settled on an optimized version, known as mClavGR2, that has eight mutations relative to mClavGR1. Key improvements of mClavGR2 relative to mClavGR1 include a 1.4-fold brighter red species, 1.8-fold higher photoconversion contrast, and dramatically improved chromophore maturation in E. coli. The monomeric status of mClavGR2 has been demonstrated by gel-filtration chromatography and the functional expression of a variety of mClavGR2 chimeras in mammalian cells. Furthermore, we have exploited mClavGR2 to determine the diffusion kinetics of the membrane protein intercellular adhesion molecule 1 both when the membrane is in contact with a T-lymphocyte expressing leukocyte-function-associated antigen 1 and when it is not. These experiments clearly establish that mClavGR2 is well suited for rapid photoconversion of protein subpopulations and subsequent tracking of dynamic changes in localization in living cells.     

Design of near-infrared single-domain fluorescent protein GAF-FP based on bacterial phytochrome

Fluorescent proteins (FPs) are widely used as genetically encoded markers for quantitative and noninvasive study of biological processes. Development of biomarkers that are fluorescent in the near-infrared spectral range allows the tissues of animals to be studied at a deeper level because they are more permeable to the light of this wavelength range than that of visible range. Such properties as low molecular weight and monomeric state are important for widespread use of FPs. In this paper, we managed to obtain FP based on the chromophore-binding domain of bacterial phytochrome (BphP) from Rhodopseudomonas palustris (RpB-phP1), named GAF-FP, with a molecular weight of ~19 kDa, which is half that of other FP based on BphP and 1.4 times lower than that of commonly used GFP-like proteins, which are fluorescent in the near-infrared range. In contrast to most other near-infrared FPs, GAF-FP is a monomer, which has a high photostability, and its structure is stable to the incorporation of small peptide inserts. Moreover, GAF-FP is capable of covalent attachment of two different tetrapyrrole chromophores: phycocyanobilin (PCB) and biliverdin (BV), which is contained in mammalian tissues. GAF-FP with attached BV as a chromophore (GAF-FP–BV) has the main absorption band with a maximum at 635 nm. The fluorescence maximum falls at 670 nm, whereby GAF-FP has a high ratio of the fluorescence signal to the background signal even if FP is localized at a depth of several mm below the tissue surface. Together with the near-infrared absorption band, GAF-FP–BV also has an absorption band in the violet region of the spectrum with a maximum at 378 nm. We used this property to design a chimeric protein consisting of modified luciferase from Renilla reniformis (RLuc8) and GAF-FP. We showed resonance energy transfer from the substrate, the excited state of which occurs when oxidized by luciferase, to the chromophore GAF-FP–BV in the designed fusion protein. In the absence of an energy acceptor, RLuc8 catalyzes the cleavage of the substrate with the emission of the light with a maximum at 400 nm. At the same time, the energy from the substrate is transferred to the FP chromophore and then emitted in the near-infrared range corresponding to the spectrum of GAF-FP fluorescence in the GAF-FP–RLuc8 chimeric protein. These results open the way for the development of new small near-infrared FPs based on various natural BphPs with a view to their widespread use in cell and molecular biology.     

A new configuration of the Zeiss LSM 510 for simultaneous optical separation of green and red fluorescent protein pairs.

The power and simplicity of genetically encoded fluorophores (fluorescent proteins, FPs) have drawn many molecular biologists to light microscopy. First generation FPs suffered from overlapping excitation and emission spectra, which limited their use together in pairs (Patterson et al., J Cell Sci 2001;114 (Part 5):837-838). Image acquisition and processing techniques, collectively known as linear unmixing, have been developed to separate overlapping fluorescence signals encountered in the imaging of FP pairs and also in FRET. These specialized techniques are not without their potential drawbacks, including limitations on sensitivity and time-resolution for live cell imaging, and the risk of artifact in the hands of nonspecialists. With the advent of a new generation of red-shifted FPs (Shaner et al., Nat Biotechnol 2004;22:1567-1572; Verkhusha and Lukyanov, Nat Biotechnol 2004;22:289-296) careful selection of excitation sources and emission filters obviate the need for linear unmixing when simple two channel imaging of FPs is required. Here we introduce a new configuration of the Zeiss LSM 510 laser scanning confocal microscope, optimized for live cell imaging of green fluorescent protein (GFP) together with spectral variants such as mRFP1 and mCherry using standard photo-multipliers. A 2 mW, 594 nm HeNe laser was chosen as the excitation source for the red FP. This wavelength efficiently excites the aforementioned red variants without limiting the detection range of GFP emission during simultaneous two-channel imaging. Compared to excitation of GFP and mCherry at 488 and 543 nm, excitation at 488 and 594 nm approximately doubles the sensitivity of GFP detection and eliminates bleed-through of GFP into the mCherry channel. However, sensitivity of mCherry detection is decreased by 30%, suggesting the need for red FPs having longer emission peaks. Practical advantages to the simultaneous optical separation of FPs with nonoverlapping emission spectra include simplicity, robustness, reduced risk of artifact, and increased sensitivity during live cell imaging.     

Structure‐guided evolution of Green2 toward photostability and quantum yield enhancement by F145Y substitution

Quantum yield is a determinant for fluorescent protein (FP) applications and enhancing FP brightness through gene engineering is still a challenge. Green2, our de novo FP synthesized by microfluidic picoarray and cloning, has a significantly lower quantum yield than enhanced green FP, though they have high homology and share the same chromophore. To increase its quantum yield, we introduced an F145Y substitution into Green2 based on rational structural analysis. Y145 significantly increased the quantum yield (0.22 vs. 0.18) and improved the photostability (t_1/2, 73.0 s vs. 46.0 s), but did not affect the excitation and emission spectra. Further structural analysis showed that the F145Y substitution resulted in a significant electrical field change in the immediate environment of the chromophore. The perturbation of electrostatic charge around the chromophore lead to energy barrier changes between the ground and excited states, which resulted in the enhancement of quantum yield and photostability. Our results illustrate a typical example of engineering an FP based solely on fluorescence efficiency optimization and provide novel insights into the rational evolution of FPs.     

Reversible photoswitching in fluorescent proteins: a mechanistic view

Phototransformable fluorescent proteins (FPs) have received considerable attention in recent years, because they enable many new exciting modalities in fluorescence microscopy and biotechnology. On illumination with proper actinic light, phototransformable FPs are amenable to long-lived transitions between various fluorescent or nonfluorescent states, resulting in processes known as photoactivation, photoconversion, or photoswitching. Here, we review the subclass of photoswitchable FPs with a mechanistic perspective. These proteins offer the widest range of practical applications, including reversible high-density data bio-storage, photochromic FRET, and super-resolution microscopy by either point-scanning, structured illumination, or single molecule-based wide-field approaches. Photoswitching can be engineered to occur with high contrast in both Hydrozoan and Anthozoan FPs and typically results from a combination of chromophore cis-trans isomerization and protonation change. However, other switching schemes based on, for example, chromophore hydration/dehydration have been discovered, and it seems clear that ever more performant variants will be developed in the future.     

Mechanism of ArcLight derived GEVIs involves electrostatic interactions that can affect proton wires

The genetically encoded voltage indicators ArcLight and its derivatives mediate voltage-dependent optical signals by intermolecular, electrostatic interactions between neighboring fluorescent proteins (FPs). A random mutagenesis event placed a negative charge on the exterior of the FP, resulting in a greater than 10-fold improvement of the voltage-dependent optical signal. Repositioning this negative charge on the exterior of the FP reversed the polarity of voltage-dependent optical signals, suggesting the presence of “hot spots” capable of interacting with the negative charge on a neighboring FP, thereby changing the fluorescent output. To explore the potential effect on the chromophore state, voltage-clamp fluorometry was performed with alternating excitation at 390 nm followed by excitation at 470 nm, resulting in several mutants exhibiting voltage-dependent, ratiometric optical signals of opposing polarities. However, the kinetics, voltage ranges, and optimal FP fusion sites were different depending on the wavelength of excitation. These results suggest that the FP has external, electrostatic pathways capable of quenching fluorescence that are wavelength specific. One mutation to the FP (E222H) showed a voltage-dependent increase in fluorescence when excited at 390 nm, indicating the ability to affect the proton wire from the protonated chromophore to the H222 position. ArcLight-derived sensors may therefore offer a novel way to map how conditions external to the β-can structure can affect the fluorescence of the chromophore and transiently affect those pathways via conformational changes mediated by manipulating membrane potential.     

Multi-domain GFP-like proteins from two species of marine hydrozoans

Proteins homologous to Green Fluorescent Protein (GFP) are widely used as genetically encoded fluorescent labels. Many developments of this technology were spurred by discoveries of novel types of GFP-like proteins (FPs) in nature. Here we report two proteins displaying primary structures never before encountered in natural FPs: they consist of multiple GFP-like domains repeated within the same polypeptide chain. A two-domain green FP (abeGFP) and a four-domain orange-fluorescent FP (Ember) were isolated from the siphonophore Abylopsis eschscholtzii and an unidentified juvenile jellyfish (order Anthoathecata), respectively. Only the most evolutionary ancient domain of Ember is able to synthesize an orange-emitting chromophore (emission at 571 nm), while the other three are purely green (emission at 520 nm) and putatively serve to maintain the stability and solubility of the multidomain protein. When expressed individually, two of the green Ember domains form dimers and the third one exists as a monomer. The low propensity for oligomerization of these domains would simplify their adoption as in vivo labels. Our results reveal a previously unrecognized direction in which natural FPs have diversified, suggesting new avenues to look for FPs with novel and potentially useful features.     

Going Viral with Fluorescent Proteins

Many longstanding questions about dynamics of virus-cell interactions can be answered by combining fluorescence imaging techniques with fluorescent protein (FP) tagging strategies. Successfully creating a FP fusion with a cellular or viral protein of interest first requires selecting the appropriate FP. However, while viral architecture and cellular localization often dictate the suitability of a FP, a FP''s chemical and physical properties must also be considered. Here, we discuss the challenges of and offer suggestions for identifying the optimal FPs for studying the cell biology of viruses.     

A structural basis for reversible photoswitching of absorbance spectra in red fluorescent protein rsTagRFP

rsTagRFP is the first monomeric red fluorescent protein (FP) with reversibly photoswitchable absorbance spectra. The switching is realized by irradiation of rsTagRFP with blue (440 nm) and yellow (567 nm) light, turning the protein fluorescence ON and OFF, respectively. It is perhaps the most useful probe in this color class that has yet been reported. Because of the photoswitchable absorbance, rsTagRFP can be used as an acceptor in photochromic Förster resonance energy transfer. Yellow FPs, YPet and mVenus, are demonstrated to be excellent photochromic Förster resonance energy transfer donors for the rsTagRFP acceptor in its fusion constructs. Analysis of X-ray structures has shown that photoswitching of rsTagRFP is accompanied by cis–trans isomerization and protonation/deprotonation of the chromophore, with the deprotonated cis- and protonated trans-isomers corresponding to its ON and OFF states, respectively. Unlike in other photoswitchable FPs, both conformers of rsTagRFP chromophore are essentially coplanar. Two other peculiarities of the rsTagRFP chromophore are an essentially hydrophobic environment of its p-hydroxyphenyl site and the absence of direct hydrogen bonding between this moiety and the protein scaffold. The influence of the immediate environment on rsTagRFP chromophore was probed by site-directed mutagenesis. Residues Glu145 and His197 were found to participate in protonation/deprotonation of the chromophore accompanying the photoswitching of rsTagRFP fluorescence, whereas residues Met160 and Leu174 were shown to spatially restrict chromophore isomerization, favoring its radiative decay.     

The structure of a far‐red fluorescent protein,AQ143, shows evidence in support of reported red‐shifting chromophore interactions

Engineering fluorescent proteins (FPs) to emit light at longer wavelengths is a significant focus in the development of the next generation of fluorescent biomarkers, as far‐red light penetrates tissue with minimal absorption, allowing better imaging inside of biological hosts. Structure‐guided design and directed evolution have led to the discovery of red FPs with significant bathochromic shifts to their emission. Here, we present the crystal structure of one of the most bathochromically shifted FPs reported to date, AQ143, a nine‐point mutant of aeCP597, a chromoprotein from Actinia equina. The 2.19 Å resolution structure reveals several important chromophore interactions that contribute to the protein's far‐red emission and shows dual occupancy of the green and red chromophores.     

Improved Plasmids for Fluorescent Protein Tagging of Microtubules in Saccharomyces cerevisiae

The ability to fluorescently label microtubules in live cells has enabled numerous studies of motile and mitotic processes. Such studies are particularly useful in budding yeast owing to the ease with which they can be genetically manipulated and imaged by live cell fluorescence microscopy. Because of problems associated with fusing genes encoding fluorescent proteins (FPs) to the native α‐tubulin (TUB1) gene, the FP‐Tub1 fusion is generally integrated into the genome such that the endogenous TUB1 locus is left intact. Although such modifications have no apparent consequences on cell viability, it is unknown if these genome‐integrated FP‐tubulin fusions negatively affect microtubule functions. Thus, a simple, economical and highly sensitive assay of microtubule function is required. Furthermore, the current plasmids available for generation of FP‐Tub1 fusions have not kept pace with the development of improved FPs. Here, we have developed a simple and sensitive assay of microtubule function that is sufficient to identify microtubule defects that were not apparent by fluorescence microscopy or cell growth assays. Using results obtained from this assay, we have engineered a new family of 30 FP‐Tub1 plasmids that use various improved FPs and numerous selectable markers that upon genome integration have no apparent defect on microtubule function.      

Design of small monomeric and highly bright near-infrared fluorescent proteins

Due to the low absorbance in the far-red (FR) and near-infrared (NIR) “optical window”, NIR fluorescent proteins (FPs) are powerful tools for deep imaging. Here, we report three new, highly bright NIR FPs termed BDFP1.8, BDFP1.8:1.8 (tandem BDFP1.8) and BDFP1.9, which evolved from a previously reported FR FP, BDFP1.6: a derivative of ApcF2 from Chroococcidiopsis thermalis sp. PCC7203. ApcF2 binds phycocyanobilin (PCB) non-covalently, while BDFPs, the derivatives of ApcF2, can bind biliverdin (BV) covalently. We identified that dimeric BDFP1.8 and monomeric BDFP1.8:1.8 have a 2.4-and 4.4-fold higher effective brightness, respectively, than iRFP720, which has the highest effective brightness among the reported NIR FPs. Monomeric DBFP1.9 (17 kDa) has one of the smallest masses among highly bright FPs in the FR and NIR regions. Enhancing the affinity between the apo-proteins and the BV chromophore is an effective method to improve the effective brightness of biliprotein FPs. Moreover, BDFP1.8 and 1.9 exhibit higher stability to temperature, pH and light than iRFP720. Finally, the highly bright NIR BDFP1.8 together with FR BDFP1.6 could effectively biolabel cells in dual colors.