Plant-based green synthesis of silver nanoparticles and its effective role in abiotic stress tolerance in crop plants

The development of effective and environmentally friendly methods for the green synthesis of nanoparticles (NPs) is a critical stage in the field of nanotechnology. Silver nanoparticles (AgNPs) are significant due to their unique physical, chemical, and biological properties, as well as their numerous applications. Physical, chemical, and green synthesis approaches can all be used to produce AgNPs; however, synthesis using biological precursors, particularly plant-based green synthesis, has shown outstanding results. In recent years, owing to a combination of frequent droughts, unusual rainfall, salt-affected areas, and high temperatures, climate change has changed several ecosystems. Crop yields have decreased globally as a result of these changes in the environment. Green synthesized AgNPs role in boosting antioxidant defense mechanisms, methylglyoxal (MG) detoxification, and developing tolerance for abiotic stress-induced oxidative damage has been thoroughly described in plant species over the last decade. Although various studies on abiotic stress tolerance and metallic nanoparticles (NPs) in plants have been conducted, but the details of AgNPs mediated abiotic stress tolerance have not been well summarized. Therefore, the plant responses to abiotic stress need to be well understood and to apply the gained knowledge to increase stress tolerance by using AgNPs for crop plants. In this review, we outlined the green synthesis of AgNPs extracted from plant extract. We also have updates on the most important accomplishments through exogenous application of AgNPs to improve plant tolerance to drought, salinity, low and high-temperature stresses.     

Plant extract-mediated biogenic synthesis of silver,manganese dioxide,silver-doped manganese dioxide nanoparticles and their antibacterial activity against food- and water-borne pathogens

Silver nanoparticles (AgNPs), manganese dioxide nanoparticles (MnO₂NPs) and silver-doped manganese dioxide nanoparticles (Ag-doped MnO₂NPs) were synthesized by simultaneous green chemistry reduction approach. Aqueous extract from the leaves of medicinally important plant Cucurbita pepo was used as reducing and capping agents. Various characterization techniques were carried out to affirm the formation of nanoparticles. HR-TEM analysis confirmed the size of nanoparticles in the range of 15–70 nm and also metal doping was confirmed through XRD and EDS analyses. FT-IR analysis confirmed that the presence of biomolecules in the aqueous leaves extract was responsible for nanoparticles synthesis. Further, the concentration of metals and their doping in the reaction mixture was achieved by ICP–MS. The growth curve and well diffusion study of synthesized nanoparticles were performed against food- and water-borne Gram-positive and Gram-negative bacterial pathogens. The mode of interaction of nanoparticles on bacterial cells was demonstrated through Bio-TEM analysis. Interestingly, AgNPs and Ag-doped MnO₂ NPs showed better antibacterial activity against all the tested bacterial pathogens; however, MnO₂NPs alone did not show any antibacterial properties. Hence, AgNPs and Ag-doped MnO₂ NPs synthesized from aqueous plant leaves extract may have important role in controlling various food spoilage caused by bacteria.     

A health concern regarding the protein corona,aggregation and disaggregation

Nanoparticle (NP)–protein complexes exhibit the “correct identity” of NP in biological media. Therefore, protein–NP interactions should be closely explored to understand and modulate the nature of NPs in medical implementations. This review focuses mainly on the physicochemical parameters such as dimension, surface chemistry, morphology of NPs, and influence of pH on the formation of protein corona and conformational changes of adsorbed proteins by different kinds of techniques. Also, the impact of protein corona on the colloidal stability of NPs is discussed. Uncontrolled protein attachment on NPs may bring unwanted impacts such as protein denaturation and aggregation. In contrast, controlled protein adsorption by optimal concentration, size, pH, and surface modification of NPs may result in potential implementation of NPs as therapeutic agents especially for disaggregation of amyloid fibrils. Also, the effect of NPs-protein corona on reducing the cytotoxicity and clinical implications such as drug delivery, cancer therapy, imaging and diagnosis will be discussed. Validated correlative physicochemical parameters for NP–protein corona formation frequently derived from protein corona fingerprints of NPs which are more valid than the parameters obtained only on the base of NP features. This review may provide useful information regarding the potency as well as the adverse effects of NPs to predict their behavior in vivo.     

Synthesis of metallic nanoparticles using plant extracts

Biomolecules present in plant extracts can be used to reduce metal ions to nanoparticles in a single-step green synthesis process. This biogenic reduction of metal ion to base metal is quite rapid, readily conducted at room temperature and pressure, and easily scaled up. Synthesis mediated by plant extracts is environmentally benign. The reducing agents involved include the various water soluble plant metabolites (e.g. alkaloids, phenolic compounds, terpenoids) and co-enzymes. Silver (Ag) and gold (Au) nanoparticles have been the particular focus of plant-based syntheses. Extracts of a diverse range of plant species have been successfully used in making nanoparticles. In addition to plant extracts, live plants can be used for the synthesis. Here we review the methods of making nanoparticles using plant extracts. Methods of particle characterization are reviewed and potential applications of the particles in medicine are discussed.     

Continuous Flow Routes toward Designer Metal Nanocatalysts

Mono‐ and multimetallic nanoparticles (NPs) have diverse and tunable physicochemical properties that arise from their compositions as well as crystallite size and shape. The ability to control precisely the composition and structure of NPs through synthesis is central to achieving state‐of‐the‐art designer metal NPs for use as catalysts and electrocatalysts. However, a major limitation to the use of designer metal NPs as catalysts is the ability to scale their syntheses while maintaining structural precision. To address this challenge, continuous flow routes to metal NPs involving the use of droplet microreactors are being developed, providing the synthetic versatility necessary to achieve known and completely new nanostructures. This progress report outlines how the chemistry and process parameters of droplet microreactors can be used to achieve high performing nanocatalysts through control of NP composition, size, shape, and architecture and outlines directions toward previously unimaginable nanostructures.     

Exposure–Response of Wheat Cultivars to TiO2 Nanoparticles in Contrasted Soils

Unprecedent usage of nanoparticles (NPs) over very large scale has raised concerns about their release into agro-environments. The effects of these emerging pollutants on staple food crops and contrasted soils are not very well documented. The main aim of present work was to investigate the exposure–response of 10 wheat cultivars to titanium dioxide (TiO₂) NPs (0–1000 mg kg^?1) in terms of early growth parameters followed by evaluation of the selected cultivar for complete growth cycle cultivated on contrasted soils in terms of various physicochemical characteristics. Among all the 10 tested wheat cultivars, only Galaxy cultivar sustained to the whole TiO₂ NPs exposure range. TiO₂ NPs exposure at 1000 mg kg^?1 adversely affected the early growth response parameters in MH, Ujala, Uqab, Shafaq and FSD wheat cultivars which clearly indicated the toxic effects induced by NPs. Pot studies were performed using Galaxy cultivar cultivated in different textured soils (loam and sandy loam). At the highest tested concentration of TiO₂ NPs, plant growth, biomass and phosphorus (P) concentration along with other tested parameters were not improved in both types of soils compared to their respective control groups. These results suggested the controlled use of NPs to avoid the NPs contamination in soil–plant ecosystems in the longer run.     

Plant VOC emissions: making use of the unavoidable

All plants emit substantial amounts of phytogenic volatile organic compounds (PVOCs), which include alkanes, alkenes, alcohols, aldehydes, eters, esters and carboxylic acids. Defence, communication and/or protection against extreme conditions have been proposed as reasons for these emissions. However, Rosenstiel and colleagues have recently proposed that emission of PVOCs represents a metabolic 'safety valve' by preventing the unnecessary sequestration of phosphates. Additionally, Niinemets and colleagues suggest that the emission rates of some PVOCs are determined by the principal physicochemical characteristics of the emitted compounds, such as their solubility, volatility and diffusivity, rather than by physiological mechanisms, such as their synthesis rates. These two new studies lead to the hypothesis that there is not necessarily a specific role for every PVOC emitted, given that their emission is unavoidable as result of their volatility. However, in some cases, natural selection has worked to take advantage of this volatility.     

Molecular Interrogation of the Feeding Behaviour of Field Captured Individual Insects for Interpretation of Multiple Host Plant Use

The way in which herbivorous insect individuals use multiple host species is difficult to quantify under field conditions, but critical to understanding the evolutionary processes underpinning insect–host plant relationships. In this study we developed a novel approach to understanding the host plant interactions of the green mirid, Creontiades dilutus, a highly motile heteropteran bug that has been associated with many plant species. We combine quantified sampling of the insect across its various host plant species within particular sites and a molecular comparison between the insects'' gut contents and available host plants. This approach allows inferences to be made as to the plants fed upon by individual insects in the field. Quantified sampling shows that this “generalist” species is consistently more abundant on two species in the genus Cullen (Fabaceae), its primary host species, than on any other of its numerous listed hosts. The chloroplast intergenic sequences reveal that C. dilutus frequently feeds on plants additional to the one from which it was collected, even when individuals were sampled from the primary host species. These data may be reconciled by viewing multiple host use in this species as an adaptation to survive spatiotemporally ephemeral habitats. The methodological framework developed here provides a basis from which new insights into the feeding behaviour and host plant relationships of herbivorous insects can be derived, which will benefit not only ecological interpretation but also our understanding of the evolution of these relationships.     

Current applications of nanotechnology to develop plant growth inducer agents as an innovation strategy

Abstract

Nanotechnology has been proposed as an important tool and strategy for applying new products in agriculture at the nanometer scale in order to improve the food crop at sustainability and productivity levels for contributing with the agriculture security. Nanoparticles (NPs) have been planted as an intelligent material with a large contact surface per unit mass respect to bulk-products, allowing its effect to be exerted with greater efficiency in a specific point on a plant target. Currently, NPs have been studied to be applied to various species of monocotyledonous and dicotyledonous plants. Some NPs properties such as concentration, shape, size, composition and surface functionality have the ability to regulate the NPs growth effects on the plant during germination and seedling stages under controlled and field conditions. Furthermore, several studies have tried to explain the mechanism of uptake, translocation and accumulation of NPs inside the plant at the organ and cell level, but further studies are needed to determine specific mechanisms and exact action. Nevertheless, evaluation of the toxicity effects of NPs on physiological indexes of the plant is needed to determine the effective dose without producing adverse effects on the plant and food chain. It is noteworthy that studies have indicated that nanoparticles, regardless of their nature, can be efficient inducers of plant growth. However, a series of laboratory tests are required to optimize their application conditions and their specific physiological impact on plants. In this review, we summarize the knowledge about NPs application to induce plant growth to direct future studies in order to propose NPs for technological innovation.     

Plant Extract Synthesized PLA Nanoparticles for Controlled and Sustained Release of Quercetin: A Green Approach

Background

Green synthesis of metallic nanoparticles (NPs) has been extensively carried out by using plant extracts (PEs) which have property of stabilizers/ emulsifiers. To our knowledge, there is no comprehensive study on applying a green approach using PEs for fabrication of biodegradable PLA NPs. Conventional methods rely on molecules like polyvinyl alcohol, polyethylene glycol, D-alpha-tocopheryl poly(ethylene glycol 1000) succinate as stabilizers/emulsifiers for the synthesis of such biodegradable NPs which are known to be toxic. So, there is urgent need to look for stabilizers which are biogenic and non-toxic. The present study investigated use of PEs as stabilizers/emulsifiers for the fabrication of stable PLA NPs. Synthesized PLA NPs through this green process were explored for controlled release of the well known antioxidant molecule quercetin.

Methodology/Principal Findings

Stable PLA NPs were synthesized using leaf extracts of medicinally important plants like Syzygium cumini (1), Bauhinia variegata (2), Cedrus deodara (3), Lonicera japonica (4) and Eleaocarpus sphaericus (5). Small and uniformly distributed NPs in the size range 70±30 nm to 143±36 nm were formed with these PEs. To explore such NPs for drugs/ small molecules delivery, we have successfully encapsulated quercetin a lipophilic molecule on a most uniformly distributed PLA-4 NPs synthesized using Lonicera japonica leaf extract. Quercetin loaded PLA-4 NPs were observed for slow and sustained release of quercetin molecule.

Conclusions

This green approach based on PEs mediated synthesis of stable PLA NPs pave the way for encapsulating drug/small molecules, nutraceuticals and other bioactive ingredients for safer cellular uptake, biodistribution and targeted delivery. Hence, such PEs synthesized PLA NPs would be useful to enhance the therapeutic efficacy of encapsulated small molecules/drugs. Furthermore, different types of plants can be explored for the synthesis of PLA as well as other polymeric NPs of smaller size.     

Biogenic fabrication of nanomaterials from flower-based chemical compounds,characterization and their various applications: A review

Nanotechnology is evolving as a significant discipline of research with various applications. It includes the materials and their applications having one dimension in the range of 1–100 nm. Many chemical and physical protocol have been utilized for the nanoparticles (NPs) fabrication. These protocols are costly, hazardous and consumes high energy. Thus, researchers are inclined towards biological synthesis of NPs using plant and or herbal extract as these methods are simple, sustainable, ecofriendly and cost-effective. Flower is an important part of plants, and contained several phytochemicals such as flavonoids, terpenoids, coumarins, sterol and xanthones which acts as an important precursor for NPs synthesis. These compounds acted as reducing as well as stablishing agent during fabrication processes. They have been thoroughly characterized by various techniques. The fabricated NPs have shown potential antimicrobial activity against bacterial and fungal infections. They have been also used as potential therapeutic agent for human breast cancer, gastric adenocarcinoma cell, colorectal adenocarcinoma cell and pancreas ductal adenocarcinoma cells. Overall, the aim of this review article to facilitates the recent understanding of flower-mediated NPs fabrication (a sustainable and ecofriendly resource), their application in different disciplines and challenges.     

Biomimetic synthesis and characterisation of protein capped silver nanoparticles

A controlled and up-scalable route for the biosynthesis of silver nanopartilces (NPs) mediated by fungal proteins of Coriolus versicolor has been undertaken for the first time. The fungus when challenged with silver nitrate solution accumulated silver NPs on its surface in 72h which could be reduced to 1h by tailoring the reaction conditions. Under alkaline conditions, the reaction was much faster and could easily proceed at room temperature even without stirring. The resulting Ag NPs displayed controllable structural and optical properties depending on the experimental parameters such as pH and reaction temperatures. The average size, morphology, and structure of particles were determined by AFM, TEM, XRD and UV/Visible absorption spectrophotometry. Fourier transform infrared study disclosed that the amino groups were bound to the particles, which was accountable for the stability of NPs. It further confirmed the presence of protein as the stabilizing and capping agent surrounding the silver NPs. Experiments were conducted both with, media in which fungus was initially harvested and that of pristine fungal mycelium alone. Under normal conditions, in the case of media extracellular synthesis took place whereby other than the fungal proteins, glucose was also responsible for the reduction. In the case of fungal mycelium, the intracellular formation of Ag NPs, could be tailored to give both intracellular and extracellular Ag NPs under alkaline conditions whereby the surface S-H groups of the fungus played a major role.     

Bioengineered silver nanoparticles using Curvularia pallescens and its fungicidal activity against Cladosporium fulvum

Microorganisms based biosynthesis of nanomaterials has triggered significant attention, due to their great potential as vast source of the production of biocompatible nanoparticles (NPs). Such biosynthesized functional nanomaterials can be used for various biomedical applications. The present study investigates the green synthesis of silver nanoparticles (Ag NPs) using the fungus Curvularia pallescens (C. pallescens) which is isolated from cereals. The C. pallescens cell filtrate was used for the reduction of AgNO₃ to Ag NPs. To the best of our knowledge C. pallescens is utilized first time for the preparation of Ag NPs. Several alkaloids and proteins present in the phytopathogenic fungus C. pallescens were mainly responsible for the formation of highly crystalline Ag NPs. The as-synthesized Ag NPs were characterized by using UV–Visible spectroscopy, X-ray diffraction and transmission electron microscopy (TEM). The TEM micrographs have revealed that spherical shaped Ag NPs with polydisperse in size were obtained. These results have clearly suggested that the biomolecules secreted by C. pallescens are mainly responsible for the formation and stabilization of nanoparticles. Furthermore, the antifungal activity of the as-prepared Ag NPs was tested against Cladosporium fulvum, which is the major cause of a serious plant disease, known as tomato leaf mold. The synthesized Ag NPs displayed excellent fungicidal activity against the tested fungal pathogen. The extreme zone of reduction occurred at 50 μL, whereas, an increase in the reduction activity is observed with increasing the concentration of Ag NPs. These encouraging results can be further exploited by employing the as synthesized Ag NPs against various pathogenic fungi in order to ascertain their spectrum of fungicidal activity.     

Toxicity impacts of chemically and biologically synthesized CuO nanoparticles on cell suspension cultures of <Emphasis Type="Italic">Nicotiana tabacum</Emphasis>

Nanotechnology has quite a lot of applications in various fields of industrial sectors like food and agriculture. Although nanotechnology can improve the quality of life, its possible associated risks should be assessed. Here copper oxide nanoparticles (CuO NPs) were synthesized by chemical (polymer pyrolysis) and biological (green) methods with an average size of 30 and 44 nm, respectively. Afterwards, a cell biology approach was applied to evaluate the toxic effects of chemically and biologically synthesized CuO nanoparticles on tobacco cell suspension cultures. Both types of CuO nanoparticles significantly dropped the viability of the cells in a dose and time dependent manner. Accordingly, tobacco cells were found to increase the activity of antioxidant enzymes after 48 h of exposure to nanoparticles. The production of reactive oxygen species (ROS) and malondialdehyde (MDA) in a dose dependent manner was also observed. Assessment of the toxicity of CuO NPs revealed that chemically synthesized NPs were more toxic than biologically synthesized ones. It can be concluded that the organic components of the plant extract as capping agents that remain on the surface of green synthesized CuO NPs may reduce their toxicity effects.     

Development of a multimetric plant-based index of biotic integrity for assessing the ecological state of forested,urban and agricultural natural wetlands of Jimma Highlands,Ethiopia

Wetlands are vital natural resources thereby providing ecological and socio-economic benefits to the people. However, anthropogenic activities have seriously changed the ecological conditions of wetlands worldwide, especially in developing nations like Ethiopia. Predominantly, the absence of biomonitoring tool greatly hampers the protection and management of wetlands. Therefore, the objective of this research is to develop a plant-based index of biological integrity for facilitating the management of wetlands. Accordingly, 122 plant species belonging to 37 families were collected and identified from forested, urban and agricultural wetland types and included in the analysis of the plant metrics. Initially, we reviewed and screened 35 potential metrics. Then, we selected four core metrics (% cover of native species, sensitive plant species richness, tolerant plant species richness and% of shrub species richness) using the decrease or increase responses to human disturbances, Mann-Whitney U test and redundant metric test. A trisect-quartile range system using box plots of the reference or impaired sites of wetlands was established to provide values for each core metrics. Then after, we combined the core metrics to develop the plant-based index of biological integrity. Finally, we validated the index by comparing the index response to different wetland types. Additionally, the index was validated based on the measured environmental variables that characterize the human disturbance gradient of wetlands. We found that the plant-based index is robust to discriminate the reference wetlands from impaired wetlands and can also be used as an effective tool for evaluating the long term natural wetland conditions of the Eastern African wetlands in the future.     

Phytochemicals and Insect Control: An Antifeedant Approach

Plants based pest control agents have long been touted as alternatives to synthetic chemicals for integrated pest management. Such phytochemicals reputedly pose little threat to the environment or to human health. Bioactivity of plant-based compounds is well documented in literature and is a subject of increasing importance. An antifeedant approach for insect control has been extensively studied, at least at laboratory level, though only a handful of plant-based compounds are currently used in agriculture. The known active plant-based antifeedants belong to groups like chromenes, polyacetylenes, saponins, quassinoids, cucurbitacins, cyclopropanoid acids, phenolics, alkaloids, various types of terpenes and their derivatives etc., and each insect species may process these allomones in a thoroughly idiosyncratic way, so that the same compound may have very different fates and consequences in different species of insects, thus pointing to different mechanisms involved in antifeedant action. It can also be visualized that insect feeding deterrents may be perceived either by stimulation of specialized deterrent receptors or by distortion of the normal function of neurons, which perceive phagostimulating compounds. Some plant antifeedants influence the feeding activity through a combination of these two principal modes of action. Only a few highly active antifeedants have been looked into from a commercial point of view, which makes it impossible to systemize or to predict any molecular motifs in feeding inhibition. Structure activity relationship studies also do not point to any generalization. “Mix and Match” systems may help in developing a cocktail of feeding inhibitors that can be used in developing a customized formulation against a specific category of pests. Application of such products will be broad and will not be limited to targeted pests and to plant parts. Decreased deterrence resulting from habituation has been suggested that could pose different implications for pest management than does decreased deterrence resulting from increased tolerance to toxic substances. Genetically modified plants, which could produce the active antifeedant substances in amounts high enough to protect the plants from further herbivorous damage, could be a possibility in the future.     

Antioxidant properties and cytotoxic effects of selected edible plants in Southeast Asia for further use as phytogenic antioxidant additives

Excessive free radicals in human and animal bodies can cause oxidative stress (OS) which damages cells and tissues. Plant materials with high antioxidant potential would resolve the OS problem. Thus, this study proposed to investigate the total phenolic (TPC) and flavonoid contents (TFC), antioxidant capacities and cytotoxicity in 17 edible plant materials from herbs, fruits, vegetables and plant by-products available in Southeast Asia for future use in the food or feed industry. Among 17 plant materials, Syzygium aromaticum (clove), Camellia sinensi (green tea pomace) from the beverage industry and Persicaria odorata (Vietnamese coriander) showed a prominent amount of TPC and TFC. These three plants and their combination (1:1:1 ratio, v:v:v) also possessed a remarkable antioxidant function in terms of DPPH, ABTS and FRAP, as well as showing a strong ROS inhibition through HepG2 cells. The cytotoxicity test of the crude extract of clove, green tea pomace and Vietnamese coriander, or their combination can be used between 0.032 and 0.255, 0.011 to 0.088, 0.022 to 0.178 and 0.021 to 0.346 mg/mL, respectively, without impeding cell viability. A combined mixture of clove, green tea pomace and Vietnamese coriander revealed the synergistic properties of antioxidants and cell safety. This indicates that there is a potential use of various antioxidant bioactive compounds in plant materials tested for use as phytogenic antioxidant additives.     

CeO2 nanoparticles synthesized through green chemistry are biocompatible: In vitro and in vivo assessment

Widespread use of cerium oxide (CeO₂) nanoparticles (NPs) is found in almost all areas of research due to their distinctive properties. CeO₂ NPs synthesized via green chemistry have been characterized for antioxidant, phytochemical, and biological potential. Physical characterization through scanning electron microscopy, XRD, and TGA showed that the NPs are circular in shape, 20‐25 nm in size, and stable in a wide range of temperature. NPs display significant antioxidant (32.7% free radical scavenging activity) and antileishmanial (IC₅₀ 48 µg mL^?1) properties. In vitro toxicity tested against lymphocytes verified that NPs are biocompatible (99.38% viability of lymphocytes at 2.5 μg mL^?1). In vivo toxicity experiments showed no harmful effects on rat serum chemistry and histology of various organs and did not even change the concentration of antioxidative enzymes, total protein contents, lipid peroxidation, and nitrosative stress. These observations are in line with the statement that plant‐based synthesis of CeO₂ NPs lessens or nullifies in vitro and in vivo toxicity and hence CeO₂ NPs are regarded as a safe and biocompatible material to be used in drug delivery.     

Influence of phytochemicals on the biocompatibility of inorganic nanoparticles: a state-of-the-art review

Inorganic nanoparticles (NPs) are among the most produced NPs that could be used in consumer products and as healthcare materials, however, the intrinsic toxicity particularly through the mechanism associated oxidative stress raises the health concern about inorganic NP exposure. Phytochemicals are bioactive metabolites derived from plants as well as non-pathogenic microorganisms living within plants and have been shown to be beneficial to human health with their anti-aging, anti-cancer, anti-inflammation and anti-oxidant properties. In the present review, the influence of on the biocompatibility of inorganic NPs was discussed. It has been shown that phytochemicals could be used as bio-friendly capping agents for green synthesis of inorganic NPs, and phytochemical coated inorganic NPs were remarkable stable and biocompatible with high therapeutic efficiency. Meanwhile, the presence of phytochemicals was also able to reduce the side effects and enhance the therapeutic abilities of inorganic NPs, which is likely attributed to the anti-oxidative properties of phytochemicals. Thus, using phytochemicals could be a promising and plausible way to reduce side effects and increase the biocompatibility of inorganic NPs for biomedical applications.     

Nanoparticles for biomedical imaging: fundamentals of clinical translation

Because of their large size compared to small molecules and their multifunctionality, nanoparticles (NPs) hold promise as biomedical imaging, diagnostic, and theragnostic agents. However, the key to their success hinges on a detailed understanding of their behavior after administration into the body. NP biodistribution, target binding, and clearance are complex functions of their physicochemical properties in serum, which include hydrodynamic diameter, solubility, stability, shape and flexibility, surface charge, composition, and formulation. Moreover, many materials used to construct NPs have real or potential toxicity or may interfere with other medical tests. In this review, we discuss the design considerations that mediate NP behavior in the body and the fundamental principles that govern clinical translation. By analyzing those nanomaterials that have already received regulatory approval, most of which are actually therapeutic agents, we attempt to predict which types of NPs hold potential as diagnostic agents for biomedical imaging. Finally, using quantum dots as an example, we provide a framework for deciding whether an NP-based agent is the best choice for a particular clinical application.