Benthic microalgae in coral reef sediments of the southern Great Barrier Reef,Australia

The abundance and productivity of benthic microalgae in coral reef sediments are poorly known compared with other, more conspicuous (e.g. coral zooxanthellae, macroalgae) primary producers of coral reef habitats. A survey of the distribution, biomass, and productivity of benthic microalgae on a platform reef flat and in a cross-shelf transect in the southern Great Barrier Reef indicated that benthic microalgae are ubiquitous, abundant (up to 995.0 mg chlorophyll (chl) a m^–2), and productive (up to 110 mg O₂ m^–2 h^–1) components of the reef ecosystem. Concentrations of benthic microalgae, expressed as chlorophyll a per surface area, were approximately 100-fold greater than the integrated water column concentrations of microalgae throughout the region. Benthic microalgal biomass was greater on the shallow water platform reef than in the deeper waters of the cross-shelf transect. In both areas the benthic microalgal communities had a similar composition, dominated by pennate diatoms, dinoflagellates, and cyanobacteria. Benthic microalgal populations were potentially nutrient-limited, based on responses to nitrogen and phosphorus enrichments in short-term (7-day) microcosm experiments. Benthic microalgal productivity, measured by O₂ evolution, indicated productive communities responsive to light and nutrient availability. The benthic microalgal concentrations observed (92–995 mg chl a m^–2) were high relative to other reports, particularly compared with temperate regions. This abundance of productive plants in both reef and shelf sediments in the southern Great Barrier Reef suggests that benthic microalgae are key components of coral reef ecosystems.Communicated by Environmental Editor, B.C. Hatcher     

Growth and biomass productivity of Scenedesmus vacuolatus on a twin layer system and a comparison with other types of cultivations

Scenedesmus is a genus of microalgae employed for several industrial uses. Industrial cultivations are performed in open ponds or in closed photobioreactors (PBRs). In the last years, a novel type of PBR based on immobilized microalgae has been developed termed porous substrate photobioreactors (PSBR) to achieve significant higher biomass density during cultivation in comparison to classical PBRs. This work presents a study of the growth of Scenedesmus vacuolatus in a Twin Layer System PSBR at different light intensities (600 μmol photons m⁻² s⁻¹ or 1000 μmol photons m⁻² s⁻¹), different types and concentrations of the nitrogen sources (nitrate or urea), and at two CO₂ levels in the gas phase (2% or 0.04% v/v). The microalgal growth was followed by monitoring the attached biomass density as dry weight, the specific growth rate and pigment accumulation. The highest productivity (29 g m⁻² d⁻¹) was observed at a light intensity of 600 μmol photons m⁻² s⁻¹ and 2% CO₂. The types and concentrations of nitrogen sources did not influence the biomass productivity. Instead, the higher light intensity of 1000 μmol photons m⁻² s⁻¹ and an ambient CO₂ concentration (0.04%) resulted in a significant decrease of productivity to 18 and 10–12 g m⁻² d⁻¹, respectively. When compared to the performance of similar cultivation systems (15–30 g m⁻² d⁻¹), these results indicate that the Twin Layer cultivation System is a competitive technique for intensified microalgal cultivation in terms of productivity and, at the same time, biomass density.

     

Effect of light supply and carbon source on cell growth and cellular composition of a newly isolated microalga Chlorella vulgaris ESP‐31

Light supply is one of the most important factors affecting autotrophic growth of microalgae. This study investigated the effect of the type and light intensity of artificial light sources on the cell growth of an indigenous microalga Chlorella vulgaris ESP‐31 obtained from southern Taiwan. In addition, a dissolved inorganic carbon source (i.e. sodium bicarbonate) was used to improve the biomass production of strain ESP‐31. The results show that a new fluorescent light source (TL5) was effective in indoor cultivation of microalgae. Better overall productivity of 0.029 g dry cell weight/L‐d was obtained when using TL5 lamps as the light source with a light intensity of 9 W/m². A carbon source (sodium bicarbonate) concentration of 1000 mg/L was found to be optimal for the growth of strain ESP‐31 in terms of both biomass production and carbon source utilization. Under the optimal growth conditions, the resulting microalgal biomass consisted of 25–30% protein, 6–10% carbohydrate, and 30–40% lipid.     

Growth model for raceway pond cultivation of Desmodesmus sp. MCC34 isolated from a local water body

Biofuel production by microalgae has the advantage of higher biomass productivity over land crops. The selection of potential microalgae depends on the growth in outdoor mass cultivation during different seasons, which can be predicted by a mathematical model. Here, freshwater green algae were isolated from a local water body in Pilani, Rajasthan, India (geographical coordinates: 28°22′N 75°36′E) and characterized by microscopy and ribosomal RNA analysis. The strain was submitted to the Indian Agricultural Research Institute's microbial culture collection (IARI, India) and identified as Desmodesmus sp. MCC34. This strain, along with a fresh water green algae (Chlorella minutissima), two marine green algae species (Dunaliella salina and Dunaliella tertiolecta) and two nitrogen fixing cyanobacteria (Nostoc muscorum and Anabaena doliolum), were screened for lipid productivity and growth kinetics under culture room and raceway pond conditions. Desmodesmus sp. MCC34 showed the highest specific growth rate (0.26 day^?1), biomass production (1.9 g L^?1) and lipid productivity (103 mg L^?1 day^?1). The optimal temperature and saturating light intensity for maximal growth of Desmodesmus sp. MCC34 were 35 °C and 75 μmol m^?2 s^?1 with molar extinction coefficient of 0.22 m² g^?1, respectively. Desmodesmus sp. MCC34 was then subjected to outdoor cultivation in a 20‐m long raceway pond for 18 days during March and November 2013. The areal biomass productivity and volumetric biomass productivity were 13946.23 kg ha^?1 year^?1 and 56.94 mg L^? 1day^?1 during the month of March, decreasing to 6262.28 kg ha^?1 year^?1 and 25.57 mg L^? 1day^?1 during the month of November. A mathematical model was constructed to explain the relationship between biomass production and growth parameters such as temperature, light intensity and nutrient concentration. The productivity values predicted with the proposed model correspond well with the experimental data, suggesting the validity of the model.     

Monitoring microalgal growth of Chlorella minutissima with a new all solid-state contact nitrate selective sensor

As third generation feedstock, microalgae are microorganisms that can grow only in the optimum conditions. There are parameters including the concentration of macro and microelements in nutrient solution, pH, temperature and light intensity that have significant impact on microalgal growth. In recent years, various sensing devices have been developed for sensitive measurement of these parameters during microalgal growth. In this study, a new potentiometric nitrate selective sensor was developed to indicate the nitrate uptake of microalgae and the effect of nitrate nutrient on microalgal growth, specifically, and this sensor was successfully applied to determine nitrate concentration in medium during microalgal growth. Moreover, the effects of nitrate, carbonate and phosphate concentration in the growth medium on biomass production of Chlorella minutissima were investigated by using Box–Behnken design method, and optimum conditions were determined for the highest biomass production of microalgae. As a result of the experiments, it was seen that the highest C. minutissima production was achieved using the medium consist of 2.63 g/L NaNO₃, 0.35 g/L Na₂CO₃ and 0.4 g/L KH₂PO_4. Statistically, it was observed that there was a proportional relationship between the microalgae production and investigated parameters such as carbon, nitrogen and phosphate amounts of culture mediums. The electrode showed a wide linear range between 1.0 × 10⁻¹ and 5.0 × 10⁻⁵ M with a detection limit of the 5 × 10⁻⁶ M and the response time was found as 10 s. The results showed that developed nitrate selective sensor could be successfully applied for continuous measurement of nitrate in microalgal productions at reduced cost.     

Impact of light quality on a native Louisiana Chlorella vulgaris/Leptolyngbya sp. co‐culture

Light effect on cultures of microalgae has been studied mainly on single species cultures. Cyanobacteria have photosynthetic pigments that can capture photons of wavelengths not available to chlorophylls. A native Louisiana microalgae (Chlorella vulgaris ) and cyanobacteria (Leptolyngbya sp.) co‐culture was used to study the effects of light quality (blue–467 nm, green–522 nm, red–640 nm and white–narrow peak at 450 nm and a broad range with a peak at 550 nm) at two irradiance levels (80 and 400 μmol m^?2 s^?1) on the growth, species composition, biomass productivity, lipid content and chlorophyll‐a production. The co‐culture shifted from a microalgae dominant culture to a cyanobacteria culture at 80 μmol m^?2 s^?1. The highest growth for the cyanobacteria was observed at 80 μmol μmol m^?2 s^?1 and for the microalgae at 400 μmol m^?2 s^?1. Red light at 400 μmol m^?2 s^?1 had the highest growth rate (0.41 d^?1), biomass (913 mg L^?1) and biomass productivity (95 mg L^?1 d^?1). Lipid content was similar between all light colors. Green light had the highest chlorophyll‐a content (1649 μg/L). These results can be used to control the species composition of mixed cultures while maintaining their productivity.     

Comparative life cycle assessment of autotrophic cultivation of Scenedesmus dimorphus in raceway pond coupled to biodiesel and biogas production

Life cycle assessment (LCA) of indigenous freshwater microalgae, Scenedesmus dimorphus, cultivation in open raceway pond and its conversion to biodiesel and biogas were carried out. The LCA inventory inputs for the biogas scenario was entirely based on primary data obtained from algal cultivation (in pilot scale raceway pond), harvesting, and biogas production; while only the downstream processing involved in biodiesel production namely drying, reaction and purification were based on secondary data. Overall, eight scenarios were modeled for the integrated process involving: algae-based CO₂ capture and downstream processing scenarios for biodiesel and biogas along with impact assessment of nutrient addition and extent of recycling in a life cycle perspective. The LCA results indicated a huge energy deficit and net CO₂ negative in terms of CO₂ capture for both the biodiesel and biogas scenarios, majorly due to lower algal biomass productivity and higher energy requirements for culture mixing. The sensitivity analysis indicated that variability in the biomass productivity has predominant effect on the primary energy demand and global warming potential (GWP, kg CO₂ eq.) followed by specific energy consumption for mixing algal culture. Furthermore, the LCA results indicated that biogas conversion route from microalgae was more energy efficient and sustainable than the biodiesel route. The overall findings of the study suggested that microalgae-mediated CO₂ capture and conversion to biodiesel and biogas production can be energy efficient at higher biomass productivity (> 10 g m⁻² day⁻¹) and via employing energy-efficient systems for culture mixing (< 2 W m⁻³).

     

Life cycle assessment of biomass production in microalgae compact photobioreactors

This paper presents a life cycle assessment (LCA) of industrial scale microalgae biomass production in compact photobioreactor (PBR) systems (2 × 5 × 8 m) for supplying biofuel/electricity generation processes and synthesis of new materials. Other objectives are as follows: (i) to compare the impact of various raw materials, substances, and services; and (ii) to evaluate environment‐relevant aspects of the proposed system as compared to microalgae raceway ponds. The life cycle inventory assessment shows that (i) only atmospheric CO₂ is used for PBR microalgae cultivation, whereas in raceway ponds, injection of CO₂ from fossil origin is largely required to allow for microalgae growth; and (ii) the PBR daily production rate of dry biomass is currently at 1.5 kg m^?3 day^?1 for each PBR, which is 12.82 times larger than the reported average 0.117 kg m^?3 day^?1 raceway ponds production. It is found that in general the association of the effects of the production of steel, PVC, and the packaging contribute to more than 85% of the total impact in each analyzed category. Therefore, to achieve PBR biomass production impact reduction and sustainability, PVC and steel utilization need to be minimized, as well as packaging materials. Based on the PBR LCA results, that is, due to no CO₂ injection from fossil origin and low area occupation, it is expected that high density production of truly renewable microalgae biomass could be obtained from PBR systems.     

Productivity correlated to photobiochemical performance of <Emphasis Type="Italic">Chlorella</Emphasis> mass cultures grown outdoors in thin-layer cascades

This work aims to: (1) correlate photochemical activity and productivity, (2) characterize the flow pattern of culture layers and (3) determine a range of biomass densities for high productivity of the freshwater microalga Chlorella spp., grown outdoors in thin-layer cascade units. Biomass density, irradiance inside culture, pigment content and productivity were measured in the microalgae cultures. Chlorophyll-fluorescence quenching was monitored in situ (using saturation-pulse method) to estimate photochemical activities. Photobiochemical activities and growth parameters were studied in cultures of biomass density between 1 and 47 g L⁻¹. Fluorescence measurements showed that diluted cultures (1–2 g DW L⁻¹) experienced significant photostress due to inhibition of electron transport in the PSII complex. The highest photochemical activities were achieved in cultures of 6.5–12.5 g DW L⁻¹, which gave a maximum daylight productivity of up to 55 g dry biomass m⁻² day⁻¹. A midday depression of maximum PSII photochemical yield (F _v/F _m) of 20–30% compared with morning values in these cultures proved to be compatible with well-performing cultures. Lower or higher depression of F _v/F _m indicated low-light acclimated or photoinhibited cultures, respectively. A hydrodynamic model of the culture demonstrated highly turbulent flow allowing rapid light/dark cycles (with frequency of 0.5 s⁻¹) which possibly match the turnover of the photosynthetic apparatus. These results are important from a biotechnological point of view for optimisation of growth of outdoor microalgae mass cultures under various climatic conditions.     

The effect of light, salinity, and nitrogen availability on lipid production by Nannochloropsis sp

We examined responses of batch cultures of the marine microalga Nannochloropsis sp. to combined alterations in salinity (13, 27, and 40 g/l NaCl) and light intensity (170 and 700 μmol photons/m²·s). Major growth parameters and lipid productivity (based on total fatty acid determination) were determined in nitrogen-replete and nitrogen-depleted cultures of an initial biomass of 0.8 and 1.4 g/l, respectively. On the nitrogen-replete medium, increases in light intensity and salinity increased the cellular content of dry weight and lipids due to enhanced formation of triacylglycerols (TAG). Maximum average productivity of ca. 410 mg TFA/l/d were obtained at 700 μmol photons/m²·s and 40 g/l NaCl within 7 days. Under stressful conditions, content of the major LC-PUFA, eicosapentaenoic acid (EPA), was significantly reduced while TAG reached 25% of biomass. In contrast, lower salinity tended to improve major growth parameters, consistent with less variation in EPA contents. Combined higher salinity and light intensity was detrimental to lipid productivity under nitrogen starvation; biomass TFA content, and lipid productivity amounted for only 33% of DW and ca. 200 mg TFA/l/day, respectively. The highest biomass TFA content (ca. 47% DW) and average lipid productivity of ca. 360 mg TFA/l/day were achieved at 13 g/l NaCl and 700 μmol photons/m²·s. Our data further support selecting Nannochloropsis as promising microalgae for biodiesel production. Moreover, appropriate cultivation regimes may render Nannochloropsis microalgae to produce simultaneously major valuable components, EPA, and TAG, while sustaining relatively high biomass growth rates.     

Studies on mixed mass cultivation of Anabaena spp. (nitrogen-fixing blue-green algae, cyanobacteria) on a large scale

Studies on mixed mass cultivation of Anabaena spp. on a large scale (5170m²) were conducted continuously for 3 years. Under the continental monsoon climate in northern subtropics (30°N, 115°E), 7–11 g dry weight m⁻² day⁻¹ of microalgal biomass on average was harvested in simple plastic greenhouses in the effective growth days during the warmer seasons. The maximum productivity was 22 g m⁻² day⁻¹ in the middle of summer. Observations on the productive properties of strains of Anabaena spp. indicated that they were different from and could compensate for each other in their productivities and adaptations to the seasonal changes. With different lining materials (PVC sheets, concrete, sand and soil) in the culture ponds, no significant variation of productivity was found, but bubbling with biogas in the middle of the day and the application of some growth regulating substances (2,4-D, NaHSO₃ and extracts of oyster mushroom spawn) was able to improve the production. The cost of microalgal biomass in this way was around 0·75–1·0 US dollar(s) per kilogram.     

Evaluation of microalgal consortia for treatment of primary treated sewage effluent and biomass production

The present investigation was aimed towards analyzing the potential of consortia of native filamentous microalgal strains (MC2), native unicellular microalgal strains (MC3), and selected microalgae from germplasm (MC1) in terms of nutrient removal, water quality improvement, and biomass production using primary treated sewage water. Highest NO₃-N (90 %) and PO₄-P (97.8 %) removal was obtained with MC2-inoculated sewage water. Highest decrease in total dissolved solids to 806 from 1,120 mg L^?1 and highest increase in dissolved oxygen of 9.0 from 0.4 mg L^?1 were obtained using MC2-inoculated sewage water on the sixth day. The biomass production was also highest in MC2 (1.07 g L^?1) followed by MC1 and MC3 (0.90 and 0.94 g L^?1, respectively) on the sixth day. The consortium of filamentous strains from native environment not only proved promising in nutrient removal efficiency but also led to enhanced biomass. The present study highlighted the utility of such a consortium for sewage wastewater treatment and the promise of sewage water as a growth medium for biomass production.     

Physiological responses of carbon-sequestering microalgae to elevated carbon regimes

In order to identify a high carbon-sequestering microalgal strain, the physiological effect of different concentrations of carbon sources on microalgae growth was investigated. Five indigenous strains (I-1, I-2, I-3, I-4 and I-5) and a reference strain (I-0: Coccolithus pelagicus 913/3) were subjected to CO₂ concentrations of 0.03–15% and NaHCO₃ of 0.05–2 g CO₂ l^–1. The logistic model was applied for data fitting, as well as for estimation of the maximum growth rate (μ_max) and the biomass carrying capacity (B_max). Amongst the five indigenous strains, I-3 was similar to the reference strain with regards to biomass production values. The B_max of I-3 significantly increased from 214 to 828 mg l^–1 when CO₂ concentration was increased from 0.03 to 15% (r = 0.955, P = 0.012). Additionally, the B_max of I-3 increased with increasing NaHCO₃ (r = 0.885, P = 0.046) and was recorded at 153 mg l^–1 (at 0.05 g CO₂ l^–1) and 774 mg l^–1 at (2 g CO₂ l^–1). Relative electron transport rate (rETR) and maximum quantum yield (F_v/F_m) were also applied to assess the impact of elevated carbon sources on the microalgal cells at the physiological level. Isolate I-3 displayed the highest rETR confirming its tolerance to higher quantities of carbon. Additionally, the decline in F_v/F_m with increasing carbon was similar for strains I-3 and the reference strain. Based on partial 28s ribosomal RNA gene sequencing, strain I-3 was homologous to the ribosomal genes of Chlorella sp.     

Growth,lipid content,productivity, and fatty acid composition of tropical microalgae for scale‐up production

Biomass and lipid productivity, lipid content, and quantitative and qualitative lipid composition are critical parameters in selecting microalgal species for commercial scale‐up production. This study compares lipid content and composition, and lipid and biomass productivity during logarithmic, late logarithmic, and stationary phase of Nannochloropsis sp., Isochrysis sp., Tetraselmis sp., and Rhodomonas sp. grown in L1‐, f/2‐, and K‐medium. Of the tested species, Tetraselmis sp. exhibited a lipid productivity of 3.9–4.8 g m^?2 day^?1 in any media type, with comparable lipid productivity by Nannochloropsis sp. and Isochrysis sp. when grown in L1‐medium. The dry biomass productivity of Tetraselmis sp. (33.1–45.0 g m^?2 day^?1) exceeded that of the other species by a factor 2–10. Of the organisms studied, Tetraselmis sp. had the best dry biomass and/or lipid production profile in large‐scale cultures. The present study provides a practical benchmark, which allows comparison of microalgal production systems with different footprints, as well as terrestrial systems. Biotechnol. Bioeng. 2010;107: 245–257. © 2010 Wiley Periodicals, Inc.     

Effect of nitrate feeding strategies on lipid and biomass productivities in fed-batch cultures of Nannochloropsis gaditana

Controlled nitrate feeding strategies for fed-batch cultures of microalgae were applied for the enhancement of lipid production and microalgal growth rates. In particular, in this study, the effect of nitrate feeding rates on lipid and biomass productivities in fed-batch cultures of Nannochloropsis gaditana were investigated using three feeding modes (i.e., pulse, continuous, and staged) and under two light variations on both lipid productivity and fatty acid compositions. Higher nitrate levels negatively affected lipid production in the study. Increasing the light intensity increased the lipid contents of the microalgae in all three fed-batch feeding modes. A maximum of 58.3% lipid- to dry weight ratio was achieved when using pulse-fed cultures at an illumination of 200 μmol photons m⁻² s⁻¹ and 10 mg/day of nitrate feeding. This condition also resulted in the maximum lipid productivity of 44.6 mg L⁻¹ day⁻¹. The fatty acid compositions of the lipids consisted predominantly of long-chain fatty acids (C:16 and C:18) and accounted for 70% of the overall fatty acid methyl esters. Pulse feeding mode was found to significantly enhance the biomass and lipid production. The other two feeding modes (continuous and staged) were not ideal for lipid and biomass production. This study demonstrates the applicability of pulse feeding strategies in fed-batch cultures as an appropriate cultivation strategy that can increase both lipid accumulation and biomass production.     

Photosynthetic performance of a cyanobacterium in a vertical flat-plate photobioreactor for outdoor microalgal production and fixation of CO2

A vertical flat-plate photobioreactor was developed for the outdoor culture of microalgae using sunlight as the light source. The ability for biomass production and CO₂ fixation was evaluated by using a cyanobacterium, Synechocystis aquatilis SI-2. The average areal productivity was 31 g biomass m^–2 d^–1, which corresponded to a CO₂ fixation rate of 51 g CO₂ m^–2 d^–1, sustainable in the northern region of Japan during the winter time (January and February). The relationships between the efficiency of solar energy utilization of the reactor and its effect factors (cell concentration and irradiation) were investigated.     

Conversion of NaHCO3 to Na2CO3 with a growth of Arthrospira platensis cells in 660 m2 raceway ponds with a CO2 bicarbonation absorber

The weight ratio of Na₂CO₃/NaHCO₃ was investigated in order to improve microalgal productivity in large-scale industrial operations by converting NaHCO₃ to Na₂CO₃ with a growth of Arthrospira platensis cells in 660 m² raceway ponds. Two microalgal cultivation systems with a NaHCO₃ by-product (SPBP) and a CO₂ bicarbonation absorber (CBAP) were firstly thoroughly introduced. There was a 13.3% decrease in the initial weight ratio of Na₂CO₃/NaHCO₃ resulting in a 25.3% increase in the biomass growth rate with CBAP, compared to that of SPBP. Increased sunlight intensity, solution temperature and pH all resulted in both a higher absorbance and release, thereby increasing the weight ratio of Na₂CO₃/NaHCO₃ during the growth of A. platensis. The biomass growth rate was peaked at 39.9 g m⁻² day⁻¹ when the weight ratio of Na₂CO₃/NaHCO₃ was 3.7. Correspondingly, the cell pigments (chlorophyll a and carotenoid) and trichome size (helix pitch and trichome length) reached to a maximum state of 8.47 mg l⁻¹, 762 μg l⁻¹, 57 and 613 μm under the CBAP system.     

Cultivation, photobioreactor design and harvesting of microalgae for biodiesel production: A critical review

Microalgae have the ability to mitigate CO₂ emission and produce oil with a high productivity, thereby having the potential for applications in producing the third-generation of biofuels. The key technologies for producing microalgal biofuels include identification of preferable culture conditions for high oil productivity, development of effective and economical microalgae cultivation systems, as well as separation and harvesting of microalgal biomass and oil. This review presents recent advances in microalgal cultivation, photobioreactor design, and harvesting technologies with a focus on microalgal oil (mainly triglycerides) production. The effects of different microalgal metabolisms (i.e., phototrophic, heterotrophic, mixotrophic, and photoheterotrophic growth), cultivation systems (emphasizing the effect of light sources), and biomass harvesting methods (chemical/physical methods) on microalgal biomass and oil production are compared and critically discussed. This review aims to provide useful information to help future development of efficient and commercially viable technology for microalgae-based biodiesel production.     

Optimization of a raceway pond system for wastewater treatment: a review

Microalgae are photosynthetic microorganisms with potential for biofuel production, CO₂ mitigation and wastewater treatment; indeed they have the capacity to assimilate pollutants in wastewaters. Light supply and distribution among the microalgae culture is one of the major challenges of photo-bioreactor design, with many studies focusing on microalgae culture systems such as raceway ponds (RWP), widely used and cost-effective systems for algal biomass production. This review focuses on possible improvements of the RWP design in order to achieve optimal microalgal growth conditions and high biomass productivities, to minimize energy consumption and to lower the capital costs of the pond. The improvement strategy is based on three aspects: (1) hydrodynamic characteristics of the raceway pond, (2) evaluation of hydrodynamic and mass transfer capacities of the pond and (3) design of the RWP. Finally, a possible optimal design for the RWP is discussed in the context of wastewater treatment.     

Effect of organic carbon,C:N ratio and light on the growth and lipid productivity of microalgae/cyanobacteria coculture

Current culture methods based on monocultures under phototrophic regimes are prone to contamination, predation, and collapse. Native cultures of multiple species are adapted to the local conditions and are more robust against contamination and predation. Growth, lipid and biomass productivity of a Louisiana native coculture of microalgae (Chlorella vulgaris) and cyanobacteria (Leptolyngbya sp.) in heterotrophic and mixotrophic regimes were investigated. Dextrose and sodium acetate at C:N ratios of 15:1 and 30:1 under heterotrophic (dark) and mixotrophic (400 μmol m^?2 s^?1) regimes were compared with autotrophic controls. The carbon source and C:N ratio impacted growth and biomass productivity. Mixotrophic cultures with sodium acetate (C:N 15:1) resulted in the highest mean biomass productivity (156 g m^?3 d^?1) and neutral lipid productivity (24.07 g m^?3 d^?1). The maximum net specific growth rate (U) was higher (0.97 d^?1) in mixotrophic cultures with dextrose (C:N 15:1) but could not be sustained resulting in lower total biomass than in mixotrophic cultures with acetate (C:N 15:1), with a U of 0.67 d^?1. The ability of the Louisiana coculture to use organic carbon for biomass and lipid production makes it a viable feedstock for biofuels and bioproducts.